Preparation and properties of siloxane liquid crystalline elastomers with a mesogenic crosslinking agent

A mesogenic crosslinking agent M-1 was synthesized to minimize the perturbations of non-mesogenic crosslinking agents in liquid crystalline elastomers. The synthesis of new side chain liquid crystalline elastomers containing the rigid mesogenic crosslinking agent M-1 and nematic monomer M-2 by a one-step hydrosilylation reaction is described. The chemical structures of the monomers and network polymers obtained were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties and phase behaviour were investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The influence of the crosslinking units on phase behaviour is discussed. Liquid crystalline elastomers containing less than 15 mol % of the crosslinking units showed elasticity, reversible phase transitions and a threaded texture. The experimental results demonstrated that the glass transition temperature of polymers P-1-7 increased with increasing concentration of crosslinking agent M-1; but the isotropic temperature and liquid crystalline range decreased slightly.     

Luminescent Iridium-containing liquid crystalline polymers in the side chain

Luminescent liquid crystalline polymers consisting of Iridium attached to polysiloxanes are prepared. 4-Cyanophenyl 4-(allyloxy) benzoate (M₁) and an Iridium complex (Ir-M₂) grafted to poly(methylhydrogeno)siloxane are used for the preparation of the Iridium-containing liquid crystalline polymers. The chemical structures are characterised by Fourier transform infrared spectroscopy and ¹H NMR. The mesomorphic properties and phase behaviour are investigated by differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy and X-ray diffraction. The polymers containing <1.2 mol% of the Iridium ions reveal reversible mesomorphic phase transition, wide mesophase temperature ranges and high thermal stability. The introduction of the Iridium ions does not change the liquid crystalline state of polymer systems; on the contrary, the polymers are enabled with the luminescent properties. With the Iridium ion contents ranging between 0.3 and 1.2 mol%, luminescent intensity of polymers gradually increased. The temperature dependence of luminescent intensity was studied in the liquid crystalline phase.     

Synthesis and properties of polysiloxane side chain cholesteric elastomers

The synthesis of new side chain cholesteric liquid crystalline elastomers containing the flexible non-mesomorphic crosslinking agent M-1 and the cholesteric monomer M-2 by a one-step hydrosilylation reaction is described. The chemical structures of the obtained monomers and network polymers were confirmed by ¹H NMR and FTIR spectroscopy. The mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The glass transition temperatures and isotropic temperatures of the mesomorphic elastomers decreased as the concentration of crosslinking units increased; in the mesomorphic region the liquid crystalline elastomers showed elasticity, reversible phase transitions and Grandjean texture. The flexible crosslinking agent did not disturb the cholesteric structure; moreover, it was beneficial for adjusting the helix of the cholesteric liquid crystalline polymers, and cholesteric elastomers P-6, P-7, show reversible selective reflection of visible light.     

Synthesis and characterization of side‐chain liquid‐crystalline poly(ethyleneimine)s with cyanobiphenyl groups

A series of polyethyleneimine‐based side‐chain liquid‐crystalline polymers substituted with different ratios of cyanobiphenyl as pendent mesogenic groups has been synthesized in which the spacer length varies between two and six methylene units. The structures of the synthesized polymers are confirmed by infrared and ¹H nuclear magnetic resonance spectroscopy. The thermal properties of these polymers have been investigated using differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. The results indicate that the thermal behaviour of the polymers is strongly dependent on the degree of substitution. Polymers containing more than 69% of mesogenic groups exhibit nematic‐type thermotropic liquid‐crystalline behaviour with schlieren textures. Below this limit, the polymers are amorphous. Polymers with a higher degree of substitution present the crystalline states. The phase transition temperatures increase and the mesomorphic temperature ranges widen with increasing degree of substitution. The clearing temperatures decrease as the spacer length increases. An odd–even effect in the clearing temperatures is observed and the odd members display the higher values.     

Side‐chain cholesteric liquid‐crystalline elastomers derived from smectic crosslinking units: Synthesis and phase behavior

New side‐chain cholesteric liquid‐crystalline elastomers containing cholesteryl 4‐allyloxybenzoate as cholesteric mesogenic units and biphenyl 4,4′‐bis(10‐undecen‐1‐ylenate) as smectic crosslinking units were synthesized. The chemical structures of the olefinic compounds and polymers obtained were confirmed by element analysis, Fourier transform infrared, proton nuclear magnetic resonance, and carbon‐13 nuclear magnetic resonance spectra. The mesogenic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The influence of the concentration of the crosslinking unit on the phase behavior of the elastomers was examined. The elastomers containing less than 17 mol % of the crosslinking units revealed elasticity, reversible mesomorphic phase transition, wider mesophase temperature ranges, and higher thermal stability. The experimental results demonstrated that the glass‐transition temperature, isotropization temperature, and mesophase temperature ranges decreased with an increasing concentation of the crosslinking unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5262–5270, 2004     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

Preparation and characterization of side-chain liquid crystalline polymers containing chenodeoxycholic acid residue

A series of new side-chain liquid crystalline polymers containing chenodiol residue derived from 24-[4′-hydroxybiphenyl-4-yl-4-(allyloxy)benzoyloxy]-3α,7α-di{n-[4′-(4-ethoxybenzoyloxy)biphenyl-4-yloxy]-n-oxoalkanoyloxy}-5β-cholane was designed and prepared. The chemical structures of the monomer and polymer were confirmed by Fourier transform infrared and ¹H NMR spectra. The mesomorphic properties of monomer and polymer were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction. The side-chain liquid crystalline polymers revealed wide mesophase temperature range and high thermal stability, and they showed nematic liquid crystalline phase. The influence of flexible space group length on thermal properties and specific rotation was examined.     

Novel photo‐crosslinkable liquid crystalline polymers containing vanillylidene cycloalkanones and azobenzene units

Two series of novel liquid crystalline photo‐crosslinkable bis(vanillylidene‐azobenzene) cycloalkanone containing polymers, namely poly(vanillylidene alkyloxy‐4,4′‐azobenzenedicarboxylic ester)s, have been synthesised from bis[m‐hydroxyalkyloxy(vanillylidene)cycloalkanone] (m = 6, 8, 10) with azobenzene dicarbonylchloride by solution polycondensation method at ambient temperature. Polymers with varying spacer lengths have been synthesised and characterised by spectroscopic techniques. These variations have been correlated with the thermal properties and transition temperatures. Thermal transitions were analysed by differential scanning calorimetry (DSC) and the mesophases were identified by hot stage optical polarised microscopy (HOPM). All of the polymers were found to exhibit liquid crystalline properties. Transition temperatures were observed to decrease with increasing spacer length. The thermogravimetric analysis reveals that all of the polymers were stable up to 280°C undergo two‐stage decomposition. Using the UV–visible photolysis studies we investigated the simultaneous behaviour of reactivity rates of crosslinking in the vanillylidene unit and isomerisation caused by the azobenzene unit in the photo‐crosslinkable main chain liquid crystalline polymers. The photolysis of liquid crystalline bis(vanillylidene)cycloalkanone‐based polymers reveals that there are two kinds of photoreactions in these systems: the EZ photoisomerisation of azobenzene unit and 2p+2p addition by vanillylidene units. The EZ photoisomerisation in the liquid crystal phase disrupts the parallel stacking of the mesogens, resulting in the transition from the liquid crystal phase to isotropic phase. The photoreaction involving 2p+2p addition of the bis(vanillylidene)cycloalkanone units in the polymers results in the conjoining of the chains. The cyclopentanone polymers exhibited a faster rate of photolysis than the cyclohexanone polymers.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

Novel photo-crosslinkable liquid crystalline polymers containing vanillylidene cycloalkanones and azobenzene units

Two series of novel liquid crystalline photo-crosslinkable bis(vanillylidene-azobenzene) cycloalkanone containing polymers, namely poly(vanillylidene alkyloxy-4,4'-azobenzenedicarboxylic ester)s, have been synthesised from bis[m-hydroxyalkyloxy(vanillylidene)cycloalkanone] (m = 6, 8, 10) with azobenzene dicarbonylchloride by solution polycondensation method at ambient temperature. Polymers with varying spacer lengths have been synthesised and characterised by spectroscopic techniques. These variations have been correlated with the thermal properties and transition temperatures. Thermal transitions were analysed by differential scanning calorimetry (DSC) and the mesophases were identified by hot stage optical polarised microscopy (HOPM). All of the polymers were found to exhibit liquid crystalline properties. Transition temperatures were observed to decrease with increasing spacer length. The thermogravimetric analysis reveals that all of the polymers were stable up to 280°C undergo two-stage decomposition. Using the UV-visible photolysis studies we investigated the simultaneous behaviour of reactivity rates of crosslinking in the vanillylidene unit and isomerisation caused by the azobenzene unit in the photo-crosslinkable main chain liquid crystalline polymers. The photolysis of liquid crystalline bis(vanillylidene)cycloalkanone-based polymers reveals that there are two kinds of photoreactions in these systems: the EZ photoisomerisation of azobenzene unit and 2p+2p addition by vanillylidene units. The EZ photoisomerisation in the liquid crystal phase disrupts the parallel stacking of the mesogens, resulting in the transition from the liquid crystal phase to isotropic phase. The photoreaction involving 2p+2p addition of the bis(vanillylidene)cycloalkanone units in the polymers results in the conjoining of the chains. The cyclopentanone polymers exhibited a faster rate of photolysis than the cyclohexanone polymers.     

Mesomorphic properties of copolyesters of 3,6-linked triphenylene-based units and polymethylene spacers

Main chain discotic liquid crystalline polymers consisting of triphenylene-based units and alkyl spacers (C8, C10 and C12), connected by ester linkages in the 3- and 6-positions of triphenylene, have been synthesized and their mesomorphic properties were studied by DSC, polarizing optical microscopy and X-ray diffraction. It was found that these polymers exhibit a hexagonal columnar (Col_h) mesophase with intracolumnar order over a wide temperature range. The clearing temperature decreases on increasing the spacer length. It was found that the clearing temperatures are rather higher than that of the corresponding triphenylene monomer having six hexyloxy chains. These polymers form an ordered columnar mesophase, while the corresponding monomeric mesogen shows a disordered columnar phase. In the polymeric system, the fluctuations of the disc-like units in the mesophase are restricted by the connection of the mesogenic units, which stabilizes the columnar mesophase.     

Mesomorphic properties of copolyesters of 3,6-linked triphenylene-based units and polymethylene spacers

Main chain discotic liquid crystalline polymers consisting of triphenylene-based units and alkyl spacers (C8, C10 and C12), connected by ester linkages in the 3- and 6-positions of triphenylene, have been synthesized and their mesomorphic properties were studied by DSC, polarizing optical microscopy and X-ray diffraction. It was found that these polymers exhibit a hexagonal columnar (Col h ) mesophase with intracolumnar order over a wide temperature range. The clearing temperature decreases on increasing the spacer length. It was found that the clearing temperatures are rather higher than that of the corresponding triphenylene monomer having six hexyloxy chains. These polymers form an ordered columnar mesophase, while the corresponding monomeric mesogen shows a disordered columnar phase. In the polymeric system, the fluctuations of the disc-like units in the mesophase are restricted by the connection of the mesogenic units, which stabilizes the columnar mesophase.     

New hydrocarbon side chain liquid crystalline polysiloxane polymers: Synthesis,characterization, and thermotropic behavior

A series of new and high-purity hydrocarbon liquid crystal monomers were synthesized through the acylation reaction, deoxygenation reaction, and Grignard reaction. ¹H-NMR spectra and elemental analyses were used to examine their purity. The liquid crystalline polysiloxane polymers were obtained by grafting the monomers onto poly(methylhydrosiloxane). The thermal transition temperature, mesomorphic properties, and mesophase textures of the monomers and the polymers were determined by differential scanning calorimetry (dsc), polarized optical microscopy, and X-ray diffraction analysis. Moreover, we observed the even–odd effect of the smectic/isotropic transition temperature with the length variation of the substituents. In this study, we found by X-ray diffraction that the liquid crystalline polysiloxane polymers undergo a transition from smectic B to smectic E mesophase. However, dsc has difficulty detecting the phase transition process. By considering the spin–lattice relaxation time (T₁), we can systematically explain the relation between the flexibility of the substituent with the smectic/isotropic transition temperature. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2849–2863, 1998     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4'-allyloxybiphenyl 4'-ethoxybenzoate, M₁), a chiral crosslinking agent (isosorbide 4-allyloxybenzoyl bisate, M₂) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂. The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X-ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂-P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145-209.6°C, with no changed on the cooling. Polymers P₄-P₇, with more than 6 mol % of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15 mol % of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

Playing with PtII and ZnII Coordination to Obtain Luminescent Metallomesogens

Blue–green luminescent terpyridine-containing Pt^II and Zn^II complexes are reported. Equipped with lipophilic gallate units, which act as monodentate ancillary coordinating ligands and/or as anions, they display low-temperature mesomorphic properties (lamello-columnar and hexagonal mesophases for Pt^II and Zn^II complexes, respectively). The mesomorphic properties were investigated by polarised optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray scattering of bulk materials and oriented thin films. The model of self-assembly into the lamello-columnar phase of the Pt^II complex has been described in detail. The optical properties of the complexes were investigated in the liquid and condensed liquid crystalline states, highlighting the delicate balance between the role of the metal in determining the type of excited state responsible for the emission, and the role of the ancillary ligand in driving intermolecular interactions for proper mesophase formation.     

Side-chain cholesteric liquid crystalline elastomers derived from a mesogenic crosslinking agent: I. Synthesis and mesomorphic properties

The synthesis of new side-chain cholesteric elastomers derived from a cholesteric monomer and mesogenic crosslinking agent is presented. The chemical structures of the monomers obtained were confirmed by elemental analyses, FT-IR, ¹H NMR, and ¹³C NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarizing optical microscopy (POM), and X-ray diffraction (XRD) measurements. M₁ showed cholesteric phase, and M₂ displayed enantiotropic nematic phase and monotropic smectic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

Photoreactive main‐chain liquid‐crystalline polyesters: Synthesis,characterization, and photochemistry

Three series of semiflexible and rigid main‐chain polyesters containing photoreactive mesogenic units derived from p‐phenylenediacrylic acid (PDA) and cinnamic acid have been synthesized by high‐temperature polycondensation. The thermal and mesomorphic properties of the polymers have been determined. The photochemical behavior of polymer P‐[1]‐T, which contains a PDA unit, has been studied both in solution and in films. In solution, [2+2] photocycloaddition, E/Z photoisomerization, and photo‐Fries rearrangement can take place. In contrast, the dominant process in spin‐coated films is the [2+2] photocycloaddition reaction, which causes crosslinking of the polymer. In films, the photochemistry and induction of anisotropy are strongly influenced by the aggregation of the PDA phenylester unit. A dichroism of about 0.2 has been induced in films by irradiation with linearly polarized UV light, and thus the capability of these films to induce optical anisotropy and align liquid crystals has been demonstrated. Liquid‐crystalline cells have been made with polarized irradiated films of P‐[1]‐T as aligning layers. A commercial liquid‐crystalline mixture has been used for this study, and a similar liquid‐crystalline order determined by polarized Fourier transform infrared to a commercial cell with rubbed polyimide as an aligning layer has been detected. Because of crosslinking of the irradiated P‐[1]‐T photoaligning layer, the photoinduced anisotropy is stable at high temperatures, and the liquid‐crystalline molecules are insoluble in the irradiated polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4907–4921, 2005     

Synthesis and liquid crystalline properties of a series of cholesterol‐based dimesogenic compounds

The synthesis and mesomorphic properties of a series of novel dimesogenic compounds containing the cholesteryl ester unit and a phenyl benzoate group are reported. The two mesogenic units of these compounds are linked through dicarboxylic ester bonds, with alkylene spacer lengths of 2, 4, 6 and 8 methylene units. The chemical structures and liquid crystalline properties of this series of compounds were characterized by FTIR, ¹H NMR, hot stage‐coupled polarizing microscopy and DSC. The results show that this series of compounds are cholesteric liquid crystals over a wide range, both during heating and cooling, and they exhibit iridescent colours in the liquid crystalline state.