Novel discotic liquid crystal oligomers: 1,3,5-triazine-based triphenylene dimer and trimer with wide mesophase

Series of novel 1,3,5-triazine-based triphenylene oligomers 7, 10 and 12 with large bridging polyaromatic core were designed and synthesised by simple procedures in high yields. Their structures were confirmed by FTIR, ¹H NMR, ESI-MS and elemental analyses. Their mesomorphic behaviours were studied by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. 1,3,5-triazine-based triphenylene monomer 7 has no mesomorphic property, but 1,3,5-triazine-based triphenylene dimer 10 and 1,3,5-triazine-based triphenylene trimer 12 possess excellent mesomorphic properties. The mesomorphic temperature range of compound 12 was as wide as 180°C. These studies indicated that the mesomorphic properties were determined by the numbers of triphenylene units. More units of triphenylene in the oligomers resulted in better mesomorphic properties.     

Novel room-temperature perylene liquid crystals: synthesis of 1,7-dibrominated cholesterol–perylene bisimides with different ester-bridging chains and their mesomorphic properties

Three novel 1,7-dibrominated cholesterol–perylene liquid crystals 6a, 6b and 6c with different ester-bridging chains were designed and synthesised in yields of 30–40%. Their structures were characterised by FT-IR, ¹H NMR and HR-MS spectra. Their mesomorphic behaviours were studied by differential scanning calorimetry (DSC), polarising optical microscopy (POM) and X-ray diffraction (XRD). Compounds 6a, 6b and 6c exhibit hexagonal columnar liquid crystalline phase at room temperature. Their mesomorphic temperature ranges are as wide as 140–162°C. Their fluorescence spectra suggested that they possess good fluorescence properties in solution. The soft ester-bridging chains are more favourable for room-temperature mesophase and high fluorescence than the rigid ester-bridging chain.     

Synthesis and mesomorphic properties of calix[4]resorcinarene–triphenylene oligomers

By controlling the mol ratios of reactants, novel calix[4]resorcinarene–triphenylene monomer, dimer and tetramer were designed and synthesised in yields of 50–60% via Click chemistry. Their structures were characterised by NMR and MS. Their liquid crystalline behaviours were studied by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction analysis. The more triphenylene units on calix[4]resorcinarene resulted in the wider temperature scopes of mesophase and higher phase transition temperatures. The monomer 6 and dimer 7 showed the mixed columnar mesophase with hexagonal columnar structure and disordered lamellar columnar structure, and compound 8 possessed only disordered lamellar columnar mesophase. These research results suggest that calix[4]resorcinarene was a good platform to construct columnar liquid crystal and the mesomorphic properties were greatly influenced by the substituted numbers of mesogen units on calix skeleton.     

Synthesis and mesomorphic properties of 7-alkoxybezopyrano[2,3-c]pyrazol-3-one

A new series of fused polyheterocyclic aromatic compounds, 7-alkoxybezopyrano[2,3-c]pyrazol-3-one (C- n BPP), were synthesised and characterised by infrared, ¹H-nuclear magnetic resonance (NMR), ¹³C-NMR and two-dimensional ¹H-¹³C cosy spectra. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. All of these compounds showed enantiotropic mesophases with temperature domains of 12–60°C and 22–69°C on heating and cooling processes for a carbon number of the alkoxy chain from 2 to 10. The effect of the length of the alkoxy chain on the mesomorphic properties was discussed. Comparison of C- n BPP and several kinds of coumarin derivatives indicated that the intermolecular hydrogen bonding acted as the driving force of the mesophase formation.     

Synthesis and mesomorphic properties of 2-(4′-alkoxybiphenyl-4-yl)-1H-benzimidazole derivatives

Three series of 2-(4′-alkoxybiphenyl-4-yl)-1H-benzimidazole derivatives (nM-x), which possessed 5-nitrobenzimidazole (nM-N series), benzimidazole (nM-H series) or 5-methylbenzimidazole (nM-M series) units at the end of the molecule, were synthesised and characterised by infrared, ¹H- and ¹³C-nuclear magnetic resonance spectra, electrospray ionisation-mass spectrometry and elemental analysis. Their phase transition behaviour was investigated by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. All the compounds exhibited enantiotropic smectic mesophases with wide temperature domains for a carbon number in the alkoxy chain from 6 to 16, where the mesophase ranges were 14–91°C and 17–99°C during heating and cooling processes for the nM-N compounds, 7–25°C and 8–49°C for the nM-H compounds and 48–81°C and 52–85°C for the nM-M compounds, respectively. The effect of the length of alkoxy chain on mesomorphic properties was discussed. The nM-N and nM-M exhibited a much wider mesophase range whether during heating or cooling process than the corresponding nM-H series, especially for the longer terminal chain (n > 8), which indicated that the substituent in the benzimidazole moiety was helpful in increasing the mesophase stability.     

Superfast Responsive Ionic Hydrogels: Effect of the Monomer Concentration

A series of strong polyelectrolyte gels were prepared in aqueous solution, using the sodium salt of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) as the monomer and N,N'‐methylene(bis)acrylamide (BAAm) as a crosslinker. The gels were both prepared below (?22°C) and above (25°C) the bulk freezing temperature of the water, producing cryogels and hydrogels, respectively. The crosslinker (BAAm) content was set at 17 mol%, while the initial monomer concentration C_o was varied over a wide range. It was found that, at ?22°C, a macroscopic network starts to form at an initial monomer concentration of as low as 0.1 w/v%. In contrast to the conventional hydrogels formed at 25°C, the cryogels have a discontinuous morphology consisting of polyhedral pores of sizes 10⁰–10² μm. The cryogels exhibit superfast swelling properties, as well as reversible swelling–deswelling cycles in water and acetone. An increase in the initial monomer concentration from 2.5 to 10% further increases the response rate of the cryogels due to the simultaneous increase of the porosity of the networks.     

Liquid crystalline polymers XII. Main chain thermotropic poly(arylidene-ether)s containing 4-tertiary-butyl-cyclohexanone moiety linked with polymethylene spacers

A new homologous series of thermally stable thermotropic liquid crystalline poly(arylidene-ether)s based on 4-tertiary-butyl-cyclohexanone moiety was synthesised by solution polycondensation of 4,4′-diformyl-α,ω-diphenoxyalkanes, I_a–f, or 4,4′-diformyl-2,2′-dimethoxy-α,ω-diphenoxyalkanes, II_a–f, with the 4-tertiary-butyl-cyclohexanone monomer. A model compound III was synthesised from the monomer with benzaldehyde and characterised by elemental and spectral analyses. The inherent viscosities of the resulting polymers were in the range of 0.18–0.92 dL/g. The mesomorphic properties of these polymers were studied as a function of the diphenoxyalkane space length. Their thermotropic liquid crystalline properties were examined by differential scanning calorimetry (DSC) and optical polarising microscopy and demonstrated that the resulting polymers form nematic mesophases over wide temperature ranges. The thermal properties of those polymers were evaluated by thermogravimetric analysis and DSC measurements and correlated to their structural units. X-ray analysis showed that polymers having some degree of crystallinity in the region 2θ = 5–60°. In addition, the morphological properties of selected examples were tested by scanning electron microscopy.     

Radiation effects of paraffins as polymer model compounds—II. Crosslinking determination by liquid chromatography

The G-values of crosslinking and chain scission of normal paraffins (C₂₀H₄₂, C₂₁H₄₄, C₂₃H₄₈ and C₂₄H₅₀) and squalane (C₃₀H₆₂) as the model compounds of polymers were determined by the measurements with a liquid chromatography (LC) after Co-60 γ-rays irradiation in solid and in liquid phases at -77, 25 and 55°C. The crosslinking products as dimer, trimer and the more polymeric products were well resolved and the relative yield of polymeric products increased with increasing dose. The G(cross-linking) of n-paraffins was 1.0 in the crystalline at -77°C and 1.15 in the crystalline at 25°C, and 1.7–1.8 in the liquid phase at 55°C of irradiation temperature. The G(crosslinking) of squalane was 1.3 in the glassy phase at -77°C and 1.6 in the liquid phase at 25 and 55°C. However, the chain scission products were too small to detect by the LC measurement, that is, the yield was estimated to be less than 1/10 of the crosslinking products.The unsaturations which appeared in u.v. detector of LC spectrum were observed in monomer, dimer, trimer and the more polymeric products, and the relative concentration was the higher in the more polymeric products, especially in liquid phase. So the molecules with unsaturation would react preferentially with other molecules as monomer or dimer to produce the polymeric products including the unsaturation.     

Stacking of triphenylene: characterization of the potential energy surface

The interaction potential energy of triphenylene dimer has been calculated with Møller–Plesset second-order perturbation theory for various geometrical configurations. Different types of geometrical perturbations such as rotation, displacements and their combinations are studied in terms of their effects on the stability of the dimer. Minimum energy conformers for face to face, rotated, parallel displaced and T-shape structures are obtained. For the unsubstituted triphenylene, the 35° rotation of one of the monomers results in the global minimum. However, the dimer is still very flexible in terms of displacements. A helical structure seems to be the most stable form for the trimer. For large stacked clusters, the two body forces dominate the interactions while at small monomer–monomer separation, three body terms behave like z ^?9 where z is the vertical distance between two adjacent monomers.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

DFT study on cooperativity in the interactions of hydrazoic acid clusters

Density functional theory at the B3LYP level with the 6‐311G** basis set is performed to calculate the systems consisting of up to four hydrazoic acid molecules. The dimers are found to exhibit cyclic and chain structures with N … H contacts at ca. 2.1–2.7 Å. However, there are only cyclic structures with N … H contacts at ca. 2.0–2.3 Å and 2.0–2.1 Å in the trimer and tetramer, respectively. Hydrogen bond distances in the trimer and tetramer are shorter than those in the cyclic dimer as a result of the stronger interaction between molecules. The contribution of cooperative effect to the interaction energy is significant. After the correction of the basis set superposition error and zero‐point energy, the binding energies are ?10.69, ?29.34, and ?54.26 kJ·mol^?1 for the most stable dimer, trimer, and tetramer, respectively. The calculated IR shifts for N? H stretching mode increase with the size of the cluster growths, reaching more than 200 cm^?1 in the tetramer. For the most stable clusters, the transition from the monomer to dimer, dimer to trimer, and trimer to tetramer involve changes of ?14.40, ?25.68, and ?31.88 kJ·mol^?1 for the enthalpies at 298.15 K and 1atm, respectively. We also perform Mulliken populations analysis and find the Mulliken populations on intermolecular N … H increasing in the sequence of the dimer, trimer, and tetramer. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 279–286, 2003     

Novel supramolecular columnar liquid crystals based on thiosemicarbazides

Novel liquid crystal materials based on 3,4-di-n-alkoxybenzoylthiosemicarbazides (3a–h, n = 5–10, 12, 14) were synthesised. The mesomorphic properties of these compounds were characterised and studied by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. Compound 3a did not show mesomorphic properties; 3b shows a monotropic hexagonal columnar (Col_h) phase. Compounds 3c–h display an enantiotropic Col_h phase. The mesomorphic properties were found to be dependent on the length of alkoxy side chains. In N,N-dimethylformamide solution, all the compounds displayed a room temperature emission with λ_max at 361–332 nm. A thermogravimetric analysis also was performed.     

Association Equilibrium of Methylene Blue by Spectral Titration and Chemometrics Analysis: A Thermodynamic Study

The monomer‐dimer equilibrium of methylene blue (MB, Scheme I) has been investigated by means of UV‐Visible spectroscopy in aqueous solutions. The self aggregation of MB in water has been investigated by recording absorption spectra in the wavelength range of 450–750 nm, and in different ionic strengths using concentrated KCl solutions in the temperature range of 20–90°C. Chemometrics analysis of the spectral data gave a dimerization constant, individual spectra of the monomer and dimer forms of the dye molecule. The quantitative analysis of the data of the undefined mixture was carried out by simultaneous resolution of the overlapping spectral bands in the whole set of absorption spectra. The dimerization constants of MB determined by mathematical deconvolution of the thermometric spectral titration data show dependency on temperature variations. The concentration range of MB was 6.00 × 10^?5‐3.00 × 10^?4 M. Utilizing the van't Hoff relation, which describes the dependence of the equilibrium constant on temperature, the thermodynamics parameters ΔH° and ΔS° of the aggregation process were determined. The compensation effect was verified by the thermodynamics results of the dimerization process of the dye.     

Thermotropic liquid–crystalline properties of 4,4′-dialkoxy-3,3′-diaminobiphenyl compounds and their precursors

A series of 4,4?-dialkoxy-3,3?-diaminobiphenyl compounds were synthesised by three-step procedure that involves alkylation, nitration and reduction reactions. Their chemical structures were characterised by FTIR, ¹H and ¹³C spectroscopy and elemental analysis. Their thermotropic liquid–crystalline (LC) properties were examined by a number of experimental techniques including differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarising optical microscopy (POM) and variable temperature X-ray diffraction (VT-XRD). The 4,4?-dialkoxy-3,3?-dinitrobipheyl compounds, precursors to the diamine compounds, were also examined for their thermotropic LC properties. POM studies of focal conic textures and VT-XRD of the 3,3?-diaminobiphenyl derivatives having flexible alkyl chains (C₆–C₁₂) exhibited the smectic A (SmA) phase independent of the length of alkyl chains. Similarly, the 3,3?-dinitrobiphenyl derivatives containing alkyl chains C₇, and C₉–C₁₁ exhibit the SmA phase, those containing C₈ formed the smectic C (SmC) phase and C₁₂ formed both the SmA and smectic B (SmB) phases, respectively. The 3,3?-diaminobiphenyl derivatives had excellent thermal stability in the temperature range of 237–329°C, while those of 3,3?-dinitrobiphenyl derivatives were in the temperature range of 270–321°C. The 3,3?-diaminobiphenyl derivatives emitted UV light both in chloroform and acetonitrile.     

Density Functional Theory Study of Hydrogen Bonds of Bipyridine with 1,3,5-Benzenetricarboxylic Acid

The hydrogen‐bonded dimer and trimer formed between 1,3,5‐benzenetricarboxylic acid and bipyridine have been investigated using a density functional theory (DFT) method and 6‐31++G** basis set. The interaction energies are ?45.783 and ?89.998 kJ·mol^?1 for the most stable dimer and trimer, respectively, after the basis set superposition error and zero‐point corrections. The formation of O–H...N hydrogen bonds makes O–H symmetric stretching modes in the dimer and trimer red‐shifted relative to those of the 1,3,5‐benzenetricarboxylic acid monomer. The natural bond orbit analysis shows that the inter‐molecular charge transfers are 0.60475e and 1.20225e for the dimer and trimer, respectively. Thermodynamic analysis indicates that the formation of trimer is an exothermic and spontaneous process at low and room temperature. A supramolecule can be constructed through the strong N···H–O intermolecular hydrogen bonds between bipyridine and 1,3,5‐benzenetricarboxylic acid, which is in good agreement with the experimental results.     

Wide-line 1H NMR and DSC study of mesomorphic transformations of p-(alkoxybenzylidene)-p′-toluidines

p-(Alkoxybenzylidene)-p′-toluidines (ABTs) with 7, 8, and 10 carbon atoms in the alkyl moiety have been studied by wide-line ¹H NMR and DSC. The thermotropic properties of these compounds have been studied in the temperature range 20–80°C, including main mesomorphic transformations of ABTs. The 1H NMR line shapes, widths, and second moments, as well as specific features of their temperature-induced changes, are discussed. The DSC data are compared with the character of mesomorphic transformations and ¹H NMR data. The formation limits and ranges and stabilities of liquid-crystalline states of the ABT structure emerging on heating are determined.     

Mesomorphic properties of side-chain cholesteric liquid-crystalline elastomers

New monomer cholesteryl 4-(10-undecylen-1-yloxybenzoyloxy)-4′-ethoxybenzoate (M₁), crosslinking agent biphenyl 4,4′-bis(10-undecylen-1-yloxybenzoyloxy-p-ethoxybenzoate) (M₂) and a series of side-chain cholesteric elastomers were prepared. The chemical structures of the monomers and elastomers obtained were confirmed by element analyses, FT-IR, and ¹H NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. The influence of the content of the crosslinking unit on the phase behavior of the elastomers was examined. M ₁ showed cholesteric phase, and M ₂ displayed nematic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

High-Molecular-Weight Alternating Copolymers from Thermal Copolymerizations of N-Alkylcitraconimides with Styrene

Radical copolymerizations of eight N-alkylcitraconimides (1) and styrene (2) were carried out in the presence or absence of a radical initiator. Alternating copolymers with number-average molecular weights higher than 7 × 10⁵ were obtained from the thermal copolymerizations (monomer molar ratio = 1:1) in bulk at 60°C. The spontaneous copolymerization is considered to be by induced radicals produced via an intermediate Diels-Alder dimer and minary a contact-type charge transfer complex between N-alkylcitraconimide and styrene. Thermogravimetric analyses indicate the resulting copolymers have high thermal stabilities.     

Anionic polymerization of 2,7‐di‐t‐butyldibenzofulvene: Synthesis,structure, and photophysical properties of the oligomers with a π‐stacked conformation

2,7‐Di‐t‐butyldibenzofulvene (tBu₂DBF), a bulky dibenzofulvene derivative, was polymerized using n‐butyllithium as initiator in tetrahydrofuran at ?78 °C and in toluene at 0 °C. tBu₂DBF afforded mainly oligomers up to trimer even at [monomer]₀/[initiator]₀ = 20 ([monomer]₀ = 0.2 M) at ?78 °C and 0 °C, indicating that this monomer is much less reactive than dibenzofulvene (DBF), its parent compound. The reaction at the same [monomer]₀/[initiator]₀ ratio at an elevated [monomer]₀ gave a small amount of insoluble polymer. The oligomers indicated a hypochromic effect in the absorption spectra and only monomer emission in the fluorescent spectra. The conformation of the trimer and the dimer was examined by means of NOESY NMR spectra and semiempirical calculations. In the trimer conformation, the fluorene moieties of the central and the initiation‐side monomeric units were found to be closely stacked on top of each other, while the termination‐side monomeric unit appeared to be in a faster conformational dynamics compared with the other monomeric units. Although the dimer seemed to have a relatively flexible conformation, a π‐stacked structure appeared to be involved in the conformational dynamics to show hypochromicity. The results of this study suggest that the reported intramolecular excited dimer (excimer) formation of the poly‐ and oligo(DBF)s [J Am Chem Soc 2003, 125, 15474] is based on a slight, local conformational change upon photo absorption, leading to a closer π‐stacked alignment of two neighboring fluorene units than that in the ground state. Such a local conformational transition may be difficult for the tBu₂DBF trimer because of steric repulsion of the t‐butyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 561–572, 2006     

Cholesteric star-shaped liquid crystals induced by a maltose core: synthesis and characteristics

Three esters of maltose (A1–A3) with 4–(4–(alkoxybenzoyloxy)phenoxy) –6–oxohexanoic acid (b1–b3) side-arms have been synthesised. All the maltose derivatives were laevo-rotationary, unlike their parent cores. The side arm b1 did not display liquid crystalline (LC) properties, and b2 and b3 displayed thermotropic nematic LC properties. The star-shaped compound (SSC) A1 with b1 side-arms did not display a mesomorphic phase. Unlike the nematic schlieren texture provided by side-arms b2 and b3, the star-shaped liquid crystals (SSLC) A2 and A3 displayed Grandjean and oily texture in the cholesteric phase. The results suggest that the LC properties of the side-arms have an important influence on the formation of LC properties in an SSC, and that the maltose core is important in determining the mesomorphic phase type. In other words, the SSC displayed LC properties only when the side-arms were also LC, and the maltose core induced a cholesteric phase in the SSLC with nematic side-arms. The mesomorphic regions for A2 and A3 were 39.1 and 53.7°C during the heating cycle and 63.8 and 107.0°C during the cooling cycle, respectively. The longer terminal chain rendered the mesomorphic region broader.