Proton NMR investigation of a hydrogen-bonded liquid crystal gel

Proton NMR is employed to determine director distributions in a hydrogen-bonded liquid crystal gel in the presence of a magnetic field. The samples consist of the mesogen 8CB mixed with small percentages of gelator, which forms a hydrogen-bonded network when the sample is cooled below the gelation point in the isotropic liquid. Since the gelation occurs above the clearing point, a non-oriented random director configuration is frozen in. The configuration of the hydrogen-bonded network is found to be isotropic. It fixes a preferential random local orientation of the nematic director, even in the presence of an external magnetic field of a few Tesla. The NMR spectra of the samples give information on orientation and order in such systems. A simple model for the director field is provided.     

Preparation and electro‐optical properties of polymer dispersed liquid crystal films with relatively low liquid crystal content

In this paper, polymer dispersed liquid crystals (PDLC) films with LC content as low as 40 wt% were prepared, and the electro‐optical properties were carefully investigated. To accomplish this, different (meth)acrylate copolymerizaiton monomers have been used. The electro‐optical properties and morphologies of the PDLC films were strongly influenced by the chemical structure of copolymerization monomers (hydroxypropyl methacrylate (HPMA), glycidyl methacrylate, hydroxypropyl acrylate) and their feed ratio. Lower driven voltage and higher contrast ratio were achieved when the PDLC films showed a morphology with suitably LC domain size. At high HPMA content, a thin polymer film was formed on the surface of PDLC samples, which is beneficial to decrease the total LC content in PDLC devices. Copyright © 2013 John Wiley & Sons, Ltd.     

A room-temperature heptazine core discotic liquid crystal

Heptazine is the fundamental structural and functional unit of graphitic carbon nitrides and has a π-conjugated planar symmetry with semiconducting properties. Molecular self-assembly is one of the key factors to drive the electronic behaviour of π-conjugated organic molecules. To enhance the semiconductivity, heptazine is decorated at its active sites with 2,3,5-tris(dodecyloxy)aniline to get well-organised columnar packing. A novel heptazine-core room-temperature discotic liquid crystal (HDLC) with hexagonal columnar geometry is discovered. The molecular structure and mesomorphic properties of HDLC are investigated by ¹H-NMR, ¹³C-NMR, IR, polarised optical microscopy, differential scanning calorimetry and X-ray diffraction. Photophysical and electrochemical properties of HDLC are studied by UV–vis/fluorescence spectroscopy and cyclic voltammetry (CV), respectively. The energy band gap of HDLC estimated from CV at room temperature is 1.63 eV, which is much narrower than the previously reported band gap for heptazine derivatives. This decrease in the energy band can be attributed to the particular designing of HDLC for columnar packing. As a columnar liquid crystal providing a smooth path to the charge transport, HDLC with such a narrow energy band gap may find applications in organic electronics.     

Polymerizable hexacatenar liquid crystals containing a luminescent oligo(p-phenylenevinylene) core

Polymerizable hexacatenar mesogens containing a photo-active oligo(p-phenylenevinylene) core were successfully synthesized by replacing the traditional n-alkoxy tails on the molecules with polymerizable hydrocarbon tails containing terminal isoprenyl or 1,3-dienyl units. It was found that for this particular liquid crystal (LC) platform, the incorporation of conventional radical polymerizable groups such as acrylates in the tails was not conducive to the formation of thermotropic LC phases, presumably due to their polar nature. The resulting photoluminescent isoprenyl and 1,3-dienyl hexacatenar monomers were found to form columnar hexagonal phases at elevated temperatures (c. 45–75°C), as determined by powder X-ray diffraction. Unfortunately, photoinitiated radical polymerization studies revealed that the mesogens are susceptible to photodegradation in the LC state at elevated temperatures, resulting in the loss of both LC order and emission properties during photopolymerization. Thermally initiated radical polymerization in the absence of light, however, afforded effective crosslinking with retention of both LC order and the desired emission properties. The resulting crosslinked columnar hexagonal phases were found to exhibit emission maxima at nearly identical wavelengths, with comparable intensities relative to the unpolymerized starting materials. The effect of the different polymerizable groups on the mesogenic behaviour, polymerization characteristics, and emission properties of the hexacatenar compounds is presented.     

A monotropic liquid crystal polyester with a biphasic nematic-smectic phase

The polyesters made from the condensation of isophthalic acid (IA) or terephthalic acid (TA) with the mesogenic diol 4,4′-bis (6-hydroxy hexoxy)biphenyl (BHHBP) are both reported to show a smectic mesophase. However, in our previous work, we found evidence for a mesophase in the polyester containing BHHBP and IA, but not in the one with BHHBP and TA. For the BHHBP-IA polyester, we thought the phase sequence on cooling was I → S_A → K, while on heating the situation was unresolved; there was some indication that on heating, a K → I transition occurs without any intervening mesophase. In other words, it was suspected that the mesophase in the IA polyester was monotropic. In this work, we have now obtained firm evidence that the mesophase behavior of the BHHBP-IA polyester is indeed monotropic. Further, an additional complexity has been found: on cooling, there is in fact a nematic phase, besides a smectic A, and a crystal phase. However, the mesophase appears to be complex. As the nematic and smectic textures occurred simultaneously, it seems that the mesophase is a nematic-smectic biphase. © 1996 John Wiley & Sons, Inc.     

Localised optical states in a structure formed by two oppositely handed cholesteric liquid crystal layers and a metal

A new model for observing localised optical states in a structure containing a cholesteric liquid crystal is proposed. The dependence of the mode frequency on the angle between directors at the interface of oppositely handed cholesterics is established. The effect of the metal layer thickness on localisation of light at the localised state frequency is studied. Polarisation features of the transmission spectrum are investigated. The possibility of experimental implementation of the proposed structure is discussed.     

Experimental investigation of liquid crystals in the millimetre frequency range

Dielectric properties of n·CB (n = 5, 6, 7, 8) liquid crystals (LCs) are investigated in the frequency intervals of 50–80, 120–160 GHz, and at 0.6 THz. The measurements are carried out in the millimetre wave range by the resonance method and with use of a reflectometer designed on the basis of a Michelson interferometer and quasi-optical metal-dielectric waveguides. Of most interest are the room temperature measurements of the birefringence of LCs. These measurements show that LCs can be used as polarisation transformers in the short wavelength region of the millimetre wave band and the long wavelength region of the sub-millimetre wave band.     

Integrated and topological liquid crystal photonics

This contribution is a personal view of the rapidly developing subfield of nematic colloids, with an emphasis on possible applications of these materials in future photonic microdevices. A brief overview of the most important phenomena, observed in the past decade in nematic colloids is given. It is explained why integrated photonics based on microstructured liquid crystals is feasible and future challenges towards the realisation of integrated liquid crystal microphotonics are discussed.     

The structure of acrolein in a liquid crystal phase

The (1)H NMR spectrum of a sample of acrolein dissolved in the nematic liquid crystal phase I52 has been analysed to yield 18 dipolar couplings between all the magnetic nuclei in the molecule; moreover, the (13)C and (13)C{(1)H} NMR spectra of a sample of acrolein in CDCl(3) were recorded and analysed to determine the indirect J(ij) couplings. The data were used to obtain the relative positions of the carbon and hydrogen atoms, assuming that these are independent of the conformations generated by rotation around the C--C bond through an angle phi, and to obtain a probability distribution P(phi). It has been found that in the liquid phase, the distribution is a maximum at the trans form whereas the abundance of the cis form is significantly smaller compared with that found by microwave spectroscopy or high level quantum mechanical calculations. Such calculations produced also a suitable force field needed to develop suitable strategies for vibrational correction procedure in the case of flexible molecules.     

Optical switching property from a laser beam propagating in a polymer dispersed liquid crystal film

Optical switching has been studied in epoxy-based polymer dispersed liquid crystal films. A 'self-transparency' effect is observed due to refractive index variations thermally induced either by heating the sample with a hot stage, or by absorption of the incident laser power. The switching phenomena were studied for different liquid crystal contents in the composites, and experimental evidence of light modulation by a probe beam is also reported. The thermo-optical behaviour of the material is correlated with the morphology of the samples. The results obtained verify the possibility of employing this type of material in optical devices based on the thermo-optical switching effect.     

Effects of functionality of thiol monomer on electro-optical properties of polymer-dispersed liquid crystal films

In this paper, polymer-dispersed liquid crystal (PDLC) films which based on the acrylate and the thiol monomers were first prepared by ultraviolet-initiated polymerisation. The electro-optical properties and morphologies of the PDLC films were systematically investigated. The functionality of thiol monomers and their feed ratio showed great influence on the properties of the fabricated PDLC films because of the existence of competition between thiol–acrylate reaction and acrylate monomer polymerisation reaction. This made the polymer network and electro-optical properties of the PDLC films easily tunable by the introduction of the thiol monomers. When added four-functional thiol monomer PETMP with appropriate concentration into the PDLC system, lower driven voltage and higher contrast ratio were achieved.     

Morphological studies of a (self-assembling oil gelator/liquid crystal) composite system

The aggregation structure of a novel (self-assembling oil gelator/liquid crystal) composite was investigated using light scattering studies and morphological observations. The oil gelator forms a self-assembled-networks aggregate in an organic solvent with a low molecular weight liquid crystal (LC). It became apparent from Hv light scattering patterns and polarizing optical microscopy that two types of LC molecular alignments exist in the composite: a random orientation and a spherulite type one in a nematic gel state. Also, optical and atomic force microscopic observations revealed that fibrils which formed bundles in the fibre-like and spherulite-like aggregates, were formed in the composite. The alignment of the liquid crystal molecules was related to the aggregation structure of the self-assembling oil gelator in a liquid crystal gel state.     

Switchable anti-peeping film for liquid crystal displays from polymer dispersed liquid crystals

Liquid crystals displays (LCDs) currently dominate the display market, wherein a wide viewing angle is considered as one of the most important characteristics. However, for LCDs with wide viewing angles, some private information inevitably becomes more visible; thus, an LCD with a switchable viewing angle has attracted greater interest. Here, we report a novel switchable viewing angle film that can make the viewing angle of an LCD electrically switchable between ±30° and ±60°, i.e. between an anti-peeping mode and a share mode, by 5.0 V is turned on and off, respectively. The response time necessary to change between the modes is in milliseconds. It is believed that it has potential applications in LCDs with high quality.     

Effect of cholesteric liquid crystalline elastomer with binaphthalene crosslinkings on thermal and optical properties of a liquid crystal that show smectic A‐cholesteric phase transition

A side‐chain polysiloxane cholesteric liquid crystalline elastomer (ChLCE) with binaphthalene derivate as crosslinkings and cholesterol derivate as liquid crystalline monomers was designed and synthesized. A binaphthyl chiral dopant (CD) was synthesized as well. The chemical structures and liquid crystalline properties of the ChLCE and the CD were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, element analyses, differential scanning calorimetry and polarizing optical microscopy measurements. The helical twisting power of the ChLCE exhibited a turning point with changing temperature and was smaller than that of the CD. In addition, the effect of the ChLCE on phase transition temperatures and thermal‐optical properties of a liquid crystal that show smectic A (SmA)‐cholesteric (Ch) phase transition was studied. Worthily, the testing of the reflection wavelength with changing temperature suggested that the adding of the ChLCE in liquid crystals that show SmA‐Ch phase transition can expedite their SmA‐Ch transition. In addition, the network structure of the ChLCE may play a significant role in the accelerating of the transition. These properties provided theoretical and experimental foundations for applying ChLCE in thermally sensitive liquid crystal devices requiring fast response, such as thermally controllable windows, materials and displays. Copyright © 2012 John Wiley & Sons, Ltd.     

Dispersion of magnetic nanoparticles in a polymorphic liquid crystal

In order to enhance the phase stability of dispersions of magnetic nanoparticles (NPs) in a polymorphic liquid crystal, new ligands have been designed consisting of a terphenyl-based liquid crystalline core. The most stable dispersions were obtained with 7 nm super-paramagnetic Fe₃O₄ NPs decorated with the new ligands in place of 10 nm ferromagnetic CoFe₂O₄ spherical NPs.     

Supramolecular self-assembly of a novel hydrogen-bonded cholesteric liquid crystal exhibiting macromolecular behaviour

The mesomorphic, thermoptic and glass-forming properties of 4-[6-((cholesteryloxy) carbonyl)oxy hexyloxy] benzoic acid (Ch-BA) have been investigated as a novel supramolecular hydrogen-bonded cholesteric mesogen. Fourier transform infrared and ¹H nuclear magnetic resonance studies have confirmed the chemical structure and the hydrogen-bond formation between the mesogens. According to polarising optical microscope observations, the compound exhibited smectic and chiral nematic phases. Differential scanning calorimetry indicated an unexpected glass transition (T _g) around 32°C and a liquid crystalline region between 32 and 122°C, in which the cholesteric phase appeared at 80°C. As a result of the glass formation, samples of Ch-BA which were rapidly cooled below the T _g were found to preserve the long-range ordering of the liquid crystalline state and retained the iridescent colours of the cholesteric phase. These results led to the conclusion that the formation of identical dimers by intermolecular hydrogen-bonding of the terminal carboxylic acids accompanying the lateral packing of the rigid cores, built a trimeric arrangement and this was responsible for the macromolecular behaviour of Ch-BA, despite its relatively simple structure and low molecular weight.     

Optical studies of dynamic director configurations in ferroelectric liquid crystal devices

An investigation into the transmission spectrum of a ferroelectric liquid crystal device is undertaken. This is done both for an initial static state and during a switching process. Comparisons are made between experimental data and theoretical predictions. The dynamic internal director configurations in the device is shown to be consistent with a simple model during both monopolar and bipolar addressing pulses.