Mesophase formation in lead(II) decanoate

Abstract

Structures of the thermotropic mesophases of lead(II) decanoate are reassigned following optical and X-ray diffraction studies. These results, and those of D.S.C., Raman and ²⁰⁷Pb N.M.R. spectroscopy, indicate formation of a lower temperature mesophase involving mainly increased lateral disorder, and a higher temperature L_α (smectic A) phase resulting from chain disordering and decreased lead-carboxylate interaction. Comparison of experimental thermodynamic data for the phase transitions with theoretical data in the literature indicates that the entropy change for the lower to higher mesophase transition is dominated by the increase in chain disorder.     

Properties of molten carboxylates

Data are presented for the heats of phase changes and specific heats for the even chain length lead(II) carboxylates from hexanoate to octadecanoate. Structures are proposed by analogy to the properties of “fused” aqueous ampiphilic mesophases. Optical examination under a polarising microscope suggests the phase sequence

for the dodecanoate and lower chain length soaps. For tetradecanoate, and above, the V₂ phase is absent and the G phase melts directly to the liquid. The chain length dependence of the entropies of the crystal→G and G→V₂ or G→liquid transitions demonstrates that disordering of the hydrocarbon chain is a stepwise process. The entropy of the V₂→liquid transition is consistent with the melting of a globular solid and may indicate an average micelle size of 4 carboxylate molecules. This leads to a model of the isotropic liquid consistent with the viscosity data previously presented².     

Characterising lone-pair activity of lead(II) by 207Pb solid-state NMR spectroscopy: coordination polymers of [N(CN)2]- and [Au(CN)2]- with terpyridine ancillary ligands

A series of lead(II) coordination polymers containing [N(CN)₂]^? (DCA) or [Au(CN)₂]^? bridging ligands and substituted terpyridine (terpy) ancillary ligands ([Pb(DCA)₂] ( 1 ), [Pb(terpy)(DCA)₂] ( 2 ), [Pb(terpy){Au(CN)₂}₂] ( 3 ), [Pb(4′‐chloro‐terpy){Au(CN)₂}₂] ( 4 ) and [Pb(4′‐bromo‐terpy)(μ‐OH₂)_0.5{Au(CN)₂}₂] ( 5 )) was spectroscopically examined by solid‐state ²⁰⁷Pb MAS NMR spectroscopy in order to characterise the structural and electronic changes associated with lead(II) lone‐pair activity. Two new compounds, 2 and [Pb(4′‐hydroxy‐terpy){Au(CN)₂}₂] ( 6 ), were prepared and structurally characterised. The series displays contrasting coordination environments, bridging ligands with differing basicities and structural and electronic effects that occur with various substitutions on the terpyridine ligand (for the [Au(CN)₂]^? polymers). ²⁰⁷Pb NMR spectra show an increase in both isotropic chemical shift and span (Ω) with increasing ligand basicity (from δ_iso=?3090 ppm and Ω=389 ppm for 1 (the least basic) to δ_iso=?1553 ppm and Ω=2238 ppm for 3 (the most basic)). The trends observed in ²⁰⁷Pb NMR data correlate with the coordination sphere anisotropy through comparison and quantification of the Pb? N bond lengths about the lead centre. Density functional theory calculations confirm that the more basic ligands result in greater p‐orbital character and show a strong correlation to the ²⁰⁷Pb NMR chemical shift parameters. Preliminary trends suggest that ²⁰⁷Pb NMR chemical shift anisotropy relates to the measured birefringence, given the established correlations with structure and lone‐pair activity.     

Evaluation of extraction/digestion techniques used to determine lead isotopic composition in forest soils

Lead isotopic studies in soils provide an efficient tool for tracing the sources of lead pollution. Five different extraction/digestion techniques (0.05 M EDTA, 0.5 M HNO₃, 2 M HNO₃, aqua regia, total digestion) were used for lead isotopic composition (²⁰⁶Pb/²⁰⁷Pb) determination in three forest soil profiles with different kinds of prevailing Pb contamination (unpolluted area, smelting area and vicinity of a motorway). The results obtained showed that all extraction/digestion methods used for the determination of ²⁰⁶Pb/²⁰⁷Pb ratios in surface horizons containing high organic matter contents gave statistically identical values (according to the Tukey test). In mineral soil horizons, differences between the individual extraction/digestion methods could be observed (the lowest ²⁰⁶Pb/²⁰⁷Pb ratios were obtained from EDTA extracts, corresponding to weakly bound anthropogenic lead, and the highest ²⁰⁶Pb/²⁰⁷Pb ratios were obtained from total digestion). The combination of total digestion and EDTA extraction (labile lead fraction) seems to be the optimal combination for ²⁰⁶Pb/²⁰⁷Pb ratio determination and optimal result interpretation.     

A mixed cyclodextrin‐biphenyl thermotropic liquid crystal: Synthesis,liquid‐crystalline properties,and supramolecular organization

A well‐defined structure liquid crystal heptakis [6‐deoxy‐6‐(1‐H‐1,2,3‐triazol‐4‐yl)(methyl)6‐(4‐methoxybiphenyl‐4′‐yloxy) hexanoyl]‐β‐cyclodextrin (H6B‐β‐CD) was synthesized from propargyl 6‐(4‐methoxybiphenyl‐4′‐yloxy) hexanoate (P6B) and heptakis (6‐deoxy‐6‐azido)‐β‐cyclodextrin ((N₃)₇‐β‐CD) by click reaction. The chemical structure of H6B‐β‐CD was confirmed by ¹H NMR, FTIR, and MALDI‐TOF MS. The thermal stability of the compound was investigated by thermogravimetric analysis (TGA). The liquid crystalline behavior was studied by differential scanning calorimetry (DSC), polarizing optical microcopy (POM), and wide‐angle X‐ray diffraction (WAXD) measurement. These investigations have shown that the supramolecular structure of H6B‐β‐CD are consisted of a large scale ordered lamellar structure and a small scale ordered structure (SmE) at low temperature region. As the temperature increases, the small scale structure becomes disordered relatively in the first instance, from smectic E to smectic A. Then, the lamellar structure collapses and nematic phase and isotropic phase are observed in sequence. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2838–2845, 2010     

Synthesis and characterisation of a silicon oxide film solid-phase extraction system for lead traces determination: an all the way green analytical method

In this work, an all the way green analytical procedure based on a silicon oxide film-solid phase extraction system is proposed for lead traces determination. From the synthesis of a solid phase extraction (SPE) system and throughout the metal preconcentration and determination only aqueous media were employed. Characterisation of the film was carried out by Scanning Electron Microscopy and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy. Preconcentration conditions, prior to Pb(II) Electrothermal Atomic Absorption Spectrometry (ETAAS) determination, such as adsorption and desorption time, pH and temperature, were optimised. Langmuir, Freundlich and Dubinin-Radushkevich isotherm models were analysed along with the evaluation of adsorption energy and standard free energy (ΔG ⁰). The greatest adsorption was obtained with incubation at pH 7 and 37°C. By using a small volume of 0.5?mol?L^?1 HNO₃ (0.5?mL) lead was desorbed from the silicon oxide film after 2?h incubation, generating low amount of waste. The films showed better adjustment for the Langmuir model (R^{2 ?}=?0.989). The detection limit (3.29σ) for Pb(II) was 0.228?µg?L^?1. The developed procedure is 10-fold more sensitive in comparison to direct ETAAS determination. Recovery values from soft tap-water and soft well-water were above 95%. When hard water was analysed, Pb(II) adsorption was found to be interfered by Mg²⁺ and Ca²⁺. After five preconcentration cycles relative recovery was found not to decay below 90%, indicating that the silicon oxide film could be used for multiple lead determinations.     

Quantum‐chemical analyses of aromaticity,UV spectra,and NMR chemical shifts in plumbacyclopentadienylidenes stabilized by Lewis bases

We carried out a series of zeroth‐order regular approximation (ZORA)‐density functional theory (DFT) and ZORA‐time‐dependent (TD)‐DFT calculations for molecular geometries, NMR chemical shifts, nucleus‐independent chemical shifts (NICS), and electronic transition energies of plumbacyclopentadienylidenes stabilized by several Lewis bases, (Ph)₂(^tBuMe₂Si)₂C₄PbL₁L₂ (L₁, L₂ = tetrahydrofuran, Pyridine, N‐heterocyclic carbene), and their model molecules. We mainly discussed the Lewis‐base effect on the aromaticity of these complexes. The NICS was used to examine the aromaticity. The NICS values showed that the aromaticity of these complexes increases when the donation from the Lewis bases to Pb becomes large. This trend seems to be reasonable when the 4n‐Huckel rule is applied to the fractional π‐electron number. The calculated ¹³C‐ and ²⁰⁷Pb‐NMR chemical shifts and the calculated UV transition energies reasonably reproduced the experimental trends. We found a specific relationship between the ¹³C‐NMR chemical shifts and the transition energies. As we expected, the relativistic effect was essential to reproduce a trend not only in the ²⁰⁷Pb‐NMR chemical shifts and J[Pb‐C] but also in the ¹³C‐NMR chemical shifts of carbons adjacent to the lead atom. © 2014 Wiley Periodicals, Inc.     

Exo- and endo-Isomers of Plumbylenes Supported by 1,3-Diethers of Calix[4]arene

Calix[4]arene-plumbylene complexes Pb[Calix^t-Bu(O)₂(OR)₂], where R=benzyl, 9-fluorenyl, Si^tBuMe₂, and SiⁱPr₃, have been synthesized by the reaction of Lappert's plumbylene Pb[N(SiMe₃)₂]₂ with the corresponding 1,3-diethers of calix[4]arene. The products have been fully characterized by ¹H, ¹³C{¹H}, and ²⁰⁷Pb NMR spectroscopy, elemental analysis, and X-ray diffraction analysis. The products adopt two different forms depending on the R groups: the alkyl derivatives were obtained as exo-isomers in which the lead atom resides outside the cavity of the calix[4]arene, while the silyl derivatives were isolated as endo-isomers where the lead atom is situated inside the cavity. X-ray diffraction studies revealed that the lead(II) atoms in the exo- and endo-isomers are coordinated by the ethereal oxygen atoms (OR) and the aromatic rings (ArOR), respectively, which are maintained in solution as evidenced by ²⁰⁷Pb NMR studies.     

On the mesomorphism of lanthanum (III) alkanoates

The mesophase behaviour of lanthanum(III) tetradecanoate, La(C₁₃H₂₇COO)₃, (lanthanum myristate) has been studied by polarizing optical microscopy, differential scanning calorimetry and high temperature X-ray diffraction. This metallomesogen forms an ordered lamellar solid which melts to a smectic A mesophase (SmA). Structural details of the different phases are discussed. The higher homologues of the lanthanum(III) soaps were found to have a similar mesophase behaviour.     

Chemical modifications of Pb(Zr<Subscript>0.3</Subscript>,Ti<Subscript>0.7</Subscript>)O<Subscript>3</Subscript> precursor solutions and their influence on the morphological and electrical properties of the resulting thin films

Tetragonal lead zirconate titanate thin films on platinized silicon wafers have been prepared from chemically different precursor solutions by chemical solution deposition. Literature known routes have been evaluated and an optimized standard process has been developed leading to Pb(Zr_0.3,Ti_0.7)O₃ films with a high degree of (111) orientation which consequently shows square hysteris loops with Pr values of 34 μC/cm². Other solvents, different alkoxides of the transition metals, and different carboxylates of lead have been systematically introduced in this standard process and their influence on the final morphological and electrical properties has been studied. It has been found that the use of lead (II) propionate and titanium tetra n-butoxide for solution synthesis leads to a decrease of the remanent polarization of ∼50%. Furthermore the reaction atmosphere after spinning and during the pyrolysis has been investigated. Increased ambient humidity after the spin coating process also caused a significant deterioration of the final film properties. The findings have been explained in terms of a hindered formation of the (111) texture promoting intermediate Pt _x Pb phase.     

Crystal structures,semiempirical PM3 calculations and NMR studies of trimesityllead bromide and dimesityllead dibromide

Trimesityllead bromide has been synthesized by the reaction of mesityllithium with lead(II) chloride in tetrahydrofuran (THF). As a side product, dimesityllead dibromide was formed. The structures of both compounds were determined by single-crystal X-ray diffraction analysis. Both Mes₃PbBr and Mes₂PbBr₂ were characterized by NMR (¹H, ¹³C and ²⁰⁷Pb) and other spectroscopic methods. ²⁰⁷Pb–¹H and ²⁰⁷Pb–¹³C coupling constants were determined. The experimentally obtained X-ray data were compared with those calculated at the semiempirical PM3 level.     

Intramolecular disorder and its relation to mesophase structure in lyotropic liquid crystals

NMR SPDE measurements are reported for the lamellar (dispersions and multibilayer stacks) and hexagonal phases of sodium octanoate/octanol/D₂O mixtures. In the lamellar L_β and L_γ (gel) phases the octyl chains are rigid and perfectly ordered, while in the lamellar L_α and hexagonal phases they are flexible and disordered. In particular, the measurements show that in the fluid lamellar L_α phase, there is a marked discontinuity in the octyl chain flexibility at the C₅-C₆ segment; this behaviour is identical to that previously reported for the alkyl end-chains in smectic 4,4′-di-n-octyloxyazoxybenzene. In contrast, in the hexagonal phase, there is an effectively continuous flexibility gradient along the whole length of the octyl chain as in nematic 4,4′-di-n-octyloxyazoxybenzene. The behaviour in the lamellar phase is attributed to interference between cooperative conformational modes and localized random thermal fluctuations.     

Sequential Voltammetric Determination of Uranium,Cadmium and Lead by Using the ex situ Bismuth Film Electrode: Application to Phosphate Fertilizers

A sequential voltammetric procedure for the determination of uranium, cadmium and lead was investigated at an ex situ bismuth film electrode (BiFE). First, the adsorptive stripping voltammetry was applied to assay the U(VI)‐cupferron complex in the differential pulse mode (detection limit of 1.0 µg L^?1, 200 s accumulation time). Through the manipulation of the same aliquot of the sample, efforts were made to quantify cadmium and lead by square wave anodic stripping voltammetry. Detection limits of 2.03 µg L^?1 for Cd (II) and 2.43 µg L^?1 for Pb (II) were calculated (100 s accumulation time). The methodology was successfully applied to phosphate fertilizer samples after open vessel wet decomposition (HNO₃/H₂O₂). The following value ranges were evaluated: U (VI) 37.2–150 mg kg^?1, Pb (II) 78.3–204 mg kg^?1 and Cd (II) 44.1–71.6 mg kg^?1. Validation was performed by using the standard reference materials SRM‐695 – phosphate fertilizer – and SRM‐1643e – water.     

Fourier transform NMR studies of organometallic compounds. II—synthesis and NMR spectroscopy of propenyl and isopropenyl derivatives of silicon and lead

Isomeric mixtures of compounds Me_nM(CH?CHMe)_4?n (M=Si, Pb; n=0?3) have been prepared and studied, as well as pure Me₃M(CMe?CH₂) and mixtures containing propenyl isopropenyl residues bonded to silicon and lead. ¹H, ¹³C, ²⁹Si and ²⁰⁷Pb NMR data are presented; as previously observed for the corresponding tin compounds, the ²⁹Si and ²⁰⁷Pb shifts for the Me₃MC₃H₅ isomers can be used to calculate the shifts expected for the other isomers; while for lead the agreement is good, calculated and observed values for silicon diverge with decreasing n due, at least in part, to steric factors.     

Syntheses, characterizations and crystal structures of two new lead(II) amino and carboxylate-sulfonates with a layered and a pillared layered structure

Reactions of lead(II) acetate with m-aminobenzenesulfonic acid (HL¹) and 5-sulfoisophthalic acid (H₃L²) afforded two new lead(II) sulfonates, Pb(L¹)₂1 and Pb₂(L²)(μ₃-OH)(H₂O) 2. In compound 1, the lead(II) ion is eight-coordinated by two sulfonate groups bidentately, two sulfonate groups unidentately and two amino groups from six ligands. Each L¹ ligand is tetradentate and bridges with three Pb(II) ions. The interconnection of the Pb(II) ions via bridging sulfonate ligands resulted in 〈100〉 and 〈200〉 layers. In compound 2, one Pb(II) ion is six-coordinated by a carboxylate group bidentately, by two carboxylate groups unidentately, by a sulfonate oxygen atom and by an OH anion, whereas the other one is six-coordinated by a bidentate chelating carboxylate group, two μ₃-OH anions, a sulfonate oxygen atom and an aqua ligand. The interconnection of irregular PbO₆ polyhedra via carboxylate-sulfonate ligands resulted in the formation of a pillared layered structure with the 2D layer being formed; the lead(II) ions, hydroxyl groups, carboxylate and sulfonate groups and the benzene ring as the pillar agent.     

Evaluation of Bismuth Modified Carbon Thread Electrode for Simultaneous and Highly Sensitive Cd (II) and Pb (II) Determination

Bismuth film modified and chemically activated carbon micro‐thread electrodes were investigated for the simultaneous determination of Cd(II) and Pb(II) using square wave anodic stripping voltammetry. The carbon thread electrode was characterised using both surface and electrochemical techniques. Electrochemical impedance spectroscopy (EIS) studies demonstrated that the H₂SO₄/IPA‐treated carbon thread electrode showed a much improved resistance response (R_ct=23 Ω) compared to the IPA‐untreated carbon thread (R_ct=8317 Ω). Furthermore, parameters such as the effect of deposition potential, deposition time and Bi(III) concentration were explored using square wave voltammetry. Detection limits (S/N=3) for Cd(II) and Pb(II) were found to be 1.08 µg L^?1 and 0.87 µg L^?1, respectively and response was found to be linear over the range 5–110 µg L^?1. The proposed Bi/IPA‐treated carbon thread electrode exhibited a high selectivity towards Cd(II) and Pb(II) even in the presence of a range of heavy metals and is capable of repetitive and reproducible measurements, being attributed to the high surface area, geometry and electrode treatment characteristics. The proposed metal ion sensor was employed to determine cadmium and lead in river water samples and % RSD was found to be 5.46 % and 5.93 % for Cd(II) and Pb(II) respectively (n=3). Such facile sensing components favour the development of cost effective portable devices for environmental sample analysis and electrochemical applications.     

Thermotropic mesomorphism of mixed-valent diruthenium aliphatic carboxylates with axial anion bearing two aliphatic chains

A homologous series of binuclear mixed-valent diruthenium tetracarboxylates, Ru₂(O₂C(CH₂)_n?2CH₃)₄DHDP (DHDP = di(hexadecyl)phosphate axial anion, n = 10, 12, 14, 16, and 18), have been synthesized and characterized, and the liquid crystalline properties of these compounds were examined. All the compounds exhibit a room-temperature crystalline lamellar phase and a high temperature (above 140°) Col_h mesophase. Another, probably semi-crystalline, lamellar intermediate phase has also been found for all the studied compounds but for the n = 18 derivative. Comparison with related mesogenic homologous series where the equatorial ligands are also linear carboxylates, but the axial anions bear just one aliphatic chain (carboxylates, octylsulfonate, and dodecylsulfate), shows that the presence of a second aliphatic chain in the axial anion both lowers the transition temperatures and modifies the nature of the intermediate lamellar phase. Structural models at the molecular level are suggested for the crystalline lamellar and the Col_h phases.     

Novel lead(II) carboxylate-arsonate hybrids

Hydrothermal reactions of lead(II) acetate with phenylarsonic acid (H₂L¹) (or 4-hydroxy-3-nitrophenylarsonic acid, H₃L²) and 5-sulfoisophthalic acid monosodium salt (NaH₂SIP) (or 1,3,5-benzenetricarboxylic acid (H₃BTC)) as the second metal linkers afforded three novel mixed-ligand lead(II) carboxylate-arsonates, namely, Pb₅(SIP)₂(L¹)₂(H₂O) 1, Pb₃(SIP)(L²)(H₂O) 2 and Pb(H₂L²)(H₂BTC) 3. The structure of 1 features a complicated 3D network composed of 2D double layers of lead(II) sulfoisophthalate bridged by 1D chains of lead(II) arsonates along b-axis, forming large tunnels along b-axis which are occupied by phenyl rings of the arsonate ligands. In 2, the Pb(II) ions are bridged by {L²}³⁻ anions into a 2D double layer whereas the interconnection of the Pb(II) ions via bridging and chelating SIP anions gave a 2D double layer. The cross-linkage of the above two building units leads to a complicated 3D network. In 3, the interconnection of the Pb(II) ions via bridging {H₂L²}⁻ and {H₂BTC}⁻ anions leads to a 1D double chain down a-axis. These 1D chains are further interconnected via hydrogen bonds among non-coordination carboxylate groups and arsonate oxygens into a 3D supramolecular architecture.     

Some dn Metal Complexes with 4,4'-bipyridine and Trichloroacetates. Preparation,characterization and thermal properties

The new mixed ligand complexes with formulae Co(4-bpy)₂L₂⋅2H₂O (I), Cu(4-bpy)₂L₂⋅H₂O (II) and Cd(4-bpy)L₂⋅H₂O (III) (4-bpy=4,4'-bipyridine, L=CCl₃COO^–) were prepared. Analysis of the IR spectra indicate that 4-bpy is coordinated with metal ions and carboxylates groups bond as bidentate chelating ligands. The electronic spectra are in accordance with pseudo-octahedral environment around the central metal ion in the Co(II) and Cu(II) complexes. The thermal decomposition of the synthesized complexes was studied in air. A coupled TG-MS system was used to analyse the principal volatile thermal decomposition products of Co(II) and Cu(II) complexes. Corresponding metal oxides were identified as a final product of pyrolysis with intermediate formation of metal chlorides. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis,structures and magnetic properties of a series of polynuclear copper(II)‐lanthanide( III) complexes assembled with carboxylate and hydroxide ligands

Heterometallic copper(II)‐lanthanide(III) complexes have been made with a variety of exclusively O‐donor ligands including betaines (zwitterionic carboxylates) and chloroacetate, which are dinuclear CuLn, tetranuclear Cu₂Ln₂, pentanuclear C_u3Ln₂, and octadecanuclear C_u12 complexes. The results show that subtle changes in both the carboxylates and acidity of the reaction solution can cause drastic changes in the structures of the products. Magnetic studies exhibit that shielding of the Ln³⁺ 4f electrons by the outer shell electrons is very effective to preclude significant coupling interaction between the Ln³⁺ 4f electrons and Cu²⁺ 3d electrons in either a mono‐atomic hydroxide‐bridged, or a carboxylate‐bridged system.