Liquid crystal alignment property of n‐alkylthiomethyl‐ or n‐alkylsulfonylmethyl‐substituted polystyrenes

We synthesized a series of n‐alkylthiomethyl‐substituted polystyrenes (#T‐PS, # = 4, 8, 12, and 16) and n‐alkylsulfonylmethyl‐substituted polystyrenes (#S‐PS, # = 4, 8, 12, and 16), where # is the number of carbon atoms in the n‐alkyl side group of the polymers, using polymer analogous reactions to investigate their liquid crystal (LC) alignment properties. In general, the LC cell fabricated using the polymer film having a longer n‐alkyl side group, a thioether linkage group, and a higher molar content of n‐alkyl side group showed homeotropic LC alignment behavior with a pretilt angle of about 90°. The homeotropic alignment behavior was well correlated with the surface energy of the polymer films; when the positive dielectric anisotropic LC (ZLI‐5900‐000 from Merck) and negative dielectric anisotropic LC (MLC‐7026‐000 from Merck) were used to fabricate the LC cells, homeotropic alignment was observed when the surface energy values of the polymer were smaller than about 25 and 32 mJ/m², respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Liquid crystal alignment properties of n-alkylsulphonylmethyl-substituted polyoxyethylenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of n-alkylsulphonylmethyl-substituted polyoxyethylenes (#S-PEO, #?=?4, 6, 7, 8 and 10), where # is the number of carbon atoms in the n-alkyl side groups having different n-alkyl chain length, were investigated as a function of the rubbing density. The LC cells made from unrubbed #S-PEO (# ≥8) films having more than eight carbon atoms in the n-alkyl side groups showed homeotropic LC alignment. The homeotropic LC alignment behaviour correlated well with the surface energy values of the unrubbed #S-PEO films; homeotropic LC alignment was observed when the surface energy values of the unrubbed #S-PEO films were smaller than about 21.62 mJ m^?2. The LC cells made from rubbed #S-PEO (# ≥7) films having more than seven carbon atoms with a rubbing density of 150 showed homeotropic LC alignment. It was also found that the tilt angle of the LCs on the rubbed #S-PEO films was affected not only by the n-alkyl chain length of the polymers, but also by the rubbing density, regardless of the surface energy value of the #S-PEO film.     

Vertical alignment of liquid crystal on tocopherol-substituted polystyrene films

We synthesised a series of vitamin-based and renewable tocopherol-substituted polystyrene (PTOC#, # = 20, 40, 60, 80 and 100), where # is the molar content of tocopherol moiety, using polymer analogous reactions to investigate their liquid crystal (LC) alignment properties. In general, the LC cell fabricated using the polymer film having a higher molar content of tocopherol side group showed vertical LC alignment behaviour. The vertical alignment (VA) behaviour was well correlated with the surface energy value of these polymer films. For example, VA was observed when the surface energy values of the polymer were smaller than about 35.22 mJ/m² generated by the nonpolar tocopherol moiety having long and bulky carbon groups. Good electro-optical characteristics, such as voltage holding ratio and residual DC voltage, and aligning stabilities at 200°C and ultraviolet irradiation of 10 J/cm² were observed for the LC cells fabricated using PTOC100 as a LC alignment layer. Therefore, it was first found that the renewable tocopherol-based materials can produce an eco-friendly vertical LC alignment system.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Synthesis and properties of photoalignable aromatic polyesters containing phenylenediacrylate units in their backbones and n‐alkyl moieties in their side groups

A series of poly[oxy(4‐n‐alkyl‐3,5‐benzoate)oxy‐1,4‐phenylenediacryloyl]s (PPDA‐CnBZ polymers) with high molecular weights was synthesized. These polymers exhibit excellent solubility in some common organic solvents and produce good quality films using conventional spin‐casting and drying processes. The polymers are thermally stable up to 357–362 °C in a nitrogen atmosphere; their glass transition temperatures are greater than 121 °C. The photoreactions and photoalignments of the polymers were investigated using ultraviolet‐visible and infrared spectroscopy, and their liquid crystal (LC) alignment properties were examined. The phenylenediacrylate (PDA) chromophores in the polyesters were found to mainly undergo photocyclization upon ultraviolet light irradiation. Irradiation of the polyester films with linearly polarized ultraviolet light (LPUVL) induces preferential orientation of the polymer main chains, while the unreacted PDA chromophores are aligned along the direction perpendicular to the electric vector of the LPUVL. All the films irradiated with LPUVL were found to align LCs in a direction perpendicular to the electric vector of the LPUVL. Moreover, these LC alignments persisted even on irradiated films annealed at temperatures up to 210 °C, which is much higher than the glass transition temperatures of the polyesters. These LC alignment characteristics are due to the anisotropic interactions of the LC molecules with the oriented polymer chains and with the unreacted PDA chromophores. LC alignments on the polyester film surfaces have homeotropic to homogeneous characteristics, depending on the length of the n‐alkyl side group, providing strong evidence that the n‐alkyl side groups of the polyesters play a critical role in determining the pretilt angles of the LCs. The LC pretilt angles were also found to be influenced by the thermal annealing history of the irradiated films. In summary, the excellent properties of the PPDA‐CnBZ polymers make them promising candidate materials for use as LC alignment layers in advanced LC display devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1322–1334, 2004     

Liquid crystal alignment behaviours on poly(methyl methacrylate) having polyhedral oligomeric silsesquioxane groups

A series of poly(methyl methacrylate) derivatives containing polyhedral oligomeric silsesquioxane (POSS) groups (MCP#) were synthesised via free radical polymerisation (FRP) using methacryl isobutyl POSS (MA-POSS) and methyl methacrylate as monomers to investigate liquid crystal (LC) alignment property of these polymer films. The LC cells made from the films of the polymers having 100 mol% of MA-POSS units (MCP100) showed vertical LC alignment having a pretilt angle of about 90°. The vertical LC alignment behaviour on the MCP100 film was ascribed to the very hydrophobic MCP100 surface having the surface energy value smaller than about 23 mJ/m² generated by the nonpolar bulky POSS group. Good electro-optical characteristics, such as voltage holding ratio (VHR) and residual DC voltage (R-DC), were observed for the LC cells fabricated using MCP100 as a LC alignment layer.     

Liquid crystal alignment and pretilt angle generation on a photopolymer layer based on N-(phenyl)maleimide

A photopolymer based on N-(phenyl)maleimide was synthesized and the liquid crystal (LC) alignment effects of the photopolymer layer on homeotropic alignment were studied. Good LC alignment with UV exposure of PMI5CA (N-(phenyl)maleimide with a 5-carbon chain cinnamoyl group) was obtained. However, defective LC alignment was observed for PMI3CA (N-(phenyl)maleimide with a 3-carbon chain cinnamoyl group) and PMIF (N-(phenyl)maleimide including a fluoro-cinnamoyl group). Good LC alignment with UV exposure on the PMI5CA surface was observed with annealing temperature up to 150°C. It seems that the LC aligning ability of the photopolymer layers based on N-(phenyl)maleimide depends on the side chain length of the photopolymer.     

Polar and azimuthal alignment of a nematic liquid crystal by alkylsilane self-assembled monolayers: effects of chain-length and mechanical rubbing

Alkylsilane self-assembled monolayers (SAMs) on oxide substrates are commonly used as liquid crystal (LC) alignment layers. We have studied the effects of alkyl chain length, photolytic degradation, and mechanical rubbing on polar and azimuthal LC anchoring. Both gradient surfaces (fabricated using photolytic degradation of C18 SAMs) and unirradiated SAMs composed of short alkyl chains show abrupt transitions from homeotropic to tilted alignment as a function of degradation or chain length. In both cases, the transition from homeotropic to tilted anchoring corresponds to increasing wettability of the SAM surfaces. However, there is an offset in the critical contact angle for the transition on gradient vs unirradiated SAMs, suggesting that layer thickness is more relevant than wettability for LC alignment. Mechanical rubbing can induce azimuthal alignment along the rubbing direction for alignment layers sufficiently near the homeotropic-to-planar transition. Notably, mechanical rubbing causes a small but significant shift in the homeotropic-to-tilted transition, e.g., unrubbed C5 SAMs induce homeotropic anchoring, but the same surface after rubbing induces LC pretilt.     

Patterned alignment of nematic liquid crystals generated by inkjet printing of gold nanoparticles and emissive carbon dots on both flexible polymer and rigid glass substrates

Patterned homeotropic alignment using nanoparticles (NPs) was achieved using inkjet printing. Two types of gold NPs, one smaller and one larger in core diameter (2 and 5 nm) capped with a monolayer of dodecanethiol, and emissive carbon dots with a core diameter of 2.5 nm featuring a mixed ligand shell of carboxylic acid groups and aliphatic hydrocarbon chains were tested on both rigid glass and flexible polycarbonate substrates. To define the director across the entire cell and not just in the NP-printed areas, alignment ‘underlayers’ were tested, and 30° obliquely evaporated SiO_x as alignment ‘underlayer’ generally provided the best results with the highest quality of the homeotropic alignment as well as the best contrast at the boundary between printed and non-printed (i.e. homeotropic and planar) domains of the fabricated cells. We also report that the chemical nature of the nematic liquid crystal (LC) used, the number of layers printed and the composition of the nano-ink need to be adjusted to obtain pattern alignment devices that positively benefit from both the properties of the LC and the nanomaterial printed.     

Unusual electro-optical behaviour of the nematic polyacrylate

ABSTRACT

High sensitivity of liquid crystals to the electric field makes them highly demanded and widely used in different applications. Despite the large number of the electro-optical research on the low-molar-mass liquid crystals electro-optics of the liquid crystalline (LC) polymers is much less studied. Herein, the comparative electro-optical behaviour of two nematic comb-shaped polyacrylates with phenylbenzoate mesogenic side groups was studied in detail. These two polyacrylates have completely the same structure of polymer backbone and spacer length but different in the direction of the ester group in the phenylbenzoate fragments. It was found that this difference predetermines their completely opposite electro-optical properties.

The influence of the electric field of different strength and frequency on the orientation of the mesogenic groups of these polymers is studied. It is shown that application of the electric field at temperatures above the glass transition temperature (~25°C) induces reorientation of the mesogenic groups along or perpendicular to the electric field direction depending in its turn on the ester group direction. For one of the polyacrylates an unusual textural transition is found; during cooling of the polymer sample under applied field at definite temperature a sharp change in the mesogen’s orientation from homeotropic to planar one is found. This electro-optical phenomenon is observed for the first time and probably associated with sharp change in sign of anisotropy of dielectric permittivity from positive (at high temperatures) to negative one (at lower temperatures). Kinetics of the electro-optical switching at different temperatures, influence of the molar masses of the polymer and frequency of the applied AC field on electro-optical behaviour of the polymers are studied. The possibility of the fixation of the electroinduced homeotropic alignment of the mesogenic groups by photopolymerisation of the diacrylate dissolved in the polymer is demonstrated.     

Polymer-dispersed liquid crystal composites for bio-applications: thermotropic,surface and optical properties

Polymer-dispersed liquid crystal (PDLC) systems based on polysulfone as carrying matrix and 4-cyano-4?-pentylbiphenyl (5CB) liquid crystal (LC) were obtained as thin transparent films. The PDLC films were prepared by solvent- and thermally induced phase separation methods, with various compositions in the two components. Information on the phase separation was obtained by polarised light optical microscopy, differential scanning calorimetry and scanning electron microscopy. The PDLC composites show well-defined droplets of submicrometric size, around 650 nm for a medium content of LC and around 250 nm for a low one. The droplets show a radial configuration and a homeotropic alignment of the LC molecules within. By contact angle measurement and surface free energy calculations, it was established that self-assembling of aliphatic units of the two composite components, at droplet interface, is the driving force of the homeotropic alignment. Moreover, these data indicated the potential biocompatibility of the studied composites. The photophysical behaviour shows a better light emission of the PDLCs containing bigger droplets.     

Ordered nanostructures at two different length scales mediated by temperature: A triphenylene‐containing mesogen‐jacketed liquid crystalline polymer with a long spacer

A mesogen‐jacketed liquid crystalline polymer (MJLCP) containing triphenylene (Tp) moieties in the side chains with 12 methylene units as spacers (denoted as PP12V) was synthesized. Its liquid crystalline (LC) phase behavior was studied with a combination of solution ¹H NMR, solid‐state NMR, gel permeation chromatography, thermogravimetric analysis, polarized light microscopy, differential scanning calorimetry, and one‐ and two‐dimensional wide‐angle X‐ray diffraction. By simply varying the temperature, two ordered nanostructures at sub‐10‐nm length scales originating from two LC building blocks were obtained in one polymer. The low‐temperature phase of the polymer is a hexagonal columnar phase (Φ_H, a = 2.06 nm) self‐organized by Tp discotic mesogens. The high‐temperature phase is a nematic columnar phase with a larger dimension (a′ = 4.07 nm) developed by the rod‐like supramolecular mesogen—the MJLCP chain as a whole. A re‐entrant isotropic phase is found in the medium temperature range. Partially homeotropic alignment of the polymer can be achieved when treated with an electric field, with the polymer in the Φ_H phase developed by the Tp moieties. The incorporation of Tp moieties through relatively long spacers (12 methylene units) disrupts the ordered packing of the MJLCP at low temperatures, which is the first case for main‐chain/side‐chain combined LC polymers with MJLCPs as the main‐chain LC building block to the best of our knowledge. The relationship of the molecular structure and the novel phase behavior of PP12V has implications in the design of LC polymers containing nanobuilding blocks toward constructing ordered nanostructures at different length scales. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 295–304     

Director configurations in nematic droplets with tilted surface anchoring

The polymer dispersed nematic liquid crystal (LC) with the tilted surface anchoring has been studied. The droplet orientational structures with two point surface defects – boojums and the surface ring defect – are formed within the films. The director tilt angle α = 40° ± 4° at the droplet interface and LC surface anchoring strength W_s ~ 10^–6 (J m^?2) have been estimated. The bipolar axes within the studied droplets of oblate ellipsoidal form can be randomly oriented are oriented randomly relatively to the ellipsoid axes as opposed to the droplets with homeotropic and tangential anchoring.     

Excess enthalpy and excess volume for binary systems of two ionic liquids + water

In this work we report the experimental measurements of excess molar enthalpy and excess molar volume, at 298.15 K and atmospheric pressure, on ethylammonium nitrate (EAN) and propylammonium nitrate (PAN) + water mixtures. Positive enthalpies were found for the two systems (maximum, at x ₁ around 0.37 correspond to about 700 and 900 J mol⁻¹ for EAN and PAN respectively). As the hydrophobic/hydrophilic ratio increases, along with the length of the alkyl chain in the ionic liquids, ILs, the specific interactions IL-water become less important. The excess molar volumes, V ^E, are negative over the entire composition range for the two binary mixtures. They have similar values but curves exhibit a different asymmetric shape and around equimolar composition they intersect each other. This behaviour: positive H ^E and negative V ^E, is not very common.     

Control of liquid crystal pretilt angles by chemical derivatization reaction of polyvinyl alcohol films

A chemical derivatization technique was used to control the pretilt angle of a liquid crystal. A polyvinyl alcohol (PVA) alignment layer, which gives a very low pretilt angle when in contact with the liquid crystal (LC), was reacted with trifluoroacetic anhydride (TFAA) in the gas phase to change polar –OH groups to –OCOCF₃ groups. By introduction of the –OCOCF₃ groups in to the PVA, we obtained homeotropic alignment of the E7 LC molecules. The homeotropic alignment of E7 LC molecules in contact with the derivatized PVA alignment layer was confirmed by FTIR and microscopy with crossed polarizers. The change of liquid crystal molecules from homogeneous to homeotropic alignment may be caused by the decrease in surface tension of the PVA alignment layer, due to substitution of the polar –OH groups by –OCOCF₃ groups in the gas phase derivatization reaction.     

Response time mechanism for a photo-aligned vertical-alignment liquid crystal display on a homeotropic alignment layer

The electro-optical characteristics of the photo-aligned vertical-alignment liquid crystal display (VA-LCD) with a non-polarized UV exposure of 45° on homeotropic polyimide (PI) surface was investigated. The domain size of the photo-aligned VA-LCD increases proportionately with the UV exposure time. The LC alignment of the photo-aligned VA-LCD is attributed to photo-dissociation of the polymer by UV exposure on the homeotropic PI surface. Good voltage-transmittance characteristics of the photo-aligned VA-LCD without negative compensation film was measured. The response time of the photo-aligned VA-LCD was slow compared with a rubbing-aligned VA-LCD; this is considered to be due to the alignment of LC molecules.     

Response time mechanism for a photo-aligned vertical-alignment liquid crystal display on a homeotropic alignment layer

The electro-optical characteristics of the photo-aligned vertical-alignment liquid crystal display (VA-LCD) with a non-polarized UV exposure of 45° on homeotropic polyimide (PI) surface was investigated. The domain size of the photo-aligned VA-LCD increases proportionately with the UV exposure time. The LC alignment of the photo-aligned VA-LCD is attributed to photo-dissociation of the polymer by UV exposure on the homeotropic PI surface. Good voltage-transmittance characteristics of the photo-aligned VA-LCD without negative compensation film was measured. The response time of the photo-aligned VA-LCD was slow compared with a rubbing-aligned VA-LCD; this is considered to be due to the alignment of LC molecules.     

Ionic Complexes of Biotechnological Polyacids with Cationic Surfactants

Summary: Stoichiometric complexes of biotechnological poly(γ-glutamic) acid and poly(β,L -malic) acid with alkyltrimethylammonium surfactants of long alkyl chains could be readily prepared in aqueous medium. They adopt a biphasic layered structures in which the main chain and the side chain alternate with nanometric periodicity. Alkyl side chains show reversible melting that involves generation of mesophases. Complexes degraded by water by different mechanisms depending on the constitution of the main chain; the polymalic complexes underwent surface erosion whereas the polyglutamic ones degraded in bulk. Erythromycin could be homogenously loaded into the paraffinic subphase of the complexes and delivered upon incubation under physiological conditions in parallel to the hydrolysis of the polymer.     

Single molecule spectroscopy of conjugated polymer chains in an electric field-aligned liquid crystal

Using single molecule polarization spectroscopy, we investigated the alignment of a polymer solute with respect to the liquid crystal (LC) director in an LC device while applying an external electric field. The polymer solute is poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (or MEH-PPV), and the LC solvent is 5CB. The electric field induces a change in the LC director orientation from a planar alignment (no electric field) to a perpendicular (homeotropic) alignment with an applied field of 5.5 x 103 V/cm. We find that the polymer chains align with the LC director in both planar and homeotropic alignment when measured in the bulk of the LC solution away from the device interface. Single molecule polarization distributions measured as a function of distance from the LC device interface reveal a continuous change of the MEH-PPV alignment from planar to homeotropic. The observed polarization distributions are modeled using a conventional elastic model that predicts the depth profile of the LC director orientation for the applied electric field. The excellent agreement between experiment and simulations shows that the alignment of MEH-PPV follows the LC director throughout the LC sample. Furthermore, our results suggest that conjugated polymers such as MEH-PPV can be used as sensitive local probes to explore complex (and unknown) structures in anisotropic media.     

Langmuir–Blodgett films of stearic acid deposited on substrates at different orientations relative to compression direction: alignment layer for nematic liquid crystal

The Langmuir monolayer at an air–water interface shows remarkably different surface pressure (π)–area (A) isotherm, when measured with the surface normal of a Wilhelmy plate parallel or perpendicular to the direction of compression of the monolayer. Such difference arises due to difference in stress exerted by the monolayer on the plate in different direction. In this article, we report the effect of changing the direction of substrate normal with respect to the compression of the monolayer during Langmuir–Blodgett (LB) film deposition on the morphology of the films. The morphology of the LB film of stearic acid is studied using an atomic force microscope. The morphology of the LB films is found to be different due to difference in the stress in different directions. The role of such surface morphology on the alignment of a nematic liquid crystal (LC) in LC cells is studied. The granular texture of LB films of stearic acid supports the homogeneous alignment of the LC whereas the uniform texture supports the homeotropic alignment of the LC.