Model liquid crystalline dimers in a slit pore: Monte Carlo simulation study

ABSTRACT

In this work, we present results from (isobaric–isothermal) Monte Carlo Simulation studies of liquid crystalline dimer systems confined in a slit pore. Liquid crystalline dimer systems of various spacer numbers have been considered. Surface-induced conformational and alignment properties of these systems at different pressures under homeotropic anchoring condition have been investigated. We have used easily manageable coarse grained force fields to model both monomer–monomer and monomer–substrate interaction potentials. According to the simulated result, the anchoring of dimers to the surface and orientation of mesogenic units with respect to the surface normal seem to depend on the spacer number for messogen attractive confinement. Dimers with lower spacer number are able be adsorbed to the surface and most of their mesogens are oriented along the surface normal even at lower pressure. Those with larger spacer number are distributed throughout the volume at lower pressure. In the case of mesogen repulsive confinement, most of the dimers are adsorbed to the surface and most mesogens are randomly oriented at low pressure. As the pressure gets higher, the adsorption and orientability increase depending on the type of confinement and spacer number. As a result, clear submolecular partitioning and smectic A like structure have been identified.     

Dielectric relaxation study of a H shaped liquid crystal dimer

The present article reports dielectric relaxation study of an unusual shaped liquid crystal dimer (H shape) in the temperature range 40–85°C. The study of this liquid crystal dimer is important due to the presence of azo central linkage, which is photosensitive. The dielectric relaxation study indicates coupling between the electric field and the liquid crystal molecule of H shaped dimer. Various dielectric properties for this liquid crystal dimer are quite different from the conventional liquid crystals. The dielectric relaxation observed in the smectic phase is due to the reorientation of molecule along the director in the presence of an applied electric field. The temperature dependence of the dielectric parameters, such as relaxation frequency, relaxation strength and distribution parameter have been evaluated for this liquid crystal dimer for both planar as well as homeotropically aligned cell and then compared. The Cole–Cole equation has been used to evaluate the aforementioned parameters.     

Non-symmetric liquid crystal dimers based on 1,3,4-oxadiazole derivatives: synthesis,photoluminescence and liquid crystal behaviour

A series of non-symmetric liquid crystal compounds consisting of two different semi-rigid anisometric cores, namely 1,3,4-oxidiazole and biphenyl units, and two short terminal groups, have been synthesised in good yield. It has been shown by polarising optical microscopy and differential scanning calorimetry that all these compounds display liquid crystalline behaviour, with nematic and/or smectic A mesophases. The nature of the mesophases is dependent on the electronic properties of the terminal groups. In methylene chloride solution all the compounds displayed a room temperature emission with λ_max at 358–396 nm and quantum yields of 0.29–0.56. The effect of the terminal groups on the mesomorphic and photoluminescent properties is briefly discussed in the context of their electronic characteristics.     

Studies on thermotropic liquid crystalline polyurethanes. II. Synthesis and properties of liquid crystalline polyurethane elastomers

Three series of novel thermotropic liquid crystalline polyurethane elastomers (TLCPUEs) were studied. Hard segments were formed by using hexamethylene diisocyanate (HDI) reacted with a mesogenic unit, benzene-1,4-di(4-iminophenoxy-n-hexanol), which also acted as a chain extender. Three diols: 1,10-decanediol,poly(oxytetramethylene) glycol (PTMEG) M _n = 1000 and PTMEG M _n = 2000 were used as the soft segments. The effects of soft segments of polyurethanes on the liquid crystalline behavior were studied. Higher molecular weight TLCPUEs were obtained by adding 30?50 mol % of mesogenic segments to diisocyanates. In contrast to a conventional chain extender such as 1,2-ethylene glycol or 1,4-butyl glycol, the synthesized polyurethane elastomers exhibited a mesophase transition by using a mesogenic unit as the chain extender. Mesophase was found for all synthesized LC polyurethanes except of polymers H2-A-12 and H2-A-7. The structures and the thermal properties of all synthesized TLCPUEs were studied by using FTIR spectroscopy, wide-angle x-ray diffraction (WAXD) and DSC measurements, a polarizing microscope equipped with a heating stage, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). Mechanical properties were also examined by using a tensilemeter. © 1995 John Wiley & Sons, Inc.     

New symmetric azobenzene molecules of varied central cores: Synthesis and characterisation for liquid crystalline properties

A new series of azobenezene liquid crystals (LCs) was designed and synthesised by known and straightforward methods. The central connecting cores of the molecules varied viz., benzene/naphthalene/biphenyl. The molecular structures were confirmed by infrared, UV, nuclear magnetic resonance spectroscopic techniques. The LC texture and thermal phase behaviours were investigated by polarising optical microscopy and differential scanning calorimetry. Smectic B phase was found in biphenyl-derived azobenzene ester. The effect of central core on LC properties was investigated. The decreased angle at central connecting core suppressed the melting points, phase transition temperatures without losing LC properties, whereas, in moderate angle compounds LC properties were suppressed. The compounds with increased angle at central core favours rich mesomorphism.     

The influence of structural changes of symmetrical dimers containing two phenyl groups on liquid crystalline behaviour

Some symmetrical dimeric compounds containing biphenyl, biphenylcarboxylic acid or benzoiloxyphenyl moieties and polymethylene spacers were synthesised. The mesogenic properties of the synthesised compounds were investigated by optical microscopy, calorimetric and X-ray methods. It was shown that the location and direction of the ester bonds has a crucial significance in mesophase formation.     

The first examples of discotic liquid crystalline gemini surfactants

Six novel gemini imidazolium salts tethered with hexaalkoxytriphenylene moieties were prepared by quaternization of imidazole nitrogen with ω-bromo-substituted triphenylene derivatives. Their chemical structures were examined by ¹H NMR, IR, UV, MS, and elemental analyses. The mesomorphic properties of these discotic dimeric salts were investigated by polarizing optical microscopy, differential scanning calorimetry, and X-ray diffraction studies. These triphenylene-imidazole-based gemini dimers with bromide as counter ion were found to exhibit liquid crystalline behavior over a wide temperature range and display ionic conductivity in the range of 10⁻⁶ to 10⁻⁵ S/m. These materials tend to form monolayer at the air-water interface.     

Synthesis and comparison of mesomorphic behaviour of a cholesterol-based liquid crystal dimer and analogous monomers

Oligo/polymerisation of known mesogens constitutes a highly efficient strategy in liquid crystal research due to its potential to generate novel liquid crystal materials with intriguing mesomorphic properties. Here we report the synthesis and comparative studies of a synthetic liquid crystal dimer and two of its monomer analogues. By incorporating cholesterol as the mesogenic group, we designed a flexible scaffold consisting of a hybrid of non-polar hydrophobic chain and polar tetraethylene glycol appended to the cholesteryl mesogens. Detailed studies showed that the two classes of mesogens exhibit the same type of liquid crystal phases with similar dimensions but their transition temperatures varied which can be effectively rationalised by the particular chemical functionalities present in each class of materials.     

Studies on the thermotropic liquid crystalline polycarbonates. II. Synthesis and properties of fully aromatic liquid crystalline polycarbonates

Four series of fully aromatic polycarbonates were prepared by using melt polycondensation from various novel phenylene diphenyl dicarbonates: 1,4-phenylenc diphenyl dicarbonate, 1,3-phenylene diphenyl dicarbonate, methyl-1,4-phenylene diphenyl dicarbonate, and chloro-1,4-phenylene diphenyl dicarbonate with various diols—4,4′-biphenyl diol, hydroquinone, 2,7-naphthalene diol and 1,5-naphthalene diol, respectively. The thermotropic liquid crystalline properties of synthesized polycarbonates were investigated by: (1) examination of the melt birefringence and stir opalescence by a polarizing microscope equipped with a heating stage, (2) characterization by a differential scanning calorimeter (DSC), and (3) analysis of the wide angle x-ray diffraction. It was found that the 1,3-phenylene unit is compensated for the nonlinearity of the carbonate group, and polycarbonates which contain this bent shape unit showed excellent wide mesophase transition in this study. © 1993 John Wiley & Sons, Inc.     

官能化苯并菲盘状液晶的合成及不饱柔链对介晶性的影响

合成了12个含不饱和软链的苯并菲盘状液晶化合物,C18H6（OC5H11）6-x（OR）x（x=1,2,3）,R=-C3H6CH=CH2（a）,-C3H6C≡CH（b）,-C2H4OCH=CH2（c）.化合物结构通过核磁共振氢谱和高分辨质谱表征.化合物热致液晶性通过偏光显微镜（POM）,差视扫描热量法（DSC）,和X射线衍射（XRD）进行了研究.结果显示目标化合物呈现有序的六方柱状介晶相.端炔基链化合物b系列熔点最高.乙烯氧基柔链化合物c系列有最高的清亮点和最宽的介晶性温度范围,且随着不饱和醚链数的增多,清亮点明显升高.对称苯并菲化合物sym-C18H6（OC5H11）3（OR）3比不对称化合物asym-C18H6（OC5H11）3（OR）3具有更高的熔点和清亮点.乙烯氧基柔链可极化的偶极相互作用对液晶稳定性有较大贡献.     

Studies on thermotropic liquid crystalline polymers. XV. Synthesis and properties of liquid crystalline copoly(imide-ester)s

Three series of the thermotropic liquid crystalline copoly(imide-ester)s were prepared by direct polycondensation. The first two series of the copoly(imide-ester)s were synthesized from N-(4-carboxyphenyl) trimellitimide with N,N-di(hydroxypropyl) pyromellitic diimide and various aromatic diols. The third series of copoly(imide-ester)s were prepared by N-(4-carboxyphenyl) trimellitimide with various imide-diols (methylene spacer = 2–6) and phenyl hydroquinone. The structures and thermal properties of the synthesized poly(imide-ester)s were examined by FTIR spectrum, wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal optical polarized microscope, and thermogravimetric analysis (TGA). The effects of the structures of the aromatic diols on the thermal properties of the resulting copoly(imide-ester)s were investigated. It was found that most of the copoly(imide-ester)s possessed excellent mesophase stabilities and thermostabilities. The mesophase stabilities of poly(imide-ester)s decreased with the increase of the size of lateral group, and the mesophase range increased with the increase of the amount of PhHQ. No significant odd-even effects were observed between the methylene spacer lengths and transition temperatures. © 1996 John Wiley & Sons, Inc.     

1,2-Propanediol-linked chiral symmetric and non-symmetric liquid crystal dimers containing trifluoromethyl

Four symmetric and non-symmetric chiral liquid crystal dimers containing trifluoromethyl groups, termed as TFBA-PD-TFBA, UEBBA-PD-TFBA, UEBA-PD-TFBA and UEA-PD-TFBA, respectively, have been synthesised and characterised. UEA-PD-TFBA exhibited chiral nematic phase, whereas the other three dimers displayed chiral smectic A phase. X-ray diffraction (XRD) has revealed the structure of the smectic A phase for TFBA-PD-TFBA to be intercalated, whereas that for UEBBA-PD-TFBA and UEBA-PD-TFBA to be monolayer and interdigitated, respectively. In addition, the weaker peak corresponding to a shorter layer spacing was observed for UEBBA-PD-TFBA and UEBA-PD-TFBA. Considering the results of XRD measurements and computer simulations, the structural model corresponding to the shorter layer spacing is assigned as horseshoe-like shape. The absence of smectic behaviour for UEA-PD-TFBA reveals that the weaker aromatic–aromatic interactions cannot stabilise the smectic A phase.     

The influence of structural changes of the N-substituent on liquid crystalline behaviour of ester imides

Several new ester imide derivatives with different N-substituents in the imide ring were synthesized and their mesogenic properties investigated by thermal analysis, optical microscopy and X-ray diffraction. All the esters of N-4-[(4'-decyloxybiphenyl-4-yl)oxycarbonyl]phthalimideacetic acid and aliphatic alcohols exhibited monolayer SmA and SmC phases. In addition, for the ethyl and propyl esters a monotropic hexatic (F or I) phase was observed. The introduction of additional substituents at the carbon atom in the methylenemethoxycarbonyl group (in the vicinity of the nitrogen atom) substantially influenced liquid crystalline properties: the compounds with a flexible chain exhibited monotropic SmA-SmB dimorphism, but liquid crystalline properties vanished for the substituent containing the more rigid phenyl ring.     

Non‐symmetric liquid crystal dimers containing the 4‐nitrobenzohydrazide group: synthesis and mesomorphic behaviour

The synthesis and mesomorphic behaviour are reported of a new series of dimers containing 4‐nitrobenzohydrazide and azobenzene groups as the mesogenic units. These non‐symmetric liquid crystal dimers are found to exhibit a monolayer smectic A phase (SmA₁). Lateral hydrogen bonding and strong dipole–dipole interactions are shown to be the major driving forces for the formation of the SmA₁ phase. The present study indicates that the intermolecular interactions and thus the mesophase morphology of the liquid crystal dimers can be controlled by the appropriate selection of the molecular fragments capable of forming H‐bonds.     

Mesomorphic phase transition behaviour of photopolymerisable liquid crystalline triphenylene ether compounds

This report discusses the preparation and the unusual mesomorphism of three homologues of photopolymerisable triphenylene ether compounds. These homologues showed ‘a cold crystallisation’ on heating differential scanning calorimetry curves, and this phenomenon is attenuated with increase methylene units, spacers between the triphenylene core and the terminal photopolymerisable acrylate group. Classical textures of hexagonal columnar (Col_h) mesophase were observed by polarising optical microscopy for all three photopolymerisable mesophase compounds described here. Also described is the mesomorphism of their intermediates, hydroxylalkoxytriphenylenes. In some cases, the discotic columnar hexagonal mesophases were confirmed by wide angle X-ray scattering techniques.     

Pair potential of liquid metallic Be from electron theory compared and contrasted with recent ab initio work on the free-space beryllium dimer

Two decades ago, Perrot and March [F. Perrot and N.H. March, Phys. Rev. A. 41, 4521 (1990)] used electron theory to derive an oscillatory pair potential between the beryllium nuclei in liquid metal beryllium. They predict a first minimum at 2.1?Å, followed by a larger repulsive hump at 2.8?Å. Here, we compare and contrast this result for liquid beryllium with the recent ab initio work by Koput and the present quantum Monte Carlo (QMC) calculation on the beryllium dimer in free space. Koput situates the minimum in the potential curve for the free-space dimer at 2.4?Å and it is quite similar in depth to that for liquid metallic beryllium. Our QMC curve is similar, with the minimum at 2.33?Å. They are tabulated in this letter.     

Synthesis and properties of reactive liquid crystal monomers and side-chain liquid crystalline polymers

Two nematic liquid crystal (LC) monomers containing double bonds in the side chain were designed and synthesised. Length of the side groups varied from 1 to 2 methylene units. The side-chain polymers were synthesised by hydrosilylation reaction. The molecular structures of the intermediates and the LC monomers were characterised by Fourier transform infrared, elemental analysis and nuclear magnetic resonance spectroscopy. The thermal phase behaviour of the monomers and polymers were investigated by differential scanning calorimetry and polar optical microscopy coupled with hot stage. The LC monomers showed only one nematic mesophase in the cooling process. And, the two polymers exhibit an enantiotroppic nematic mesophase either in the heating or in the cooling process.     

Studies on thermotropic liquid crystalline polymers. XIV. Synthesis and properties of liquid crystalline poly(imide-ester)s by the direct polycondensation

A series of semi-aromatic poly(imide-ester)s were prepared by the direct polycondensation of N-(4-carboxyphenyl) trimellitimide or N-(3-carboxyphenyl) trimellitimide with various pyromellitic diimide diols containing methylene spacer = 2–6, respectively. The effect of the amount of LiCl, pyridine, and the kinds of condensation agents on the direct polycondensation were studied. The structures and thermal properties of the synthesized poly(imide-ester)s were examined by FTIR spectrum, wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal optical polarized microscopic observation, and thermogravimetric analysis (TGA). It is found that P1 series [derived from N-(4-carboxyphenyl) trimellitimide] with even number methylene spacer (n = 4, 6) exhibit smectic mesophase, but P2 series [derived from N-(3-carboxyphenyl) trimellitimide] do not show LC phase. © 1996 John Wiley & Sons, Inc.