Cyclocholates as Chiral Selectors for Capillary Gas Chromatography – Effect of Temperature Conditioning on the Chromatographic Behavior of the Stationary Phase

The suitability of cyclocholates as chiral selectors in gas chromatography has been evaluated. We present the synthesis and characterization of two cyclocholates, viz. 3α,7α-diacetoxycyclo[3]cholate and 3α,7α-diacetoxycylo[4]cholate. Mixtures of these new selectors with polysiloxanes were tested as chiral stationary phases in capillary gas chromatography. Several enantiomer separations of common racemates were achieved with the 3α,7α-diacetoxycyclo[3]cholate at 10% in OV-1701 (w/w). It was shown that column efficiency was strongly dependent on temperature and that enantioselectivity was very sensitive to column conditioning. This chromatographic behavior suggested that cyclocholates were only dispersed in polysiloxane. Thus, it was assumed that chiral discrimination occurred via enantioselective adsorption interactions of enantiomers at the surface of the solid chiral selector dispersed in the polysiloxane matrix OV-1701.     

A novel pillar[3]trianglimine macrocycle with a deep cavity used as a chiral selector to prepare a chiral stationary phase by thiol-ene click reaction for enantioseparation in high-performance liquid chromatography

A chiral pillar[3]trianglimine (C₆₀H₇₂N₆O₆) with a deep cavity has been developed as a chiral selector and bonded to thiolated silica by thiol-ene click reaction to fabricate a novel chiral stationary phase for enantioseparation in high-performance liquid chromatography. The enantioseparation performance of the fabricated chiral stationary phase has been evaluated by separating various racemic compounds, including alcohols, esters, amines, ketones, amino acids, and epoxides, in both normal-phase and reversed-phase elution modes. In total, 14 and 17 racemates have been effectively separated in these two separation modes, respectively. In comparison with two widely used chiral columns (Chiralcel OD-H and Chiralpak AD-H), our novel chiral stationary phase offered good chiral separation complementarity, separating some of the tested racemates that could not be separated or were only partially separated on these two commercial columns. The influences of analyte mass, mobile phase composition, and column temperature on chiral separation have been investigated. Good repeatability, stability, and column-to-column reproducibility of the chiral stationary phase for enantioseparation have been observed. After the fabricated column had been eluted up to 400 times, the relative standard deviations (n = 5) of resolution (Rs) and retention time of the separated analytes were < 0.39% and < 0.20%, respectively. The relative standard deviations (n = 3) of Rs and retention time for column-to-column reproducibility were < 4.6% and < 5.2%, respectively. This study demonstrated that the new chiral stationary phase has great prospects for chiral separation in high-performance liquid chromatography.     

Methods of studies on quantitative structure–activity relationships for chiral compounds

Chiral compounds are very important in drug development, organic synthesis, materials science, toxicology, or environmental chemistry. Therefore, for creating new drugs, several methods have been suggested in recent years. In several laboratories in the world, some new methods for the derivations of the parameters were constructed and used for studies on quantitative structure–activity/property relationships of chiral molecules. The algorithms reviewed in this paper involve Zargeb group chiral indices, chiral molecular connectivity index, chiral topological charge index, chiral A_m index, chiral indices based on the matrixes, chiral indices based on chiral product, conformation‐independent chirality code, conformation‐dependent chirality code, quantitative two‐dimensional chirality degrees of benzenoids, and so on. Copyright © 2012 John Wiley & Sons, Ltd.     

Enantiomeric Recognition of d- and l-Amino Acid Methyl Ester Hydrochlorides by New Chiral Bis-pyridino-18-crown-6 Substituted with Urea, and Diphenyl Groups

The article reports the synthesis and chiral recognition properties of a new chiral bis-pyridino-18-crown-6 (7), having urea, diphenyl, and allyloxy groups. The chiral bis-pyridino-18-crown-6 was prepared by a thirteen-steps procedure from the commercially available (S)-(+)-mandelic acid and chelidamic acid. The association constants (K _a) (1.33 × 10³–3.20 × 10³) for enantiomeric recognition of d- and l-amino acid methyl ester hydrochlorides using the chiral bis-pyridino-18-crown-6 have been examined by ¹H-NMR titration method in CDCl₃ at 25 °C. The chiral bis-pyridino-18-crown-6 showed higher association constants for the d-series amino acid methyl ester (d-AlaOMe, d-LeuOMe, d-MetOMe) hydrochlorides as compared to the corresponding l-series (l-AlaOMe, l-LeuOMe, l-MetOMe) hydrochlorides.     

Greatly Enhanced Fluorescence by Increasing the Structural Rigidity of an Imine: Enantioselective Recognition of 1,2‐Cyclohexanediamine by a Chiral Aldehyde

An aldehyde that is not fluorescent responsive toward a chiral diamine has been converted to a sensitive fluorescence enhancement sensor through incorporation of an additional hydrogen bonding unit to increase the structural rigidity of the reaction product of the aldehyde with the diamine. This new chiral aldehyde is synthesized in one step from the reaction of (S)‐3‐formylBINOL with salicyl chloride. When treated with trans‐1,2‐cyclohexanediamine in ethanol, it shows greatly enhanced fluorescence at λ=410 nm with good enantioselectivity. NMR and mass spectroscopic methods are used to investigate the reaction of the chiral aldehyde with the diamine. This study has revealed a two‐stage reaction mechanism including a fast imine formation and a slow ester cleavage.     

A Chiral Recognition Mechanism Proposed for Resolving π-Acidic Racemates on π-Acidic Chiral Stationary Phases Derived from (S)-Leucine

A chiral recognition mechanism which can rationalize the resolution of N-(3,5-dinitrobenzoyl)-α-amino amides on chiral stationary phases (CSPs) obtained from N-(3,5-dinitrobenzoyl)leucine amide derivatives has been proposed on the basis of the chromatographic resolution behavior of various N-(3,5-dinitrobenzoyl)-α-amino acid derivatives and N-(various benzoyl)leucine N-propyl amides. The proposed chiral recognition mechanism utilizes two hydrogen bonding interactions between the CSP and the analyte and a π-π donor-acceptor interaction between the N-(3,5-dinitrobenzoyl) groups of the CSP and the analyte. From the chiral recognition mechanism proposed, it has been concluded that the resolution of π-acidic N-(3,5-dinitrobenzoyl)-α-amino acid derivatives on π-acidic CSPs derived from N-(3,5-dinitrobenzoyl)leucine amide delivatives is not unusual, but is merely the extension of the resolution of the π-basic racemates on π-acidic CSPs. However, the chromatographic behavior of the resolution of N-(3,5-dinitrobenzoyl)phenylglycine derivatives on CSPs derived from N-(3,5-dinitrobenzoyl)leucine amide derivatives is different from that of the resolution of other N-(3,5-dinitrobenzoyl)-α-amino acid derivatives. To rationalize this exceptional behavior, a second chiral recognition mechanism which utilizes two hydrogen bonding interactions (which are different from those of the first chiral recognition mechanism) between the CSP and the analytes and a π-π donor-acceptor interaction between the N-(3,5-dinitrobenzoyl) group of the CSP and the phenyl group of the analytes has been proposed to compete with the first chiral recognition mechanism. In this instance, it has been proposed that the separation factors and the elution orders of the resolution of N-(3,5-dinitrobenzoyl)phenylglycine derivatives are dependent on the balance of the two competing chiral recognition mechanisms.     

The effects of the nature of catalyst and of the solvent on the stereoselectivity in amine-catalyzed asymmetric synthesis of substituted cyclohexa-1,3-dienes from prenal and monoesters of ylidenemalonic acids

In the amine-catalyzed reactions of prenal with (Z)-5-methyl-2-(methoxycarbonyl)hexa-2,4-dienoic or (Z)-3-phenyl-2-(ethoxycarbonyl)prop-2-enoic acid chiral β-amino alcohols provide for higher enantiomeric purity of the resulting alkyl 4-methyl-6-(2-methylprop-1-enyl)-and 4-methyl-6-phenylcyclohexa-1,3-dienoates than that provided by related chiral amines without hydroxy group. The values ofee attained in nonpolar solvents are higher than those observed in the polar ones. Substituting stoichiometric amounts of a chiral 1-amino-3-methylbuta-1,3-diene for a combination of prenal with 0.1 equiv. of the corresponding chiral amine results in the products of much lower enantiomeric purity. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 84–92, January, 1998.     

An efficient chiral synthesis of (R)-N-[3-acetyl-4-(2-hydroxy-3-isopropylamino-propoxy)phenyl]-butanamide with high enantioselectivity

R-Enantiomer of the β-receptor antagonist N-[3-acetyl-4-(2-hydroxy-3-isopropylamino-propoxy)phenyl] butanamide with high enantioselectivity was synthesized from cheap starting materials and enantiopure chiral reagent through an efficient, convenient and practical synthetic strategy. Title product was detected by ¹H NMR, ¹³C NMR, and MS, and the enatiomeric excess was determined by chiral HPLC analysis using a chiracel AD-H column. Supported by the National Natural Science Foundation of China (Grant Nos. 20472090 & 10576034) and PLA General Armament Department (Grant No. 9140A28010707zk7301)     

Enantiomeric Discrimination by Surface‐Enhanced Raman Scattering–Chiral Anisotropy of Chiral Nanostructured Gold Films

A surface‐enhanced Raman scattering‐chiral anisotropy (SERS‐ChA) effect is reported that combines chiral discrimination and surface Raman scattering enhancement on chiral nanostructured Au films (CNAFs) equipped in the normal Raman scattering Spectrometer. The CNAFs provided remarkably higher enhancement factors of Raman scattering (EFs) for particular enantiomers, and the SERS intensity was proportional to the enantiomeric excesses (ee) values. Except for molecules with mesomeric species, all of the tested enantiomers exhibited high SERS‐ChA asymmetry factors (g), ranging between 1.34 and 1.99 regardless of polarities, sizes, chromophores, concentrations and ee. The effect might be attributed to selective resonance coupling between the induced electric and magnetic dipoles associated with enantiomers and chiral plasmonic modes of CNAFs.     

An Efficient Method for Catalytic Asymmetric Reduction of Diketones and Application of Synthesis to Chiral 2,5- Diphenylpyrrolidine and 2,5-Diphenylthiolane

Asymmetric reduction of diketones with borane reagents generated in situ using cheap and available NaBH_4 andSnCl_2 in the presence of(S)-(-)-α,α-diphenyl-2-pyrrolidinemethanol was successfully achieved to yield the corre-sponding chiral diols with excellent stereoselectivity and enantioselectivity.And the chiral diol was transformedinto optically pure C_2-symmetricl chiral amine or thioether.     

Extraction of Phenylalanine Enantiomers by Aqueous Two Phase Systems Containing Combinatorial Chiral Selector

In order to obtain a better enantioselectivity of phenylalanine enantiomers and establish the optimal chiral extraction conditions, the distribution behavior was investigated in aqueous two‐phase systems which were composed of polyethylene glycol and ammonium sulfate containing combinatorial chiral selector: β‐cyclodextrin and HP‐β‐cyclodextrin. The influence of the molar concentration ratio of combinatorial chiral selectors, the total molar concentration of combinatorial chiral selectors, pH value, buffer type and its concentration were thoroughly studied, respectively. The results show that the enantioselectivity reaches 1.53 under the optimal chiral extraction conditions. This extraction is a potential economical and effective way for chiral resolution.     

Design,Preparation and Application of a New π‐Basic Chiral Stationary Phase for the Liquid Chromatographic Separation of Enantiomers

A new reciprocal π‐basic chiral stationary phase (CSP) was designed based on the reciprocity conception of chiral recognition and prepared starting from (S)‐leucine. The CSP thus prepared was applied in resolving various π‐acidic N‐(3,5‐dinitrobenzoyl)‐α‐amino amides and esters and found to be very effective. Especially, N‐(3,5‐dinitrobenzoyl)‐α‐amino N,N‐dialkyl amides were resolved very well on the new reciprocal CSP. From the chromatographic resolution results and based on the reciprocity conception of chiral recognition with the aid of Corey/Pauling/Koltan (CPK) molecular model studies, a chiral recognition mechanism which utilizes π‐π interaction and simultaneously two hydrogen bonding interactions between the CSP and the analyte has been proposed. The CSP prepared in this study was also successful in resolving 3,5‐dinitrophenylcarbamate derivatives of 2‐hydroxycarboxylic acid esters.     

Enantiomeric Discrimination by Surface-Enhanced Raman Scattering–Chiral Anisotropy of Chiral Nanostructured Gold Films

A surface-enhanced Raman scattering-chiral anisotropy (SERS-ChA) effect is reported that combines chiral discrimination and surface Raman scattering enhancement on chiral nanostructured Au films (CNAFs) equipped in the normal Raman scattering Spectrometer. The CNAFs provided remarkably higher enhancement factors of Raman scattering (EFs) for particular enantiomers, and the SERS intensity was proportional to the enantiomeric excesses (ee) values. Except for molecules with mesomeric species, all of the tested enantiomers exhibited high SERS-ChA asymmetry factors (g), ranging between 1.34 and 1.99 regardless of polarities, sizes, chromophores, concentrations and ee. The effect might be attributed to selective resonance coupling between the induced electric and magnetic dipoles associated with enantiomers and chiral plasmonic modes of CNAFs.     

以不同的环内酰胺为手性辅助剂的烯酰基环内酰胺的立体选择环氧化反应

Asymmetric epoxidation of N-enoylsultams （1, 3-15） incorporating a variety of chiral sultams as the chiral induction elements with UHP/TFAA has been studied. Both diastereomeric isomers of epoxides （2, 16-28） were obtained in high yield and moderate to high optical purity.     

Molecular-level chiral discrimination and induction

The review describes the mechanism of chiral discrimination of racemic amines upon crystallization and the induction of chirality in organic reactions by using them as chiral auxiliaries. In order to form conglomerates, which can be resolved into the two enantiomers upon alternative seeding, both formation and packing of 2₁-columns are essentially very important. On the other hand, in order to achieve high efficiency in resolution through diastereomeric salt formation, which is the most practical method, one of a pair of diastereomeric salts derived from a racemic amine and an enantiomerically pure resolving agent should at least have two 2₁-columns and planar boundary surfaces in its crystal structure. On the basis of this knowledge, we developed several artificial chiral auxiliaries such as erythro-2-amino-1,2-diphenylethanol,cis-2-amino-1-acenaphthenol, andcis-2-amino-3,3-dimethyl-1-indanol. These were found to be very efficient chiral auxiliaries in asymmetric inductions: alkylation of chiral imines, catalytic borane-reduction, and alkylation of chiral N-acylated oxazolidinone.     

Cholesteric induction power of β-galactose derivatives

Galactose derivatives were explored as chiral dopants, effective for inducing chiral nematic liquid crystal (LC) phases. Galactose bearing O-isopropylidene substituents at the C3 and C4 and butoxybiphenyl substituents at the C2 and C6 positions exhibits a high helical twisting power (HTP) value of ?74.4 μm^?1. Such a high HTP value for the galactose derivative is attributed to (1) linkage of the C3 and C4 carbons with the O-isopropylidene substituent, which places the C2 and C6 substitutes in a skew arrangement at a large angle and (2) enhancement of the affinity with the host nematic LCs by incorporating aromatic substituents at the C2 and C6 positions that are similar to those in the host.     

Studies on the synthesis and properties of ferroelectric side chain liquid crystalline polyoxetanes

Two series of novel ferroelectric liquid crystalline (FLC) monomers were derived from 3-(hydroxymethyl)-3-methyloxetane, used as the backbone unit, and 2-(S)-[2-(S)-methylbutoxy]propionic acid, as a chiral moiety. The corresponding polyoxetanes were prepared by ring-opening polymerization using BF₃ · OEt₂ as an initiator. In addition to the structure identification, their liquid crystal phase behavior and electrical properties are also studied. Before their connection to the chiral molecular moiety, two series of carboxylic acids, 4-(6-[(3-methyloxetan-3-yl)methoxy]alkoxy)-benzoic acids and 4,4′-[6-(3-methyloxetan-3-yl)alkoxy]biphenylcarboxylic acids, show the phase sequence K Sc I and K Sc N I, respectively. After connection, the phase behavior of the corresponding chiral monomers is changed from K Sc I to K Sc* N* I as well as from K Sc N I to K Sc* Sa I. Only the phase sequence K Sc* Sa I is observed in both series of polyoxetanes. All of the synthesized monomers exhibited enantiotropic chiral smectic C(Sc*) phase. The monomers, with the biphenyl unit linked directly with a chiral center, possessed higher spontaneous polarization (P_s) values. Polyoxetanes possess a wide temperature range for the liquid crystal phase, about 120°C, and the Sc* phase range can be up to 95°C. However, the position of the biphenyl unit will not affect the spontaneous polarization of the synthesized side chain FLC polyoxetanes. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2843–2855, 1997     

Single-Layered Chiral Nanosheets with Dual Chiral Void Spaces for Highly Efficient Enantiomer Absorption

Although considerable effort in recent years has been devoted to the development of two-dimensional nanostructures, single-layered chiral sheet structures with a lateral assembly of discrete clusters remain elusive. Here, we report single-layered chiral 2D sheet structures with dual chiral void spaces in which discrete clusters of planar aromatic segments are arranged with in-plane AB order in aqueous methanol solution. The chirality of the sheet is induced by the slipped-cofacial stacks of rectangular plate-like aromatic segments in the discrete clusters which are arranged laterally with up and down packing, resulting in dual chiral void spaces. The chiral nanosheets function as superfast enantiomer separation nanomaterials, which rapidly absorb a single enantiomer from a racemic mixture with greater than 99 % ee.     

From Sergeants and Soldiers to Chiral Conflict Effects in Helical Polymers by Acting on the Conformational Composition of the Comonomers

Different communication mechanisms can be switched within a copolymer by acting on the conformational composition of the components and their chirality. Thus, a sergeant and soldiers effect is produced in two diastereomeric copolymer series, poly[(S)- 1 _r-co-(S)- 2 _(1−r)] and poly[(R)- 1 _r-co-(S)- 2 _(1−r)], owing to the presence in chloroform of a preferred conformation in (S)- 2 , and a conformational equilibrium in 1 , where a P helix is induced independently of the absolute configuration of the soldier. In THF, the presence of a conformational equilibrium at the pendants of the two components produces a reciprocal chiral enhancement effect by copolymerization of the two monomers, while in DMF, a third chiral to chiral communication switch is produced due to the presence of a single conformer at the pendant group of the two components. In such a case, a chiral conflict or chiral accord effect is produced depending if the two components induce the same or the opposite helical sense.     

Preparation of the enantiopure 1,2-diamine monomer and its polymerization: The efficient polymeric chiral ligand of an asymmetric hydrogenation catalyst

An enantiopure 1,2-diamine monomer possessing a p-vinylbenzyl group as a polymerizable group was synthesized from chiral 1,2-bis(p-hydroxyphenyl)-N,N′-bis(tert-butoxycarbonyl)-1,2-diaminoethane. The chiral monomer was copolymerized with styrene, and this was followed by the deprotection of the tert-butoxycarbonyl group, which yielded the polymer-supported chiral 1,2-diamine. The polymeric catalyst system was established with the polymeric chiral 1,2-diamine complexed with 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl/RuCl₂. In the presence of potassium tert-butoxide (t-BuOK), the polymeric catalyst system worked well in the asymmetric hydrogenation of aromatic ketones. The corresponding chiral secondary alcohols were obtained in quantitative yields with a high level of enantioselectivity. The insolubility of the catalyst, caused by the crosslinked structure of the polymer, made it recyclable. The polymeric catalyst was reused several times without a loss of catalytic activity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4556–4562, 2004