The influence of terminal chlorine on the mesomorphic properties of new thiobenzoates containing two and three benzene rings

New liquid crystalline chloro-substituted thioesters containing two and three benzene rings have been synthesized. 4-Chlorophenyl 4-n-alkoxythiobenzoates and 4-chlorophenyl 4-n-alkoxybenzoyloxy-4'-thiobenzoates are referred to as nO.SCl and nO.OSCl, respectively, where n varies from 4 to 16 for nO.SCl, from 4 to 10 for nO.OSCl and denotes the number of carbon atoms in the alkyl chain. Their mesomorphic properties were investigated by means of polarizing optical microscopy, differential scanning calorimetry, transmittance light intensity and X-ray diffraction measurements. The nO.SCl homologous series possesses smectic A (SmA) and nematic (N) phases for n = 4, 5, 6 while higher homologues have only an enantiotropic SmA phase. Those from the nO.OSCl homologous series have enantiotropic N and SmA phases and higher transition temperatures. The range of the N phase decreases, and of the SmA increases, with the elongation of the alkoxy chain in the nO.OSCl homologous series. The effect on mesomorphic behaviour of terminal alkoxy chain lengthening and replacement by chlorine on the other side of the molecule is discussed.     

Synthesis and mesomorphic properties of some new chiral thiobenzoates containing three rings

Six new compounds with chiral terminal chains and three rings bridged via the -COS- and -COO- groups have been synthesized. Three of them belong to series A and have two benzene rings and one bicyclo[2,2,2]octane, while the remaining three come from series B, where all three are benzene rings. Series A compounds share a characteristic feature of two smectic phases: SmA* and SmB*, whereas mesogens from the B series exhibit only the one SmA* phase.     

A convenient synthesis and the mesomorphic properties of new chiral ferroelectric thiobenzoates

A secondary chiral (R)-(?)-2-alcohol underwent the Mitsunobu reaction with triphenylphosphine, diethyl azodicarboxylate and ethyl 4-hydroxybiphenylcarboxylate, resulting in the desired (S)-(+)-product with high enantiomeric purity (>99% ee), with the chiral branched chain attached to the biphenyl. This method is operationally simple and provides the very important chiral precursor in good yields (62% in dry THF and 72% in dry Et₂O). The condensation of the (S)-(+)-acid chloride from this material and a suitable 4-n-alkylthiophenol in toluene in the presence of pyridine or triethylamine furnishes the chiral (S)-(+)-thiobenzoate liquid crystals in good yields (80–83% in pyridine and 65–68% in Et₃N). (S)-(+)-4-(1-Methylheptyloxy)biphenyl 4-alkylthiobenzoates are abbreviated (S)-MHOBSn , where n varies from 4 to 10 and denotes the number of carbon atoms in the alkyl chain. DSC, polarizing microscopy and X-ray diffraction showed that the (S)-MHOBSn series possesses a rich phase polymorphism: two highly ordered tilted phases CrG* and SmI*, as well as the ferroelectric smectic C (SmC*) and chiral nematic (N*) phase. In this series, the seldom observed transition between the chiral phases SmI*–SmC* is seen. All the compounds possess stable enantiotropic SmC* and N* phases. The existence of weak intermolecular hydrogen-bonding in (S)-MHOBSn was confirmed by FTIR spectroscopy.     

Homogeneously aligned liquid crystal molecules on unidirectional buckle pattern of polyurethane films

We present the fabrication of an anisotropic structure on a polyurethane (PU) film for aligning liquid crystal (LC) molecules with ion beam (IB) irradiation at an incident angle. The obtained anisotropic structure assembles the LC cells in a layer that aligns LC molecules uniformly. Polarised optical microscopy images of an LC cell fabricated with IB-irradiated PU were captured to confirm the LC alignment state and compared with those fabricated with non-treated PU. To analyse the effects of the IB irradiation, X-ray photoelectron spectroscopy and field-emission scanning electron microscopy were used to investigate the chemical and morphological modifications, respectively. IB irradiation modifies the chemical structure of PU, which indicates that a new skin layer is formed on the PU films. This skin layer generates an in-plane compressive strain, thereby creating buckles on the PU films. Simultaneously, the physical collision of the reactive Ar⁺ ions during IB irradiation induces a directional strain on the surface, thereby forming a unidirectional structure of buckles along the direction of IB irradiation. The PU film annealed at 200°C showed the high average transmittance of 88.9%, which is appropriate as an alignment layer.     

The influence of methoxy side groups and halogen nature on the mesomorphic and optical properties of symmetrical azomethines

The preparation, characterisation, thermotropic and optical properties of low-molecular azomethines with or without methoxy side group are described in this paper. The azomethine compounds were synthesised by condensation reaction of o-dianisidine/benzidine with para-halogen substituted benzaldehyde. Their properties were analysed by differential scanning calorimetry, thermogravimetry analysis, polarised optical microscopy, X-ray diffraction and optical spectroscopy. The azomethines present liquid crystalline behaviour with large mesophase range and high thermal stability. The compounds without lateral methoxy groups showed smectic A phase, while those with methoxy groups exhibited only nematic phase. The effect of methoxy group and different terminal substituents on the mesomorphic behaviour, molecular and optical properties was estimated in terms of parameters such as molecular polarisability, dipole moment, interdigitation parameter and axial ratio.     

Mesomorphic properties of 5boSOMH from new three rings thiobenzoate series

Phase polymorphism of a novel chiral liquid crystalline compound (S)-(+)-4-{4-(4-n-pentylbicyclo[2,2,2]octancarbonylthio)benzoyloxy}benzoate 1-methylheptyl (in short: 5boSOMH) was examined with three complementary methods: Differential Scanning Calorimetry (DSC), Polarized Light Optical Microscopy (POM) and Transmitted Light Intensity (TLI). X-Ray diffraction was used to learn about molecular arrangement in ordered phases. 5boSOMH has two enantiotropic phases: SmB* and SmA*, and exhibits solid phase polymorphism.     

Synthesis of new benzobisthiazole materials and a study of their mesomorphic and luminescence properties

Novel tetra- and hexacatenar materials based on benzobisthiazole derivatives have been synthesised (4a–c, 5a–c and 6a–c) and their mesomorphic properties have been studied by differential scanning calorimetry, polarised optical microscopy and X-ray diffraction. All compounds in series 4a–c display an enantiotropic hexagonal columnar phase, whereas their analogous compounds in series 5a–c did not show mesomorphic behaviour. Compound 6a displays an unidentified monotropic columnar phase, whereas compounds 6b and 6c show an enantiotropic rectangular columnar mesophase. The mesomorphic properties were found to be dependent on the length, position and number of alkoxy chains attached at the end of the rigid core. These compounds also show photoluminescence properties in the visible region and have good quantum yields. A thermogravimetric analysis was also performed.     

Effect of alkyl chain length in the terminal ester group on mesomorphic properties of new chiral lactic acid derivatives

Two series of new liquid crystalline lactic acid derivatives with a terminal ester group have been synthesised. The effect of this ester unit and the length of its alkyl chain on the mesomorphic and dielectric properties of the compounds exhibiting a broad temperature range of chiral smectic phases have been studied. We found that the mesomorphic behaviour and phase transition temperatures are strongly affected by the molecular architecture. Depending on the alkyl chain length in the terminal ester unit, the studied materials exhibited paraelectric smectic A*, ferroelectric tilted smectic C* and antiferroelectric smectic C_A* phases over a broad temperature range. The physical properties of the compounds have been studied by optical polarising microscopy, differential scanning calorimetry, electro-optic measurements, small-angle X-ray scattering and dielectric spectroscopy. Furthermore, the homologues with short terminal alkyl chains showed a very small layer shrinkage at the transition from the orthogonal SmA* to the tilted SmC* phase, which is a characteristic feature of ‘de Vries-type’ behaviour.     

Liquid crystal properties of new ionic liquid crystal compounds having a 1,3-dioxane ring

New pyridinium type chiral ionic liquid crystal materials having a 1,3-dioxane ring in the central core, (+)- N -2-methylbutyl-4-(5-alkyl-1,3-dioxan-2-yl)pyridinium bromides (6), were synthesized. Mixture A was made by adding 5.9 wt % of compound 6?3 to the ferroelectric liquid crystal mixture Merck 4655-100; its phase transitions and some liquid crystal properties were measured. In spite of a large decrease of P_s for mixture A, its response time A was the same as that of Merck 4655-100. The dielectric constants perpendicular to the molecular axis for the smectic C* and smectic A phases were measured for the mixture and Merck 4655?100: in the smectic C phase, these dielectric constants were almost the same (4.5～5.5), but in the smectic A phase, the perpendicular dielectric constant of the mixture was 47.0 and that of Merck 4655?100 was 4.5.     

The influence of heteroaromatic rings on mesomorphic properties I. A new series of pyridazine- and pyridine-carboxylates

We have prepared new esters of 6-alkyloxypyridazine-3-carboxylic acid and the 6-alkyloxypyridine-3-carboxylic acid. The introduction of the heteroaromatic rings leads to significant changes in mesomorphic behaviour. The compounds exhibit a strong tendency to form smectic C phases.     

Effect of terminal aryl rings of liquid crystal trimers on liquid crystalline properties

Liquid crystalline properties of five series of biphenyl derivatives connected with p-nitrophenyl, phenyl, 2-naphthyl, 9-phenathryl and bromo as the terminal groups via flexible spacers were studied. All the compounds exhibited nematic phase. The nematic–isotropic or isotropic–nematic transition properties resulted in an odd–even effect as the length of the spacers was varied, in which the even members exhibited higher values, for the compounds with p-nitrophenyl, phenyl, 2-naphthyl and 9-phenanthryl groups, while the transitional properties of the compounds substituted with bromo atom as the terminal group instead of the aryl groups did not show such odd–even effect. These results suggest that the aryl rings, such as p-nitrophenyl, phenyl, 2-naphthyl and 9-phenanthryl groups, play a role of mesogen while the terminal bromo atom does not. The effect of the terminal aryl rings on the liquid crystalline properties will be reported.     

Preparation,spectral and thermal properties of new Isoflavone derivatives: mesomorphic properties and DFT studies

The four new homologous series of symmetric Isoflavon dimers were synthesised using varied alkyl/aryl diamines in linear sense. The chemical structures of the molecules were characterised by IR, NMR and CHNS analysis. Further, Liquid crystalline properties were verified using the combination of differential scanning calorimetry (DSC) and polarised optical microscope (POM). The molecular systems studied here reveal that LC property depends on the length of the middle connecting diamine spacer along with terminal alkyl spacer. The lower members favour to exhibit smectic A phase, whereas higher members exhibit nematic mesophase. The nature of LC property behaviours is supported by molecular geometries studied by DFT calculations.     

Liquid crystal alignment on a ZrO2 thin film as a function of ion beam incident angle

Nematic liquid crystal alignment capabilities and electro-optical performance characteristics have first been embodied in a ZrO₂ layer using ion-beam irradiation. The study demonstrates that liquid crystal layers can be aligned homogeneously as a function of the incident angle of the ion beam device, which causes a uniform dense plasma. X-ray photoelectron spectroscopy indicated that full oxidation of the ZrO₂ thin-film surfaces was produced by ion irradiation, shifting the Zr 3d spectra to lower binding energies. In addition, the electro-optical performance characteristics of twisted nematic cells on a ZrO₂ thin-film layer after ion beam irradiation showed similar characteristics to those of a rubbed polyimide cell.     

Synthesis and mesomorphic properties and optical behaviour analysis of homologous series azobenzene liquid crystal monomer with polar substituents

ABSTRACT

Twenty novel azobenzene liquid crystal micromolecular compounds named ω-[4-(p-substituted azobenzeneoxy carbonyl]acid (X-ABCnA) have been designed and synthesised, followed by studies on the thermal performance and mesomorphic properties of the compounds. The liquid crystal compounds were divided into five homologous series based on the terminal substituents R (R = CH₃O, CH₃, H, Cl, NO₂). In each series, the number of carbons on flexible chain was 4, 6, 8 and 10, respectively. Fourier-transform infrared, proton nuclear magnetic resonance and elementary analysis demonstrated that the structure of the synthesised azobenzene liquid crystal compounds was consistent with the molecular design. The mesomorphic properties were tested, analysed and characterised by using differential scanning calorimetry and polarised optical microscopy. The melting transition (T _m) of all the compounds in homologous series with different substituents appeared to decrease with the increase of carbon numbers on flexible chains. The same held true for the temperature of isotropic-mesophase/crystalline transition. The compounds with stronger polarity of terminal substituents were more likely to form broader mesogenic ranges. The liquid crystal compounds discussed in this work can be regarded as a reference for the synthesis of mesogenic arms participating in the synthesis of novel multi-arm liquid crystalline macromolecules and polymers.     

The influence of flexible spacer and the chirality of the core on the formation of chiral nematic phase of symmetric dimers containing trifluoromethyl terminal

Seven symmetric liquid crystal (LC) dimers containing different chiral cores and LC arms have been synthesised, termed EPDA-(R,S)PD, TFBDA-(R,S)PD, TFBA-(R,S)PD, TFBDA-(R)PD, TFBA-(R)PD, TFBDA-IB and TFBA-IB, respectively. TFBDA-(R,S)PD, TFBA-(R,S)PD, TFBDA-(R)PD and TFBDA-IB displayed chiral smectic A (SmA*) phase, while EPDA-(R,S)PD, TFBA-(R)PD and TFBA-IB exhibited chiral nematic (N*) phase. The effects of flexible spacer, structural type of LC arms and the chirality of the cores on the thermal properties of the dimers and the formation of N* phase have been studied. The results indicated that the chiral core was prone to induce the N* phase in LC dimer that contained nematic arms although the chirality of the core is very weak, while for the smectic LC arms containing CF3 terminal, the removal of the flexible spacer between chiral core and rigid LC units was conducive to the formation of N* phase. For example, TFBDA-(R)PD and TFBDA-IB displayed SmA* phase, while TFBA-(R)PD and TFBA-IB exhibited N* phase. However TFBA-(R,S)PD did not display N* phase, which reminded us that the chirality of the core and the conformation of the dimer also played an influence in the formation of the LC phase.     

The antioxygen radiation properties of the nanocomposite film consisted of hydrogenated amorphous carbon (a-C:H) and MoS2

MoS₂/a-C:H multilayer film and MoS₂/a-C:H composite film exhibit excellent tribological properties in vacuum, which can be used as the potential space lubricant. The radiation-protective properties of these two films in atomic oxygen (AO) are evaluated. The influences of AO radiation on structure, morphology, and tribological properties of the films were investigated. The results show that AO radiation mainly causes oxidation and increases sp² C content in both of the films. Furthermore, the MoS₂ sublayer on the surface of the multilayer film is oxidized heavily, whereas both the MoS₂ and the a-C:H matrix on the surface were oxidized in the composite film. As a result of this, the multilayer film exhibits high friction coefficient and short sliding lifetime in vacuum after AO radiation. Compared with that, the composite film exhibits lower friction and longer sliding time more than 3600 seconds in vacuum, which illustrates it has a good AO radiation protection. This indicates that MoS₂/a-C:H composite film is more likely to be used as a potential space lubricant.     

Synthesis and mesomorphic behaviour of new discotic liquid crystalline compounds containing triphenylamine as a core moiety via Sonogashira coupling

Design and synthesis of cholesterol based disk-like liquid crystalline compounds using triphenylamine as a core moiety have been achieved by Pd-catalyzed cross-coupling reaction. The newly synthesized compounds exhibit a cholesteric phase with fingerprint texture as well as oily texture. In the low temperature region, there is a signature of smectic B with characteristic dendritic and mosaic textures. The mesogenic properties were characterized by polarizing microscopy, differential scanning calorimetry and HRXRD studies.     

Alignment of liquid crystals on solution-processed HfZnO films via ion beam irradiation

Liquid crystal (LC) alignment layers were prepared by fabricating solution-processed HfZnO films, annealing them, and treating them with ion beam (IB) irradiation, and the effect of annealing temperature upon the resulting film properties was studied. Homogeneous LC alignment was achieved on IB-irradiated HfZnO films. Topographical changes were observed from field-emission scanning electron microscopy as annealing temperature increased. X-ray photoelectron spectroscopy analysis showed that IB irradiation resulted in oxidation of HfZnO surfaces, which caused the LCs to be oriented more uniformly. The best electro-optical characteristics observed corresponded to the annealing temperature of 200°C. The low optimal annealing temperature for fabricating the HfZnO films suggested that this material has remarkable potential for LCD applications.     

New liquid‐crystal alignment agents based on fluorinated polyimides with trifluoromethyl‐substituted benzene or diphenylether in the side chain

Fluorinated copolyimides derived from 4,4′‐oxydiphthalic anhydride (ODPA) with 4,4′‐oxydianline (ODA) and trifluoromethyl‐containing aromatic diamines have been synthesized and characterized. The trifluoromethyl‐containing diamines include 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, 3,5‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] benzamide, 3,5‐diamino‐1‐[(3′‐trifluoromethyl) phenyl] benzamide, 1,4‐bis(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl) benzene, 3,5‐diaminobenzenetrifluoride, 4,4′‐diamino‐4″‐(p‐trifluoromethyl phenoxy) triphenylamine, and 4‐[(4′‐trifluoromethylphenoxy) phenyl]‐2,6‐bis(4″‐aminophenyl)pyridine. Strong and flexible copolyimide films, produced by casting the polyamic acid solution followed by thermal imidization, exhibited great thermal stability and high mechanical properties. The polyimides had an ultraviolet–visible absorption cutoff at 330–340 nm and pretilt angles as high as 20° for nematic liquid crystals, making them great potential candidates for advanced liquid‐crystal display applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1583–1593, 2002     

The influence of benzene rings on aromatic pathways in the porphyrins

Magnetically induced current density for tetraazaporphyrins (H₂ATP), phthalocyanine (H₂Pc), and tetrabenzoporphyrin (H₂TBP) molecules has been computed. The calculated current strengths for H₂ATP and H₂TBP were found to be close to these of free base porphyrin (27 nA/T). The current strengths appeared to have greater value than the same ones for H₂Pc (21.7 nA/T). The joining of benzene rings to free base porphyrin and to H₂ATP causes to appear the additional weak ring current densities. The H₂Pc have a degree of aromaticity less than porphyrins according to magnetic criterion. © 2013 Wiley Periodicals, Inc.