Superior electro-optical performance in vertically aligned liquid crystal devices based on aluminum oxide films

We achieved vertically aligned (VA) liquid crystals (LCs) on aluminum oxide (Al₂O₃) films deposited via e-beam evaporation using a rubbing treatment. Uniform and vertical LC alignment was achieved and high thermal stability was obtained using these substrates. By analyzing measurements from optical retardations, we confirm that the LC orientation is adjustable using rubbing treatment. The superior electro-optical characteristics of the VA cells based on Al₂O₃ films are measured and compared with those based on polyimide layers, indicating that this approach will allow the fabrication of high-performance, advanced LC displays using a conventional rubbing process.     

Effect of crosslinking polymer networks on the molecular reorientation and electro‐optical performance of in‐plane switching vertically aligned liquid crystal devices

The effects of crosslinking polymer networks (PNs) on the molecular reorientation and electro‐optical properties of vertically aligned (VA) liquid crystal (LC) devices are investigated by applying an in‐plane switching (IPS) electric field. Through the polymerization process, crosslinking PNs are developed on the substrate surface, effectively increasing the anchoring energy and governing the LC molecular reorientation. With its stronger anchoring effect, the PNs cell shows good light transmittance and excellent vertical alignment quality, as compared to the pure LC cell. Furthermore, the alignment transformation and transmittance bounce resulting from the transient process of LC molecular reorientation are eliminated when the cell is operated at high voltages. The rising‐time (t_r) and falling‐time (t_f) responses of the PNs cell are significantly improved, and around 36% improvement in the optical switching response is obtained. In addition, the dynamic gray‐level t_r and t_f responses of the PNs cell are enhanced by around 55% and 42%, respectively, at a low driving voltage (～12 V). This developed VA‐IPS LC/PNs cell benefits not only the LC molecular alignment but also the electro‐optical performance. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1123–1130     

Electrically controlled director slippage over a photosensitive aligning surface; in-plane sliding mode

We have studied the electro-optical characteristics of a homogeneously aligned nematic liquid crystal (LC) with weak planar anchoring of the director at the bounding substrates. By using the in-plane switching (IPS) of the LC which is achieved by an in-plane electric field, the driving voltage was confirmed to be far less than that of the conventional IPS mode in which both substrates possess strong anchoring characteristics. Moreover, because of the absence of strong subsurface director deformations, the cell could operate optically in the Mauguin regime. Using these features we propose a new type of LC switching mode - in-plane sliding (IPSL) mode. We have realized this mode in a LC cell comprising one reference substrate with strong director anchoring and one substrate covered with photoaligning material with weak anchoring. In order to clarify the switching process, we derived a simplified expression for the threshold voltage on the assumption of uniformity of the in-plane electric field. For the dynamical response of the LC to the in-plane electric field, the switching on and off relaxation times of the IPSL mode were found to be longer than for the traditional IPS mode. However, we have proposed an optimized cell geometry for the IPSL mode with a response time comparable to that of the IPS mode.     

A New Chemo‐Enzymatic Route to Side‐Chain Liquid‐Crystalline Polymers: The Synthesis and Polymerization of 6‐(4‐Methoxybiphenyl‐4′‐oxy)hexyl Vinyl Hexanedioate

A novel synthetic method combining chemo and enzymatic synthesis strategies was employed to prepare a vinyl acetate type monomer, 6‐(4‐methoxybiphenyl‐4′‐oxy)hexyl vinyl hexanedioate (VA‐LC). Homo‐ and copolymers of VA‐LC with maleic anhydride (MAn) were prepared by conventional free radical polymerization using 2,2′‐azobisisobutyronitrile (AIBN) and 1,1′‐azobis (cyclohexane carbonitrile) (AHCN) as an initiator at 95 and 60 °C, respectively. The thermal properties of the generated polymeric material were investigated by differential scanning calorimetry (DSC), and the optical texture was inspected by polarizing optical microscopy (POM). While the monomer VA‐LC does not exhibit liquid‐crystalline properties, poly(VA‐LC), and the alternating copolymer of VA‐LC with maleic anhydride both displayed such properties.

     

Optical behaviour of photoimageable cholesteric liquid crystal cells with various novel chiral compounds

In theory, both polarity and steric hindrance are basic factors which affect molecular interactions. To investigate the optical properties and steric structures of chiral compounds having different chiral moieties which affect the wavelength of light reflection in liquid crystal (LC) cells, a series of novel chiral compounds and azobenzene derivatives were synthesized. The liquid crystalline phases of the compounds were identified using small angle X‐ray diffraction, differential scanning calorimetry and polarizing optical microscopy. Cholesteric LC cells with various synthesized chiral dopants which selectively reflect visible light were first prepared, the photochemical switching behaviour of colours was then investigated, with special reference to the change in transmittance in cholesteric LC cells containing an azobenzene derivative as a photoisomerizable guest molecule. Reversible isomerization of azobenzene molecules occurred in the cholesteric systems, resulting in a depression of T _ChI and a shift of the selectively reflected wavelength. We discuss the photochemically driven change in the helical pitch of the cholesteric LCs with respect to structural effects involving the chiral moieties. Molecular interactions caused by the added dopants, reliability and stability of the photoisomerization, and UV irradiation effects on the cholesteric LC cells were also investigated. A real image was recorded through a mask on a cholesteric LC cell fabricated in this investigation.     

Optical behaviour of photoimageable cholesteric liquid crystal cells with various novel chiral compounds

In theory, both polarity and steric hindrance are basic factors which affect molecular interactions. To investigate the optical properties and steric structures of chiral compounds having different chiral moieties which affect the wavelength of light reflection in liquid crystal (LC) cells, a series of novel chiral compounds and azobenzene derivatives were synthesized. The liquid crystalline phases of the compounds were identified using small angle X-ray diffraction, differential scanning calorimetry and polarizing optical microscopy. Cholesteric LC cells with various synthesized chiral dopants which selectively reflect visible light were first prepared, the photochemical switching behaviour of colours was then investigated, with special reference to the change in transmittance in cholesteric LC cells containing an azobenzene derivative as a photoisomerizable guest molecule. Reversible isomerization of azobenzene molecules occurred in the cholesteric systems, resulting in a depression of T_ChI and a shift of the selectively reflected wavelength. We discuss the photochemically driven change in the helical pitch of the cholesteric LCs with respect to structural effects involving the chiral moieties. Molecular interactions caused by the added dopants, reliability and stability of the photoisomerization, and UV irradiation effects on the cholesteric LC cells were also investigated. A real image was recorded through a mask on a cholesteric LC cell fabricated in this investigation.     

Study of dynamic light scattering in nematic liquid crystal and its optical,electrical and switching characteristics

In the present study, the polarisation-independent dynamic light scattering (DLS) in a nematic liquid crystal (LC) with a negative dielectric anisotropy has been compared in two operating modes by applying DC voltage or AC voltage to LC cells with a vertical and hybrid alignment. The attenuation of light transmittance and the DLS optical threshold without polarizers as well as a phase retardation of LC bend–splay deformation and a Fredericks threshold voltage with polarizers have been determined. Diffuse scattering of a light beam and broadband transmittance spectra of LC cells have been examined using the DC voltage in the interval of 0–40 V. Multi-domain structures and turbulent flows in the LC cells have been observed by polarisation optical microscope. The results show that the enhancement of the diffuse scattering of light in the LC cells correlate with ion density increase. The largest attenuation of the light intensity in the LC cells with a vertical alignment was 16.4 dB at a wavelength of 650 nm with a minimum decay time equal to 2.5 ms at DC voltage of 60 V. Our study has been shown that switching from a diffuse light scattering state to a transparent state can be twice accelerated by applying AC voltage with high frequency to LC cells.     

Mixed-field-switching liquid crystal mode using in-plane and fringe fields self-adjusted by bottom floating electrode for transmittance enhancement

We demonstrate a liquid crystal (LC) mode switched by mixed electric fields of in-plane and fringe fields, which are self-adjusted by adopting a bottom floating electrode for enhanced electro-optical properties. In our LC mode structure, conventional in-plane switching (IPS) electrodes are formed as pixel electrodes and common electrodes on an insulating layer and floating electrodes that are patterned per the sub-pixels. When the areas of the pixel and common electrodes are identical, the voltage of the bottom floating electrode is spontaneously determined to be half the value of the pixel voltage, which ideally generates symmetric fringe fields with both pixel and common electrodes. Due to the in-plane fields additionally generated between the pixel and common electrodes, the proposed LC structure operates by mixed-field switching (MFS), which shows higher transmittance than fringe-field switching (FFS) and IPS LC modes. Transmittance of the conventional FFS and IPS LC modes is highly sensitive to the in-plane electrode’s width (w) and spacing (l) condition, but the proposed MFS LC mode shows good transmittance without degradation with large variations of the in-plane electrode’s spacing-to-width ratio (l/w).     

Viewing angle characteristics of a homogeneously aligned two-domain liquid crystal cell with an inter-digitated electrode

The in-plane switching (IPS) mode in liquid crystal displays is known to exhibit a wide viewing angle. However, since the LC director rotates in one direction in the plane, devices with a single domain exhibit both a colour shift depending on the viewing angle, and greyscale inversion at specific angles especially at low grey levels. This has been improved by wedge shaped electrodes so that fields in two directions exist inside a pixel, causing the LC molecules to rotate in opposite directions to compensate each other; this acts as a virtual two domains structure. Nevertheless, the colour shift still exists to some extent, especially at low grey levels. In this paper, we propose a realistic two-domain IPS mode that exhibits a minimized colour shift at all grey levels on changing the viewing direction. In this device, the LC molecules are initially aligned in two directions orthogonal to each other, and two field directions exist perpendicular to each other. We have performed device simulations with respect to viewing angle characteristics, and found that IPS devices with a real two-domain structure reduce the variation of the retardation more effectively, when the viewing direction changes.     

Twisted nematic LC mode with high electro-optical performance and high thermal endurance formed using IB-irradiated poly(methyl methacrylate) as an alignment layer

We obtained homogeneously aligned liquid crystals (LCs) on ion beam (IB) irradiated poly(methyl methacrylate) (PMMA) by controlling the IB energy. We then examined the LC alignment state using polarized optical microscopy and conducted thermal stability testing. We obtained homogeneous LC alignment at IB energies above 1,400 eV, indicating that strong IB energy facilitates the alignment of LCs on the PMMA surface. This surface was analyzed by atomic force microscopy, and the contact angles (CAs) were measured to elucidate the mechanism of LC alignment. The increased surface energy strengthened the van der Waals interaction between the surface and LCs, thereby inducing stable, homogeneous LC alignment. Electro-optical (EO) characteristics were measured using twisted nematic (TN) LC mode. Compared to LC cells with conventionally used rubbed polyimide (PI), the LC cells with IB-irradiated PMMA exhibited higher thermal budgets and good electro-optical characteristics. These new LC cells have promising potential for advanced LC displays.     

Suppressing pretilt angle for enhancing black quality in diagonal viewing angle of homogenously aligned liquid crystal display

The diagonal viewing angle light leakage in a black state of in-plane switching (IPS) liquid crystal display (LCD) associated with pretilt angle has been investigated. The mechanical rubbing process with a cloth causes relatively high pretilt angle in the homogenously aligned liquid crystals (LCs) so that the tilted LC director results in increase of a light leakage in a black state at diagonal viewing angles. In this study, we theoretically estimated using classical optic theory how the light leakage in a black state at diagonal viewing angle is associated with the pretilt angle and also proposed an effective method to reduce the pretilt angle from 1.5° to 0° in rubbed IPS LCD by utilising polymer stabilisation. With this approach, we could successfully acquire a better black quality in all viewing angles as compared with normal IPS LCD.     

IPS mode investigation of liquid crystal alignment on organic hybrid overcoat layer via ion beam irradiation

The nematic liquid crystal alignment capability and electro‐optical (EO) performance characteristics of in‐plane switching (IPS) cells were first demonstrated on organic hybrid overcoat layers via ion beam irradiation. Usually the organic hybrid overcoat is used as the material for making a plate alignment layer in a colour filter process. To characterise the organic hybrid overcoat layer, we analysed the surface composition of the organic hybrid overcoat by X‐ray photoelectron spectroscopy. The results show that the intensity of C = O and C–O bonding undergoes a change corresponding to the changes in energy of the ion beam exposure. Moreover, EO performance characteristics of IPS cells on the organic hybrid overcoat layer via ion beam irradiation were observed to have similar characteristics to the polyimide.     

A liquid crystal cell with double-side protrusion electrodes for fast response and low-voltage operation

We propose a homogeneously aligned liquid crystal (LC) cell with double-side protrusion electrodes for fast response and low-voltage operation. In the proposed device, both the bottom and top substrates have pixel electrodes to generate the fringe electric field. Because the penetration depth of the electric field is increased owing to the protrusion electrodes, the operating voltage is very low and the turn-on time is dramatically reduced compared with the conventional in-plane switching (IPS) mode. Moreover, LC molecules anchored strongly to the penetrated protrusion electrodes on both substrates exert a strong restoring force, resulting in a fast turn-off time. We found that the total response time of the LC cell with the proposed structure is three times faster than that of the conventional IPS mode.     

Fast fringe-field switching of vertically aligned liquid crystals between high-haze translucent and haze-free transparent states

We report control of the haze value in a liquid crystal (LC) cell driven by a fringe electric field. When a fringe field is applied to a vertically aligned (VA) cell, a large spatial phase difference with a short grating period is induced in the LC layer. The average grating period of a VA cell driven by a fringe field is a quarter of the pitch of the interdigitated electrodes, which is half of the grating period of a VA cell driven by an in-plane field. Moreover, a sharper spatial phase profile is built around the edges of the interdigitated electrodes, which led to a high haze of 84.3% in the translucent state. The device was haze-free in the transparent state owing to the use of an LC layer without a polymer structure. To increase the haze value of the LC device while retaining a short response time, we developed an LC cell with crossed interdigitated electrodes where a large spatial phase difference is induced with little dependence on the azimuth angle. By applying a fringe electric field to a 20 μm thick LC cell using crossed interdigitated electrodes, we demonstrated a very high haze of 95.4% and a response time of less than 5 ms.     

Study on colour characteristics depending on orientation of liquid crystal in the in-plane switching mode

The degree of colour shift depending on viewing direction in the in-plane switching (IPS) mode has been investigated. The IPS cell with pure twist deformation exhibits a stronger colour shift than that of the IPS cell with tilt as well as twist deformation, although the former has better luminance uniformity in the bright state than the latter. Furthermore, the IPS cell with multi-directional LC orientation, with tilt as well as twist deformation, shows the least colour shift.     

Bulk-mediated in-situ homogeneous photoalignment induced by reactive mesogen containing diphenylacetylene moiety

ABSTRACT

We designed and synthesised a reactive mesogen containing diphenylacetylene moiety in the mesogenic core and two polymerisable acrylate groups at both ends. By irradiating linearly polarised UV light on the conventional host LC mixture containing a small amount of the synthesised reactive mesogen in a sandwiched cell without an alignment layer, we demonstrated an in-situ photo-induced homogeneous alignment of liquid crystals without a pre-treated alignment layer, which was achieved by an irreversible polarisation-selective [2 + 2] photodimerization of diphenylacetylene moiety with linearly polarised UV irradiation at above the isotropic temperature of LC mixture. The resulting homogeneous alignment showed a superior initial dark state, negligible pretilt angle and excellent stabilities. Furthermore, the in-plane switching (IPS) LC cell prepared by this method exhibited a better dark state and electro-optic performance compared to that with conventional-rubbed polyimide alignment layer. The single photoirradiation process automatically resulted in a perfect alignment matching of optical axes between the top and bottom substrates in the LC cell, giving rise to an excellent dark state overcoming an intrinsic misalignment issue and complex fabrication process. The proposed in-situ alignment method is a promising candidate for cost-effective, green-manufacturing, and high-quality alignment technique in the manufacturing of high-resolution liquid crystal displays.     

Study on colour characteristics depending on orientation of liquid crystal in the in‐plane switching mode

The degree of colour shift depending on viewing direction in the in‐plane switching (IPS) mode has been investigated. The IPS cell with pure twist deformation exhibits a stronger colour shift than that of the IPS cell with tilt as well as twist deformation, although the former has better luminance uniformity in the bright state than the latter. Furthermore, the IPS cell with multi‐directional LC orientation, with tilt as well as twist deformation, shows the least colour shift.     

Electro‐optical characteristics in phase separated liquid crystal/photo‐curable acrylic monomer mixture system

One of the main objectives of the experiment was to achieve the vertical aligned (VA) effect. To accomplish this, we employed liquid crystal (LC)/photo‐curable acrylic monomers mixture systems to prepare vertical alignment copolymer film (VACOF) for LC molecules with the photo‐polymerization induce phase separation (PIPS) process. From previous experimental results, we successfully fabricated LC devices without the micro‐protrusion structure. After the application of a saturated voltage, the LC molecules actually exhibited such interesting phenomena as uniaxial orientation, uniform single‐domain display state, etc. In this study, to obtain VACOF with smooth surface, we similarly controlled appropriate experimental conditions such as UV light exposure intensity and curing temperature, and altered process parameters such as the cell thickness, chemical structure length of the main chain type biphenol acrylic monomer [to simulate the main chain function of the traditional vertical alignment type polyimide (PI)], etc. During the experiment, we discovered that regardless of the cell thickness, this photo‐alignment system would yield the VACOF instead of the polymer disperse liquid crystal (PDLC) film morphology. Another notable finding was that the contrast ratio was heavily influenced by the length of the main chain type acrylic monomer structure for LC/monomer mixture systems, with enhancement of up to ～56%. Therefore, we further investigated the display effects, electro‐optical properties, etc. for these two main chain type acrylic monomer systems with different lengths and cell thicknesses. Copyright © 2011 John Wiley & Sons, Ltd.     

Crucial influence of polar alignment on the dynamics of in-plane switching cells

We investigated theoretically the dynamics of in-plane switching (IPS) cells with small pretilt angle and found that the liquid crystal director variation causes optical bounce after switching on an applied voltage. We analysed the behaviour of the director by computer simulation and found that the optical bounce occurs during the rising period with the normal twist and tilt angles of the directors in the IPS cell in the absence of the field-induced backflow effect. Pretilt angle is the source of this optical bounce.     

Crucial influence of polar alignment on the dynamics of in-plane switching cells

We investigated theoretically the dynamics of in-plane switching (IPS) cells with small pretilt angle and found that the liquid crystal director variation causes optical bounce after switching on an applied voltage. We analysed the behaviour of the director by computer simulation and found that the optical bounce occurs during the rising period with the normal twist and tilt angles of the directors in the IPS cell in the absence of the field-induced backflow effect. Pretilt angle is the source of this optical bounce.