Blue phase liquid crystals affected by graphene oxide modified with aminoazobenzol group

Liquid-crystalline blue phases (BPs) are stable only for very narrow temperature range between the isotropic and the chiral nematic phase that severely hinders their applicability. Herein, the aminoazobenzol group was chemically grafted onto epoxy group of graphene oxide (GO) via addition reaction. Successful grafting of aminoazobenzol group was confirmed using X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), UV–vis absorption spectra and thermogravimetric analysis (TGA). The resultant aminoazobenzol group–modified GO sheets, which is reduced (RGO-Az), were easily redispersable in common organic solvents or liquid crystals (LCs). By doping different contents of RGO-Az, nanosheets could stabilise BP and increase the BP range. When doped with 0.5 wt% RGO-Az, the mixtures show the wider range with 5.9°C than the range with 3.6°C of BPLCs without RGO-Az. Meanwhile, the phase sequence and the range of the aforementioned phases are reproducible upon heating and cooling, which shows that the BPs doped with RGO-Az nanosheets are thermodynamically stable.     

Low-voltage polymer-stabilised blue-phase liquid crystals with oleic acid (OA)-modified LaF3 nanoparticles

The resultant oleic acid (OA)-modified LaF₃ (OA-LaF₃) NPs were easily dispersed well in common organic solvents or liquid crystals (LCs). Usually, the stability of BPs depends on a well-arranged double-twisted alignment and a stable defect. Theoretical simulation shows that the BPLCs is likely to trap the doped nanoparticles due to the elastic interactions.By means of the OA-LaF₃ NPs we synthesized and doping into conventional polymer-stabilized blue phase liquid crystals (PS-BPLCs), it was observed that the on-state voltage can be reduced by 41% when the PS-BPLCs doped with 0.8wt. % OA-LaF₃ NPs compared with that PS-BPLCs without OA-LaF₃ NPs. It showed significant effects on the driving voltage when doping OA-LaF₃ NPs to PS-BPLCs. Our studies will certainly provide an effective and simple method to stabilize cubic BP structures and improve the electronic-optical performances, leading to potential applications in areas of displays as well as optoelectronic devices.     

Effects of thiophene-based mesogen terminated with branched alkoxy group on the temperature range and electro-optical performances of liquid crystalline blue phases

A series of symmetrically thiophene-based bent-shaped molecules with branched terminal was synthesised and characterised. Then, their effects as dopants on the blue phase (BP) range of the chiral nematic liquid crystal (N*LC) host were investigated. It was found that the bent-shaped dopants with branched terminal had better miscibility in LC host than the bent-shaped dopants with straight terminal, and contributed to induce BP and enhance the BP temperature range, with the maximum BP temperature range about 20.4°C. Besides, the electro-optical (E-O) performances of the blue phase liquid crystal doped with Th-BC6 (a bent-shaped dopant with the widest induced BP range in N*LC) were also explored. It was found that the drive voltage reduced first and then increased with the doping amount of Th-BC6 increasing. When the doping amount of Th-BC6 was about 15 wt%, the hysteresis could be strikingly reduced.     

A strategy to incorporate monodispersed PbS nanoparticles into ordered mesoporous silica monolith

A new synthetic procedure has been developed for the preparation of ordered mesoporous silica monoliths doped with uniform PbS nanoparticles (NPs). Ordered mesoporous silica monoliths functionalized with thiol groups have been synthesized through co-condensation method in a lyotropic liquid crystalline system. Thiol groups on the interior wall facilitate the incorporation of Pb²⁺ cations and the formation of PbS NPs inside the ordered mesopores. Combined analysis results indicate that the PbS NPs with a uniform particle size of about 2.5 nm are mostly confined inside the ordered pores of hosts. A great blue shift in the absorbance spectrum has been observed, which shows an obvious quantum confinement effect.     

Synthesis and crystal structure of bis(O-methyl hydrogenato carbonodithioate)-Pb(II): structural,optical and photocatalytic studies of PbS nanoparticles from the complex

Abstract

Lead(II) methyl xanthate [Pb(S₂COMe)₂] was synthesized and characterized by single crystal X-ray crystallography. The molecular structure showed a distorted tetrahedral geometry around Pb(II) with each monomeric unit linked with another through Pb···S interactions. The compound was used to prepare hexadecylamine capped PbS (HDA-PbS) and oleylamine capped PbS (OLA-PbS) nanoparticles. The PbS nanoparticles were indexed to the cubic PbS crystalline phase with particle sizes of 4.5 – 34.5?nm. The estimated optical bandgaps obtained from the tauc’s plots were 3.47 and 3.30?eV for HDA-PbS and OLA-PbS, respectively, which are blue shifted in comparison to bulk PbS. The photodegradation of methylene blue using PbS as photocatalyst shows that HDA-PbS have the best degradation efficiency of 77.70% after 240?min.     

The effects of silica nanoparticles on blue-phase liquid crystals

We investigate the effects of hydrophobic silica nanoparticles (SNs) on blue-phase liquid crystals (BPLCs). The optical microscope and reflection spectra observation reveal that a tiny hydrophobic SN dopant stabilises the BPLC phase, and widens the temperature range of the BP I phase. Furthermore, the doped dilute SNs can fine-tune their positions to relax the formation stress of the BPLC lattices, and slightly increase the platelet sizes of the BPLCs. The doped SNs also decrease the driving voltage and response time of the BPLC cell, because the added SNs decrease the elastic constant of the LC host and the relaxation time constant of the BPLC mixture.     

Synthesis and photophysics of leadsulphide nanocrystallites

Nanoparticles of lead sulphide have been stabilized in the presence of excess Pb²⁺ in aqueous basic medium by a simple chemical route of synthesis. These PbS nanoparticles were synthesized very conveniently at room temperature using hexametaphosphate as stabilizer. These nanoparticles have an absorption extending into the NIR region. A significant quantum confinement effect made the bandgap of lead sulphide nanoparticles produce a blue shift from 0.41 eV to about 1.5 eV. The size and morphology of the particles were studied by TEM. Particles were relatively small sized (about 6 nm) having narrow size distribution. XRD data analysis indicate that the product is a mixture of PbS, PbO and Pb(OH)₂. Both XRD pattern and HRTEM images confirm the crystalline structure of lead sulphide crystals. IR spectroscopy indicates the formation of PbS. PbS nanoparticles were fairly stable and could be stored for about three weeks at room temperature and for about two months at 5°C without agglomeration. These particles were photoactive and sensitized the reaction of aniline by light leading to the formation of azobenzene.     

Blue phase III widening in CE6-dispersed surface-functionalised CdSe nanoparticles

The phase transition behaviour of the chiral liquid crystal CE6 doped with spherical surface-functionalised CdSe nanoparticles has been examined by means of high-resolution adiabatic scanning calorimetry and polarising microscopy. The addition of nanoparticles results in an essentially stabilised blue phase III. The phase diagram is displayed upon heating and cooling and the enthalpy changes involved in the conversion between the blue phases are determined. The dispersion of functionalised nanoparticles is prominent for the stabilisation of blue phase III, which is potentially useful for applications, especially if applied on liquid crystals that exhibit blue phases close to room temperature.     

Frequency‐Driven Self‐Organized Helical Superstructures Loaded with Mesogen‐Grafted Silica Nanoparticles

Adding colloidal nanoparticles into liquid‐crystal media has become a promising pathway either to enhance or to introduce novel properties for improved device performance. Here we designed and synthesized new colloidal hybrid silica nanoparticles passivated with a mesogenic monolayer on the surface to facilitate their organo‐solubility and compatibility in a liquid‐crystal host. The resulting nanoparticles were identified by ¹H NMR spectroscopy, TEM, TGA, and UV/Vis techniques, and the hybrid nanoparticles were doped into a dual‐frequency cholesteric liquid‐crystal host to appraise both their compatibility with the host and the effect of the doping concentration on their electro‐optical properties. Interestingly, the silica‐nanoparticle‐doped liquid‐crystalline nanocomposites were found to be able to dynamically self‐organize into a helical configuration and exhibit multi‐stability, that is, homeotropic (transparent), focal conic (opaque), and planar states (partially transparent), depending on the frequency applied at sustained low voltage. Significantly, a higher contrast ratio between the transparent state and scattering state was accomplished in the nanoparticle‐embedded liquid‐crystal systems.     

Band gap tailoring of chemically synthesized lead sulfide thin films by in situ Sn doping

In the present report, undoped and tin (Sn)‐doped lead sulfide thin films were synthesized via chemical bath deposition method. The effects of Sn molar concentration on the optical, structural, and morphological properties were systematically studied. The concentration of Sn in the chemical bath was characterized by the ratio of [Sn⁺²]/[Pb⁺²] and varied from 0 to 15 at.%. Both doped and undoped thin films were polycrystalline in nature with a face‐centered cubic crystal structure; however, the preferred orientations of the crystallites were varied along the (111) and (200) planes with Sn‐doping concentration. The X‐ray powder diffraction results also showed that peak intensities and the crystalline size were decreased with increasing Sn concentration. The lattice constant varied with Sn concentration and found in the range of 6.020 to 5.944 Å. The variation of Sn concentration in PbS:Sn thin films were confirmed by energy dispersive X‐ray analyses study. The scanning electron microscope and atomic force microscopy studies revealed that Sn doping had a critical role on the surface roughness and morphology of the PbS:Sn thin films. The optical band gap study showed that the band gap of PbS:Sn thin films were engineered from 0.676 to 1.345 eV because of incorporation of Sn⁺² ions via cost‐effective chemical route. Room temperature photoluminescence spectra showed a well‐defined peak at 427 nm and shoulders at 405 and 462 nm for all Sn‐doped and undoped PbS samples.     

In situ Synthesis and Lubrication of PbS Nanoparticles in Lamellar Liquid Crystal

The partial phase diagram of the Triton X-100/C₁₀H₂₁OH/H₂O system was determined. PbS nanoparticles were synthesized in solvent layer of Triton X-100/C₁₀H₂₁OH/H₂O lamellar liquid crystal. The size of PbS nanoparticles was about 8 nm and limited by the thickness of the solvent layer. Lubricities of the mixed system of Triton X-100/C₁₀H₂₁OH/H₂O lamellar liquid crystal and PbS nanoparticles were determined. The results showed that the lamellar liquid crystal and the mixed system showed higher load carrying capacity relative to the commercial grease. They are potential lubricants for Al alloy, especially at high load.     

笼形倍半硅氧烷修饰的金纳米粒子对4-正戊基4'-氰基联苯液晶性能的影响

为有效降低液晶器件的开启电压,获得具有低功耗特性的液晶显示器件。本文采用巯基功能化的笼形倍半硅氧烷(POSS)作为修饰配体,硼氢化钠为还原剂,采用一步法还原氯金酸制备出粒径约为5 nm的金纳米粒子。将该金纳米粒子以不同质量分数掺杂到向列相液晶4-正戊基4'-氰基联苯(5CB)中,研究了其对液晶黏度、阈值电压、相变温度的影响。结果表明,POSS修饰的金纳米粒子可以使液晶材料5CB的黏度降低、阈值电压减小。该金纳米粒子的掺入,拓宽了液晶材料的相变温度范围。     

Mo掺杂对纳米TiO2结构和活性的影响

利用Mo6 的掺杂在TiO2中引入缺陷,从而扩大TiO2催化剂的光谱响应范围。运用UV-Vis、XRD、XPS、TG-DTA等测试技术考察了钼离子掺杂浓度对于TiO2光催化剂吸收光谱范围、晶型、晶胞和晶粒的影响,分析了钼进入TiO2品格的方式、价态和掺杂催化剂在热处理过程中发生的物理和化学变化。以亚甲蓝溶液的光催化降解为模型反应,考察了掺杂量对这种新型光催化剂的光催化活性的影响。结果表明,Mo6 可进入TiO2晶格中形成杂质缺陷,引起TiO2品格膨胀,Mo6 的掺杂量影响TiO2晶粒尺寸和晶相转化。Mo6 掺杂的质量分数为4．5％时,样品的吸收带边可达460 nm,对40 mg/L亚甲蓝反应2 h的降解率为58．3％,矿化率为52．5%。而Mo6 的掺杂质量分数为3．0％和6．0％时,形成的TiO2晶粒尺寸较小,TiO2晶粒中锐钛矿相与金红石相的比例接近4:1时,对亚甲蓝降解率分别为56．6％和52．0％,矿化率分别为49．2％和44．2％。     

Influence of monomer structure on the properties of blue phase liquid crystal

In this paper, four kinds of polymer-stabilized blue phase liquid crystals (PS-BPLCs) with different monomer were designed and prepared. The morphology, temperature ranges and electro-optical properties of the blue phase were studied and discussed. The temperature ranges of four BPLCs are more than 90°C, and all samples can be stabilized well at room temperature. Referring to electro-optical performance, on-state voltage for mono-functional monomers systems is reduced from 75 V to 65 V at 497 nm. On-state voltage for tri-functional monomers systems is reduced from 107 V to 85 V at 497 nm. These results are helpful to the application of display and photonic devices.     

Enhancement of frequency modulation response time for polymer-dispersed liquid crystal

Through the ferroelectric nanoparticles of BaTiO₃ (BTO) doping, the response time for the frequency modulation of the polymer-dispersed liquid crystal (PDLC) was improved. The BTO-doped PDLC cells were prepared by polymerisation induced phase separation (PIPS) process using UV light. The capacitance of the PDLC composites was measured with an impedance analyzer in the frequency range of 100 Hz–1 MHz at 1 V. The dynamic signal for the response time of the PDLC devices was monitored through a digital oscilloscope. The electro-optical properties of the PDLC were found to strongly depend on the doped BTO concentration. The BTO doping caused a large increase in the capacitance. The dielectric constants were drastically decreased in the samples with rather low BTO doping ratio at a high frequency. No outstanding difference in the rising time of the LC was observed in the BTO-doped PDLC device, but the falling time was significantly decreased from 0.334 to 0.094 s. The present results imply that the nanoparticle-doping technology could improve the electro-optical performance of the PDLC requiring fast response and frequency modulation, such as optical modulators and PDLC-hybrid electroluminescence device for flexible electronic devices.     

Photoinduced liquid crystal blue phase by bent-shaped cis isomer of the azobenzene doped in chiral nematic liquid crystal

A photoresponsive azobenzene molecule DCAZO2 with two cholesteryl groups linked to both sides of the azobenzene group is doped in a mixture of nematic liquid crystal E7 and chiral dopant S811 (61.9 wt% E7, 36.1 wt% S811 and 2.0 wt% DCAZO2). Cooled from isotropic phase to 33.0°C, chiral nematic liquid crystal (N*LC) was formed in the sample and then the temperature was kept unchanged at 33.0°C. UV light irradiation induces the trans–cis photoisomerisation and thus an obvious phase transition. When the azobenzene groups isomerise to a cis-saturated state, the UV light was turned off and the white light was turned on at the same time. The bent-shaped cis isomer then turns back to the planar trans isomer gradually. A blue–green platelet texture representing cubic blue phase (BP) was observed and the size of the platelets was increased along with the cis–trans isomerisation. UV–vis absorption spectra indicate that the photoinduced BP exists when the isomerisation degree is between 79% and 18%, and further cis–trans isomerisation change BP back into N*LC. The large geometric structure of the cholesteryl groups and the large bent angle θ of the cis isomer are supposed to be responsible for the interesting result.     

Effects of silver nanoparticle doping on the electro-optical properties of polymer stabilized liquid crystal devices

ABSTRACT

Polymer stabilised liquid crystal (PSLC) devices are widely used in various smart light modulation occasions. Their electro-optical properties can still be improved to address future challenges. It is well known that doping liquid crystal (LC) materials with nanoparticles can change the material’s electro-optical performance. In this study, silver nanoparticles (AgNPs) with size about 15–20 nm and surfactant were doped into PSLC devices. The effects of AgNPs doping on the PSLC electro-optical performances were studied. The result shows that AgNPs and surfactant doping can increase the dielectric anisotropy of LC mixture. PSLC devices with AgNPs doping have lower driving voltage and response time than un-doped PSLC devices. Therefore, doping of a specific concentration of AgNPs resulted in PSLC devices with improved electro-optical performance.     

Enhanced photoactivity of neodymium doped mesoporous titania synthesized through aqueous sol–gel method

Nanosize neodymium doped titania has been prepared by hydrolysis of titanium oxychloride followed by peptisation under acidic condition. The anatase to rutile phase transformation temperature was found to increase by 150 °C as a result of neodymium doping. The doped sample shows 10 times higher surface area than the undoped one after calcining at 700 °C. All the samples calcined at 500, 600 and 700 °C show type IV isotherm, which is characteristic of mesoporous material. The pore size distribution curves also show that the pores are in mesoporous region. Further, the neodymium doped titania shows increased photoactivity than the undoped titania with respect to decomposition of methylene blue when subjected to UV light. The transmission electron micrograph indicates that a nanocrystalline doped titania is obtained through the present method. The effect of neodymium doping on the anatase phase stability, specific surface area and photoactivity are reported.     

Synthesis of nickel bowl-like nanoparticles and their doping for inducing planar alignment of a nematic liquid crystal

Nickel bowl-like nanoparticles have first been synthesized by a magnetic self-assembly process stabilized by polyvinyl pyrrolidone (PVP) without any sphere-like materials as templates. A trace of doped bowls can induce liquid crystal (LC) molecules into a perfect planar alignment, attributable to their bowl-like shape and magnetic self-assembly into a 1D structure. It would provide a novel method of establishing LCs alignment by doping special nanostructured materials.     

Liquid crystal composites with a high percentage of gold nanoparticles

We have reported in our previous work that doping low concentrations (up to 10% by weight) of gold nanoparticles (GNP) in a polar nematic 4’-hexyl-4-biphenylcarbonitrile (HBPCN) increases the dielectric anisotropy, while the switching voltage and times, and the nematic–isotropic liquid (IL) transition point of the mixtures are not affected by doped nanoparticles. In the current work we extend our study of the behaviour of HBPCN doped with higher than 10% GNP. We show that at certain gold concentrations – 35% and 45% – the nematic–IL phase transition point increases by 15°C in comparison with the pure nematic value. At the same concentrations the dielectric anisotropy increases from its value for the pure nematic by about 2.2 times for 35% and twice for 45%. Also, the threshold voltage increases by 0.2 V for 35% and decreases by 0.15 V for 45%. However, the switching-off times decrease for both concentrations: 7 ms for 35% and 12 ms for 45%. We propose that the described effects of doped GNP on the properties of the nematic are due to the formation of different kinds of aggregations between two components of the mixtures.