Electrical conductivity and thermoelectric power of liquid Co–Sn alloys

The electrical conductivity and thermoelectric power of liquid Co–Sn alloys were investigated in a wide concentration and temperature range. It was shown that the electrical conductivity of the melts decreased with an increase of the Co content. The results are interpreted in the context of the s–d hybridisation model. The corresponding behaviour is caused by sharing electrons from one metal to another one. This is in agreement with the concept of Fermi enthalpy, according to which up to two electrons from Sn transfer to the uppermost bands of Co.     

Investigations on the electrochemical preparation of gold–nanoparticle composites

The role of electrical charges in the double layers of the electrode and in particles during the electrochemical preparation of dispersion coatings was studied for the systems Au/diamond and Au/Al₂O₃. The surface charge of the electrode under the conditions of electroplating will depend on the potential of zero charge (p.z.c.). For the nanoscaled particles the sign of the surface charge was estimated from the zeta potential in dilute solutions. Successful inclusion of Al₂O₃ and diamond nanoparticles was observed when the particles and the electrode were oppositely charged. The Vickers hardness of the layers was increased by the codeposition of Al₂O₃, whereas it decreased in the case of nanodiamond.Presented at the 3rd International Symposium on Electrochemical Processing of Tailored Materials held at the 53rd Annual Meeting of the International Society of Electrochemistry, 15–20 September 2002, Düsseldorf, Germany     

Photoluminescence of a 5CB liquid crystal–organomontmorillonite nanoparticle heterocomposite

Photoluminescence (PL) of a heterocomposite, consisting of the nematic liquid crystal (LC) 4-pentyl-4´-cyanobiphenyl (5CB) and anisometric nanoparticles of montmorillonite (MMT) clay, modified by cetyltrimethylammonium bromide (CTAB) has been investigated at 4.2 and 300 K. The incorporation of this organoclay (B4) to 5CB decreases the emission intensity by 7–8 times due to efficient resonant quenching of the exciting energy by the organoclay. The spectrum shifts to a long-wave region, with this effect being considerably larger at low temperatures. Graphical separation of complex bands, corresponding to the bulk 5CB and 5СВ?+?В4 heterosystem at both temperatures revealed that the presence of the organoclay resulted in a significant growth of LC dimer quantity, shifting spectra towards longer wavelengths. Changes in the 5CB luminescence under organoclay influence can be explained by quite strong interphase interactions specified earlier by infrared spectroscopy between the MMT surface and LC, and by a realisation of more flat conformations of 5CB molecules. Confinement effects prevent full crystallisation of 5CB in the 5CB?+?B4 composite, and LC dimer structures located in the organoclay near-surface layers on the outer surface of the nanoparticles and inside its galleries remain in a larger amount, at low temperature, when compared to bulk 5CB. The remaining LC crystallises and photoluminescence from the 5CB monomers becomes intense.     

Electrical and electro-optical parameters of 4ʹ-octyl-4-cyanobiphenyl nematic liquid crystal dispersed with gold and silver nanoparticles

Thermodynamical, dielectric, optical and electro-optical characterisation of pure 8CB and its composites with gold and silver nanoparticles have been studied. Thermodynamical studies suggest a decrease in clearing temperature of the nanocomposite systems as compared to the pure system. Dielectric parameters of pure nematic liquid crystal and nanocomposites in the homeotropic and planar aligned samples have been measured in the frequency range of 1–35 MHz. Ionic conductivity increases significantly in nematic and smectic A_d (SmA_d) phases, whereas dielectric anisotropy is almost unchanged for both the nanocomposites. Threshold voltage for Freederick transition, switching voltage and splay elastic constant have decreased in the case of nanocomposite systems. Relaxation frequency and activation energy of an observed relaxation mode corresponding to molecular rotation about the short axis increase in the SmA_d phases of both the nanocomposites. The optical study suggests that due to dispersion of nanoparticles, the optical band gap has decreased.     

Photochemical synthesis and characterization of hydrogel–silver nanoparticle composites

Research on Chemical Intermediates - Hydrogels were synthesized by grafting polyacrylamide onto dextran using N,N′-methylene-bis-acrylamide as a cross-linker. The hydrogels were converted...     

Laccase–gold nanoparticle assisted bioelectrocatalytic reduction of oxygen

It was found that homogeneous activity of Trametes hirsuta laccase is considerably diminished in the presence of gold nanoparticles (Au-NPs). Heterogeneous electron transfer studies revealed that Au-NPs facilitate direct electron transfer (DET) between the T1 copper site of the laccase and the surface of Au-NP modified electrodes. DET was characterized by the standard heterogeneous ET constant of 0.5 ± 0.6 s^?1 at Au-NPs with an average diameter of 50 nm. As a consequence of this a well pronounced DET based bioelectrocatalytic oxygen reduction with current densities of 5–30 µA cm^?2 has been achieved at the laccase–Au-NP modified electrodes.     

Electrical conductivity measurements of aqueous sodium chloride solutions to 600°C and 300 MPa

Electrical conductance measurements of dilute (<0.1>^–1) aqueous NaCl solutions were made primarily to quantify the degree of ion association which increases with increasing temperature and decreasing solvent density. These measurements were carried out at temperatures from 100 to 600°C and pressures up to 300 MPa with a modified version of the apparatus used previously in the high temperature study in this laboratory. Particular emphasis was placed on conditions close to the critical temperaturelpressure region of water, i.e., at 5° intervals from 370 to 400°C. The results verify previous findings that the limiting equivalent conductance A_o of NaCl increases linearly with decreasing density from 0.75 to 0.3 g-cm^–1 and also with increasing temperature from 100 to 350°C. Above 350°C. A_o is virtually temperature independent. The logarithm of the molal association constant as calculated exclusively from the data400°C is represented as a function of temperature (Kelvin) and the logarithm of the density of water (g-cm^–3) as follows:

Synthesis of cellulose–metal nanoparticle composites: development and comparison of different protocols

Deposition of nanoparticles on the surface of a variety of materials is a subject of great interest due to their potential applications in electronic devices, sensing, catalysis and bio-medical sciences. In this context, we have explored and compared various methodologies to generate gold and silver nanoparticles on the surface of cellulose fibers. It was found that boiling of the cellulose fibers in alkaline solution of gold and silver salts led to the formation and immobilization of gold and silver nanoparticles. However, in case of lecithin treated and thiol-modified cellulose fibers, high temperature was not essentially required for the formation and deposition of nanoparticles on cellulose substrate. In both these cases, fairly uniform metal nanoparticles were obtained in good yields (~43 wt% gold loading in case of thiol modified cellulose fibers) at room temperature. Borohydride-reduction method resulted in relatively lower loading (~22 wt%) with a wide size distribution of gold and silver nanoparticles on cellulose fibers. All these nanoparticle–cellulose composites were thoroughly characterized using scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared spectroscopy, UV–visible spectroscopy, and elemental analyzer. Thiol modified cellulose–gold nanoparticle composites served as active catalysts in the reduction of 4-nitrophenol into 4-aminophenol.     

Synthesis and properties of organic–inorganic hybrid liquid crystal gels

Organic–inorganic hybrid liquid crystal (LC) gels have been synthesised by the thiol-ene reaction of a multifunctional cyclic siloxane, 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (TVMCTS) and alkane dithiols, 1,6-hexanedithiol (HDT) or 1,9-decanedithiol (DDT), in LC matrices, 4-cyano-4?-pentylbiphenyl (5CB) or 4′-n-octyl-4-cyano-biphenyl (8CB). The LC gels were prepared in an isotropic phase at 70°C or mesophases at 25°C using radical initiators. The phase transition temperatures from a mesophase to an isotropic phase of the resulting gels were lower than those of the original LCs. The gels containing 8CB (8CB gels) prepared at 25°C showed two phase transitions: smectic-to-nematic and nematic-to-isotropic transitions. By contrast, the 8CB gels synthesised in the isotropic phase showed only one phase transition from smectic phase directly to isotropic phase. Reaction conversions in the LC gels prepared at 70°C were higher than that in the gels prepared at 25°C. Scanning microscopic light scattering analysis of the LC gels cleared homogeneous small size mesh with a small amount of large defect. Polarisation micrographs of the LC gels showed framed optical textures derived from the LC molecules at room temperature. The LC gels containing more than 90 wt% of LC showed electro-optic response.     

Thermal conductivity behavior of SiC–Nylon 6,6 and hBN–Nylon 6,6 composites

A study was performed to determine the effect of the content and orientation of fillers on the thermal conductivity of a polymeric composite packed with hexagonal boron nitride (hBN) and silicon carbide (SiC) fillers. The thermal conductivity behavior of SiC–Nylon 6,6 and hBN–Nylon 6,6 composites was more dependent on the orientation and shape of the filler than on its thermal conductivity. The thermal conductivity of SiC–Nylon 6,6 composites with 59 % (v/v) isotropic SiC fillers increased from 0.25 to 3.83 W/m K. That of hBN–Nylon 6,6 composites with 62 % (v/v) anisotropic hBN fillers increased from 0.25 to 2.16 W/m K in the perpendicular direction whereas in the parallel direction it increased rapidly to 8.55 W/m K .     

Thermal stability and conductivity of hot-pressed Si3N4–graphene composites

This study concerns new Si₃N₄–graphene composites manufactured using the hot-pressing method. Because of future applications of silicon nitride for cutting tools or specific parts of various devices having contact with high temperatures there is a need to find a ceramic composite material with good mechanical and especially thermal properties. Excellent thermal properties in the major directions are characteristic of graphene. In this study, the graphene phase is added to the silicon nitride phase in a quantity of up to 10 mass%, and the materials are sintered under uniaxial pressure. The mixture of AlN and Y₂O₃ is added as sintering activator to the composite matrix. The studies focus on thermal stability of produced composites in argon and air conditions up to the temperature of 1,000 °C. The research also concerns the influence of applied uniaxial pressure during the sintering process on the orientation of graphene nanoparticles in the Si₃N₄ matrix. The study also presents research on anisotropy of thermal diffusivity and following thermal conductivity of ceramic matrix composites versus the increasing graphene quantity. Most of the presented results have not been published in the literature yet.     

Electrical conductivity of AgI–CdI2–KI and AgI–CuI–KI ionic conducting systems

Samples of general formulae (AgI)_4?2x(CdI₂)_xKI and (AgI)_4?x(CuI)_xKI, x = 0–0.4, have been prepared and studied by conductivity measurements, powder X-ray diffraction and DSC techniques. Room temperature XRD reveals the presence of the orthorhombic K₂AgI₃ as the major component in the system. DSC traces show endothermic peaks in the temperature range of 309–330 K, depending on the sample composition. These are attributed to the solid state reaction between AgI and K₂AgI₃ to form the cubic KAg₄I₅. Impedance spectra show the prominence of electrode – electrolyte interface effect which is explained in terms of the high rate of ion migration. Ionic conductivity enhances with the increase of Cd²⁺ content, while Cu⁺ contained samples show a decrease in conductivity with increasing Cu⁺ ratio though the ionic conductivity remains higher than that of the pure one.     

Synthesis and mesomorphic properties of trifluorobenzoate liquid crystal

Four series of trifluorobenzoate liquid crystals have been synthesized. Their phase transition temperatures have been also measured by texture observation in a polarizing microscope and confirmed by DSC. The influence of the lateral fluoro-substitution and triple bond has been also discussed.     

Estimation of thermal conductivity of Na–K liquid metal alloy

For the first time the thermal conductivity of Na–K alloy has been computed using eight theoretical equations, already developed for binary liquid mixtures. The thermal conductivity values of Na–K alloy were obtained at three different temperatures (308,348,423) K, and at four different compositions of alloy. We have employed density and sound speed data for calculating λ alloy with the help of recently developed correlation. Density-Sound speed-thermal conductivity correlation gave excellent results.     

Electrically induced and thermally erased properties of side‐chain liquid crystalline polymer/liquid crystal/chiral dopant composites

The properties of synthesized side‐chain liquid crystalline polymer (SCLCP)/liquid crystal (LC)/chiral dopant composites having a chiral nematic (N*) phase at room temperature were investigated by polarized optical microscopy (POM) and a UV/VIS/NIR spectrophotometer. The composite exhibited a planar texture after it was filled into cells under homogeneous boundary conditions and it was transparent. When an electric field was applied to the composite, a focal conic texture was formed and the composite became light scattering. After the electric field was turned off, the light‐scattering state remained stable for some time, i.e. the light‐scattering state exhibited a memory effect. The focal conic texture changed into the planar texture when the composite was heated and the composite became transparent again. Therefore, the composite had electrically induced and thermally erased properties. The SCLCP had some influence on the memory effect and on the thermo‐electro‐optical properties of the composite.     

Dielectric,viscosity, and pitch measurements of a ferroelectric liquid crystal exhibiting the phase sequence smectic M–smectic C

Abstract

A chiral liquid crystal compound exhibiting the ferroelectric smectic C phase and the recently discovered ferroelectric smectic M phase has been studied by measurements of the Goldstone-mode relaxation frequency and dielectric strength, the spontaneous polarization, the tilt angle and the helical pitch. The data allow the determination of the Goldstone-mode rotational viscosity and the pitch controlling elastic constant. The results indicate that the smectic M phase is characterized by a larger molecular order within the smectic layers compared to the smectic C phase confirming the assumption of a tilted hexatic structure for the smectic M phase.     

How polar are ionic liquids? Determination of the static dielectric constant of an imidazolium-based ionic liquid by microwave dielectric spectroscopy

In a pilot study of the dielectric constant of room-temperature ionic liquids, we use dielectric spectroscopy in the megahertz/gigahertz regime to determine the complex dielectric function of five 1-alkyl-3-methylimidazolium salts, from which the static dielectric constant epsilon is obtained by zero-frequency extrapolation. The results classify the salts as moderately polar solvents. The observed epsilon-values at 298.15 K fall between 15.2 and 8.8, and epsilon decreases with increasing chain length of the alkyl residue of the cation. The anion sequence is trifluoromethylsulfonate > tetrafluoroborate approximately tetrafluorophosphate. The results indicate markedly lower polarities than found by spectroscopy with polarity-sensitive solvatochromic dyes.     

Preparation and characterisation of monolayers and Langmuir–Blodgett films of liquid crystal mixed with cubic silsesquioxanes

Polyhedral oligomeric silesquioxanes (POSS) with eight polyether substituents were mixed with the liquid crystal (LC) 4-octyloxy-4′-cyanobiphenyl and spread at the air/water interface. The surface pressure-area and surface potential-area isotherms were recorded for different weight ratios of both components. The obtained results showed that POSS molecules had beneficial influence on LC monolayer improving its stability and rigidity. Moreover, it was found that some LC–POSS mixtures collapse reversibly and form multilayer films on the top of LC monolayer. On the other hand, interfacial dilatational and shear rheology indicated decrease of elasticity of the films after mixing. Brewster angle microscopy revealed multilayer structure of the condensed film and formation of net-like structures in the expanded film. These films were successfully transferred on solid substrates using the Langmuir–Blodgett technique. The scanning electron microscopy images confirmed the film deposition and formation of networks by POSS–LC mixtures. These findings may be useful in the fabrication of electronic devices based on LCs.