An investigation on a novel PDLC film’s fabrication and its electro-optical properties

A polymer dispersed liquid crystal (PDLC) film that has good electro-optical properties is produced by the method of polymerized-induced phase separation. Based on the application foreground, its capability parameters, such as contrast ratio, work voltage, and visual angle, are characterized for the first time by a white light but not a fixed wavelength light. The results show the PDLC film has a low work-voltage of 20 V, more than 150° visual angle, high stability, and long lifetime. The differences between plastic and glass ITO-coated substrates of PDLC films are also studied in this paper. The plastic substrate has better property and will have a wider perspective especially in the portable, tender and folded display devices. Due to adjustable properties of film by electric field, PDLC has the potential application for display device, sensor, switch, grating, and new generation analytical apparatus.     

Effects of a chemically modified multiwall carbon nanotubes on electro-optical properties of PDLC films

Polymer dispersed liquid crystal (PDLC) films are fabricated by well-known polymerization-induced phase separation method. In this paper, the dispersion of multi-walled carbon nanotubes (MWCNT) in liquid crystals has been enhanced by chemical modification and we have investigated their effects on the morphology, electro-optical properties and conductivity of the PDLC films. Results indicated that the threshold voltage and the saturation voltage of PDLC films decreased with the increase of the doping concentration of MWCNT or chemically modified MWCNT, because carbon nanotubes can enhance the electric field by reducing the resistivity of the medium and increasing the capacitance of the cells. It can be viewed obviously that the contrast ratio of the PDLC films doped with the chemically modified MWCNT is higher than that of the MWCNT.     

A study on the polymer structures and electro-optical properties of epoxy-mercaptan-based polymer dispersed liquid crystal films

ABSTRACT

In this paper, polymer dispersed liquid crystal (PDLC) films based on epoxy-mercaptan system were prepared by thermal-initiated polymerization. The effects of the liquid crystal (LC) content, the proportion and the functionality of epoxy monomers on the polymer structures and electro-optical properties of the as-made PDLC films were investigated systematically. It was found that the morphologies of the polymer matrix can be altered from polymer meshes to polymer balls by increasing the LC content as well as the functionality of epoxy monomers. Accordingly, the electro-optical properties could be regulated by the morphologies of polymer networks. Especially, the as-made PDLC films with homogeneous porous structures exhibited the optimal electro-optical properties. Consequently, this work offers a meaningful approach to control the microstructures and optimize the electro-optical properties of PDLC films, which indeed can form a wonderful footstone for the wide application of PDLC.     

固化条件对聚合物分散液晶膜电光性能的影响

选用聚乙二醇二缩水甘油醚(EGDE)/季戊四醇缩水甘油醚(PERTGE)/1,8-二氨基-3,6-二氧杂辛烷(EDBEA)/向列相液晶(SLC1717)复合体系,在不同的固化条件下,通过热聚合诱导相分离方法制备了一系列电光性能不同的聚合物分散液晶(polymer dispersed liquid crystal,简称PDLC)膜.研究了固化温度和固化时间对制备的PDLC膜中聚合物网络的微观形貌和电光性能的影响.结果表明,随着固化温度的升高以及固化时间的缩短,PDLC膜的对比度、驱动电压和开态响应时间逐渐增大,而关态响应时间逐渐减小.在固化温度为363.2 K,固化时间为7 h时,所制备的PDLC膜具有较佳的电光性能.     

Effects of the fluorinated liquid crystal molecules on the electro-optical properties of polymer dispersed liquid crystal films

The different fluorinated liquid crystal (LC) molecules doped to E8 were used as LC component to prepare polymer dispersed liquid crystal (PDLC) films. The mass fraction of the LC mixture is fixed 50.0 wt%. Results indicate that doping 8.0 wt% fluorinated LC molecule ME3CP to E8 significantly reduced the driving voltage of the PDLC films, and the driving voltage reduced with the rise of mass fraction of ME3CP. Besides, the terminal flexible chain length of the fluorinated LC molecule influenced the LC mixture properties based on E8, such as the dielectric anisotropy, birefringence and viscosity of the LC mixture, and the morphology and the electro-optical properties of PDLC films were controlled not only by the physical properties of the LC mixture, but also by the terminal flexible chain length of the fluorinated LC molecule .     

环氧基PDLC的制备及其电光性质

PDLC是一种新型的固态显示器件,具有优良的光电响应性能。我们以环氧交联法制备PDLC膜,考察了不同固化条件、浓度配比对PDLC膜形态结构的影响,讨论了凝胶点和分相机理的关系,进而测量了PDLC膜的光电响应,并对其响应过程提出了新的看法。     

Effects of monomer structure on the morphology of polymer networks and the electro-optical properties of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared by photochemical polymerisation with a series of (meth)acrylate monomers. The effects of monomer structure on the morphology of polymer networks in the PDLC films were studied. The acrylate monomers without sidegroup chain formed uniform polymer networks. The methacrylate monomers with methyl as their sidegroup chains formed lace-like networks. The size of the LC droplets increased with increasing the length of the flexible chain of both methacrylate and acrylate monomers. Meanwhile, the effects of the morphology of the polymer network on the electro-optical properties of PDLC films were also investigated.     

Study on the electro-optical properties of polyimide-based polymer-dispersed liquid crystal films

The reflectivity control device, initially developed for attitude control, is utilised to control the solar sail orbit by switching the states between absorption and specular reflection. Actually, the major parts of the device are the polymer-dispersed liquid crystal (PDLC) films. Here, PDLC films based on polyimide (PI) as polymer matrix and a low molecular weight LC can be prepared by the thermally induced phase separation (TIPS) method. The influences of cooling rate and the content of LC on the size and uniformity of LC droplets dispersed in a polymer matrix by a TIPS process were investigated. It was found that a fast cooling rate gave smaller droplet sizes and hence a more uniform distribution as compared to the ones produced under a slow cooling rate. If the LC content was increased, the droplet size would be increased. Furthermore, the effect of LC droplet size on the electro-optical properties of the PI-based PDLC films was discussed, such as transmittance, threshold voltage, driving voltage and contrast ratio (CR).     

聚合物分散液晶(PDLC)材料的光聚合反应

以Ar+激光器为光源, 采用虎红、 N-苯基甘氨酸、二季戊四醇羟基五丙烯酸酯和乙烯基吡咯烷酮分别作为光引发剂、共引发剂、预聚物和稀释剂, 与液晶材料TEB30A结合, 通过光聚合反应, 制备了聚合物分散液晶(PDLC), 用紫外光谱和荧光光谱对其反应机理进行了分析. 实验结果表明, PDLC是通过光引发剂吸收光子能量后与共引发剂相互作用, 形成自由基中间体并引发聚合反应, 使预聚物与液晶产生相分离形成的.     

Studies on electro‐optical properties of polymer matrix/LC/ITO nanoparticles composites

In this paper, polymer‐dispersed liquid crystal (PDLC) films consisting of liquid crystal (LC)/monomers/indium tin oxide (ITO) nanoparticles with good near‐infrared absorption property had been fabricated, and the influence of the ITO nanoparticles modified with 3‐methacryloxypropyltrimethoxysilane (KH570) on the PDLC films was systematically studied. First, different liquid crystal content was studied to obtain PDLC films with good electro‐optical properties. And then, various weight ratio of ITO nanoparticles was added to samples. While the content of ITO nanoparticles was increased, the saturation voltage increased and the CR decreased. Though the electro‐optical properties of PDLC samples reduced with the addition ITO nanoparticles, the near‐infrared absorption property of films was enhanced.     

Effect of oligomeric surface modifying agent on electro-optical properties of polymer dispersed liquid crystal

In order to lower the driving voltage of polymer dispersed liquid crystal (PDLC), an oligomeric surface modifying agent (SMA) which is a fluoroalkyl terminated polyurethane (PU) oligomer has been synthesized and added to polyurethane acrylate (PUA) resin. With the addition of SMA, contact angle of the resin surface with an LC drop increased and domain size decreased significantly due to the enrichment of SMA molecules at the surfaces. Operating voltage decreased up to 5 phr SMA and increased beyond this content. Regarding the effect of SMA molecular weight, lower molecular weight drove the shutter at lower operating voltage, indicative of more enrichment of the SMA molecules at the surfaces.     

Modification of electro-optical properties of polymer dispersed liquid crystal films by iniferter polymerization

In this letter, iniferter polymerization was employed to prepare polymer dispersed liquid crystal (PDLC) films. Polystyrene (PS) was prepared as a macro-iniferter (MI). With the addition of MI in PDLC films, poly(methyl acrylate)-b-polystyrene was prepared in situ and used as polymer matrix in photopolymerization induced phase separation (PIPS). A reduction in driving voltages and an improvement in the ON state transmittance were observed for the sample prepared with a small amount of MI; while a poor electro-optical performance was obtained for that without any MI. Moreover, molecular weight and refractive index of the polymer matrix could be easily adjusted by the concentration of MI, and the matrix seems to be a prospective material for the PDLC devices.     

The effect of the resultant microphase-separated structures of polymer matrices on the electro-optical properties of polymer dispersed liquid crystal films by Iniferter polymerization

Iniferter polymerization was employed to prepare polymer dispersed liquid crystal (PDLC) films and an additional photoinitiator was introduced to induce the phase separation of polymer matrices themselves on the process of preparing the PDLC. The effect of the polymerization kinetics and the resultant microphase-separated structures of polymer matrices on the electro-optical properties of PDLC films were studied. It was found that the bigger length scale of phase separation of polymer matrices induced strong light-scattering resulting in low ON-state transmittance. And faster polymerization kinetic induced higher threshold and saturation voltages.     

The surface rubbing effect on morphologies of LC droplets and electro-optic properties of flexible PDLC films

The flexible polymer dispersed liquid crystal (PDLC) film with threshold voltage V ₁₀ and saturation driving voltage V ₉₀ as low as 0.34 V/μm and 0.77 V/μm, respectively, has been prepared successfully by polymerization induced phase separation (PIPS). The surface rubbing effect on morphologies of liquid crystals (LC) droplets and electro-optic properties of PDLC films has been studied experimentally and theoretically. We use a CVC (Color Video Camera) and a SEM (Scan Electron Microscope) to detect and characterize morphologies of LC droplets in the net of polymer. The result reveals that almost all the smaller LC droplets exhibit in the rubbing direction uniformly, and the texture of PDLC is similar to that of H-PDLC. Meanwhile, compared with the sample of the non-rubbing disposal, the response time declines evidently by 11.2 ms (i.e., the rising time τ_rise) and 27.2 ms (i.e., the decaying time τ_down), and the contrast ratio is improved from 18.5 to 35.9. Such a result can be attributed to the surface rubbing effect.     

Effects of crosslinking agent,cure temperature,and UV flux on the electro‐optical properties of polymer‐dispersed liquid crystal cells

We present results for the effects of a crosslinking agent, cure temperature, and UV flux on the electro‐optical properties of polymer‐dispersed liquid crystal (PDLC) cells. These cells were fabricated using a mixture of a liquid crystal (E8) and an acrylic monomer (CN135). The maximum in the first derivative of the transmission vs. applied, sinusoidal voltage (inflection voltage, V_inf), varies systematically with PDLC formulation and cure‐process conditions. For PDLC cells fabricated with a crosslinking agent (SR295), V_inf increases with increasing the concentration of SR295. However, for cells fabricated without the use of a crosslinking agent, V_inf decreases with increasing the UV flux and decreasing temperature. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 404–410, 2004     

The fabrication of novel optical diffusers based on UV-cured polymer dispersed liquid crystals

Polymer dispersed liquid crystals (PDLCs) with different sizes of the LC droplets are prepared based on the ultraviolet (UV) light curable acrylate monomers/LCs composites to fabricate the optical diffuser films. To acquire light diffusers with high optical performance, the effects of the monomer structure and the UV light intensity on the micro-structure of the PDLC films are studied. Results show that the PDLC films could exhibit a strong light scattering at the premise of maintaining high transmittance in the visible region. As the LC droplets are spherically dispersed in the polymer networks, when the size of LC droplets is about 3.0 μm, the haze can reach 88.5% and the transmittance is nearly 90.0%, which can be used as a bottom diffuser film. While when the size of LC droplets is about 10.0 μm, the haze and transmittance are 39.2% and 90.2%, respectively; hence, it can be a good choice for a top diffuser film. With the advantages of simple preparation, roll-to-roll industrial production and tunable optical properties, it is supported that the films based on UV-cured PDLC films can be applied as outstanding optical diffuser films in the liquid crystal display industry.     

Effects of chemical structure and composition of the polymer matrix on the morphology and electro-optical performance of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) systems on the basis of nematic liquid crystal E7 and amphiphilic binary copolymers of acrylic acid (AA) with such acrylates as 2-ethylhexyl acrylate (EHA), n-butyl acrylate (BA), and methyl acrylate (MA) are investigated. It is shown that the liquid crystal (LC) drops in the copolymer EHA–AA have submicrometre sizes, and their dependence on the composition of the photo-curable monomer mixture is described by a parabolic curve. The highly oriented domain structure in the same system is first revealed when electric field is applied. The threshold voltage for all systems begins to increase with some critical composition of a monomer mixture in which the longer the hydrocarbonic radical in an acrylate molecule, the higher the content of AA. The PDLC system based on the BA–AA copolymer with 30 wt% LC exhibits the least value of the driving voltage, 1 V μm^–1, and the lowest memory effect.     

Preparation and electro‐optical properties of polymer dispersed liquid crystal films with relatively low liquid crystal content

In this paper, polymer dispersed liquid crystals (PDLC) films with LC content as low as 40 wt% were prepared, and the electro‐optical properties were carefully investigated. To accomplish this, different (meth)acrylate copolymerizaiton monomers have been used. The electro‐optical properties and morphologies of the PDLC films were strongly influenced by the chemical structure of copolymerization monomers (hydroxypropyl methacrylate (HPMA), glycidyl methacrylate, hydroxypropyl acrylate) and their feed ratio. Lower driven voltage and higher contrast ratio were achieved when the PDLC films showed a morphology with suitably LC domain size. At high HPMA content, a thin polymer film was formed on the surface of PDLC samples, which is beneficial to decrease the total LC content in PDLC devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Cyano terminated tolane compounds for polymer dispersed liquid crystal application: relationship between cyano terminated tolane based molecular structures and electro-optical properties

ABSTRACT

The structures of the liquid crystal (LC) molecules have a key role in impacting the electro-optical performance of a polymer dispersed liquid crystal (PDLC) film. In this paper, the relationship between the LC molecular structures and the electro-optical properties of PDLC films is investigated based on an unexplored cyano-terminated tolane compounds (CTTCs) doped E8 LCs/UV polymers system. Due to the high polarity of CTTCs, LCs doped with the cyano-terminated tolane (CTT) molecules exhibit high birefringence and large positive dielectric anisotropy. On the whole, PDLC films doped with the CTT molecules exhibit a lower driving voltage than that doped with the pure E8. More excitingly, PDLC films based on CTT molecules with larger length-to-width ratio and longer conjugated system show higher contrast ratio (CR) and faster response time. Eventually, the mechanism of the effects of CTT-based molecular structures and the relationship between the electro-optical performance of PDLC films and CTT molecules are illustrated. This work paves a new way for optimising the electro-optical properties of PDLC films.     

Novel techniques of PDLC film preparation furnishing manifold properties in a single device

Three novel techniques of polymer dispersed liquid crystal (PDLC) film preparation have been proposed to obtain/induce systematically varying manifold properties in a single device. These three techniques were used to prepare ‘wedge-shaped’, ‘multi-channelled’ and ‘grating type’ PDLC films. Arrangement and configuration of liquid crystal (LC) microstructures inside these PDLC films, which were conveniently divided into different zones, have been investigated using a polarising optical microscope (POM) and scanning electron microscope (SEM). POM images indicate a predominant bipolar structure in all zones of different types of PDLC films but with varying size and density. Further, the electro-optical (EO) properties of PDLC films for different zones have different morphological characteristics as indicated (observed) in POM and SEM images and were dependent on LC droplet shape, size and distribution. Also different zones show different absorbance/transmittance characteristics in the visible range. Thus, our study proposes a single device with manifold properties. Also, the desired properties can be obtained by selecting the suitable zone from the PDLC composite film.