In situ self-assembled homeotropic alignment layer for fast-switching liquid crystal devices

We propose a novel method for homeotropic alignment of liquid crystals (LCs) utilising in situ self-assembly of a low concentration of 4-(4-heptylphenyl)benzoic acids that form hydrogen bond with the indium tin oxide (ITO) substrates. Stable homeotropic alignment in the LC device is achieved with a simple mixing process of benzoic acid derivative in LC media, and it yields electro-optical performance similar to that achieved with the conventional alignment method using polyimides. It is experimentally confirmed that an ultrathin self-assembled molecular layer of 4-(4-heptylphenyl)benzoic acid formed by hydrogen bonding on ITO substrate makes it possible to attain a reliable homeotropic alignment of LCs. Furthermore, this simple approach provides a cost-effective and stable LC alignment layer with fast response time and thermal stability.     

Self-assembled discotic nematic liquid crystals formed by simple hydrogen bonding between phenol and pyridine moieties

New discotic nematic liquid crystals have been prepared through intermolecular hydrogen bonding between the core of 1,3,5-trihydroxybenzene (phloroglucinol, PG) or 1,3,5-tris(4-hydroxyphenyl)benzene (THPB) and the peripheral molecules of stilbazole derivatives. The various nematic phases formed by new hydrogen bonding building blocks were investigated by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. The first discotic complexes of PG and trans-4-alkoxy-4′-stilbazoles exhibited nematic columnar (N_C) and hexagonal columnar phases depending on the length of alkyl chains, which were considered as the basic discotic structure. Several structural variations on the building blocks were attempted to examine their effects on the liquid crystalline properties of discotic complexes. The nematic lateral phase (N_L) with enhanced intercolumnar order was observed for the complexes of PG and trans-4-cyanoalkoxy-4′ stilbazoles due probably to the strong dipole interactions between cyano groups at the end of alkoxy chains. By introducing the nonlinear structure in three arms of supramolecular discotic mesogen, a discotic nematic phase (N_D) was observed for the complex of THPB and trans-4-octyloxy-4 -stilbazole. The single hydrogen bonding between phenol and pyridine moieties in this study provides a simple and effective method for preparing the rarely found discotic nematic liquid crystals.     

Enlargement of blue-phase stability for rod-like low-molecular-weight chiral nematic liquid crystal mixtures

In this study, we investigated the enlargement of liquid crystal (LC) blue-phase (BP) temperature range using the rod-like low-molecular-weight cyano phenyl-type chiral nematic LC with various core group and chiral dopant concentrations. Also, the electro-optic response time was investigated for them. We found that the BP temperature range was strongly dependent upon the core structure and the chiral dopant concentration for the chiral nematic LC mixtures having the same terminal group. Also, we found a stable BP with a wide temperature range (more than 6 K), including a BP-isotropic coexistence state over 13.5 K upon heating and cooling processes and very fast response time (less than 1 ms), by using the cyano phenyl-type chiral nematic LC mixture with a high molecular aspect ratio and a high chiral dopant concentration.     

Synthesis and characterization of novel epoxy monomers and liquid crystal thermosets

Four new epoxy monomers have been synthesized and characterized as part of a program to prepare novel liquid crystal thermoset (LCT) materials. Three of the new epoxy monomers contained a biphenyl mesogen and were not liquid crystalline (LC). The remaining epoxy monomer, which contained a 1,4-dibenzoyloxybenzene mesogen, was synthesized in an overall yield of 30% and displayed a broad (83°C) nematic liquid crystalline phase. The new liquid crystalline epoxy monomer was cured at 120°C and postcured at 175°C with a stoichiometric amount of 1,4-phenylenediamine. The thermal transitions of the resulting LCT were studied by differential scanning calorimetry (DSC), polarized light optical microscopy (POM), thermomechanical analysis (TMA), and wide angle x-ray diffraction (WAXD) as a function of cure time and temperature. A process characterization diagram was constructed which shows that LCTs based on this new LC monomer can be processed in the liquid crystalline phase over a broad range of times and temperatures. Qualitative agreement with previous epoxy LCT results was found, as LCT's with smectic phases and without clearing temperatures were observed at long cure times (high crosslink densities), whereas nematic phases with clearing temperatures predominated in networks at short cure times (low crosslink densities). © 1993 John Wiley & Sons, Inc.     

Smectic liquid crystal alignment using mechanically rubbed n-octadecylsiloxane self-assembled monolayers

In recent years a variety of techniques has appeared for the fabrication and manipulation of self-assembled monolayers (SAMs). This development now offers new tools for the study and control at the molecular level of the interaction of liquid crystals (LCs) with solid surfaces, a research area of great importance for liquid crystal applications. In this paper we show that mechanically rubbed octadecylsiloxane SAMs generate a novel surface alignment of LCs in which the in-plane surface anisotropy usually accompanying rubbing is operative, but only for smectics in which the mean molecular long axis, [ncirc], is tilted from the layer normal. On our SAMs smectic phases align with the layers parallel to the SAM surface, and in tilted smectics the surface component of [ncirc] is along the rubbing direction. This anisotropy is absent in the nematic phases which align with [ncirc] strictly normal to the surface. This behaviour can be understood in terms of a rubbed SAM monolayer surface, which is low energy, molecularly smooth, and rendered anisotropic by the rubbing. UV irradiation of rubbed SAMs gave excellent planar alignment ([ncirc] parallel to the surface). This type of control over LC alignment has not been previously reported.     

Synthesis and properties of reactive liquid crystal monomers and side-chain liquid crystalline polymers

Two nematic liquid crystal (LC) monomers containing double bonds in the side chain were designed and synthesised. Length of the side groups varied from 1 to 2 methylene units. The side-chain polymers were synthesised by hydrosilylation reaction. The molecular structures of the intermediates and the LC monomers were characterised by Fourier transform infrared, elemental analysis and nuclear magnetic resonance spectroscopy. The thermal phase behaviour of the monomers and polymers were investigated by differential scanning calorimetry and polar optical microscopy coupled with hot stage. The LC monomers showed only one nematic mesophase in the cooling process. And, the two polymers exhibit an enantiotroppic nematic mesophase either in the heating or in the cooling process.     

Ferroelectric polymer nanocomposite alignment layer in twisted nematic liquid crystal devices for reducing switching voltage

Twisted nematic liquid crystal device (TNLCD) was fabricated using a ferroelectric zinc oxide (ZnO)-doped polyimide alignment layer. The ferroelectric nanoparticle can produce a local electric field, which can trigger the orientation of liquid crystal molecule and reduces the switching voltage. The uniform dispersion of ferroelectric ZnO nanoparticles in the alignment layer was studied using field emission scanning electron microscopy and atomic force microscopy. The ferroelectric property of ZnO-doped polyimide was investigated using dynamic contact electrostatic force microscopy. An increased local electric field due to the presence of nano ZnO was confirmed with the help of scanning tunnelling microscopy. An augmentation of capacitance was observed with an increase in concentration, which substantiates the reduction of switching voltage of TNLCD with the modification of ferroelectric nanoparticle-doped alignment layer.     

The mechanical and magnetic alignment of liquid crystalline epoxy thermosets

The processing of a new series of liquid crystalline (LC) epoxy networks was evaluated. Above the glass transition temperature, the low crosslink density networks could be mechanically aligned. The mechanically oriented networks readily lost orientation upon heating. Highly anisotropic liquid crystalline (LC) epoxy networks were also prepared by aligning the mesophase of the prepolymer during the curing process under the influence of a magnetic field. Orientation parameters (f) of 0.13 to 0.57 were achieved by these processes as determined by x-ray diffraction analysis. The ability of the magnetically aligned networks to retain their orientation above the glass transition temperature was determined by time-resolved x-ray diffraction. The stability of the alignment of these networks was found to depend on crosslink density. The effect of the anisotropy of these networks was investigated by measuring the coefficient of thermal expansion (CTE). In the aligned networks, there was a substantial reduction in CTE parallel to the direction of the applied field compared to the randomly oriented networks. © 1992 John Wiley & Sons, Inc.     

Dynamic simulation of Pi-cell liquid crystal displays

The dynamics of π-cell liquid crystal displays was studied by detailed computer simulation. The time evolution of the director configuration and the velocity of flow reveals the mechanism of the fast response of π-cells. The effect of pretilt angle on the dynamics of π-cells was also studied.     

Nitro substitution in achiral calamitic liquid crystals

This review examines in some detail the effect of terminal and lateral nitro substitutions in achiral calamitic liquid crystals on their physico-chemical properties. The results of this study are compared with those obtained for other groups, and are rationalized in terms of existing theories.     

氢键缔合主链超分子液晶聚合物:间隔基及扩展介晶元长度的影响研究

采用慢挥发溶剂组装方法制备了一系列羧酸/吡啶氢键缔合的主链型超分子复合物,并采用FTIR,DSC以及偏光显微镜等对其相转变与热致液晶相行为进行了比较研究.研究表明,分别具有较短的6或10个亚甲基的烷烃间隔基的双苯甲酸衍生物4',4'-二羧酸-1,6-二酚氧基己烷(C6-2COOH)和4',4'-二羧酸-1,10-二酚氧基癸烷(C10-2COOH)的系列复合物具有较高的熔点和清亮点,一般都只出现结晶近晶相和多晶型转变现象.而具有柔顺性较好的四甘醇醚链间隔基的4,4'-二羧酸-α,ω-二酚氧基四甘醇醚(C8O4-2COOH)得到的系列复合物均在降温过程生成单致的流体近晶SA和/或向列N液晶相.可见,间隔基增长,相转变温度降低,最终导致真正的流体液晶相的产生.另一方面,对于从同一种二元羧酸得到的组装体系,从4,4'-联吡啶(4,4'-BPy)、4,4'-联吡啶乙烯撑(4,4'-BPyE)到对苯二酚二异烟酸酯(p-PhBPy),由于双键或酯基的引入,可变形性和极性增大,刚性依次减弱,尽管中心核部分持续长度增大,所得复合物的各向同性化温度降低,形成流体液晶相的趋势增强,液晶有序性降低,流动性增加.指出了早期文献报道的一些不一致甚至矛盾的结果.通过不同系列的对比研究,得出的一些规律性对氢键组装尤其对羧基/吡啶氢键缔合超分子体系设计与构筑具有一定指导意义.     

Thermal tuning band gap in cholesteric liquid crystals

The phase of a liquid crystal (LC) changing from a nematic phase to a cholesteric (Ch) mesophase is achieved by adding different ratios of chiral dopants S811. By studying the transmission spectrum, we are able to measure the helical pitch in cholesteric phase. The pitch in the mixtures of nematic E7 and chiral dopants S811 as a function of the concentration of the dopant and temperature is investigated. The sensitivity of the selective reflection notch of the cholesteric phase to the thermal tuning depends strongly on the ratios of the chiral dopants. It reveals that the influence of temperature is more profound for those cholesteric liquid crystals (CLCs) which exhibit smectic A (SmA) at lower temperatures. When fitted using Keating's formula, the helical pitch calculated from our experimental results lies on the predicted curve. Optimised ratios of the mixture CLCs for the optimised reflection band with the specified wavelength ranging from 467 nm to 2123 nm are suggested.     

Effect of anti-parallel and twisted alignment techniques on various propertiesof polymer stabilised liquid crystal (PSLC) films

Thin composite films consisting of liquid crystal (LC) domains surrounded by polymer networks, termed as polymer stabilised liquid crystals (PSLCs), were prepared by photo-polymerisation of a pre-polymer dissolved in LC. Four composite films were prepared with different rubbing directions and with and without electric field during photo-polymerisation. Morphological characterisation carried our using a polarising optical microscope (POM) and a scanning electron microscope (SEM) reveal significant changes in LC domain morphology and associated polymer networks with the application of electric field during the fabrication of the films. The electro-optic (EO) properties of PSLC films placed between two crossed polarisers were studied using a He–Ne laser under an action of externally applied electric field. It was found that the PSLC film with twisted alignment and polymerised in the presence of electric field showed better EO properties than other films. Transmittance obtained by EO studies was verified with absorbance studies using a Ultraviolet-Visible spectrophotometer. The dielectric behaviour of PSLC films in the frequency range 20–20 MHz was investigated using a precision impedance analyser. The obtained data were modelled using Debye and Cole–Cole methods to calculate relaxation time and distribution parameter. The relaxation time calculated through the Cole–Cole model is in agreement with response time.     

Crystallisation of nematic liquid crystal mixtures

In this paper, we propose a method to accelerate the crystallisation of nematic liquid crystal mixtures based on crystallisation theory. This method is to hold a nematic liquid crystal sample at a temperature suitable for crystal growth after aging it at a temperature suitable for nucleation. After we specified these temperatures of a nematic liquid crystal mixture using differential scanning calorimetry, we demonstrate that the two-temperature aging method is effective for the crystallisation of other nematic liquid crystal mixtures in which the crystal-liquid crystal transition temperature has so far been undetectable.     

Flexible taper-shaped liquid crystal trimer exhibiting a modulated smectic phase

We prepared some taper-shaped liquid-crystalline trimers in which two phenylpyrimidine units and a 1,4-diphenyl-2,3-difluorobenzene unit are connected to 2,4-dihdroxy benzoic acid via flexible spacers. We then investigated their liquid-crystalline properties using polarised optical microscopy, differential scanning microscopy and X-ray diffraction. 6-[4–(5-Octylpyrimidin-2-yl)phenyloxy]hexyl 2-{7-{4-[4–(4-hexylphenyl)-2,3-difluorophenyl]phenyloxy}heptanoyloxy}-4-{6-[4–(5-octylpyrimidin-2-yl)phenyloxy]hexyloxy}benzoate (1) was found to exhibit a phase sequence of isotropic liquid – nematic – intercalated smectic A – intercalated anticlinic smectic C – modulated smectic C. The structure–property relation in the taper-shaped trimers reveals that the modulated phase is induced by competition between an intercalated structure stabilised by dipole–dipole interaction and a monolayer structure by packing entropy effects. Conformational change of compound 1 induced by intermolecular interactions plays an important role in the phase transition behaviour.     

Non-symmetric chiral nematic liquid crystal dimers containing trifluoromethyl and 1,2-propanediol

ABSTRACT

A series of non-symmetric liquid crystal (LC) dimers with the same chiral core 1,2-propanediol (PD) have been synthesised, termed as ABBA-PD-TFBA, PBBA-PD-TFBA, ABA-PD-TFBA, PBA-PD-TFBA and AA-PD-TFBA, respectively, in which one of the two mesogenic groups, the fluorinated mesogenic unit, was kept fix and the other arm was different. The intermediate compounds and LC dimers were characterised by FTIR, ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, polarised optical microscopy and X-ray diffractometer (XRD). The results of the measurements indicated that ABBA-PD-TFBA, PBBA-PD-TFBA and ABA-PD-TFBA displayed optical activity and enantiotropic chiral nematic phase, and PBA-PD-TFBA was an enantiotropic nematic LC while AA-PD-TFBA was a monotropic LC, displaying both nematic phase and smectic A phase on cooling. The results indicated that PD was able to induce the chiral nematic phase, nevertheless, the rigidity of the mesogenic arm, the flexibility of the terminal group and even the type of the terminal chemical bond played an important effect on the thermal properties of the dimers, and even on the formation of the chiral nematic phase. It is also worth noting that C=C at the terminal helped to stabilise the LC phase.     

Dispersion and orientation of single-walled carbon nanotubes in a chromonic liquid crystal

A post-synthesis alignment of individual single-walled carbon nanotubes (SWCNTs) is desirable for translating their unique anisotropic properties to a macroscopic scale. Here, we demonstrate excellent dispersion, orientation and concomitant-polarised photoluminescence of SWCNTs in a nematic chromonic liquid crystal. The methods to obtain stable suspension are described, and order parameters of the liquid crystal matrix and of the nanotubes are measured independently.     

New symmetric azobenzene molecules of varied central cores: Synthesis and characterisation for liquid crystalline properties

A new series of azobenezene liquid crystals (LCs) was designed and synthesised by known and straightforward methods. The central connecting cores of the molecules varied viz., benzene/naphthalene/biphenyl. The molecular structures were confirmed by infrared, UV, nuclear magnetic resonance spectroscopic techniques. The LC texture and thermal phase behaviours were investigated by polarising optical microscopy and differential scanning calorimetry. Smectic B phase was found in biphenyl-derived azobenzene ester. The effect of central core on LC properties was investigated. The decreased angle at central connecting core suppressed the melting points, phase transition temperatures without losing LC properties, whereas, in moderate angle compounds LC properties were suppressed. The compounds with increased angle at central core favours rich mesomorphism.     

Light-controlled reorientation of nematic liquid crystal driven by an electric field

The joint influence of optical and (quasi-)static electric fields on the orientation of liquid crystal gives rise to peculiar effects. In this article we report on the generation of transient domains in liquid crystals, which are an order of magnitude larger than the size of the optical field profile. The formation of such a domain is due to the fact that the initially present optical field reverses the pre-tilt, and the voltage that is then applied gives rise to an amplification of the tilt angle. The resulting reorientation of the director strongly depends on the starting conditions of the preliminary present optical field. We demonstrate different switching conditions, depending on the relation between the incident angle of the beam and the pre-tilt angle. The resulting refractive index profiles give rise to lensing effects.     

Coexistence of nematic and chiral nematic phases of an achiral liquid crystal trimer possessing an octafluorobiphenyl unit

We prepared some achiral flexible liquid crystal oligomers possessing an octafluorobiphenyl unit and investigated their phase transition properties using polarising optical microscopy and differential scanning calorimetry. All the compounds showed nematic phases. The trimer with even-numbered spacers was found to exhibit coexistence of the nematic regions and the chiral nematic regions with opposite twist senses of a sample contained in a homogeneous aligned cell during a cooling process, whilst that with odd-numbered spacers did not. We discuss how the even-numbered trimer produces the helical state.