Diffusion-controlled reaction. VI. Radiation graft polymerization of styrene to polyethylene

The radiation graft polymerization of styrene to polyethylene was studied under diffusion-controlled conditions of radiation intensity I, monomer concentration M₁, and polymer sample thickness L. The results of the present study together with previous work under diffusion-free conditions verify our theoretical model for the diffusion-controlled reaction. The grafting rate is inverse first order in L for diffusion-controlled reaction and independent of L for diffusion-free reaction. The order of dependence of grafting rate on radiation intensity for diffusion-controlled reaction is one-half that for diffusion-free reaction. Diffusion control leads to a decrease in the order of dependence of grafting rate on monomer concentration. The decrease is greater than theoretically predicted; possible reasons for this effect are described.     

Diffusion-controlled reaction. VI. Radiation graft polymerization of 4-vinylpyridine to polyethylene

The radiation-initiated graft polymerization of 4-vinylpyridine to high-density polyethylene was studied over a wide range of reaction conditions of radiation intensity I, monomer concentration M₁, and polymer film thickness L. The conditions included both diffusion-free and diffusion-controlled graft polymerizations. The results corroborate our previous theoretical predictions on the effect of I, M₁, and L on the experimental grafting rate. The grafting rate is inverse first order in L for diffusion-controlled reaction and independent of L for diffusion-free reaction. The dependence of grafting rate on radiation intensity decreases from 1/2 to 1/4 order for diffusion-controlled reaction. Diffusion control results in a decrease in the dependence of rate on monomer concentration. The observed decrease is somewhat greater than theoretically predicted.     

Light scattering from polymer films having optically anisotropic rodlike texture. A quantitative test of theories

The light scattering intensity distribution from rodlike crystalline superstructures is quantitatively investigated theoretically and experimentally. The arithmetic average of theoretical H_v scattered intensities at azimuthal angle μ = 0° and μ = 45° is shown to decrease with increasing scattering angle θ in proportion to W^?1 at high scattering angles for a system composed of a random assembly of rodlike superstructure having very small lateral dimensions relative to the length. The quantity W is defined as 2π(L/λ) sin θ where L is the length of the rod, and λ is the wavelength of light in the medium. A method is proposed to estimate the length L by using the W^?1 dependence. Effects of internal heterogenity, polydispersity in rod length, and finite lateral dimensions of the rodlike superstructure are considered to account for experimental deviation of the scattered intensity distributions from the W^?1 dependence. The effect of finite lateral dimensions turns out to be the most important.     

Preparation of benzoylchitosans and their chiroptical properties in dilute solutions

Two benzoyl substituted chitosan derivatives, 3,6‐O‐dibenzoylchitosan (DBC) and 2‐N‐3,6‐O‐tribenzoylchitosan (TBC), were prepared, and their optical activities in organic solvent were investigated by circular dichroism (CD). For TBC, two splitting bands (a negative one at 288 nm and a positive one at 274 nm) corresponding to the ¹L_b transition of the benzoyl group were observed in chloroform and dichloromethane, while only a negative CD band was recorded in N, N‐dimethylformamide (DMF). These results indicated that the transition moments of benzoyl groups were orderly arranged along the helical polymer chain when TBC was dissolved in a solvent with low polarity, but the same ordered structure did not appear in a polar solvent of DMF. For DBC, only negative CD signals corresponding to the ¹L_b transition of the benzoyl group were observed, regardless of the solvent property, which indicated that the chromophores were not arranged in an ordered fashion with appropriate geometry to interact with one another to induce bi‐signate CD signals. Adding methanol or DMF to the solution of TBC/chloroform resulted in a progressive decrease of the intensity of the positive split band at 274 nm. The intensity of the positive band was weakened upon heating a solution of TBC/chloroform from 20 to 60 °C. The results suggested that the ordered arrangement of the chromophores in the TBC system was dependent on solvent and sensitive to temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4107–4115, 2004     

Studies of molecular aggregation of a polybenzimidazole in solution by fluorescence spectroscopy

A purified, well characterized sample of polybenzimidazole (PBI) has been studied by fluorescence spectroscopy in order to obtain information concerning molecular aggregation in solution. Fluorescence and excitation spectra of PBI and a model compound have been measured in N,N-dimethylacetamide (DMA) and in formic acid (FA). The major emission band for PBI solutions is attributed an excited ¹L_b state, which consists of 0-0 and 0-1 vibrational energy bands. Concentration quenching is attributed to reabsorption of the emitted light, and self-quenching due to the formation of molecular aggregates. Therefore, the extent of molecular aggregation in solution is estimated from the self-quenching constant. In the course of the investigation, a new fluorescence band was found for the PBI-DMA solution; its intensity increased markedly due to overlapping of polymer coils. The formation of polyelectrolytes in PBI-FA solutions was confirmed by viscometry. The major fluorescence band was found to originate from the excited ¹L_b state and to shift to longer wavelengths upon addition of lithium bromide.     

Knudsen effusion mass spectrometric determination of mixing thermodynamic data of liquid Ag–In–Sn alloy

The vaporisation of a liquid Ag–In–Sn system has been investigated at 1273–1473 K by Knudsen effusion mass spectrometry (KEMS) and the data fitted to a Redlich–Kister–Muggianu (RKM) sub-regular solution model. Nineteen different compositions have been examined at six fixed indium mole fractions, X_In = 0.10, 0.117, 0.20, 0.30, 0.40 and 0.50. The ternary L-parameters, the thermodynamic activities and the thermodynamic properties of mixing have been evaluated using standard KEMS procedures and from the measured ion intensity ratios of Ag⁺ to In⁺ and Ag⁺ to Sn⁺, using a mathematical regression technique described by us for the first time. The intermediate data obtained directly from the regression technique are the RKM ternary L-parameters. From the obtained ternary L-parameters the integral molar excess Gibbs free energy, the excess chemical potentials, the activity coefficients and the activities have been evaluated. Using the temperature dependence of the activities, the integral and partial molar excess enthalpies and entropies were determined. In addition, for comparison, for some compositions, also the Knudsen effusion isothermal evaporation method (IEM) and the Gibbs–Duhem ion intensity ratio method (GD-IIR) were used to determine activities and good agreement was obtained with the data obtained from fitting to the RKM model.     

Determination of tacticity in poly(vinyl chloride) by infrared spectroscopy

From the temperature dependence of infrared spectra of poly(vinyl chloride) samples prepared by different methods, the intensity of the band at 690 cm.¹ (proportional to the number of isotactic diads in the sample), as well as that of the tacticity-independent C? H stretching band, was found to be independent of the crystallinity of the sample. These lines were therefore applied for the tacticity determination in poly(vinyl chloride), measured in the form of KBr pellets. The numerical tacticity value was obtained from the known values of absorbance coefficients of SCH and SHH type C? Cl stretching bands in solution, and from the shape of the spectrum.     

A study of the temperature effect on the IR spectra of crystalline amino acids,dipeptids, and polyamino acids. VI. <Emphasis Type="Italic">L</Emphasis>-alanine and <Emphasis Type="Italic">DL</Emphasis>-alanine

The results of IR and single crystal X-ray diffraction studies on the dynamics of molecular groups and structural changes in L-alanine and DL-alanine (NH₃⁺-CH(CH₃)-COO⁻) with temperature variation are given. An analysis of changes in the 4000–600 cm⁻¹ frequency range of the IR spectra with temperature variation reveals the occurrence of the anomaly for the ∼974 cm⁻¹ band in DL-alanine, which is similar to the anomaly for the 955 cm-1 band, previously described for L-alanine. The X-ray diffraction data for L and DL-alanine show that no dramatic changes in the unit cell parameters, conformations of amino acid molecules themselves, and hydrogen bond lengths occur with temperature variation, which would indicate the structural phase transition. Changes in the IR spectra of L-alanine and DL-alanine with temperature variation are compared to the changes in the vibrational spectra of other amino acids on cooling.     

Chemical effects on valence→L emissions of lanthanide compounds

Ce Lβ emission spectra of CeF₃ and CeO₂ have been measured with energy resolution of ~ 3 eV by a wave-dispersive spectrometer. The observed Ce Lβ₇ band shows certain difference between the two compounds both in profile and intensity. The chemical effects can be reproduced by a band calculation using WIEN2k, which suggests that the Ce Lβ₇ reflects valence-band structure of compounds, and therefore, is hopeful as a probe of selective X-ray absorption fine structure.     

Analytical application of x-ray radiation induced by radioactive isotopes,I

The dependence of the intensity of the bremsstrahlung and the characteristic X-radiation induced by a beta-emitting¹⁴C-isotope was investigated as a function of the layer thickness and the atomic number of the absorbent. The theoretically calculated and measured values of layer thickness required for maximum radiation intensity were in good agreement. The atomic number values required for maximum bremsstrahlung and characteristic radiation were ascertained. The obtained extreme values were attributed to a resonance effect occurring by the interaction of β-particles with theK electrons of the absorbent.     

Diffusion control in radiation graft polymerization with varying dependence of rate on monomer concentration

The quantitative effect of diffusion control on the rate of radiation-initiated graft polymerization has been studied theoretically for systems in which the diffusion-free reaction may show various dependencies of rate on monomer concentration other than the usual first-order dependence. The study is also very general in that it can be applied to systems involving a variety of different modes of initiation and termination. Whether the grafting process is diffusion-free or diffusion-controlled has been analyzed in terms of the interaction of the initiation rate R_i, the propagation and termination rate constants k_p and k_t, the equilibrium solubility M of the monomer in the polymer, the polymer film thickness L, the diffusivity D of the monomer in the polymer, and the diffusion-free kinetic order of dependence v of the grafting rate on monomer concentration. The dependence of the grafting rate for both the diffusion-free and diffusion-controlled reactions on these parameters is expressed both by mathematical experssions and graphically. Diffusion control is shown to occur at a critical value of the parameter A which is proportional to L(k_pR_i^w/k_t^zD)^1/2M^(ε?1)/2 where w, z, and v have different values depending on the specific modes of initiation, propagation and termination in a particular grafting system. The grafting rate is shown to vary with the value of A according to specific mathematical expressions. In comparing diffusion-free to diffusion-controlled reaction, it is shown that the former is independent of L and D while the latter is directly dependent on L and inversely on D^1/2. Further, the change from diffusion-free to diffusion-controlled reaction involves a change in the dependence of rate on monomer from v-order to [(v ? 1)/2]-order. The nonsteady-state as well as the steady-state reaction rates have been analyzed.     

Synthesis and spectral characterization of dioxouranium (VI) complexes of salicylhydrazine and acetone salicylhydrazone

Dioxouranium(VI) complexes of the types UO₂LSO₄ and UO₂L₂SO₄ (where L=SH, ASH) have been prepared from reaction of uranyl sulphate with salicylhydrazine (SH) and acetone salicylhydrazone (ASH) and characterized by conventional chemical and physical measurements. Infrared and Raman spectra indicate thatmono- andbis-complexes contain six-and seven-coordinate uranium atom respectively with all the ligand atoms arranged in an equatorial plane around the linear uranyl group. The infrared spectra (4000-200 cm⁻¹) reveal that both SH and ASH act as neutral bidentate ligands coordinating through a carbonyl oxygen and primary amine/azomethine nitrogen atoms. The sulphato group coordinates to the uranyl ion as bidentate chelating ligand and terminal monodentate ligand in mono- and bis-complexes respectively.     

Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.     

Determination of L‐Cystine by a New Sensitive Cucurbit[7]uril/palmatine Probe

In the presence of cucurbit[7]uril (CB[7]), the CB[7] could react with palmatine, which served as a sensitive fluorescence probe, to form host‐guest stable complexes and the fluorescence intensity of the complexes was greatly enhanced. The fluorescence intensity decreased linearly with an increasing number of L‐cystine in the inclusion system. The experimental results show that there exists a competition between L‐cystine and palmatine for the CB[7] hydrophobic cavity and L‐cystine occupies the space of CB[7] cavity, leading palmatine molecules to be forced to reside in the aqueous environment. Based on the fluorescence quenching of the CB[7]/palmatine complexes resulting from complex formation between CB[7] and L‐cystine, a spectrofluorimetric method for the determination of L‐cystine in aqueous solution in the presence of CB[7] was developed. The linear relationship between the corresponding values of the fluorescence quenching ΔF and L‐cystine concentration was obtained in the range of 6.0 to 1.5×10³ ng·mL^?1, with a correlation coefficient (r) of 0.9996. The detection limit was 2.0 ng·mL^?1. The application of the present method to the determination of L‐cystine in tablets gave satisfactory results. This paper also discussed the mechanism of the fluorescence indicator probe.     

Die Elektronenzustände von Perimeter-π-Systemen. II. Das Elektronenspektrum des trans-15, 16-Dimethyl-dihydropyrens

The electronic spectrum and the polarisation of the transitions have been determined in the region from 15000 to 50000 cm^?1 for the 2-acetamino derivative of trans-15, 16-dimethyl-dihydropyrene, whose spectrum resembles closely that of the parent compound and its di-ethyl analogue. It is shown that the sequence of states is ¹L_b, ¹L_a, ¹B_b, ¹B_a, in agreement with theoretical predictions which were deduced from a configuration interaction model for the D_2h-π-perimeter of these systems. The influence of inductive and hyperconjugative effects on the band positions and the band intensities has been discussed.     

Fourier-transform infrared study of coextrusion-drawn poly(ethylene terephthalate)

The effects of initial morphology and extrusion temperature on the orientational anisotropy and conformational changes on coextrusion drawing of poly(ethylene terephthalate) (PET) have been determined by Fourier-transform polarized infrared spectroscopy. The samples were drawn from both amorphous and semicrystalline (50%) PET at 50 and 90°C. A strong influence of coextrusion drawing temperature was observed for overall chain orientation evaluated from the dichroic ratio of the 795-cm^?1 band for the samples prepared from the amorphous state: this dependence was less prominent in samples drawn from the semicrystalline state. Under the same drawing conditions, the dichroic ratio for the 973-cm^?1 trans band for samples prepared from the amorphous state was higher than from the semicrystalline state. Furthermore, in all samples, the relative intensity of this band was almost proportional to the degree of crystallinity. In all samples, the gauche content, evaluated from the 896-cm^?1 band, decreased with increasing draw ratio. However, the dichroic ratio of this band was near unity regardless of draw ratio, initial morphology, or extrusion temperature. From these results it is considered that all gauche units in the amorphous phase are almost isotropic in the extrusion-drawn samples with overall orientation arising largely from the crystalline chains possessing totally the trans conformation (973 cm^?1) in its content. In order to evaluate the deformation mechanism of the coextrusion drawing method, the relationship between the bulk and film surface orientation is also reported.     

Electrochemiluminescence of SDBS‐Ru(bpy)32+‐CPM System and Its Application

When the concentration of dodecyl benzene sulfonic acid sodium salt (SDBS) is 0.7 mmol·L^?1, the electrochemical and electrochemiluminescence (ECL) intensity of Ru(bpy)₃²⁺‐chlorpheniramine maleate (CPM) system at the Au electrode were studied. The results showed that compared with the absence of SDBS, enhancement of the ECL intensity was 14‐fold at Au electrode. Base on this, an ECL method was established for efficient and simple determination of CPM at Au electrode. Under the optimum experimental condition, the enhanced ECL intensities had good linear relationship with the concentration of CPM in the range of 1.0×10^?4–1.0×10^?7 mol·L^?1, and a linear regression equation was obtained as follows: I (counts)=48.805×10⁶c+394.03 (r=0.9975), the detection limit for CPM was 1.4×10^?8 mol·L^?1. The RSD for 5 times determinations of 1.0×10^?5 mol·L^?1 CPM was 3.2%. The results of recovery test were between 96.3%–102.5%, and the RSD of recovery test (n=5) was 2.7%. In addition, eleven kinds of tertiary amines‐Ru(bpy)₃²⁺ systems were investigated in the absence and presence of SDBS. The results showed that the enhancement of SDBS on ECL intensity of tertiary amines‐Ru(bpy)₃²⁺ systems was universal.     

Terminal group effects on the fluorescence spectra of Eu(III) nitrate complexes with a family of amide-based 1,10-phenanthroline derivatives

Four ligands 1,10-phenanthroline-5,6-bis(N,N-dibenzyl-1′-oxopropylamide) (L^a) 1,10-phenanthroline-5,6-bis(N-methyl-N-benzyl-1′-oxopropylamide) (L^b) 1,10-phenanthroline-5,6-bis(N-benzyl-1′-oxopropylamide) (L^c) and 1,10-phenanthroline-5,6-bis(N,N-diethyl-1′-oxopropylamide) (L^d), and their lanthanide(III) (La and Eu) complexes were synthesized. The complexes were characterized by elemental analysis, IR, fluorescence spectroscopy and conductivity. The lanthanide atoms are coordinated by O atoms from C=O, Ar–O –C and N atoms from phen With the difference of the ligands, the fluorescent intensities of the Eu(III) complexes vary regularly in the THF solution. Some factors that influence the fluorescent intensity were discussed.     

Stereochemical,biochemical and ligation behaviour of divalent platinum complexes of sulfur and nitrogen donor agents

Divalent Pt complexes of o-FC₆ H₄ C(H)NNC(SH)SCH₂ Ph(L¹H) and o-FC₆ H₄ C(Me)NNC(SH)SCH₂ Ph(L ²H) have been synthesized and characterized thoroughly by analytical data, conductance measurements, molecular weight determinations, magnetic measurements, i.r., electronic, ¹H-n.m.r. and ¹⁹F-n.m.r. spectral studies. The spectral data are consistent with a square planar geometry around Pt^IIin which the ligand acts as a neutral bidentate and monobasic bidentate ligand coordinating through nitrogen and sulfur atoms. Ligands and their metal complexes were tested against certain microorganisms to assess their antimicrobial properties and the results are indeed positive.