载钴沸石的酸性和催化性质 丙烯二聚和芳构化作用

近年来对在ZSM-5沸石上烃类转化的研究表明,ZSM-5沸石具有较好的催化低磷烷烯烃芳构化活性.当引入变价金属阳离子(如Zn,Ga)后,芳烃选择性明显提高.关于引入金属钴离子对低聚和芳构化的影响,迄今尚未见报导.为此,本文着重探讨了用浸渍法制备钴改性ZSM-5沸石的酸性、丙烯二聚和芳构化反应活性及活性中心.     

汽油芳构化降烯烃ZSM-5型催化剂的研究

通过催化剂表征和小型固定床反应发现，减小沸石晶粒度和提高沸石表面L酸B酸比值，或者适当采用高氢油比，可以提高ZSM-5沸石在汽油芳构化降烯烃反应中的活性稳定性．而适当提高反应温度及减小汽油进料空速则可以提高汽油中烯烃的芳构化程度．连续300h的小试运转表明，FCC和DCC汽油中的烯烃在一种晶粒度为20～50纳米的改性纳米ZSM-5沸石上可有效地转化为芳烃，降烯烃幅度达20个体积百分点以上，改质后汽油的辛烷值、组成和沸程等指标均满足新国标要求．     

阳离子改性HZSM-5沸石上低碳醇转化为芳烃

低碳醇等含氧化合物能在HZSM-5上选择转化为汽油和芳烃.HZSM-5用某些阳离子改性可提高甲醇和乙醇的芳构化活性.本文研究了阳离子改生HZSM-5沸石的酸性质变化与低碳醇芳构化反应性能之间的关系. 1.催化剂制备:将直接法ZSM-5原粉制成氢型(HZ),SiO_2/Al_2O_3为37.再用离子交换法进行改性,制得Cu,Zn,Cd,Mn和Ga改性沸石,代号和金属含量(％)分     

无胺合成[Fe]ZSM-5分子筛的结构鉴定及其催化性能的研究

不用有机胺为模板剂,在碱性介质中采用水热合成法成功地合成了[Fe]ZSM-5分子筛.用X射线衍射、透射电镜、红外光谱、顺磁共振谱、X射线光电子能谱和穆斯堡尔谱等对其结构进行了表征,结果表明,Fe原子进入了分子筛骨架,并处于四面体的配位环境.在由甲醇转化为汽油的过程中,以本文合成的[Fe]ZSM-5与用有机胺为模板剂合成的[Fe]ZSM-5分子筛为催化剂相比,其活性和选择性几乎相同,且都比通常的H[Al]ZSM-5好,C₅组分以上的选择性大于80%,且芳烃(包括脂环烃)和异构烃的含量达75%以上.     

不同晶粒ZSM-5沸石分子筛对合成气羰基化反应性能的影响

对沸石分子筛而言,分子筛的孔道、孔径、孔容和微孔等物理性质和酸性影响它的活性.通过调节和控制以上物理性质能够提高产物选择性和收率,降低副产物,从而促进反应性能提高活性.我们考察了ZSM-5分子筛的晶粒度和硅铝比对合成气羰基化反应性能的影响.结果表明,晶粒度小及具有一定比例的中强酸中心的ZSM-5沸石分子筛对反应有利,但晶粒度比较大即1和3μm的ZSM-5沸石分子筛目标产物选择性比较低.纳米级的ZSM-5沸石分子筛催化剂在反应中表现出较高的活性及较低的副产物选择性,是适宜的合成气羰基化反应催化剂载体.温度考察结果可知,反应温度为300℃时,效果为最佳.其中, 30～50 nm的ZSM-5沸石分子筛催化剂CO转化率为55%,乙酸甲酯和甲酸甲酯选择性之和为52%,而晶粒度3μm时, CO转化率仅为25%,乙酸甲酯和甲酸甲酯选择性之和为20%,是30～50 nm沸石分子筛的一半.当反应继续升温时,副产物的选择性也随之增加,是因为所生成的中间产物和甲醇等继续进行各种反应生成二甲醚、芳烃、烷烃以及裂解生成CO_2等干气.     

用TG-DTG技术研究不同硅铝比和改质ZSM-5沸石的酸性及其催化性能

ZSM-5沸石对某些催化反应具有择形作用,而且可通过改质调变其酸性和孔道大小以适应不同催化反应的要求.ZSM-5的催化活性主要取决于其表面酸性.近年来国内外对沸石的酸性,酸性与反应活性和选择性的关系进行了很多研究.测定固体催化剂的表面酸性有指示剂法、光谱法、碱性气体吸附法和量热法等.目前以采用碱性气体吸附法和程序升温脱附技术最为普遍.因为它能在接近催化反应条件下进行测量,但缺点是定量准确性差,特别是在吸附质有分解的情况下.为克服这一缺点,本文采用碱性气体吸附,用热重(TG)和微商热重(DTG)技术,首先在氢型ZSM-5沸石上进行了尝试,考察了硅铝比对表面酸性的影响.然后对甲醇转化为低级烯烃用的ZSM-5催化剂和以磷、镁改     

大晶粒ZSM-5沸石的合成及其性能

本文对合成均匀大晶粒ZSM-5沸石(20×40μ)的影响因素进行了探讨,并对照小晶粒ZSM-5沸石(<5μ)的物化性质以及甲苯歧化、丙烯芳烃化和乙烯转化反应进行了对比考察。发现添加Sb_2O_3改性后的大品粒ZSM-5沸石较小晶粒ZSM-5沸石有优越的择形选择性和稳定性。根据两种晶粒沸石对同类物质的吸附容量以及Sb_2O_3和沸石间的互相作用的差异,对上述反应性能进行了初步阐明。     

沸石在甲醇转化为烃过程中积炭性能的考察

用热重法(TGA)和程序升温脱附法(TPD)考察了几种不同孔道结构的沸石——毛沸石(HE),类毛—菱钾沸石(HSW),Fu-1,ZSM-5,ZSM-11,丝光沸石(HM)和Y 型沸石——在甲醇转化为烃时的积炭行为。认为甲醇在沸石上转化为烃时的积炭倾向不仅与沸石的孔道结构有关,而且也与其强酸部位(即TPD 谱的峰Ⅱ)的酸量有着密切关系。甲醇在所考察过的七种沸石上的积炭初速度有着如下排列顺序:HE>(HSW,HY)>HM>(HF,HZSM-5,HZSM-11);其除炭初速度的大小有着与积炭初速度一致的顺序。采用往ZSM-5沸石上添加磷或镁等化合物以改质的方法,可以调节沸石的酸性和孔道尺寸,使得沸石的抗积炭能力增强,有利于改善沸石催化剂的稳定性和选择性。甲醇在改质沸石催化剂上转化为烃时的积炭初速度有着下列顺序,Zn ZSM-5》HZSM-5>Mg ZSM-5>PZSM-5>MnZSM-5。     

不同硅铝比ZSM-5分子筛作为助催化剂在渣油裂化中的应用（英文）

采用不同方法表征了硅铝比(Si O2/Al2O3)为33、266和487的质子型ZSM-5分子筛,并研究了ZSM-5分子筛作为助催化剂在渣油裂解中的应用.与USY分子筛基催化剂混合后,在固定流化床上,评价了ZSM-5分子筛助催化剂的催化裂化性能.研究发现,提高ZSM-5分子筛硅铝比,可以有效抑制混合催化剂对汽油烯烃的裂解,从而避免了汽油烷烃的大量损失.加入ZSM-5助催化剂后,伴随着液化气(LPG)产率的增加,异丁烷和异戊烷产率增加,这可能是由USY基催化剂和ZSM-5助催化剂的综合效应引起的.汽油烷烃和芳烃含量的变化,引起了汽油辛烷值的增加.高硅铝比ZSM-5分子筛(硅铝比为266和487)不仅可以显著改善汽油的辛烷值,而且有效避免了汽油的大量损失.催化汽油辛烷值的改善主要是由于高硅铝比ZSM-5分子筛具有适宜的芳构化和异构化活性,这些变化主要源于高硅铝比ZSM-5分子筛小的孔道直径和适宜的酸性.     

不同硅铝比ZSM-5分子筛作为助催化剂在渣油裂化中的应用

采用不同方法表征了硅铝比(SiO2/Al2O3)为33、266和487的质子型ZSM-5分子筛,并研究了ZSM-5分子筛作为助催化剂在渣油裂解中的应用。与USY分子筛基催化剂混合后,在固定流化床上,评价了ZSM-5分子筛助催化剂的催化裂化性能。研究发现,提高ZSM-5分子筛硅铝比,可以有效抑制混合催化剂对汽油烯烃的裂解,从而避免了汽油烷烃的大量损失。加入ZSM-5助催化剂后,伴随着液化气(LPG)产率的增加,异丁烷和异戊烷产率增加,这可能是由USY基催化剂和ZSM-5助催化剂的综合效应引起的。汽油烷烃和芳烃含量的变化,引起了汽油辛烷值的增加。高硅铝比ZSM-5分子筛(硅铝比为266和487)不仅可以显著改善汽油的辛烷值,而且有效避免了汽油的大量损失。催化汽油辛烷值的改善主要是由于高硅铝比ZSM-5分子筛具有适宜的芳构化和异构化活性,这些变化主要源于高硅铝比ZSM-5分子筛小的孔道直径和适宜的酸性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.