Selection and amplification of mixed-metal porphyrin cages from dynamic combinatorial libraries

Mixed metallo-porphyrin cages were selected and amplified from dynamic combinatorial libraries (DCLs) by using appropriate templates. The cages are composed of two bisphosphine substituted zinc(II) porphyrins as ligand donors and two rhodium(III) or ruthenium(II) porphyrins as ligand acceptors, and are connected through metal-phosphorus coordination. Ru and Rh porphyrins that display a large structural diversity were employed. The templating was achieved by using 4,4'-bpy, 3,3'-dimethyl-4,4'-bipyridine and benzo[lmn]-3,8-phenanthroline, and acts through zinc-nitrogen coordination. The absolute amount of amplification from the DCLs is strongly dependent on the combination of the Ru/Rh porphyrin and the template; cages with sterically demanding porphyrins can only form with smaller templates. In the case of tert-butyl-substituted TPP (TPP=tetraphenylporphyrin), cages are not formed at all. The formation of the cages is usually complete within 24 h at an ambient temperature; in the case of the cage containing Rh(III)OEP (OEP=octaethylporphyrin) and bpy, the pseudo-first-order rate constant of cage formation was determined to be 2.1+/-0.1x10(-4) s(-1) (CDCl(3), 25 degrees C). Alternatively, heating the mixtures to 65 degrees C and cooling to room temperature yields the cages within minutes. The (1)H NMR chemical shifts of several characteristic protons show large differences upon changing the identity of the Ru/Rh porphyrin and the central metal; this is most likely to arise from variations in the geometry of the cages. The X-ray crystal structure of a cage, which contains Rh(III)OEP as a porphyrin acceptor and bpy as template, demonstrates that the cages can adopt severely distorted conformations to accommodate the relatively short templates. An extension to mixed DCLs showed that only limited selectivity is displayed by the various templates. Formation of mixed cages that contain two different rhodium porphyrins prevents effective selection, although the kinetic lability of the systems allows for some amplification. This lability, however, also prevents isolation of the individual cages. Removal of the template leads to re-equilibration, thus the templates act as scaffolds to keep the structures intact.     

Construction of multiporphyrin arrays using ruthenium and rhodium coordination to phosphines

The synthesis of linear multiporphyrin arrays with mono- and bisphosphine-substituted porphyrins as ligand donors and ruthenium(II) or rhodium(III) porphyrins as ligand acceptors is described. With appropriate amounts of the building blocks mixed, linear dimeric and trimeric arrays have been synthesized and analyzed by (1)H NMR and (31)P NMR spectroscopy. The Ru/Rh acceptor porphyrins can be located either at the periphery or in the center of the array. Likewise, the monophosphine porphyrins can be positioned at the periphery, thus allowing a high degree of freedom in the overall composition of the arrays. This way, both donor and acceptor porphyrins can act as chain extenders or terminators. One of the trimeric complexes with two nickel and one ruthenium porphyrin has also been analyzed by X-ray crystallography. Attempts have also been made to synthesize higher order arrays by mixing appropriate amounts of the porphyrins; however, from the NMR data it cannot be concluded if monodisperse five, seven, or nine porphyrin arrays are present or if the solutions are composed of a statistical mixture of smaller and larger arrays.     

Synthesis of Pd complexes combined with photosensitizing of a ruthenium(II) polypyridyl moiety through a series of substituted bipyrimidine bridges. Substituent effect of the bridging ligand on the photocatalytic dimerization of alpha-methylstyrene

Mononuclear ruthenium complexes and dinuclear Ru...Pd complexes having a series of 2,2'-bipyrimidine ligands, [(bpy)2Ru(Ln)]2+ [Ln = 2,2'-bipyrimidine (L1), 5,5'-dimethyl-2,2'-bipyrimidine (L2), 5,5'-dibromo-2,2'-bipyrimidine (L3), 4,4'-dimethyl-2,2'-bipyrimidine (L4), and 4,4',6,6'-tetramethyl- 2,2'-bipyrimidine (L5)] and [(bpy)2Ru(Ln)PdL]m+ [Ln = L1-L3; PdL = PdMeCl (m = 2) and PdMe(solvent) (m = 3)], are prepared, and the obtained complexes are characterized by means of spectroscopic and crystallographic methods. Introduction of the substituents on the bipyrimidine ligands led to the substantial differences in their electrochemical and photophysical properties. Density functional theory calculations have been performed to understand the substituent effect on the ground-state molecular orbital energy level. Reactivity studies on the catalytic dimerization of alpha-methylstyrene revealed that the Pd complex having a Br-substituted bipyrimidine ligand were much more active than those of the corresponding Pd complexes having methyl-substituted or nonsubstituted bipyrimidine ligands.     

Rhenium(IV) compounds inducing apoptosis in cancer cells

The anticancer properties of a series of mononuclear Re(IV) compounds of formula ReCl(4)L (where L is bpy = 2,2'-bipyridine; bpym = 2,2'-bipyrimidine; dmbpy = 4,4'-dimethyl-2,2'-bipyridine; phen = 1,10-phenanthroline) were investigated for the first time. All compounds displayed potent in vitro antiproliferative activity against selected cancer cells.     

Improved synthesis of 2,2'-bipyrimidine

A high-yield synthesis was developed for the preparation of 2,2'-bipyrimidine (1) using the Ullmann coupling of 2-iodopyrimidine. The new procedure was also used for the preparation of 4,4',6,6'-tetramethyl-2,2'-bipyrimidine (2) and 5,5'-dibromo-2,2'-bipyrimidine (3).     

Synthesis and structural,electrochemical, and optical properties of Ru(II) complexes with azobis(2,2'-bipyridine)s

Two new ditopic ligands, 5,5"-azobis(2,2'-bipyridine) (5,5"-azo) and 5,5"-azoxybis(2,2'-bipyridine) (5,5"-azoxy), were prepared by the reduction of nitro precursors. Mononuclear and dinuclear Ru(II) complexes having one of these bridging ligands and 2,2'-bipyridine terminal ligands were also prepared, and their properties were compared with previously reported Ru(II) complexes having 4,4"-azobis(2,2'-bipyridine) (4,4"-azo). The X-ray crystal structure showed that 5,5"-azo adopts the trans conformation and a planar rodlike shape. The X-ray crystal structure of [(bpy)(2)Ru(5,5"-azo)Ru(bpy)(2)](PF(6))(4) (Ru(5,5"-azo)Ru) showed that the bridging ligand is in the trans conformation and nearly planar also in the complex and the metal-to-metal distance is 10.0 A. The azo or azoxy ligand in these complexes exhibits reduction processes at less negative potentials than the terminal bpy's due to the low-lying pi level. The electronic absorption spectra for the complexes having 5,5"-azo or 5,5"-azoxy exhibit an extended low-energy metal-to-ligand charge-transfer absorption. The ligands, 5,5"-azo and 5,5"-azoxy, and the mononuclear complex, [(bpy)(2)Ru(5,5"-azo)](2+), isomerize reversibly upon light irradiation. The low-energy MLCT state sensitizes the isomerization of the azo moiety in this complex. While [(bpy)(2)Ru(4,4"-azo)Ru(bpy)(2)](PF(6))(4) exhibits light switch properties, namely, significant electrochromism and a large luminescence enhancement, upon reduction, Ru(5,5"-azo)Ru does not show these properties. The radical anion formation upon reduction of these complexes has been confirmed by ESR spectroscopy.     

Room temperature phosphorescence from ruthenium(II) complexes bearing conjugated pyrenylethynylene subunits

We describe the synthesis, electrochemistry, and photophysical properties of several Ru(II) complexes bearing different numbers of pyrenylethynylene substituents in either the 5- or 5,5'-positions of 2,2'-bipyridine, along with the appropriate Ru(II) model complexes bearing either bromo- or ethynyltoluene functionalities. In addition, we prepared and studied the photophysical behavior of the diimine ligands 5-pyrenylethynylene-2,2'-bipyridine and 5,5'-dipyrenylethynylene-2,2'-bipyridine. Static and dynamic absorption and luminescence measurements reveal the nature of the lowest excited states in each molecule. All model Ru(II) complexes are photoluminescent at room temperature and exhibit excited-state behavior consistent with metal-to-ligand charge transfer (MLCT) characteristics. In the three Ru(II) molecules bearing multiple pyrenylethynylene substituents, there is clear evidence that the lowest excited state is triplet intraligand (3IL)-based, yielding long-lived room temperature phosphorescence in the red and near IR. This phosphorescence emanates from either 5-pyrenylethynylene-2,2'-bipyridine or 5,5'-dipyrenylethynylene-2,2'-bipyridine, depending upon the composition of the coordination compound. In the former case, the excited-state absorption difference spectra that were measured for the free ligand are easily superimposed with those obtained for the metal complexes coordinated to either one or two of these species. The latter instance is slightly complicated since coordination of the 5,5'-ligand to the Ru(II) center planarizes the diimine structure, leading to an extended conjugation on the long axis with a concomitant red shift of the singlet pi-pi absorption transitions and the observed room temperature phosphorescence. As a result, transient absorption measurements obtained using free 5,5'-dipyrenylethynylene-2,2'-bipyridine show a marked blue shift relative to its Ru(II) complex, and this extended pi-conjugation effect was confirmed by coordinating this ligand to Zn(II) at room temperature. In essence, all three pyrenylethynylene-containing Ru(II) complexes are unique in this genre of chromophores since the lowest excited state is 3IL-based at room temperature and at 77 K, and there is no compelling evidence of interacting or equilibrated excited states.     

Axial Ligand Effects on the Redox Reactions of Manganese Porphyrins

A systematic study for the effect of axially coordinated monovalent anions on the electrode reactions of several manganese porphyrins in acetonitrile is presented. Potential shifts of the metal-centered reduction with changes in counterion were related to the degree of Mn(III)-counterion interaction. In the electrochemically induced ligand exchange, perchlorate anion replaces the other anions as axial ligand coordinated to Mn(III) at oxidation potential less than the first oxidation of manganese porphyrins. Formation constants for axial ligation of OH^? are calculated. One-electron oxidation of dihydroxide coordinated manganese porphyrins generate oxomanganese(IV) porphyrin complexes electrochemically. O=Mn^IVOEP(OH) is more thermodynamically stable than O=Mn^IVTPP(OH), while O=Mn^IVTpFPP(OH) cannot be generated electrochemically. In the presence of styrene or cyclohexene, the absorption spectra of oxomanganese(IV) porphyrins are changed to form manganese(III) porphyrins gradually, which indicates the oxygen atom transfer from oxomanganese(IV) porphyrins to the substrates.     

Porphyrins linked directly to the 5,5' positions of 2,2'-bipyridine: a new supramolecular building block and switch

The synthesis and coordination chemistry of two porphyrin dimers linked either at the 5,5' or the 4,4' positions of 2,2'-bipyridine are described. These compounds, which may serve a molecular tectons for the constructions of a variety of supramolecular arrays of diverse function, reveal that the ground- and excited-state electronic communication between the chromophores is only moderately affected by the complexation state of the bipyridyl moiety. The nature of the metal ion chelated by the bipyridine only slightly perturbs the ground-state spectra, and differences observed in the excited state are largely ascribed to the heavy atom effect. This work also shows that conformational changes in structural subunits, in this case induced by bipyridyl complexation of various metal ions, do not necessarily require reorganization of supramolecular systems.     

15N NMR coordination shifts in Pd(II), Pt(II), Au(III), Co(III), Rh(III), Ir(III), Pd(IV), and Pt(IV) complexes with pyridine, 2,2'-bipyridine, 1,10-phenanthroline, quinoline, isoquinoline, 2,2'-biquinoline, 2,2':6', 2'-terpyridine and their alkyl or aryl derivatives

The 15N NMR data for 105 complexes of Pd(II), Pt(II), Au(III), Co(III), Rh(III), Ir(III), Pd(IV), and Pt(IV) complexes with simple azines such as pyridine, 2,2'-bipyridine, 1,10-phenanthroline, quinoline, isoquinoline, 2,2'-biquinoline, 2,2':6', 2'-terpyridine and their alkyl or aryl derivatives have been reviewed. The 15N NMR coordination shifts, i.e. the differences between the 15N chemical shifts of the same nitrogen in the molecules of the complex and the ligand (Delta(15N) (coord) = delta(15N) (compl)--delta(15N) (lig)), have been related to some structural features of the reviewed coordination compounds, like the type of the central ion and the character of auxiliary ligands (mainly in trans position). These Delta(15N) (coord) parameters are negative, their absolute magnitudes (ca 30-150 ppm) generally increasing in the metal order Au(III) < Pd(II) < Pt(II) and Rh(III) < Co(III) < Pt(IV) < Ir(III), as well as with the enhanced trans influence of the other donor atoms (H, C < Cl < N).     

Preparation of 5-brominated and 5,5'-dibrominated 2,2'-bipyridines and 2,2'-bipyrimidines.

Efficient syntheses of 5-brominated and 5,5'-dibrominated 2,2'-bipyridines and 2,2'-bipyrimidines, useful for the preparation of metal-complexing molecular rods, have been developed. 5-Bromo-2,2'-bipyridine, 5-bromo-5'-n-butyl-2,2'-bipyridine, and 5-bromo-5'-n-hexyl-2,2'-bipyridine were obtained by Stille coupling of 2,5-dibromopyridine with 2-trimethylstannylpyridine or the requisite 5-alkyl-2-trimethylstannylpyridine, obtained via regioselective zincation of a 3-alkylpyridine.BF(3) complex in the less hindered of the two reactive positions with lithium di-tert-butyl-(2,2,6,6-tetramethylpiperidino)zincate. 5,5'-Dibromo-2,2'-bipyridine was obtained by the reductive symmetric coupling of 2,5-dibromopyridine with hexa-n-butyldistannane. The yields of these coupling reactions ranged from 70 to 90%. 5-Bromo- and 5,5'-dibromo-2,2'-bipyrimidines were obtained in yields of 30 and 15%, respectively, by bromination of 2,2'-bipyrimidine, prepared from 2-chloropyrimidine in 80% yield by an improved reductive symmetric coupling procedure.     

Coordination Studies of Iron(II) Protoporphyrin IX and Iron(II) Hematoporphyrin IX with 4,4′-Dipyridyl and other Nitrogenous Bases

Abstract

The results of spectral studies of iron(II) protopor-phyrin IX and iron(II) hematoporphyrin IX with several substituted pyridines are reported. The existence in solution of an iron(II) porphyrin complex coordinated to a water molecule and to a substituted pyridine was shown by isolation of the complex from solution. The complex isolated was dimeric inono-4,4′-dipyridyl diaquo iron(II) hematoporphyrin. Addition of ethanol to the aqueous solvent inhibits coordination of iron(II) porphyrins with substituted pyridines. The protoporphyrin ring enhances coordination relative to the hematoporphyrin ring.     

Supramolecular tetrads containing Sn(IV) porphyrin, Ru(II) porphyrin, and expanded porphyrins assembled using complementary metal-ligand interactions

Two examples of supramolecular tetrads containing Sn(IV) porphyrin, expanded thiaporphyrins such as sapphyrin and rubyrin, and Ru(II) porphyrin assembled using non-interfering cooperative tin(IV)-oxygen and ruthenium(II)-nitrogen coordination properties are described. These are the first examples in which the expanded porphyrins are used as axial ligands. The tetrads were prepared by adopting one step as well as stepwise approaches. In a one pot approach, the mono meso-pyridyl dihydroxy Sn(IV) porphyrin, meso-hydroxyphenyl expanded thiaporphyrin, and Ru(II) porphyrin were reacted in benzene under refluxing conditions followed by column chromatographic purification on alumina to afford tetrads. In a stepwise approach, the axial bonding type of triads containing Sn(IV)porphyrin as central unit and expanded thiaporphyrins as axial ligands were synthesized first by reacting meso-pyridyl dihydroxy Sn(IV) porphyrin with meso-hydroxyphenyl expanded thiaporphyrin in benzene at refluxing temperature. In the next step, the triads were reacted with Ru(II) porphyrin under mild reaction conditions to afford tetrads in decent yields. Both methods worked efficiently and produced stable, soluble tetrads in decent yields. One-dimensional (1D) and two-dimensional (2D) NMR techniques were used to confirm the identity of these novel tetrads. Absorption and electrochemical studies indicated that the components in tetrads interact weakly and retain their individual characteristic features. The steady state photophysical studies revealed that the quantum yield of Sn(IV) porphyrin in tetrads was reduced significantly because of non-radiative decay pathways operating in these systems.     

Synthesis of heteroleptic bis(diimine)carbonylchlororuthenium(II) complexes from photodecarbonylated precursors

The reactions of bidentate diimine ligands (L2) with binuclear [Ru(L1)(CO)Cl2]2 complexes [L1 not equal to L2 = 2,2'-bipyridine (bpy), 4,4'-dimethyl-2,2'-bipyridine (4,4'-Me2bpy), 5,5'-dimethyl-2,2'-bipyridine (5,5'-Me2bpy), 1,10-phenanthroline (phen), 4,7-dimethyl-1,10-phenanthroline (4,7-Me2phen), 5,6-dimethyl-1,10-phenanthroline (5,6-Me2phen), di(2-pyridyl)ketone (dpk), di(2-pyridyl)amine (dpa)] result in cleavage of the dichloride bridge and the formation of cationic [Ru(L1)(L2)(CO)Cl]+ complexes. In addition to spectroscopic characterization, the structures of the [Ru(bpy)(phen)(CO)Cl]+, [Ru(4,4'-Me2bpy)(5,6-Me2phen)(CO)Cl]+ (as two polymorphs), [Ru(4,4'-Me2bpy)(4,7-Me2phen)(CO)Cl]+, [Ru(bpy)(dpa)(CO)Cl]+, [Ru(5,5'-Me2bpy)(dpa)(CO)Cl]+, [Ru(bpy)(dpk)(CO)Cl]+, and [Ru(4,4'-Me2bpy)(dpk)(CO)Cl]+ cations were confirmed by single crystal X-ray diffraction studies. In each case, the structurally characterized complex had the carbonyl ligand trans to a nitrogen from the incoming diimine ligand, these complexes corresponding to the main isomers isolated from the reaction mixtures. The synthesis of [Ru(4,4'-Me2bpy)(5,6-Me2bpy)(CO)(NO3)]+ from [Ru(4,4'-Me2bpy)(5,6-Me2bpy)(CO)Cl]+ and AgNO3 demonstrates that exchange of the chloro ligand can be achieved.     

Synthesis of bipyridylene-bridged bisporphyrin by nickel-mediated coupling reaction: ON-OFF control of cofacial porphyrin unit by reversible complexation.

Novel bipyridylene-bridged bisporphyrin 1a, in which two porphyrin units were attached directly to symmetrical 4,4'-positions of the 2,2'-bipyridyl group, was synthesized by a nickel(0)-mediated homocoupling reaction of 5,10,15-tris(n-heptyl)-20-(2'-bromo-4'-pyridyl)porphyrinatozinc (3a) in 58% yield. Spatial geometries of two porphyrins in 1a were regulated by reversible complexation of the bipyridyl part with PdCl(2). Thus, the addition of 2.2 equiv of palladium chloride to 1a converted the freely rotating conformation to the cofacial bisporphyrin 2a. The subsequent addition of 4,4'-dimethyl-2,2'-bipyridine 9 regenerated the initial bisporphyrin 1a.     

Bipyrimidine-Bridged Mixed-Metal Trimetallic Complexes of Ruthenium(II) with Rhodium(III) or Iridium(III), {[(bpy)(2)Ru(bpm)](2)MCl(2)}(5+)

Bipyrimidine-bridged trimetallic complexes of the form {[(bpy)(2)Ru(bpm)](2)MCl(2)}(5+), where M = Rh(III) or Ir(III), bpy = 2,2'-bipyridine, and bpm = 2,2'-bipyrimidine, have been synthesized and characterized. These complexes are of interest in that they couple catalytically active rhodium(III) and iridium(III) metals with light-absorbing ruthenium(II) metals within a polymetallic framework. Their molecular composition is a light absorber-electron collector-light absorber core of a photochemical molecular device (PMD) for photoinitiated electron collection. The variation of the central metal has some profound effects on the observed properties of these complexes. The electrochemical data for the title trimetallics consist of a Ru(II/III) oxidation and sequential reductions assigned to the bipyrimidine ligands, Ir or Rh metal centers, and bipyridines. In both trimetallic complexes, the first oxidation is Ru based and the bridging ligand reductions occur prior to the central metal reduction. This illustrates that the highest occupied molecular orbital (HOMO) is localized on the ruthenium metal center and the lowest unoccupied molecular orbital resides on the bpm ligand. This bpm-based LUMO in {[(bpy)(2)Ru(bpm)](2)RhCl(2)}(5+) is in contrast with that observed for the monometallic [Rh(bpm)(2)Cl(2)](+) where the Rh(III)/Rh(I) reduction occurs prior to the bpm reduction. This orbital inversion is a result of bridge formation upon construction of the trimetallic complex. Both the Ir- and Rh-based trimetallic complexes exhibit a room temperature emission centered at 800 nm with tau = 10 ns. A detailed comparison of the spectroscopic, electrochemical, and spectroelectrochemical properties of these polymetallic complexes is described herein.     

Synthesis and characterization of tris(heteroleptic) Ru(II) complexes bearing styryl subunits

We have developed and optimized a well-controlled and refined methodology for the synthesis of substituted π-conjugated 4,4'-styryl-2,2'-bipyridine ligands and also adapted the tris(heteroleptic) synthetic approach developed by Mann and co-workers to produce two new representative Ru(II)-based complexes bearing the metal oxide surface-anchoring precursor 4,4'-bis[E-(p-methylcarboxy-styryl)]-2,2'-bipyridine. The two targeted Ru(II) complexes, (4,4'-dimethyl-2,2'-bipyridine)(4,4'-di-tert-butyl-2,2'-bipyridine)(4,4'-bis[E-(p-methylcarboxy-styryl)]-2,2'-bipyridine) ruthenium(II) hexafluorophosphate, [Ru(dmbpy)(dtbbpy)(p-COOMe-styryl-bpy)](PF(6))(2) (1) and (4,4'-dimethyl-2,2'-bipyridine)(4,4'-dinonyl-2,2'-bipyridine)(4,4'-bis[E-(p-methylcarboxy-styryl)]-2,2'-bipyridine) ruthenium(II) hexafluorophosphate, [Ru(dmbpy)(dnbpy)(p-COOMe-styryl-bpy)](PF(6))(2) (2) were obtained as analytically pure compounds in high overall yields (>50% after 5 steps) and were isolated without significant purification effort. In these tris(heteroleptic) molecules, NMR-based structural characterization became nontrivial as the coordinated ligand sets each sense profoundly distinct magnetic environments greatly complicating traditional 1D spectra. However, rational two-dimensional approaches based on both homo- and heteronuclear couplings were readily applied to these structures producing quite definitive analytical characterization and the associated methodology is described in detail. Preliminary photoluminescence and photochemical characterization of 1 and 2 strongly suggests that both molecules are energetically and kinetically suitable to serve as sensitizers in energy-relevant applications.     

Mono- and dinuclear ruthenium(II) 1,6,7,12-tetraazaperylene complexes

We report the synthesis of free 1,6,7,12-tetraazaperylene (tape). Tape was obtained from 1,1'-bis-2,7-naphthyridine by potassium promoted cyclization followed by oxidation with air. Mono- and dinuclear ruthenium(II) 1,6,7,12-tetraazaperylene complexes of the general formulas [Ru(L-L)(2)(tape)](PF(6))(2), [1](PF(6))(2)-[5](PF(6))(2), and [{Ru(L-L)(2)}(2)(μ-tape)](PF(6))(4), [6](PF(6))(4)-[10](PF(6))(4), with{L-L = phen, bpy, dmbpy (4,4'-dimethyl-2,2'-bipyridine), dtbbpy (4,4'-ditertbutyl-2,2'-bipyridine) and tmbpy (4,4'5,5'-tetramethyl-2,2'-bipyridine)}, respectively, were synthesized. The X-ray structures of tape·2CHCl(3) and the mononuclear complexes [Ru(bpy)(2)(tape)](PF(6))(2)·0.5CH(3)CN·0.5toluene, [Ru(dmbpy)(2)(tape)](PF(6))(2)·2toluene and [Ru(dtbbpy)(2)(tape)](PF(6))(2)·3acetone·0.5H(2)O were solved. The UV-vis absorption spectra and the electrochemical behavior of the ruthenium(ii) tape complexes were explored and compared with the data of the analogous dibenzoeilatin (dbneil), 2,2'-bipyrimidine (bpym) and tetrapyrido[3,2-a:2',3'-c:3',2'-h:2',3'-j]phenazin (tpphz) species.     

Heteroleptic ruthenium complexes containing uncommon 5,5'-disubstituted-2,2'-bipyridine chromophores for dye-sensitized solar cells

Four new heteroleptic ruthenium sensitizers [Ru(4,4'-carboxylic acid-2,2'-bipyridine)(L)(NCS)(2)] (L = 5,5'-bis(4-octylthiophen-2-yl)-2,2'-bipyridine (1), 5,5'-bis(N,N-diphenyl-4-aminophenyl)-2,2'-bipyridine (2), 5,5'-bis(5-(N,N-diphenyl-4-aminophenyl)-thiophen-2-yl)-2,2'-bipyridine (3) and 5,5'-bis(4-octyl-5-(N,N-diphenyl-4-aminophenyl)-thiophen-2-yl)-2,2'-bipyridine (4)) were synthesized, characterized by physicochemical and computational methods, and utilized as photosensitizers in nanocrystalline dye-sensitized solar cells (DSSCs). The λ(max) of the metal-to-ligand charge transfer (MLCT) absorption of these four ruthenium dyes (527 nm for 1, 535 nm for 2, 585 nm for 3 and 553 nm for 4) can be tuned by various structural modifications of the ancillary ligand and it was shown that increasing the conjugation length of such ligand reduces the energy as well as the molar absorption coefficient of the MLCT band. The maximum incident photon to current conversion efficiency (IPCE) of 41.4% at 550 nm, 38.6% at 480 nm, 39.4% at 470 nm and 31.1% at 480 nm for 1-, 2-, 3- and 4-sensitized solar cells were obtained. Respectable power conversion efficiencies of 3.00%, 2.51%, 2.00% and 2.03% were realized, respectively, when the sensitizers 1, 2, 3 and 4 were used in DSSCs under the standard air mass (AM) 1.5 sunlight illumination (versus 5.9% for standard N719).     

Selective Endo and Exo Binding of Mono‐ and Ditopic Ligands to a Rhomboidal Diporphyrin Prism

Copper(I) can preferentially form heteroleptic complexes containing two phosphine and two nitrogen donors due to steric factors. This preference was employed to direct the self‐assembly of a porphyrin‐faced rhomboidal prism having two parallel tetrakis(4‐iminopyridyl)porphyrinatozinc(II) faces linked by eight 1,4‐bis(diphenylphosphino)benzene pillars. The coordination preferences of the Cu^I ions and geometries of the ligands come together to generate a slipped‐cofacial orientation of the porphyrinatozinc(II) faces. This orientation enables selective encapsulation of 3,3′‐bipyridine (bipy), which bridges the Zn^II ions of the parallel porphyrins, whereas 4,4′‐bipy exhibits weaker external coordination to the porphyrin faces. Reaction with 2,2′‐bipy, by contrast, results in the displacement of the tetratopic porphyrin ligand and formation of [{(2,2′‐bipy)Cu^I}₂(diphosphine)₂]. The differing strengths of interactions of bipyridine isomers with the system allows for a hierarchy to be deciphered, whereby 4,4′‐bipy may be displaced by 3,3′‐bipy, which in turn is displaced by 2,2′‐bipy.