Preparation of polymide-imides by direct polycondensation with triphenyl phosphite. V. Aliphatic-aromatic polyamide-imides based on N,N′-bis(ω-carboxyalkyl) benzophenone-3,3′,4,4′-tetracarboxylic diimides

Five diimide-dicarboxylic acids were prepared from benzophenone-3,3′,4,4′-tetracarboxylic dianhydride and glycine, β-analine, 4-aminobutyric acid, 6-aminocaproic acid, and 11-aminoundecanoic acid. New aromatic-aliphatic polyamide-imides were prepared by the direct polycondensation of these diacids with aromatic diamines using triphenyl phosphite in N-methyl-2-pyrrolidone (NMP)–Pyridine solution in the presence of calcium chloride. The resulting polymers were characterized by inherent viscosity, infrared spectra, elemental analyses, solubility, differential scanning calorimetry (DSC), thermogravimetry, and wideangle x-ray diffraction measurements.     

Synthesis of Some Novel Phenyl Substituted Oxothiazolidin- 1’’,3’’,4’’-thiadiazolo-[3’,4’-b]thiazoline of 3β-Substituted Cholestane

Three title compounds 4a—4c have been synthesized by the cyclodehydration of 1’-benzylidine-4’-(3β-substituted-5α-cholestane-6-yl)thiosemicarbazones 2a—2c with thioglycolic acid followed by the treatment with cold conc. H2SO4 in dioxane. The compounds 2a—2c were prepared by condensation of 3β-substituted-5α-cholestan- 6-one-thiosemicarbazones 1a—1c with benzaldehyde. These thiosemicarbazones 1a—1c were obtained by the reaction of corresponding 3β-substituted-5α-cholestan-6-ones with thiosemicarbazide in the presence of few drops of conc. HCl in methanol. The structures of the products have been established on the basis of their elemental, analytical and spectral data.     

2′‐Hydroxy‐4′′‐dimethylaminochalcone

The title compound, 3‐[4‐(di­methyl­amino)­phenyl]‐1‐(2‐hydroxy­phenyl)­prop‐2‐en‐1‐one, C₁₇H₁₇NO₂, is a chalcone derivative substituted by 2′‐hydroxyl and 4′′‐di­methyl­amino groups. The crystal structure indicates that the aniline and hydroxy­phenyl groups are nearly coplanar, with a dihedral angle of 10.32 (16)° between their phenyl rings. The molecular planarity of this substituted chalcone is strongly affected by the 2′‐hydroxyl group.     

High temperature polymers. II. High temperature polymers from 4,4′-[sulfonylbis-(p-phenyleneoxy)]dianiline

Novel aromatic diamines have been prepared which contain an ordered sequence distribution of thermally stable, flexible, or rigid units. The synthesis of these materials involves a nucleophilic displacement reaction in aprotic solvent with, for example, the alkali metal salt of p-aminophenol, optionally, the salt of a bisphenol and an activated aromatic halide. Such monomers are useful “building blocks” for various polymeric systems but are of special interest in those which can benefit from the high glass transition temperature imparted by polar or rigid moieties, together with improved impact properties conveyed by either groups. Polyimides and polyamide-imides are examples and display high heat distortion temperatures, good solvent resistance, excellent mechanical properties, high thermal and oxidative stability and depending on diamine structure and molecular weight, thermoplastic characteristics. The synthesis and properties of polyamides, polyimides and polyamide-imides based on 4,4′-[sulfonylbis(p-phenyleneoxy)] dianiline are presented in this paper.     

Tetranaphthyleno[5,6‐bcd:11,12‐b′c′d′:17,18‐b′′c′′d′′:23,24‐b′′′c′′′d′′′]tetrafuran

The title compound, C₄₀H₁₆O₄ or [C₁₀H₄O]₄, is a planar tetrameric cyclooligomer which crystallizes in the monoclinic space group P2₁/n. The compound is located on an inversion center with the asymmetric unit consisting of half of the molecule. The compound displays an interesting packing structure, where the cyclooligomer displays both layered packing with respect to nearest neighbors and a rotation of adjacent planar rings that results in additional interactions. The geometric parameters of the compound agree well with those of comparable cyclooligomers, while the packing reveals some similarities and differences.     

Synthesis of aromatic polyamide-imides from N,N′-bis(trimethylsilyl)-substituted aromatic diamines and 4-chloroformylphthalic anhydride

The polymerization of N,N′-bis(trimethylsilyl)-substituted aromatic diamines with 4-chloroformylphthalic anhydride in various solvents at a temperature range between 10 and 70°C afforded polyamide-amic acid trimethylsilyl esters having inherent viscosities of 0.8–1.4 dL/g. Transparent and flexible films of the silylated precursor polymers were obtained by casting directly from the polymer solutions. Desilylation of the silylated polymers with methanol resulted in the formation of the corresponding polyamide-amic acids. Subsequent thermal imidization of the silylated precursor polymers with the elimination of trimethylsilanol afforded yellow, transparent, and tough films of the aromatic polyamide-imides. The thermal conversion of the silylated precursor polymer to polyamide-imide proceeded almost as rapidly as that of the corresponding polyamide-amic acid prepared by a conventional method from the parent aromatic diamine and 4-chloroformylphthalic anhydride.     

4′‐Iodo‐2,2′:6′,2′′‐terpyridine

In the nearly planar title compound, C₁₅H₁₀IN₃, the three pyridine rings exhibit transoid conformations about the interannular C—C bonds. Very weak C—H...N and C—H...I interactions link the molecules into ribbons. Significant π–π stacking between molecules from different ribbons completes a three‐dimensional framework of intermolecular interactions. Four different packing motifs are observed among the known structures of simple 4′‐substituted terpyridines.     

Energetic Derivatives of 4, 4′,5, 5′‐Tetranitro‐2, 2′‐bisimidazole (TNBI)

4, 4′,5, 5′‐Tetranitro‐2, 2′‐bisimidazole (TNBI) was synthesized by nitration of bisimidazole (BI) and recrystallized from acetone to form a crystalline acetone adduct. Its ammonium salt ( 1 ) was obtained by the reaction with gaseous ammonia. In order to explore new explosives or propellants several energetic nitrogen‐rich 2:1 salts such as the hydroxylammonium ( 3 ), guanidinium ( 4 ), aminoguanidinium ( 5 ), diaminoguanidinium ( 6 ) and triaminoguanidinium 7 4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolate were prepared by facile metathesis reactions. In addition, methylated 1, 1′‐dimethyl‐4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazole (Me₂TNBI, 8 ) was synthesized by the reaction of 2 and dimethyl sulfate. Metal salts of TNBI can also be easily synthesized by using the corresponding metal bases. This was proven by the synthesis of pyrotechnically relevant dipotassium 4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolate ( 2 ), which is a brilliant burning component e.g. in near‐infrared flares. All compounds were characterized by single crystal X‐ray diffraction, NMR and vibrational spectroscopy, elemental analysis and DSC. The sensitivities were determined by BAM methods (drophammer and friction tester). The heats of formation were calculated using CBS‐4M electronic enthalpies and the atomization method. With these values and mostly the X‐ray densities different detonation parameters were computed by the EXPLO5 computer code. Due to the great thermal stability and calculated energetic properties, especially guanidinium salt 4 could be served as a HNS replacement.     

Two Bulky Conjugated 4′‐(4‐Hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine‐based Layered Complexes: Synthesis,Structure, and Photocatalytic Hydrogen Evolution Activity

Two new layered complexes with the formulas of {[Cu(H₂O)(HL)₂Cl](NO₃)}_n ( 1 ) and {[Cu(H₂O)₂(HL)₂](NO₃)₂}_n ( 2 ) were solvothermally synthesized by the reactions of the bulky conjugated 4′‐(4‐hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine ligand (HL) with different Cu^II salts, which were further used as photocatalysts to achieve hydrogen production from water splitting. Single‐crystal structural analyses reveal that both complexes feature coplanar (4 4) layers with different connection manners between the HL extended Z‐shaped chains. More interestingly, 1 possessing more negative conduction band potential and higher structural stability exhibits a large hydrogen production rate of 2.43 mmol · g^–1 · h^–1, which is four times higher than that of 2 . Thus, the Cu^II‐based coordination polymers modified by the bulky conjugated organic ligand can become potentially promising non‐Pt photocatalysts for hydrogen production from water splitting.     

Cobalt(II) and cobalt(III) complexes with 4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine

4′‐Cyanophenyl‐2,2′:6′,2′′‐terpyridine (cptpy) was employed as an N,N′,N′′‐tridentate ligand to synthesize the compounds bis[4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine]cobalt(II) bis(tetrafluoridoborate) nitromethane solvate, [Co^II(C₂₂H₁₄N₄)₂](BF₄)₂·CH₃NO₂, (I), and bis[4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine]cobalt(III) tris(tetrafluoridoborate) nitromethane sesquisolvate, [Co^III(C₂₂H₁₄N₄)₂](BF₄)₃·1.5CH₃NO₂, (II). In both complexes, the cobalt ions occupy a distorted octahedral geometry with two cptpy ligands in a meridional configuration. A greater distortion from octahedral geometry is observed in (I), which indicates a different steric consequence of the constrained ligand bite on the Co^II and Co^III ions. The crystal structure of (I) features an interlocked sheet motif, which differs from the one‐dimensional chain packing style present in (II). The lower dimensionality in (II) can be explained by the disturbance caused by the larger number of anions and solvent molecules involved in the crystal structure of (II). All atoms in (I) are on general positions, and the F atoms of one BF₄⁻ anion are disordered. In (II), one B atom is on an inversion center, necessitating disorder of the four attached F atoms, another B atom is on a twofold axis with ordered F atoms, and the C and N atoms of one nitromethane solvent molecule are on a twofold axis, causing disorder of the methyl H atoms. This relatively uncommon study of analogous Co^II and Co^III complexes provides a better understanding of the effects of different oxidation states on coordination geometry and crystal packing.     

Three polymorphs of 4‐4′‐diiodobenzalazine,and 4‐chloro‐4′‐iodobenzalazine

Three polymorphs of 4,4′‐diiodobenzalazine (systematic name: 4‐iodobenzaldehyde azine), C₁₄H₁₀I₂N₂, have crystallographically imposed inversion symmetry. 4‐Chloro‐4′‐iodobenzalazine [systematic name: 1‐(4‐chlorobenzylidene)‐2‐(4‐iodobenzylidene)diazane], C₁₄H₁₀ClIN₂, has a partially disordered pseudocentrosymmetric packing and is not isostructural with any of the polymorphs of 4,4′‐diiodobenzalazine. All structures pack utilizing halogen–halogen interactions; some also have weak π (benzene ring) interactions. A comparison with previously published methylphenylketalazines (which differ by substitution of methyl for H at the azine C atoms) shows a fundamentally different geometry for these two classes, namely planar for the alazines and twisted for the ketalazines. Density functional theory calculations confirm that the difference is fundamental and not an artifact of packing forces.     

Supramolecular interactions in a copper(II) 4′‐(4‐bromophenyl)‐2,2′:6′,2′′‐terpyridine complex

The title compound, [4′‐(4‐bromophenyl)‐2,2′:6′,2′′‐terpyridine]chlorido(trifluoromethanesulfonato)copper(II), [Cu(CF₃O₃S)Cl(C₂₁H₁₄BrN₃)], is a new copper complex containing a polypyridyl‐based ligand. The Cu^II centre is five‐coordinated in a square‐pyramidal manner by one substituted 2,2′:6′,2′′‐terpyridine ligand, one chloride ligand and a coordinated trifluoromethanesulfonate anion. The Cu—N bond lengths differ by 0.1 Å for the peripheral and central pyridine rings [2.032 (2) (mean) and 1.9345 (15) Å, respectively]. The presence of the trifluoromethanesulfonate anion coordinated to the metal centre allows Br...F halogen–halogen interactions, giving rise to the formation of a dimer about an inversion centre. This work also demonstrates that the rigidity of the ligand allows the formation of other types of nonclassical interactions (C—H...Cl and C—H...O), yielding a three‐dimensional network.     

Structural and theoretical characterization of a new twisted 4′‐substituted terpyridine compound: 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine

4′‐Substituted derivatives of 2,2′:6′,2′′‐terpyridine with N‐containing heteroaromatic substituents, such as pyridyl groups, might be able to coordinate metal centres through the extra N‐donor atom, in addition to the chelating terpyridine N atoms. The incorporation of these peripheral N‐donor sites would also allow for the diversification of the types of noncovalent interactions present, such as hydrogen bonding and π–π stacking. The title compound, C₂₄H₁₆N₄, consists of a 2,2′:6′,2′′‐terpyridine nucleus (tpy), with a pendant isoquinoline group (isq) bound at the central pyridine (py) ring. The tpy nucleus deviates slightly from planarity, with interplanar angles between the lateral and central py rings in the range 2.24 (7)–7.90 (7)°, while the isq group is rotated significantly [by 46.57 (6)°] out of this planar scheme, associated with a short H_tpy…H_isq contact of 2.32 Å. There are no strong noncovalent interactions in the structure, the main ones being of the π–π and C—H…π types, giving rise to columnar arrays along [001], further linked by C—H…N hydrogen bonds into a three‐dimensional supramolecular structure. An Atoms In Molecules (AIM) analysis of the noncovalent interactions provided illuminating results, and while confirming the bonding character for all those interactions unquestionable from a geometrical point of view, it also provided answers for some cases where geometric parameters are not informative, in particular, the short H_tpy…H_isq contact of 2.32 Å to which AIM ascribed an attractive character.     

The chemistry of phenalenium system—II 7,8,2′,3′,4′,5′-Hexachloro-11-methoxy-6H-cyclopenta[a]pyrene-6-spiro-1′-cyclopenta-2′,4′-diene

7,8,2′,3′,4′,5′-Hexachloro-11-methoxy-6H-cyclopenta[a]pyrene-6-spiro-1′-cyclopenta-2′,4′-diene 5 has been obtained by the reaction of phenalenone and 1,2,3,4-tetrachlorocyclopentadiene. The gross structure of 5 has been determined by the X-ray analysis. The ground-state properties of 5were discussed from the spectroscopic data, dipole moment and bond lengths.     

2,3,3′,6‐Tetra‐O‐acetyl‐4,1′,6′‐trichloro‐4,1′,4′,6′‐tetradeoxygalactosucrose

At 160 K, one of the Cl atoms in the furanoid moiety of 3‐O‐acetyl‐1,6‐di­chloro‐1,4,6‐tri­deoxy‐β‐d ‐fructo­furan­osyl 2,3,6‐tri‐O‐acetyl‐4‐chloro‐4‐deoxy‐α‐d ‐galacto­pyran­oside, C₂₀H₂₇­Cl₃O₁₁, is disordered over two orientations, which differ by a rotation of about 107° about the parent C—C bond. The conformation of the core of the mol­ecule is very similar to that of 3‐O‐acetyl‐1,4,6‐tri­chloro‐1,4,6‐tri­deoxy‐β‐d ‐tagato­furanos­yl 2,3,6‐tri‐O‐acetyl‐4‐chloro‐4‐deoxy‐α‐d ‐galacto­pyran­oside, particularly with regard to the conformation about the glycosidic linkage.     

Synthesis of 4′-Phenylflavones

In order to study the relationship between structure and activity of flavones, several new 4′-phenylflavones, 4′-phenylflavonols, and 4′-phenylflavanones are synthesized by cyclization of corresponding 4-phenyl-2′-hydroxychalcones with selenium dioxide in hot amyl alcohol, with hydrogen peroxide in cold alkalic ethanol, or with phosphoric acid in hot ethanol, respectively. The 4-phenyl-2′-hydroxychalcones are synthesized by condensation of p-phenylbenzaldehyde with various 2′-hydroxyacetophenones in hot methanol under presence of potassium hydroxide.     

Synthesis of 2‐(sulfamoylphenyl)‐4′‐(iminoaryl/hetroaryl)‐4‐(4′′‐hydroxyphenyl)‐thiazoles and their O‐glucosides

In continuation of our work, we synthesized 2‐(sulfamoylphenyl)‐4′‐amino‐4‐(4″‐hydroxyphenyl)‐thiazole ( 3a ), which were reacted with various (aryl/hetroaryl) aldehyde to form 2‐(sulfamoylphenyl)‐4′‐(iminoaryl/hetroaryl)‐4‐(4″‐hydroxyphenyl)‐thiazoles ( 4a , 4b , 4c , 4d , 4e , 4f ). Glucosylation of compounds ( 4a , 4b , 4c , 4d , 4e , 4f ) have been done by using acetobromoglucose as a glucosyl donor to afford 2‐(sulfamoylphenyl)‐4′‐(iminoaryl/hetroaryl)‐4‐(2,3,4,6‐tetra‐O‐acetyl‐4″‐O‐β‐D ‐glucosidoxyphenyl)‐thiazoles ( 5a , 5b , 5c , 5d , 5e , 5f ), further on deacetylation to produce 2‐(sulfamoylphenyl)‐4′‐(iminoaryl/hetroaryl)‐4‐(4″‐O‐β‐D ‐glucosidoxyphenyl)‐thiazoles ( 6a , 6b , 6c , 6d , 6e , 6f ). The compounds are confirmed by FTIR, ¹H‐NMR, ¹³C‐NMR, and ES‐Mass spectral analysis. J. Heterocyclic Chem., (2011).     

Angiotensin-II Analogues. I: Synthesis and incorporation of the halogenated amino acids 3-(4′-iodophenyl)alanine, 3-(3′,5′-dibromo-4′-chlorophenyl)alanine, 3-(3′,4′,5′-tribromophenyl)alanine,and 3-(2′,3′,4′,5′,6′-pentabromophenyl)alanine

The synthesis of the polyhalogenated phenylalanines Phe(3′,4′,5′-Br₃) ( 3 ), Phe(3′,5′-Br₂-4′-Cl) ( 4 ) and DL -Phe (2′,3′,4′,5′,6′-Br₅) ( 9 ) is described. The trihalogenated phenylalanines 3 and 4 are obtained stereospecifically from Phe(4′-NH₂) by electrophilic bromination followed by Sandmeyer reaction. The most hydrophobic amino acid 9 is synthesized from pentabromobenzyl bromide and a glycine analogue by phase-transfer catalysis. With the amino acids 4, 9 , Phe(4′-I) and D -Phe, analogues of [1-sarcosin]angiotensin II ([Sar¹]AT) are produced for structure-activity studies and tritium incorporation. The diastereomeric pentabromo peptides L - and D - 13 are separated by HPLC. and identified by catalytic dehalogenation and comparison to [Sar¹]AT ( 10 ) and [Sar¹, D -Phe⁸]AT ( 14 ).     

Poly[[tetrachlorido{μ4‐tetrakis[(pyridin‐4‐yl)oxymethyl]methane‐κ4N:N′:N′′:N′′′}dizinc(II)] dimethylformamide tetrasolvate]

A novel metal–organic framework, {[Zn₂Cl₄(C₂₅H₂₄N₄O₄)]·4C₃H₇NO}_n, has been synthesized solvothermally by assembling the semi‐rigid tetrahedral ligand tetrakis[(pyridin‐4‐yl)oxymethyl]methane (tpom) and zinc nitrate in dimethylformamide (DMF). The crystal structure is noncentrosymmetric (P2₁c). Each Zn^II cation has a tetrahedral coordination environment (C₂ symmetry), which is formed by two chloride ligands and two pyridine N atoms from two tpom ligands. The tetrahedral tetradentate tpom linker has a quaternary C atom located on the crystallographic axis. This linker utilizes all the peripheral pyridine N atoms to connect four Zn^II cations, thereby forming a wave‐like two‐dimensional sheet along the c axis. The two‐dimensional layer can be topologically simplified as a typical uninodal 4‐connected sql/Shubnikov net, which is represented by the Schläfli symbol {4⁴,6²}. Adjacent layers are further packed into a three‐dimensional structure by C—H...Cl hydrogen bonds.     

Some reactions of 4-[(2′,3′-diphenyl-6′-methoxy-5′-benzofuranyl)-methylene]- and 4-[(2′,3′-diphenyl-5′-methoxy-6′-benzofuranyl)-methylene]-2-phenyloxazolin-5-one

2,3-Diphenyl-5-formyl-6-methoxybenzofuran was reacted with hippuric acid to give 4-[(2′,3′-diphenyl-6′-methoxy-5′-benzofuranyl)methylene]-2-phenyloxazolin-5-one. The above mentioned oxazolone yielded 2,3-diphenyl-6-methoxybenzofuranylacetic acid by reaction with hydrazine hydrate, nitrous acid, benzene followed by acid hydrolysis. The reactions of the oxazolone with hydroxylamine hydrochloride and primary or secondary amines were also investigated.