Fe-Ni合金/Ni铁氧体复合纳米纤维的制备、表征与磁性能研究

采用静电纺丝结合氢气热还原法制备了一系列平均直径约为60～70 nm的Fe-Ni合金/Ni铁氧体复合纳米纤维. 使用热重-差热分析、X射线衍射、扫描电镜、透射电镜、选区电子衍射和振动样品磁强计等技术对前驱体纤维的热分解行为以及目标产物的晶体结构、相组成、形貌和磁性能进行了表征. 结果显示, Ni铁氧体纳米纤维的制备温度及其还原温度对相应还原产物的相组成和磁性能有着显著的影响; 所得Fe-Ni合金/Ni铁氧体复合纳米纤维由于Fe-Ni合金的引入表现出更为优良的磁性能, 且各磁性相间存在良好的交换耦合, 其整体磁行为如同一个单相磁性材料. 在复合纳米纤维磁性能上所观察的变化可根据Fe-Ni合金和Ni铁氧体内禀磁特性的不同以及晶粒尺寸、相组成和磁相互作用的变化来进行解释.     

溶剂热法合成碳纳米材料

本文综述了溶剂热法合成多种碳纳米管、纳米电缆、纳米棒、纳米球和纳米空心锥的研究现状。350 ℃下用金属钾还原六氯代苯,在用不同催化剂时,可分别得到碳纳米管和碳球,碳球的形成可以解释为石墨层的微条卷曲而成。600 ℃下金属镁还原乙醇得到了竹节状和Y-型碳纳米管。500 ℃下还原四氯化碳和碳酸钠可得到平均直径为100 nm的碳纳米管。700 ℃下金属锌还原乙醚制成了左右螺旋型交织的碳纳米管。在硫的存在下,200 ℃以下二茂铁热解成非晶碳纳米管和Fe/非晶碳纳米同轴电缆。     

MOF热解法制备Ni/C核壳材料及其催化苯乙炔加氢性能研究

通过水热合成法以硝酸镍和2,5-二羟基对苯二甲酸为原料成功合成Ni-MOF-74.以此为前体,在Ar气氛下热解制备了一系列介孔结构丰富、尺寸均匀的纳米Ni/C核壳催化剂.Ar气氛下通过延长热解时间（400℃,6 h）或提高热解温度（≥500℃）可以得到完全热解产物,粒子尺寸随热解温度的升高而增大.H₂-TPR结果表明随着热解温度的提高,镍与表面碳层之间的相互作用增强,材料还原性能降低.TEM和Ar离子溅射XPS给出了Ni/C纳米材料为核壳结构的直接证据.由于表面碳层的化学惰性,隔离作用和电子调控作用,使得部分镍物种能够以单质镍（Ni⁰）形式稳定存在.其次,表面碳壳的存在减弱了颗粒间的相互作用,有利于催化剂在反应体系中均匀分散.以苯乙炔选择加氢反应为探针,在高压釜式反应器中测试Ni/C的催化性能.研究发现Ni/C在苯乙炔加氢反应中表现出了非常优异的催化活性（0.833 mmol•min^-1•g_cat.^-1）和稳定性.其与几种催化剂的加氢活性由弱到强的顺序为：Ni < NiSi_x < 负载型Ni₂Si < Ni/C < Pd < Pt.     

激光法连续制备纳米FeNi合金及其乙醇溶胶研究

采用脉冲激光轰击浸于流动乙醇中转动的FeNi合金固体靶连续制备得到纳米FeNi乙醇溶胶及其纳米合金. 能谱扫描测得纳米FeNi合金粒子Fe与Ni元素重量比约为66︰34; TEM观察纳米FeNi粒子初始粒径约为1~5 nm, 并随放置时间延长聚集长大; XRD显示纳米FeNi合金基本为非晶态; 荧光光谱发现纳米FeNi合金溶胶在311.00 nm处有一强的激发峰以及在273.00和347.00 nm处的二个弱激发峰, 以311.00 nm作为激发波长得到位于418.00 nm处的一强荧光光谱峰; UV-vis表明纳米FeNi合金溶胶在230.00 nm左右有一个含有一组可分辨的9个细峰的强吸收峰和一个位于275.00 nm处的弱激子吸收峰; FT-IR发现纳米FeNi/乙醇溶胶中乙醇缔合态羟基的伸缩振动吸收峰(υ_O-H)明显蓝移, 并且证实获得的纳米FeNi合金粒子表面在制备过程中为乙醇裂解产生的碳氢有机基团所修饰.     

废FCC催化剂与高炉灰催化木屑热解特性研究

将炼油废FCC催化剂(sFCCc)和炼钢高炉灰(BFA)两种典型工业废弃物作为催化剂应用于木屑快速热解过程中,探究了400-700℃木屑的催化热解反应特性。结果表明,两种催化剂均促进了液相产物向气相产物的转化,700℃、BFA催化条件下的气相产率最高为52.60%。sFCCc在500-600℃时具有更强的脱氧活性,气体产物中CO和CO₂产量更高。BFA在600-700℃时具有更高的缩聚脱氢活性,催化生成了更大量的多环芳香类化合物和H₂。热解油主要由酚类物质组成,sFCCc促进了甲氧基酚向苯二酚类物质转化。热解油FT-IR解析结果表明,sFCCc促进了C-O和C=O的脱除,导致酸类和酯类化合物减少,CO₂产率增加。     

温度对松木屑气化液体产物组成的影响

利用傅里叶变换红外光谱(FT-IR)和气质联用(GC/MS)技术,研究了松木屑在400~900℃气化液体产物的主要组成成分和液体产物主要化学组成的来源与转化随气化温度变化的规律。结果表明,松木屑低温气化液体产物主要为酮、呋喃和愈创木酚等含氧化合物。随气化温度升高,液体产物的组成发生显著变化,400~ 500℃主要发生愈创木酚向酚类化合物的转变,500~600℃主要发生酮、呋喃向酚类化合物的转变,600~700℃主要发生酚类向茚和PAHs (多环芳烃)的转变,700~900℃主要发生酚类化合物向PAHs的转变,900℃液体产物的组成为大分子量的PAHs。     

CuZnAl水滑石衍生催化剂上甲醇水蒸气重整制氢Ⅰ. 催化剂焙烧温度的影响

 以类层柱CuZnAl水滑石为前体,经不同温度焙烧制备了一系列甲醇水蒸气重整制氢催化剂. 在250 ℃、 水/甲醇比1.3和重时空速2.5 h-1下的反应结果表明, 600 ℃焙烧的催化剂具有优异的活性和稳定性,而≤500 ℃和≥700 ℃焙烧后的催化剂活性较差. 热重、 X射线衍射、 傅里叶变换红外光谱和程序升温还原分析结果表明, 600 ℃焙烧时水滑石分解较为完全,析出纳米CuO粒子的同时伴生CuAl2O4尖晶石相,进而在反应过程中对金属Cu纳米粒子和ZnO起到良好的隔离和稳定作用. 焙烧温度≥700 ℃时CuO纳米粒子发生二次团聚,同时CuAl2O4尖晶石相大量生成,造成催化活性位减少,活性较低; 而焙烧温度≤500 ℃时水滑石分解不完全,生成 (Cu,Zn)AlxOy(CO3)z复合物且无尖晶石相伴生,造成反应中金属Cu纳米粒子和ZnO聚集,导致催化剂活性较低.     

化学还原和超临界CO_2干燥制备的Fe-Ni纳米合金的催化性能研究

采用液相化学还原法结合超临界CO2萃取干燥技术,制备了Fe-Ni纳米合金,并考察了不同条件下Fe-Ni纳米合金催化KBH4碱溶液水解析氢的效果。结果表明,Fe-Ni纳米合金对KBH4水解析氢具有优异的催化性能,析氢产率为100%,析氢速率随pH的增大而降低,当pH为8～9时析氢速率最高;较好的干燥条件是在10MPa和5℃干燥20min。     

木质纤维类生活垃圾热解过程矿物质和碳结构的演化规律

使用水平管式炉,在不同热解温度(500~1 000 ℃)条件下对废纸屑和樟树叶两种木质纤维类生活垃圾进行了热解实验,分别采用X射线衍射(XRD)和拉曼光谱研究了样品所含矿物质和碳结构随热解温度的变化。结果表明,废纸屑和樟树叶含有的主要矿物分别为方解石和草酸钙,在500 ℃之前草酸钙全部转化为方解石,焦样中的方解石在800 ℃以后逐渐分解并形成生石灰。拉曼光谱对生活垃圾焦的碳结构变化非常敏感,低温热解时生活垃圾的大分子结构发生缩合和解聚,产生了孤立sp²碳原子,导致峰参数D1峰半高宽和峰面积比值I_D1/I_G逐渐增大;高温热解时晶体sp²碳原子增多,导致D1峰半高宽和I_D1/I_G逐渐减小。焦样的碳结构有序度随热解温度升高先降低后提高。     

钴掺杂的磁性氧化铁纳米粒子的可控合成

通过油酸盐前驱体高温热解法制备出大小均匀的钴掺杂四氧化三铁球形纳米粒子, 其钴/铁摩尔比可以通过调节油酸钴与油酸铁的比例进行调变. 当产物中钴/铁摩尔比从0.024增加到0.156, 所制备的氧化铁纳米粒子的饱和磁矩从39 emu·g^-1逐渐减小到30 emu·g^-1, 而矫顽力从0 Oe升至190 Oe. 在305℃下, 随着反应体系的热解时间由0.5 h 增加到3 h, 所制备出的氧化铁纳米粒子尺寸逐渐由7 nm增加到14 nm. 热解时间较短时, 以高价态的四氧化三铁的晶型为主, 辅之以少量的氧化亚铁; 热解时间增加至2 h, 产物的晶型为四氧化三铁和氧化亚铁的复合物; 而继续增加热解时间至3 h, 除四氧化三铁和氧化亚铁之外, 还出现少量的零价态的CoFe合金, 说明铁(钴)元素经历了由三价到二价, 最后被还原为零价的过程. 随着反应温度的升高, 产物的尺寸逐渐增大, 同时产物中氧化亚铁的含量增多.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

钒与糖代谢及糖尿病

微量元素钒作为生物体内必需元素，经证实有很重要的生理学功能，与机体糖代谢有十分密切的关系，且能降低糖尿病动物模型的高血糖，极有可能被开发为治疗糖尿病的药物。     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Synthesis of Tyrosol and Hydroxytyrosol Glycofuranosides and Their Biochemical and Biological Activities in Cell-Free and Cellular Assays

Tyrosol (T) and hydroxytyrosol (HOT) and their glycosides are promising candidates for applications in functional food products or in complementary therapy. A series of phenylethanoid glycofuranosides (PEGFs) were synthesized to compare some of their biochemical and biological activities with T and HOT. The optimization of glycosylation promoted by environmentally benign basic zinc carbonate was performed to prepare HOT α-L-arabino-, β-D-apio-, and β-D-ribofuranosides. T and HOT β-D-fructofuranosides, prepared by enzymatic transfructosylation of T and HOT, were also included in the comparative study. The antioxidant capacity and DNA-protective potential of T, HOT, and PEGFs on plasmid DNA were determined using cell-free assays. The DNA-damaging potential of the studied compounds for human hepatoma HepG2 cells and their DNA-protective potential on HepG2 cells against hydrogen peroxide were evaluated using the comet assay. Experiments revealed a spectrum of different activities of the studied compounds. HOT and HOT β-D-fructofuranoside appear to be the best-performing scavengers and protectants of plasmid DNA and HepG2 cells. T and T β-D-fructofuranoside display almost zero or low scavenging/antioxidant activity and protective effects on plasmid DNA or HepG2 cells. The results imply that especially HOT β-D-fructofuranoside and β-D-apiofuranoside could be considered as prospective molecules for the subsequent design of supplements with potential in food and health protection.     

Ferrocene and ferrocenium modified clays and their styrene and EVA composites

In this work, ferrocene- and ferrocenium-containing salts were employed to modify montmorillonite. X-ray measurements show an increase in the interlayer spacing upon clay modification, which means that the larger and more organophilic cations were inserted into the gallery space of montmorillonite. Attempts to prepare nanocomposites of polystyrene and ethylene vinyl acetate copolymers lead to immiscible systems; the morphology of these systems was elucidated with TEM, XRD and cone calorimetry. The thermal stability of the composites is greater than that of the virgin polymer.