Theoretical study of isomerization and decomposition of propenal

We investigated the dynamics of isomerization and multi-channel dissociation of propenal (CH(2)CHCHO), methyl ketene (CH(3)CHCO), hydroxyl propadiene (CH(2)CH(2)CHOH), and hydroxyl cyclopropene (cyclic-C(3)H(3)-OH) in the ground potential-energy surface using quantum-chemical calculations. Optimized structures and vibrational frequencies of molecular species were computed with method B3LYP∕6-311G(d,p). Total energies of molecules at optimized structures were computed at the CCSD(T)∕6-311+G(3df,2p) level of theory. We established the potential-energy surface for decomposition to CH(2)CHCO + H, CH(2)CH + HCO, CH(2)CH(2)∕CH(3)CH + CO, CHCH∕CH(2)C + H(2)CO, CHCCHO∕CH(2)CCO + H(2), CHCH + CO + H(2), CH(3) + HCCO, CH(2)CCH + OH, and CH(2)CC∕cyclic-C(3)H(2) + H(2)O. Microcanonical rate coefficients of various reactions of trans-propenal with internal energies 148 and 182 kcal mol(-1) were calculated using Rice-Ramsperger-Kassel-Marcus and Variational transition state theories. Product branching ratios were derivable using numerical integration of kinetic master equations and the steady-state approximation. The concerted three-body dissociation of trans-propenal to fragments C(2)H(2) + CO + H(2) is the prevailing channel in present calculations. In contrast, C(3)H(3)O + H, C(2)H(3) + HCO and C(2)H(4) + CO were identified as major channels in the photolysis of trans-propenal. The discrepancy between calculations and experiments in product branching ratios indicates that the three major photodissociation channels occur mainly on an excited potential-energy surface whereas the other channels occur mainly on the ground potential-energy surface. This work provides profound insight in the mechanisms of isomerization and multichannel dissociation of the system C(3)H(4)O.     

Photodissociation dynamics of ketene at 157.6 nm

Photodissociation dynamics of ketene at 157.6 nm has been investigated using the photofragment translational spectroscopic technique based on photoionization detection using vacuum-ultraviolet synchrotron radiation. Three dissociation channels have been observed: CH2+CO, CH+HCO, and HCCO+H. The product translational energy distributions and angular anisotropy parameters were measured for all three observed dissociation channels, and the relative branching ratios for different channels were also estimated. The experimental results show that the direct C-C bond cleavage (CH2+CO) is the dominant channel, while H migration and elimination channels are very minor. The results in this work show that direct dissociation on excited electronic state is much more significant than the indirect dissociation via the ground state in the ketene photodissociation at 157.6 nm.     

193-nm photodissociation of acryloyl chloride to probe the unimolecular dissociation of CH2CHCO radicals and CH2CCO

The work presented here uses photofragment translational spectroscopy to investigate the primary and secondary dissociation channels of acryloyl chloride (CH2==CHCOCl) excited at 193 nm. Three primary channels were observed. Two C-Cl fission channels occur, one producing fragments with high kinetic recoil energies and the other producing fragments with low translational energies. These channels produced nascent CH2CHCO radicals with internal energies ranging from 23 to 66 kcal/mol for the high-translational-energy channel and from 50 to 68 kcal/mol for the low-translational-energy channel. We found that all nascent CH2CHCO radicals were unstable to CH2CH + CO formation, in agreement with the G3//B3LYP barrier height of 22.4 kcal/mol to within experimental and computational uncertainties. The third primary channel is HCl elimination. All of the nascent CH2CCO coproducts were found to have enough internal energy to dissociate, producing CH2C: + CO, in qualitative agreement with the G3//B3LYP barrier of 39.5 kcal/mol. We derive from the experimental results an upper limit of 23 +/- 3 kcal/mol for the zero-point-corrected barrier to the unimolecular dissociation of the CH2CHCO radical to form CH2CH + CO.     

New mechanistic insights to the O(3P) + propene reaction from multiplexed photoionization mass spectrometry

The reaction of O((3)P) with propene (C(3)H(6)) has been examined using tunable vacuum ultraviolet radiation and time-resolved multiplexed photoionization mass spectrometry at 4 Torr and 298 K. The temporal and isomeric resolution of these experiments allow the separation of primary from secondary reaction products and determination of branching ratios of 1.00, 0.91 ± 0.30, and 0.05 ± 0.04 for the primary product channels CH(3) + CH(2)CHO, C(2)H(5) + HCO, and H(2) + CH(3)CHCO, respectively. The H + CH(3)CHCHO product channel was not observable for technical reasons in these experiments, so literature values for the branching fraction of this channel were used to convert the measured product branching ratios to branching fractions. The results of the present study, in combination with past experimental and theoretical studies of O((3)P) + C(3)H(6), identify important pathways leading to products on the C(3)H(6)O potential energy surface (PES). The present results suggest that up to 40% of the total product yield may require intersystem crossing from the initial triplet C(3)H(6)O PES to the lower-lying singlet PES.     

Photodissociation dynamics of formyl fluoride (HFCO) at 193 nm: branching ratios and distributions of kinetic energy

Following photodissociation of formyl fluoride (HFCO) at 193 nm, we detected products with fragmentation translational spectroscopy utilizing a tunable vacuum ultraviolet beam from a synchrotron for ionization. Among three primary dissociation channels observed in this work, the F-elimination channel HFCO-->HCO+F dominates, with a branching ratio approximately 0.66 and an average release of kinetic energy approximately 55 kJ mol(-1); about 17% of HCO further decomposes to H+CO. The H-elimination channel HFCO-->FCO+H has a branching ratio approximately 0.28 and an average release of kinetic energy approximately 99 kJ mol(-1); about 21% of FCO further decomposes to F+CO. The F-elimination channel likely proceeds via the S1 surface whereas the H-elimination channel proceeds via the T1 surface; both channels exhibit moderate barriers for dissociation. The molecular HF-elimination channel HFCO-->HF+CO, correlating with the ground electronic surface, has a branching ratio of only approximately 0.06; the average translational release of 93 kJ mol(-1), approximately 15% of available energy, implies that the fragments are highly internally excited. Detailed mechanisms of photodissociation are discussed.     

Photodissociation dynamics of 1,2-butadiene at 157 nm

Photodissociation dynamics of 1,2-butadiene at 157 nm has been investigated using a molecular beam apparatus based on photoionization using vacuum ultraviolet synchrotron radiation. Six dissociation pathways have been observed. The observed channels are C4H5+H, C4H4+H2, C3H3+CH3, C2H3+C2H3, C2H4+C2H2, and C4H4+H+H. Among all the dissociation channels, the C3H3+CH3 channel is found to be the dominant process. The product kinetic energy distributions of all dissociation channels have been determined from simulating the experimental time-of-flight spectra. Relative branching ratios for all observed dissociation channels were also estimated based on all detected products.     

Photofragment translational spectroscopy of 1,3-butadiene and 1,3-butadiene-1,1,4,4-d(4) at 193 nm

The photodissociation dynamics of 1,3-butadiene at 193 nm have been investigated with photofragment translational spectroscopy coupled with product photoionization using tunable VUV synchrotron radiation. Five product channels are evident from this study: C(4)H(5) + H, C(3)H(3) + CH(3), C(2)H(3) + C(2)H(3), C(4)H(4) + H(2), and C(2)H(4) + C(2)H(2). The translational energy (P(E(T))) distributions suggest that these channels result from internal conversion to the ground electronic state followed by dissociation. To investigate the dissociation dynamics in more detail, further studies were carried out using 1,3-butadiene-1,1,4,4-d(4). Branching ratios were determined for the channels listed above, as well as relative branching ratios for the isotopomeric species produced from 1,3-butadiene-1,1,4,4-d(4) dissociation. C(3)H(3) + CH(3) is found to be the dominant channel, followed by C(4)H(5) + H and C(2)H(4) + C(2)H(2), for which the yields are approximately equal. The dominance of the C(3)H(3) + CH(3) channel shows that isomerization to 1,2-butadiene followed by dissociation is facile.     

Dynamics of the O(3P) + C2H4 reaction: identification of five primary product channels (vinoxy, acetyl, methyl, methylene, and ketene) and branching ratios by the crossed molecular beam technique with soft electron ionization

The crossed molecular beam scattering technique with soft electron ionization (EI) is used to disentangle the complex dynamics of the polyatomic O(3P) + C2H4 reaction, which is of great relevance in combustion and atmospheric chemistry. Exploiting the newly developed capability of attaining universal product detection by using soft EI, at a collision energy of 54.0 kJ mol(-1), five different primary products have been identified, which correspond to the five exoergic competing channels leading to CH2CHO(vinoxy) + H, CH3CO(acetyl) + H, CH3(methyl) + HCO(formyl), CH2(methylene) + HCHO(formaldehyde), and CH2CO(ketene) + H2. From laboratory product angular and velocity distributions, center-of-mass product angular and translational energy distributions and the relative branching ratios for each channel have been obtained, affording an unprecedented characterization of this important reaction.     

Comparison of two-body and three-body decomposition of ethanedial, propanal, propenal, n-butane, 1-butene, and 1,3-butadiene

We investigated two-body (binary) and three-body (triple) dissociations of ethanedial, propanal, propenal, n-butane, 1-butene, and 1,3-butadiene on the ground potential-energy surfaces using quantum-chemical and Rice-Ramsperger-Kassel-Marcus calculations; most attention is paid on the triple dissociation mechanisms. The triple dissociation includes elimination of a hydrogen molecule from a combination of two separate terminal hydrogen atoms; meanwhile, the rest part simultaneously decomposes to two stable fragments, e.g., C(2)H(4), C(2)H(2), or CO. Transition structures corresponding to the concerted triple dissociation were identified using the B3LYP/6-311G(d,p) level of theory and total energies were computed using the method CCSD(T)/6-311+G(3df, 2p). The forward barrier height of triple dissociation has a trend of ethanedial < propanal < propenal < n-butane < 1-butene < 1,3-butadiene, pertaining to the reaction enthalpy. Ratios of translational energies of three separate fragments could be estimated from the transition structure of triple dissociation. The synchronous concerted dissociation of propanal, propenal, and 1-butene leading to three different types of molecular fragments by breaking nonequivalent chemical bonds is rare. The triple dissociation of propanal, n-butane, 1-butene, and 1,3-butadiene were investigated for the first time. To outline a whole picture of dissociation mechanisms, some significant two-body dissociation channels were investigated for the calculations of product branching ratios. The triple dissociation plays an important role in the three carbonyl compounds, but plays a minor or negligible role in the three hydrocarbons.     

Photodissociation pathways of 1,1-dichloroacetone

We present a comprehensive investigation of the dissociation dynamics following photoexcitation of 1,1-dichloroacetone (CH(3)COCHCl(2)) at 193 nm. Two major dissociation channels are observed: cleavage of a C-Cl bond to form CH(3)C(O)CHCl + Cl and elimination of HCl. The branching between these reaction channels is roughly 9:1. The recoil kinetic energy distributions for both C-Cl fission and HCl elimination are bimodal. The former suggests that some of the radicals are formed in an excited electronic state. A portion of the CH(3)C(O)CHCl photoproducts undergo secondary dissociation to give CH(3) + C(O)CHCl. Photoelimination of Cl(2) is not a significant product channel. A primary C-C bond fission channel to give CH(3)CO + CHCl(2) may be present, but this signal may also be due to a secondary dissociation. Data from photofragment translational spectroscopy with electron impact and photoionization detection, velocity map ion imaging, and UV-visible absorption spectroscopy are presented, along with G3//B3LYP calculations of the bond dissociation energetics.     

Determination of the CH + O2 product channels

The multichannel CH + O2 reaction was studied at room temperature, in a low-pressure fast-flow reactor. CH radical was obtained from the reaction of CHBr3 with potassium atoms. The overall rate constant was determined from the decay of CH with distance, O2 being introduced in excess. The result, after corrections for axial and radial diffusion, is k = (3.6 +/- 0.5) x 10(-11) cm3 molecule-1 s-1. The OH(A2 sigma +) chemiluminescence was observed, confirming the existence of the OH + CO channel. The vibrational population distribution of OH(A2 sigma +) is 32% in the v' = 1 level and 68% in the v' = 0 level (+/- 5%). The relative atomic concentrations were determined by resonance fluorescence in the vacuum ultraviolet. A ratio of 1.4 +/- 0.2 was found between the H atom density (H atoms being produced from the H + CO2 channel and from the HCO dissociation) and the O atom density (O + HCO). Ab initio calculations of the transition structures have been performed, associated with statistical estimations. The estimated branching ratios are: O + HCO, 20%; O + H + CO, 30%; H + CO2, 30%; and CO + OH, 20%.     

Probing the barrier for CH2CHCO --> CH2CH + CO by the velocity map imaging method

This work determines the dissociation barrier height for CH2CHCO --> CH2CH + CO using two-dimensional product velocity map imaging. The CH2CHCO radical is prepared under collision-free conditions from C-Cl bond fission in the photodissociation of acryloyl chloride at 235 nm. The nascent CH2CHCO radicals that do not dissociate to CH2CH + CO, about 73% of all the radicals produced, are detected using 157-nm photoionization. The Cl(2P(3/2)) and Cl(2P(1/2)) atomic fragments, momentum matched to both the stable and unstable radicals, are detected state selectively by resonance-enhanced multiphoton ionization at 235 nm. By comparing the total translational energy release distribution P(E(T)) derived from the measured recoil velocities of the Cl atoms with that derived from the momentum-matched radical cophotofragments which do not dissociate, the energy threshold at which the CH2CHCO radicals begin to dissociate is determined. Based on this energy threshold and conservation of energy, and using calculated C-Cl bond energies for the precursor to produce CH2CHC*O or C*H2CHCO, respectively, we have determined the forward dissociation barriers for the radical to dissociate to vinyl + CO. The experimentally determined barrier for CH2CHC*O --> CH2CH + CO is 21+/-2 kcal mol(-1), and the computed energy difference between the CH2CHC*O and the C*H2CHCO forms of the radical gives the corresponding barrier for C*H2CHCO --> CH2CH + CO to be 23+/-2 kcal mol(-1). This experimental determination is compared with predictions from electronic structure methods, including coupled-cluster, density-functional, and composite Gaussian-3-based methods. The comparison shows that density-functional theory predicts too low an energy for the C*H2CHCO radical, and thus too high a barrier energy, whereas both the Gaussian-3 and the coupled-cluster methods yield predictions in good agreement with experiment. The experiment also shows that acryloyl chloride can be used as a photolytic precursor at 235 nm of thermodynamically stable CH2CHC*O radicals, most with an internal energy distribution ranging from approximately 3 to approximately 21 kcal mol(-1). We discuss the results with respect to the prior work on the O(3P) + propargyl reaction and the analogous O(3P) + allyl system.     

Ab initio energies and product branching ratios for the O+C3H6 reaction

Intermediate and transition-state energies have been calculated for the O+C3H6 (propene) reaction using the compound ab initio CBS-QB3 and G3 methods in combination with density functional theory. The lowest-lying triplet and singlet potential energy surfaces of the O-C3H6 system were investigated. RRKM statistical theory was used to predict product branching fractions over the 300-3000 K temperature and 0.001-760 Torr pressure ranges. The oxygen atom adds to the C3H6 terminal olefinic carbon in the primary step to generate a nascent triplet biradical, CH3CHCH2O. On the triplet surface, unimolecular dissociation of CH3CHCH2O to yield H+CH3CHCHO is favored over the entire temperature range, although the competing H2CO+CH3CH product channel becomes significant at high temperature. Rearrangement of triplet CH3CHCH2O to CH3CH2CHO (propanal) via a 1,2 H-atom shift has a barrier of 122.3 kJ mol(-1), largely blocking this reaction channel and any subsequent dissociation products. Intersystem crossing of triplet CH3CHCH2O to the singlet surface, however, leads to facile rearrangement to singlet CH3CH2CHO, which dissociates via numerous product channels. Pressure was found to have little influence over the branching ratios under most conditions, suggesting that the vibrational self-relaxation rates for p相似文献   

Direct versus Hydrogen‐Assisted CO Dissociation on the Fe (100) Surface: a DFT Study

CO dissociation: Three most probable pathways to CO dissociation on the Fe?(100) surface exist: a) direct, CO→C+O (-) and H-assisted b) H+CO?HCO→CH+O (-) or c) CO+H?COH→C+OH (-). Under high hydrogen pressure conditions and highly occupied surfaces the formation of HCO and subsequent dissociation to CH+O may at best compete with direct dissociation.     

Experimental and theoretical studies of the reactions Y (a2D) + H2CO and Y (a2D) + CH3CHO

The reactions of ground state Y (a(2)D) with H(2)CO and CH(3)CHO were studied at a range of collision energies in crossed molecular beams. For reaction with H(2)CO, three product channels were observed: formation of YH(2) + CO, YCO + H(2), and YHCO + H. Reaction with CH(3)CHO led to three analogous product channels involving formation of HYCH(3) + CO, YCH(2)CO + H(2), and YCH(3)CO + H. The calculated CCSD(T) energetics and DFT geometries for key intermediates in both reactions, together with RRKM theory, are used to calculate a priori the branching ratios between various product channels. These calculated values are compared to those obtained experimentally.     

An ab initio/RRKM study of product branching ratios in the photodissociation of buta-1,2- and -1,3-dienes and but-2-yne at 193 nm

Ab initio G2M(MP2)//B3LYP/6-311G** calculations have been performed to investigate the reaction mechanism of photodissociation of buta-1,2- and -1,3-dienes and but-2-yne after their internal conversion into the vibrationally hot ground electronic state. The detailed study of the potential-energy surface was followed by microcanonical RRKM calculations of energy-dependent rate constants for individual reaction steps (at 193 nm photoexcitation and under collision-free conditions) and by solution of kinetic equations aimed at predicting the product branching ratios. For buta-1,2-diene, the major dissociation channels are found to be the single Cbond;C bond cleavage to form the methyl and propargyl radicals and loss of hydrogen atoms from various positions to produce the but-2-yn-1-yl (p1), buta-1,2-dien-4-yl (p2), and but-1-yn-3-yl (p3) isomers of C(4)H(5). The calculated branching ratio of the CH(3) + C(3)H(3)/C(4)H(5) + H products, 87.9:5.9, is in a good agreement with the recent experimental value of 96:4 (ref. 21) taking into account that a significant amount of the C(4)H(5) product undergoes secondary dissociation to C(4)H(4) + H. The isomerization of buta-1,2-diene to buta-1,3-diene or but-2-yne appears to be slower than its one-step decomposition and plays only a minor role. On the other hand, the buta-1,3-diene-->buta-1,2-diene, buta-1,3-diene-->but-2-yne, and buta-1,3-diene-->cyclobutene rearrangements are significant in the dissociation of buta-1,3-diene, which is shown to be a more complex process. The major reaction products are still CH(3) + C(3)H(3), formed after the isomerization of buta-1,3-diene to buta-1,2-diene, but the contribution of the other radical channels, C(4)H(5) + H and C(2)H(3) + C(2)H(3), as well as two molecular channels, C(2)H(2) + C(2)H(4) and C(4)H(4) + H(2), significantly increases. The overall calculated C(4)H(5) + H/CH(3) + C(3)H(3)/C(2)H(3) + C(2)H(3)/C(4)H(4) + H(2)/C(2)H(2) + C(2)H(4) branching ratio is 24.0:49.6:4.6:6.1:15.2, which agrees with the experimental value of 20:50:8:2:2022 within 5 % margins. For but-2-yne, the one-step decomposition pathways, which include mostly H atom loss to produce p1 and, to a minor extent, molecular hydrogen elimination to yield methylethynylcarbene, play an approximately even role with that of the channels that involve the isomerization of but-2-yne to buta-1,2- or -1,3-dienes. p1 + H are the most important reaction products, with a branching ratio of 56.6 %, followed by CH(3) + C(3)H(3) (23.8 %). The overall C(4)H(5) + H/CH(3) + C(3)H(3)/C(2)H(3) + C(2)H(3)/C(4)H(4) + H(2)/C(2)H(2) + C(2)H(4) branching ratio is predicted as 62.0:23.8:2.5:5.7:5.6. Contrary to buta-1,2- and -1,3-dienes, photodissociation of but-2-yne is expected to produce more hydrogen atoms than methyl radicals. The isomerization mechanisms between various isomers of the C(4)H(6) molecule including buta-1,2- and -1,3-dienes, but-2-yne, 1-methylcyclopropene, dimethylvinylidene, and cyclobutene have been also characterized in detail.     

Dissociation of energy-selected c-C2H4S+ in a region 10.6-11.8 eV: threshold photoelectron-photoion coincidence experiments and quantum-chemical calculations

Dissociation of energy-selected c-C2H4S+ was investigated in a region of 10.6-11.8 eV with a threshold photoelectron-photoion coincidence technique and a synchrotron as a source of vacuum ultraviolet radiation. Branching ratios and average releases of kinetic energy in channels of formation of c-C2H4S+, CH3CS+, and HCS+ were obtained from well-resolved time-of-flight peaks in coincidence mass spectra. Measured average releases of kinetic energy for channel CH3CS+ + H of least energy are substantial and much greater than calculated with quasiequilibrium theory; in contrast, small releases of kinetic energy near the appearance onset for channel HCS+ + CH3 agree satisfactorily with statistical calculations. Calculations of molecular electronic structures and energetics of c-C2H4S+ and C2H3S+ isomers and various fragments and transition states were also performed with Gaussian 3 method to establish dissociation mechanisms. A predicted dissociation energy of 11.05 eV for c-C2H4S --> HCS+ + CH3 agrees with a linearly extrapolated threshold at 10.99+/-0.04 eV and a predicted dissociation mechanism that c-C2H4S+ isomerizes to CH3CHS+ before dissociating to HCS+ + CH3 supports the experimental results. The large releases of kinetic energy for channel CH3CS+ + H might result from a dissociation mechanism according to which c-C2H4S+ isomerizes to a local minimum CH3CSH+ and then dissociates through a transition state to form CH3CS+ + H.     

Product branching from the CH2CH2OH radical intermediate of the OH + ethene reaction

Using a crossed laser-molecular beam scattering apparatus and tunable photoionization detection, these experiments determine the branching to the product channels accessible from the 2-hydroxyethyl radical, the first radical intermediate in the addition reaction of OH with ethene. Photodissociation of 2-bromoethanol at 193 nm forms 2-hydroxyethyl radicals with a range of vibrational energies, which was characterized in our first study of this system ( J. Phys. Chem. A 2010 , 114 , 4934 ). In this second study, we measure the relative signal intensities of ethene (at m/e = 28), vinyl (at m/e = 27), ethenol (at m/e = 44), formaldehyde (at m/e = 30), and acetaldehyde (at m/e = 44) products and correct for the photoionization cross sections and kinematic factors to determine a 0.765:0.145:0.026:0.063:<0.01 branching to the OH + C(2)H(4), H(2)O + C(2)H(3), CH(2)CHOH + H, H(2)CO + CH(3), and CH(3)CHO + H product asymptotes. The detection of the H(2)O + vinyl product channel is surprising when starting from the CH(2)CH(2)OH radical adduct; prior studies had assumed that the H(2)O + vinyl products were solely from the direct abstraction channel in the bimolecular collision of OH and ethene. We suggest that these products may result from a frustrated dissociation of the CH(2)CH(2)OH radical to OH + ethene in which the C-O bond begins to stretch, but the leaving OH moiety abstracts an H atom to form H(2)O + vinyl. We compare our experimental branching ratio to that predicted from statistical microcanonical rate constants averaged over the vibrational energy distribution of our CH(2)CH(2)OH radicals. The comparison suggests that a statistical prediction using 1-D Eckart tunneling underestimates the rate constants for the branching to the product channels of OH + ethene, and that the mechanism for the branching to the H(2)O + vinyl channel is not adequately treated in such theories.     

Unimolecular dissociation of the CH3OCO radical: an intermediate in the CH3O + CO reaction

This work investigates the unimolecular dissociation of the methoxycarbonyl, CH(3)OCO, radical. Photolysis of methyl chloroformate at 193 nm produces nascent CH(3)OCO radicals with a distribution of internal energies, determined by the velocities of the momentum-matched Cl atoms, that spans the theoretically predicted barriers to the CH(3)O + CO and CH(3) + CO(2) product channels. Both electronic ground- and excited-state radicals undergo competitive dissociation to both product channels. The experimental product branching to CH(3) + CO(2) from the ground-state radical, about 70%, is orders of magnitude larger than Rice-Ramsperger-Kassel-Marcus (RRKM)-predicted branching, suggesting that previously calculated barriers to the CH(3)OCO --> CH(3) + CO(2) reaction are dramatically in error. Our electronic structure calculations reveal that the cis conformer of the transition state leading to the CH(3) + CO(2) product channel has a much lower barrier than the trans transition state. RRKM calculations using this cis transition state give product branching in agreement with the experimental branching. The data also suggest that our experiments produce a low-lying excited state of the CH(3)OCO radical and give an upper limit to its adiabatic excitation energy of 55 kcal/mol.     

Photodissociation dynamics of vinyl fluoride (CH2CHF) at 157 and 193 nm: Distributions of kinetic energy and branching ratios

Using photofragment translational spectroscopy and tunable vacuum-ultraviolet ionization, we measured the time-of-flight spectra of fragments upon photodissociation of vinyl fluoride (CH2CHF) at 157 and 193 nm. Four primary dissociation pathways--elimination of atomic F, atomic H, molecular HF, and molecular H2--are identified at 157 nm. Dissociation to C2H3 + F is first observed in the present work. Decomposition of internally hot C2H3 and C2H2F occurs spontaneously. The barrier heights of CH2CH --> CHCH + H and cis-CHCHF --> CHCH + F are evaluated to be 40+/-2 and 44+/-2 kcal mol(-1), respectively. The photoionization yield spectra indicate that the C2H3 and C2H2F radicals have ionization energies of 8.4+/-0.1 and 8.8+/-0.1 eV, respectively. Universal detection of photoproducts allowed us to determine the total branching ratios, distributions of kinetic energy, average kinetic energies, and fractions of translational energy release for all dissociation pathways of vinyl fluoride. In contrast, on optical excitation at 193 nm the C2H2 + HF channel dominates whereas the C2H3 + F channel is inactive. This reaction C2H3F --> C2H2 + HF occurs on the ground surface of potential energy after excitation at both wavelengths of 193 and 157 nm, indicating that internal conversion from the photoexcited state to the electronic ground state of vinyl fluoride is efficient. We computed the electronic energies of products and the ionization energies of fluorovinyl radicals.