Isomerism in rhodium(I) N,S-donor heteroscorpionates: ring substituent and ancillary ligand effects

The heteroscorpionate ligands [HB(taz)(2)(pz(R))](-) (pz(R) = pz, pz(Me2), pz(Ph)) and [HB(taz)(pz)(2)](-), synthesised from the appropriate potassium hydrotris(pyrazolyl)borate salt and 4-ethyl-3-methyl-5-thioxo-1,2,4-triazole (Htaz), react with [{Rh(cod)(μ-Cl)}(2)] to give [Rh(cod)Tx] {Tx = HB(taz)(2)(pz), HB(taz)(2)(pz(Me2)), HB(taz)(2)(pz(Ph)), HB(taz)(pz)(2)}; the heteroscorpionate rhodaboratrane [Rh{B(taz)(2)(pz(Me2))}{HB(taz)(2)(pz(Me2))}] is the only isolable product from the reaction of [{Rh(nbd)(μ-Cl)}(2)] with K[HB(taz)(2)(pz(Me2))]. Carbonylation of the cod complexes gave a mixture of [Rh(CO)(2)Tx] and [(RhTx)(2)(μ-CO)(3)] which reacts with PR(3) to give [Rh(CO)(PR(3))Tx] (R = Cy, NMe(2), Ph, OPh). In the solid state the complexes are square planar with the particular structure dependent on the steric and/or electronic properties of the scorpionate and ancillary ligands. The complex [Rh(cod){HB(taz)(pz)(2)}] has the heteroscorpionate κ(2)[N(2)]-coordinated to rhodium with the B-H bond directed away from the rhodium square plane while [Rh(cod){HB(taz)(2)(pz(Me2))}] is κ(2)[SN]-coordinated, with the B-H bond directed towards the metal. The complexes [Rh(CO)(PPh(3)){HB(taz)(2)(pz)}] and [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Me2))}] are also κ(2)[SN]-coordinated but with the pyrazolyl ring cis to PPh(3); in the former the B-H bond is directed towards rhodium while in the latter the ring is pseudo-parallel to the rhodium square plane, as also found for [Rh(CO)(2){HB(taz)(2)(pz(Me2))}]. The analogues [Rh(CO)(PR(3)){HB(taz)(2)(pz(Me2))}] (R = Cy, NMe(2)) have the phosphines trans to the pyrazolyl ring. Uniquely, [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Ph))}] is κ(2)[S(2)]-coordinated. A qualitative mechanism is given for the rapid ring-exchange, and hence isomerisation, observed in solution.     

The oxidative conversion of the N,S-bridged complexes [{RhLL'(μ-X)}2] to [(RhLL')3)(μ-X)2]+ (X = mt or taz): a comparison with the oxidation of N,N-bridged analogues

The structures of [{RhLL'(μ-X)}(2)] [LL' = cod, (CO)(2), (CO)(PPh(3)) or {P(OPh)(3)}(2); X = mt or taz], prepared from [{RhLL'(μ-Cl)}(2)] and HX in the presence of NEt(3), depend on the auxiliary ligands LL'. The head-to-tail arrangement of the two N,S-bridges is accompanied by a rhodium-eclipsed conformation for the majority but the most hindered complex, [{Rh[P(OPh)(3)](2)(μ-taz)}(2)], uniquely adopts a sulfur-eclipsed structure. The least hindered complex, [{Rh(CO)(2)(μ-mt)}(2)], shows intermolecular stacking of mt rings in the solid state. The complexes [{RhLL'(μ-X)}(2)] are chemically oxidised to trinuclear cations, [(RhLL')(3)(μ-X)(2)](+), most probably via reaction of one molecule of the dimer, in the sulfur-eclipsed form, with the fragment [RhLL'](+) formed by oxidative cleavage of a second.     

Syntheses of Cationic, Six-Coordinate Cadmium(II) Complexes Containing Tris(pyrazolyl)methane Ligands. Influence of Charge on Cadmium-113 NMR Chemical Shifts

Treating a thf (thf = tetrahydrofuran) suspension of Cd(acac)(2) (acac = acetylacetonate) with 2 equiv of HBF(4).Et(2)O results in the immediate formation of [Cd(2)(thf)(5)](BF(4))(4) (1). Crystallization of this complex from thf/CH(2)Cl(2) yields [Cd(thf)(4)](BF(4))(2) (2), a complex characterized in the solid state by X-ray crystallography. Crystal data: monoclinic, P2(1)/n, a = 7.784(2) ?, b = 10.408(2) ?, c = 14.632(7) ?, beta = 94.64(3) degrees, V = 1181.5(6) ?(3), Z = 2, R = 0.0484. The geometry about the cadmium is octahedral with a square planar arrangement of the thf ligands and a fluorine from each (BF(4))(-) occupying the remaining two octahedral sites. Reactions of [Cd(2)(thf)(5)](BF(4))(4) with either HC(3,5-Me(2)pz)(3) or HC(3-Phpz)(3) yield the dicationic, homoleptic compounds {[HC(3,5-Me(2)pz)(3)](2)Cd}(BF(4))(2) (3) and {[HC(3-Phpz)(3)](2)Cd}(BF(4))(2) (4) (pz = 1-pyrazolyl). The solid state structure of 3 has been determined by X-ray crystallography. Crystal data: rhombohedral, R&thremacr;, a = 12.236(8) ?, c = 22.69(3) ?, V = 2924(4) ?(3), Z = 3, R = 0.0548. The cadmium is bonded to the six nitrogen donor atoms in a trigonally distorted octahedral arrangement. Four monocationic, mixed ligand tris(pyrazolyl)methane-tris(pyrazolyl)borate complexes {[HC(3,5-Me(2)pz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (5), {[HC(3,5-Me(2)pz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (6), {[HC(3-Phpz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (7), and {[HC(3-Phpz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (8) are prepared by appropriate conproportionation reactions of 3or 4 with equimolar amounts of the appropriate homoleptic neutral tris(pyrazolyl)borate complexes [HB(3,5-Me(2)pz)(3)](2)Cd or [HB(3-Phpz)(3)](2)Cd. Solution (113)Cd NMR studies on complexes 3-8 demonstrate that the chemical shifts of the new cationic, tris(pyrazolyl)methane complexes are very similar to the neutral tris(pyrazolyl)borate complexes that contain similar substitution of the pyrazolyl rings.     

Coordination features of a hybrid scorpionate/phosphane ligand exemplified with Iridium

Although the pentacoordinated complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(cod)] (1; pz=pyrazolyl, cod=1,5-cyclooctadiene), isolated from the reaction of [{Ir(mu-Cl)(cod)}(2)] with [Li(tmen)][B(allyl)(CH(2)PPh(2))- (pz)(2)] (tmen=N,N,N',N'-tetramethylethane-1,2-diamine), shows behavior similar to that of the related hydridotris(pyrazolyl)borate complex, the carbonyl derivatives behave in a quite different way. On carbonylation of 1, the metal--metal-bonded complex [(Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}CO)(2)(mu-CO)] (2) that results has a single ketonic carbonyl bridge. This bridging carbonyl is labile such that upon treatment of 2 with PMe(3) the pentacoordinated Ir(I) complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PMe(3))] (3) was isolated. Complex 3 shows a unique fac coordination of the hybrid ligand with the allyl group eta(2)-bonded to the metal in the equatorial plane of a distorted trigonal bipyramid with one pyrazolate group remaining uncoordinated. This unusual feature can be rationalized on the basis of the electron-rich nature of the metal center. The related complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PPh(3))] (4) was found to exist in solution as a temperature-dependent equilibrium between the cis-pentacoordinated and trans square planar isomers with respect to the phosphorus donor atoms. Protonation of 3 with different acids is selective at the iridium center and gives the cationic hydrides [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PMe(3))]X (X=BF(4) (5), MeCO(2) (6), and Cl (7)). Complex 7 further reacts with HCl to generate the unexpected product [Ir(CO)Cl{(Hpz)B(CH(2)PPh(2))(pz)CH(2)CH(Me)}(PMe(3))]Cl (9; Hpz=protonated pyrazolyl group) formed by the insertion of the hydride into the Ir-(eta(2)-allyl) bond. In contrast, protonation of complex 4 with HCl stops at the hydrido complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PPh(3))]Cl (8). X-ray diffraction studies carried out on complexes 2, 3, and 9 show the versatility of the hybrid scorpionate ligand in its coordination.     

蝎型钒氧苯甲酸配合物的合成、结构及量化计算

设计合成了两种以聚吡唑硼酸盐、苯甲酸为配体的钒氧配合物VO[HB(pz)3](pzH)(C6H5COO)(1)和VO[HB(3,5-Me2pz)3](3,5-Me2pzH)(C6H5COO)(2)((HB(pz)3: 聚吡唑硼酸钠盐; pzH: 吡唑; HB(3,5-Me2pz)3: 聚甲基吡唑硼酸钠盐; 3,5-Me2pzH: 3,5-二甲基吡唑). 通过元素分析、红外光谱和X射线单晶衍射方法对配合物进行了表征. 并结合从头计算结果进一步分析了配合物的稳定性及分子中配键的共价特征. 分析结果表明, 配合物2的稳定性大于配合物1, 中心钒原子周围的价键类型都属于共价键范畴, 键序分析结果与晶体结构测定的键长结果是一致的.     

Hydride mobility in trinuclear sulfido clusters with the core [Rh3(μ-H)(μ3-S)2]: molecular models for hydrogen migration on metal sulfide hydrotreating catalysts

The treatment of [{Rh(μ-SH){P(OPh)(3)}(2)}(2)] with [{M(μ-Cl)(diolef)}(2)] (diolef=diolefin) in the presence of NEt(3) affords the hydrido-sulfido clusters [Rh(3)(μ-H)(μ(3)-S)(2)(diolef){P(OPh)(3)}(4)] (diolef=1,5-cyclooctadiene (cod) for 1, 2,5-norbornadiene (nbd) for 2, and tetrafluorobenzo[5,6]bicyclo[2.2.2]octa-2,5,7-triene (tfb) for 3) and [Rh(2)Ir(μ-H)(μ(3)-S)(2)(cod){P(OPh)(3)}(4)] (4). Cluster 1 can be also obtained by treating [{Rh(μ-SH){P(OPh)(3)}(2)}(2)] with [{Rh(μ-OMe)(cod)}(2)], although the main product of the reaction with [{Ir(μ-OMe)(cod)}(2)] was [RhIr(2)(μ-H)(μ(3)-S)(2)(cod)(2){P(OPh)(3)}(2)] (5). The molecular structures of clusters 1 and 4 have been determined by X-ray diffraction methods. The deprotonation of a hydrosulfido ligand in [{Rh(μ-SH)(CO)(PPh(3))}(2)] by [M(acac)(diolef)] (acac=acetylacetonate) results in the formation of hydrido-sulfido clusters [Rh(3)(μ-H)(μ(3)-S)(2)(CO)(2) (diolef)(PPh(3))(2)] (diolef=cod for 6, nbd for 7) and [Rh(2)Ir(μ-H)(μ(3)-S)(2)(CO)(2)(cod)(PPh(3))(2)] (8). Clusters 1-3 and 5 exist in solution as two interconverting isomers with the bridging hydride ligand at different edges. Cluster 8 exists as three isomers that arise from the disposition of the PPh(3) ligands in the cluster (cis and trans) and the location of the hydride ligand. The dynamic behaviour of clusters with bulky triphenylphosphite ligands, which involves hydrogen migration from rhodium to sulfur with a switch from hydride to proton character, is significant to understand hydrogen diffusion on the surface of metal sulfide hydrotreating catalysts.     

Mononuclear and binuclear sandwich copper(II) complexes with poly(pyrazolyl)borate ligands: syntheses, structures and properties

A series of Cu(II) complexes Cu(2)[micro-pz](2)[HB(pz)(3)](2) (1), Cu[H(2)B(pz)(2)](2) (2), Cu[HB(pz)(3)](2) (3), Cu[HB(pz(Me2))(3)](2) (4), Cu[B(pz)(4)](2) (5) (pz=pyrazole), have been synthesized and characterized by elemental analysis, IR, UV-vis, X-ray diffraction, thermal analysis and theoretical analysis. The IR spectra give the Cu-N vibration modes at 322, 366, 344, 387, and 380 cm(-1) in complexes 1-5, respectively. The UV spectra show all the complexes have same UV absorption at 232 nm; there is another band at 332 nm for complexes 1, 2 and 4, while for complexes 3 and 5, the bands are at 272 and 308 nm, respectively. Complex 1 has a binuclear structure in which two pyrazole ligands bridge two Cu-Tp units. In 2-5, the Cu(II) centers are coordinated with dihydrobis(pyrazolyl)borate (Bp), hydrotris(pyrazolyl)borate (Tp), hydrotris(3,5-Me2pyrazolyl)borate (Tp'), tetrakis(pyrazolyl)borate (Tkp) respectively to form a mononuclear structure. The results of thermal analysis for complexes 1-5 are discussed too.     

新型钒卤代过氧化物酶模型化合物的合成结构及仿生催化活性

模拟卤代过氧化物酶活性中心钒的配位环境设计合成了新的蝎型聚吡唑硼酸盐钒氧化合物VO(HB(3,5-Me<,2> pz)<,3>)(3,5-Me<,2>pz)(HOOCCH<,2>CH<,2>COO)(1)和VO(HB(3,5-Me<,2>pz)<,3>)(3,5-Me<,2> pz)(C<,5>H<,4>NCOO)(2...     

Rhenium complexes of tris(pyrazolyl)methanes and sulfonate derivative

The trioxo [ReO(3){SO(3)C(pz)(3)}] (1) (pz = pyrazolyl) and oxo [ReOCl{SO(3)C(pz)(3)}(PPh(3))]Cl (2) compounds with tris(pyrazolyl)methanesulfonate were obtained by treatment of Re(2)O(7) or [ReOCl(3)(PPh(3))(2)], respectively, with Li[SO(3)C(pz)(3)], whereas [ReCl(3){HC(pz)(3)}] (3), [ReCl(3){HC(3,5-Me(2)pz)(3)}] (4) and [ReCl(4){eta(2)-HC(pz)(3)}] (5) were prepared by reaction of [ReOCl(3)(PPh(3))(2)] (3,4) or [ReCl(4)(NCMe)(2)] (5) with hydrotris(pyrazolyl)methane HC(pz)(3) (3,5) or hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me(2)pz)(3) (4). [ReO{SO(3)C(pz)(3)}{OC(CH(3))(2)pz}][ReO(4)] 6, with a chelated pyrazolyl-alkoxide, was derived from an unprecedented ketone-pyrazolyl coupling on reaction of crude 1 with acetone. The compounds have been characterized by elemental analyses, IR and NMR spectroscopies, FAB-MS spectrometry and cyclic voltammetry and, in the case of 5 and 6, also by single-crystal X-ray diffraction. The electrochemical E(L) Lever parameter has been estimated, for the first time, for the SO(3)C(pz)(3)(-) and oxo ligands allowing the measurement of their electron-donor character and comparison with other ligands. Compounds 1, 2 and 6 appear to be the first tris(pyrazolyl)methanesulfonate complexes of rhenium to be reported.     

Unusual reactivity of tris(pyrazolyl)borate zirconium benzyl complexes

The synthesis and reactivity of [Tp*Zr(CH2Ph)2][B(C6F5)4] (2, Tp* = HB(3,5-Me2pz)3, pz = pyrazolyl) have been explored to probe the possible role of Tp'MR2+ species in group 4 metal Tp'MCl3/MAO olefin polymerization catalysts (Tp' = generic tris(pyrazolyl)borate). The reaction of Tp*Zr(CH2Ph)3 (1) with [Ph3C][B(C6F5)4] in CD2Cl2 at -60 degrees C yields 2. 2 rearranges rapidly to [{(PhCH2)(H)B(mu-Me2pz)2}Zr(eta2-Me2pz)(CH2Ph)][B(C6F5)4] (3) at 0 degrees C. Both 2 and 3 are highly active for ethylene polymerization and alkyne insertion. Reaction of 2 with excess 2-butyne yields the double insertion product [Tp*Zr(CH2Ph)(CMe=CMeCMe=CMeCH2Ph)][B(C6F5)4] (4). Reaction of 3 with excess 2-butyne yields [{(PhCH2)(H)B(mu-Me2pz)2}Zr(Cp*)(eta2-Me2pz)][B(C6F5)4] (6, Cp* = C5Me5) via three successive 2-butyne insertions, intramolecular insertion, chain walking, and beta-Cp* elimination.     

Solid-state (67)zn NMR spectroscopy in bioinorganic chemistry. Spectra of four- and six-coordinate zinc pyrazolylborate complexes obtained by management of proton relaxation rates with a paramagnetic dopant

Solid-state (67)Zn NMR spectra of model compounds for metalloproteins, such as [H(2)B(3,5-Me(2)pz)(2)](2)Zn (pz denotes pyrazolyl ring), have been obtained using low temperatures (10 K) to enhance the Boltzmann factor in combination with cross polarization (CP) from (1)H to (67)Zn. Attempts to observe spectra of other model compounds, such as [H(2)B(pz)(2)](2)Zn, were hindered by long relaxation times of the protons. To decrease the proton relaxation times, the high-spin six-coordinate complex [HB(3,4,5-Me(3)pz)(3)](2)Fe has been investigated as a dopant. NMR and EPR measurements have shown that this Fe(II) dopant effectively reduces the (1)H spin lattice relaxation time, T(1), of the zinc samples in the temperature range 5-10 K with minimal perturbations of the (1)H spin lattice relaxation time in the rotating frame, T(1)(rho). Using this methodology, we have determined the (67)Zn NMR parameters of four- and six-coordinate zinc(II) poly(pyrazolyl)borate complexes that are useful models for systems of biological importance. The (67)Zn NMR parameters are contrasted to the corresponding changes in the (113)Cd NMR parameters for the analogous compounds. Further, these investigations have demonstrated that a temperature-dependent phase transition occurs in the neighborhood of 185 K for [HB(3,5-Me(2)pz)(3)](2)Zn; the other poly(pyrazolyl)borate complexes we investigated did not show this temperature-dependent behavior. This conclusion is confirmed by a combination of room-temperature high-field (18.8 T) solid-state (67)Zn NMR spectroscopy and low-temperature X-ray methods. The utilization of paramagnetic dopants should enable low-temperature cross polarization experiments to be performed on a wide variety of nuclides that are important in bioinorganic chemistry, for example, (25)Mg, (43)Ca, and (67)Zn.     

A homoleptic hydrotris(methimazolyl)borate complex of titanium

The reaction of [Ti(2)(micro-Cl)(2)(thf)(2)(eta-C(8)H(8))(2)] with Na[HB(mt)(3)] (mt = methimazolyl) provides the unusual salt [Ti{HB(mt)(3)}(2)][TiCl(4)(thf)(2)], the cation of which features homoleptic Ti(III)S(6) coordination.     

Oxidative Coordination versus C3−C(O)Me Bond Cleavage in Acetylacetonate Iridium Complexes

Iridabicycles [Ir{κ³-N,C,O-(pyC(H)=C(C(O)Me)₂}(Cl)(L−L)](L−L=cod (cod=1,5-cyclooctadiene), 1 a ; bipy (bipy=2,2’-bipyridine), 1 b ) have been obtained by oxidative coordination of 3-(pyridine-2-yl-methylene)pentane-2,4-dione L1 , to the complexes [{Ir(μ-Cl)(cod)}₂] and [{Ir(μ-Cl)(coe)₂}₂] (coe=cis-cyclooctene), the latter in the presence of bipy. Remarkably, cleavage of the C³−C(O)Me bond of L1 has instead been achieved in the reaction with [Ir(Cl)(dmb)₂] (dmb=2,3-dimethylbutadiene), yielding a compound formulated as [Ir{κ²-N,C-(pyC(H)C(C(O)Me))}(CO)(μ-Cl)(Me)]₂, 2 . Treatment of dimer 2 with DMSO or PMe₃ produced the complexes[Ir{κ²-N,C-(pyC(H)C(C(O)Me)}(CO)Cl(Me)L] (L=DMSO, 3 a ; PMe₃, 3 b ). Plausible mechanisms for the reactions leading to complexes 1 and 2 are proposed by means of DFT calculations.     

Carbophosphazene-supported ligand systems containing pyrazole/guanidine coordinating groups

Carbophosphazene-based coordination ligands [{NC(NMe(2))}(2){NP(3,5-Me(2)Pz)(2)}] (1), [{NC(NEt)(2)}{NC(3,5-Me(2)Pz)}{NP(3,5-Me(2)Pz)(2)}] (2), [NC(3,5-Me(2)Pz)](2)[NP(3,5-Me(2)Pz)(2)] (3), [{NCCl}(2){NP(NC(NMe(2))(2))(2)}] (4), and [{NC(p-OC(5)H(4)N)}(2){NP(NC(NMe(2))(2))(2)}] (5) were synthesized and structurally characterized. In these compounds, the six-membered C(2)N(3)P ring is perfectly planar. The reaction of 1 with CuCl(2) afforded [{NC(NMe(2))}(2){NHP(O)(3,5-Me(2)Pz)}·{Cu(3,5-Me(2)PzH)(2)(Cl)}][Cl] (6). The ligand binds to Cu(II) utilizing the geminal [P(O)(3,5-Me(2)Pz)] coordinating unit. Similarly, the reaction of 2 with PdCl(2) afforded, after a metal-assisted P-N hydrolysis, [{NC(NEt)(2)}{NC(3,5-Me(2)Pz)}{NP(O)(3,5-Me(2)Pz)}·{Pd(3,5-Me(2)PzH)(Cl)}] (7). In the latter, the [P(O)(3,5-Me(2)Pz)] unit does not coordinate; in this instance, the Pd(II) is bound by a ring nitrogen atom and a carbon-tethered pyrazolyl nitrogen atom. The reaction of 3 with PdCl(2) also results in P-N bond hydrolysis affording [{NC(3,5-Me(2)Pz)(2)}{NP(O)(3,5-Me(2)Pz)}{Pd(Cl)}] (8). In contrast to 7, however, in 8, the Pd(II) elicits a nongeminal η(3) coordination from the ligand involving two carbon-tethered pyrazolyl groups and a ring nitrogen atom. Metalated products could not be isolated in the reaction of 3 with K(2)PtCl(4). Instead, a P-O-P bridged carbodiphosphazane dimer, [{NC(3,5-Me(2)Pz)NHC(3,5-Me(2)Pz)}{NP(O)}](2) (9), was isolated as the major product. Finally, the reaction of 5 with PdCl(2) resulted in [{NC(OC(5)H(4)N)}(2){NP(NC(NMe(2))(2))(2)}·{PdCl(2)}] (10). In the latter, the exocyclic P-N bonds are quite robust and are involved in binding to the metal ion. Compounds 6-10 have been characterized by a variety of techniques including X-ray crystallography. In all of the compounds, the bond parameters of the inorganic heterocyclic rings are affected by metalation.     

Synthesis and catalytic properties of molybdenum(VI) complexes with tris(3,5-dimethyl-1-pyrazolyl)methane

The complex [MoO(2)Cl{HC(3,5-Me(2)pz)(3)}]BF(4) (1) (HC(3,5-Me(2)pz)(3) = tris(3,5-dimethyl-1-pyrazolyl)methane) has been prepared and examined as a catalyst for epoxidation of olefins at 55 °C using tert-butyl hydroperoxide (TBHP) as the oxidant. For reaction of cis-cyclooctene, epoxycyclooctane is obtained quantitatively within 5 h when water is rigorously excluded from the reaction mixture. Increasing amounts of water in the reaction mixture lead to lower activities (without affecting product selectivity) and transformation of 1 into the trioxidomolybdenum(VI) complex [{HC(3,5-Me(2)pz)(3)}MoO(3)] (4). Complex 4 was isolated as a microcrystalline solid by refluxing a suspension of 1 in water. The powder X-ray diffraction pattern of 4 can be indexed in the orthorhombic Pnma system, with a = 16.7349(5) ?, b = 13.6380(4) ?, and c = 7.8513(3) ?. Treatment of 1 in dichloromethane with excess TBHP led to isolation of the symmetrical [Mo(2)O(4)(μ(2)-O){HC(3,5-Me(2)pz)(3)}(2)](BF(4))(2) (2) and unsymmetrical [Mo(2)O(3)(O(2))(2)(μ(2)-O)(H(2)O){HC(3,5-Me(2)pz)(3)}] (3) oxido-bridged dimers, which were characterized by single-crystal X-ray diffraction. Complex 2 displays the well-known (Mo(2)O(5))(2+) bridging structure where each dioxidomolybdenum(VI) center is coordinated to three N atoms of the organic ligand and one μ(2)-bridging O atom. The unusual complex 3 comprises dioxido and oxidodiperoxo molybdenum(VI) centers linked by a μ(2)-bridging O atom, with the former center being coordinated to the tridentate N-ligand. The dinuclear complexes exhibit a similar catalytic performance to that found for mononuclear 1. For complexes 1 and 2 use of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate and N-butyl-3-methylpyridinium tetrafluoroborate as solvents allowed the complexes to be completely dissolved, and in each case the catalyst and IL could be recycled and reused without loss of activity.     

Solid state and solution structures of rhodium and iridium poly(pyrazolyl)borate diene complexes

The structures adopted by a range of poly(pyrazolyl)borate complexes [ML2Tp(x)] [M = Rh, Ir; L2 = diene; Tp(x) = Bp' {dihydrobis(3,5-dimethylpyrazolyl)borate}, Tp' {hydrotris(3,5-dimethylpyrazolyl)borate}, Tp {hydrotris(pyrazolyl)borate}, B(pz)4 {tetrakis(pyrazolyl)borate}] have been investigated. Low steric hindrance between ligands in [Rh(eta-nbd)Tp] (nbd = norbornadiene), [Rh(eta-cod)Tp] (cod = cycloocta-1,5-diene) and [Rh(eta-nbd)Tp'] results in K3 coordination of the pyrazolylborate but [M(eta-cod)Tp'] (M = Rh, Ir) are kappa2 coordinated with the free pyrazolyl ring positioned above and approximately parallel to the square plane about the metal. All but the most sterically hindered Tp(x) complexes undergo fast exchange of the coordinated and uncoordinated pyrazolyl rings on the NMR spectroscopic timescale. For [Rh(eta-cod){B(pz)4}], [Rh(eta-dmbd)Tp'] (dmbd = 2,3-dimethylbuta-1,3-diene) and [Rh(eta-cod)Tp(Ph)] {Tp(Ph) = hydrotris(3-phenylpyrazolyl)borate} the fluxional process is slowed at low temperatures so that inequivalent pyrazolyl rings are observed. The bonding modes of the Tp' ligand (but not of other pyrazolylborate ligands) can be determined by 11B NMR and IR spectroscopy. The 11B chemical shifts (for a series of Tp' complexes) show the general pattern, kappa3 < -7.5 ppm < kappa2 and the nu(BH) stretch kappa3 > 2500 cm(-1) > kappa2. The electrochemical behaviour of the pyrazolylborate complexes is related to the degree of structural change which occurs on electron transfer. One-electron oxidation of complexes with Tp', Tp and B(pz)4 ligands is generally reversible although that of [Ir(etacod)Tp] is only reversible at higher scan rates and that of [Ir(eta-cod){B(pz)4}] is irreversible. Of the complexes with the more sterically hindered Tp(Ph) ligand, only [Rh(eta-nbd)Tp(Ph)] shows any degree of reversible oxidation. The ESR spectra of a range of Rh(II) complexes show coupling to both 14N and 103Rh nuclei in most cases but what appears to be coupling to rhodium and one hydrogen atom, possibly a hydride ligand, for the oxidation product of [Rh(eta-nbd)Tp(Ph)].     

Acid-induced degradation of phosphorescent dopants for OLEDs and its application to the synthesis of tris-heteroleptic iridium(III) bis-cyclometalated complexes

Investigations of blue phosphorescent organic light emitting diodes (OLEDs) based on [Ir(2-(2,4-difluorophenyl)pyridine)(2)(picolinate)] (FIrPic) have pointed to the cleavage of the picolinate as a possible reason for device instability. We reproduced the loss of picolinate and acetylacetonate ancillary ligands in solution by the addition of Br?nsted or Lewis acids. When hydrochloric acid is added to a solution of a [Ir(C^N)(2)(X^O)] complex (C^N = 2-phenylpyridine (ppy) or 2-(2,4-difluorophenyl)pyridine (diFppy) and X^O = picolinate (pic) or acetylacetonate (acac)), the cleavage of the ancillary ligand results in the direct formation of the chloro-bridged iridium(III) dimer [{Ir(C^N)(2)(μ-Cl)}(2)]. When triflic acid or boron trifluoride are used, a source of chloride (here tetrabutylammonium chloride) is added to obtain the same chloro-bridged iridium(III) dimer. Then, we advantageously used this degradation reaction for the efficient synthesis of tris-heteroleptic cyclometalated iridium(III) complexes [Ir(C^N(1))(C^N(2))(L)], a family of cyclometalated complexes otherwise challenging to prepare. We used an iridium(I) complex, [{Ir(COD)(μ-Cl)}(2)], and a stoichiometric amount of two different C^N ligands (C^N(1) = ppy; C^N(2) = diFppy) as starting materials for the swift preparation of the chloro-bridged iridium(III) dimers. After reacting the mixture with acetylacetonate and subsequent purification, the tris-heteroleptic complex [Ir(ppy)(diFppy)(acac)] could be isolated with good yield from the crude containing as well the bis-heteroleptic complexes [Ir(ppy)(2)(acac)] and [Ir(diFppy)(2)(acac)]. Reaction of the tris-heteroleptic acac complex with hydrochloric acid gives pure heteroleptic chloro-bridged iridium dimer [{Ir(ppy)(diFppy)(μ-Cl)}(2)], which can be used as starting material for the preparation of a new tris-heteroleptic iridium(III) complex based on these two C^N ligands. Finally, we use DFT/LR-TDDFT to rationalize the impact of the two different C^N ligands on the observed photophysical and electrochemical properties.     

113Cd Shielding Tensors of Monomeric Cadmium Compounds Containing Nitrogen Donor Atoms. 3. CP/MAS Studies on Five-Coordinate Cadmium Complexes Having N(3)X(2) (X = H, N, O, and S) Donor Atoms

The principal elements of the (113)Cd shielding tensor for a set of five- coordinate compounds having mixed donor atoms coordinating to the cadmium were determined via CP/MAS NMR experiments. The first complex, [HB(3,5-Me(2)pz)(3)]CdBH(4) (where pz = pyrazolyl), has a CdN(3)H(2) inner coordination sphere. The isotropic chemical shift in the solid state is 355.1 ppm, and its chemical shift anisotropy (CSA, Deltasigma) is -596 ppm with an asymmetry parameter (eta) of 0.64. The second complex, [HB(3,5-Me(2)pz)(3)]Cd[H(2)B(pz)(2)], has five nitrogen donor atoms bonded to the cadmium. This N(5) or N(3)N(2) compound was the only material of this study to manifest dipolar splitting of the cadmium resonance from the quadrupolar (14)N. The isotropic chemical shift, CSA, and the value of eta for this material were therefore determined at higher field where the dipolar splitting was less than the linewidth, yielding values of 226.6 ppm, -247 ppm, and 0.32, respectively. A second N(5) material, [HB(3-Phpz)(3)]Cd[H(2)B(3,5-Me(2)pz)(2)], was also investigated and has an isotropic shift of 190.2 ppm, a CSA of 254 ppm, and an eta of 0.86. Also studied was [HB(3-Phpz)(3)]Cd[(Bu(t)CO)(2)CH], which has an CdN(3)O(2) inner core. The isotropic chemical shift of this complex is 173.6 ppm, and the values of Deltasigma and eta were determined to be -258 ppm and 0.38, respectively. The final compound, [HB(3,5-Me(2)pz)(3)]Cd[S(2)CNEt(2)], with N(3)S(2) donor atoms, has an isotropic shift of 275.8 ppm, an eta of 0.51, and a CSA of +375 ppm. Utilizing previous assignments, the most shielded tensor element was determined to be oriented normal to the plane of the tridentate ligand. The shielding tensor information is used to speculate on the coordination geometry of the CdN(3)O(2) inner core complex.     

Stepwise synthesis of a hydrido, N-heterocyclic dicarbene iridium(III) pincer complex featuring mixed NHC/abnormal NHC ligands

We describe a stepwise synthesis of the hydrido, N-heterocyclic dicarbene iridium(III) pincer complex [Ir(H)I(C(NHC)CC(aNHC))(NCMe)] (3) which features a combination of normal and abnormal NHC ligands. The reaction of the bis(imidazolium) diiodide [(CH(imid)CHCH(imid))]I(2) (1) with [Ir(μ-Cl)(cod)](2) afforded first the mono-NHC Ir(I) complex [IrI(cod)(CH(imid)CHC(NHC))]I (2), which was then reacted with 2 equiv. of Cs(2)CO(3) in acetonitrile at 60 °C for 40 h to yield 3. These observations support our previously proposed mechanism for the formation of hydrido, N-heterocyclic dicarbene iridium(III) pincer complexes from the reaction of bis(imidazolium) salts with weak bases involving a mono-NHC Ir(I) intermediate. We describe the reactivity of the mono-NHC Ir(I) complex 2 under various conditions. By changing the reaction solvent from MeCN to toluene, we observed the cleavage of the imidazol-2-ylidene ring and the formation of an iminoformamide-containing mono-NHC Ir(I) complex [IrI(cod){[NHCH=CHN(Ad)CHO]CHC(NHC)}] (4). Complex 4 was also prepared in high yield from the reaction of 2 with strong bases (potassium tert-butoxide or potassium hexamethyldisilazane), via the initial formation of the complex [IrI(cod)(CH(NHC)CHC(NHC))] (5), which contains a coordinated NHC moiety and a free carbene arm, followed by subsequent hydrolysis of the latter. The bis(imidazolium) salt 1 can be deprotonated by strong bases to form the bis(carbene) ligand C(NHC)CHC(NHC) (6), which readily reacts with [Ir(μ-Cl)(cod)](2) to give the dinuclear complex [{IrI(cod)}(2)(μ-C(NHC)CHC(NHC))] (7), in which the N-heterocyclic bis(carbene) ligand bridges the two metals through the carbene carbon atoms.     

Intervalent Bis(μ‐aziridinato)MII?MI Complexes (M=Rh,Ir): Delocalized Metallo‐Radicals or Delocalized Aminyl Radicals?

Reactions of the methoxo complexes [{M(mu-OMe)(cod)}(2)] (cod=1,5-cyclooctadiene, M=Rh, Ir) with 2,2-dimethylaziridine (Haz) give the mixed-bridged complexes [{M(2)(mu-az)(mu-OMe)(cod)(2)}] [(M=Rh, 1; M=Ir, 2). These compounds are isolated intermediates in the stereospecific synthesis of the amido-bridged complexes [{M(mu-az)(cod)}(2)] (M=Rh, 3; M=Ir, 4). The electrochemical behavior of 3 and 4 in CH(2)Cl(2) and CH(3)CN is greatly influenced by the solvent. On a preparative scale, the chemical oxidation of 3 and 4 with [FeCp(2)](+) gives the paramagnetic cationic species [{M(mu-az)(cod)}(2)](+) (M=Rh, [3](+); M=Ir, [4](+)). The Rh complex [3](+) is stable in dichloromethane, whereas the Ir complex [4](+) transforms slowly, but quantitatively, into a 1:1 mixture of the allyl compound [(eta(3),eta(2)-C(8)H(11))Ir(mu-az)(2)Ir(cod)] ([5](+)) and the hydride compound [(cod)(H)Ir(mu-az)(2)Ir(cod)] ([6](+)). Addition of small amounts of acetonitrile to dichloromethane solutions of [3](+) and [4](+) triggers a fast disproportionation reaction in both cases to produce equimolecular amounts of the starting materials 3 and 4 and metal--metal bonded M(II)--M(II) species. These new compounds are isolated by oxidation of 3 and 4 with [FeCp(2)](+) in acetonitrile as the mixed-ligand complexes [(MeCN)(3)M(mu-az)(2)M(NCMe)(cod)](PF(6))(2) (M=Rh, [8](2+); M=Ir, [9](2+)). The electronic structures of [3](+) and [4](+) have been elucidated through EPR measurements and DFT calculations showing that their unpaired electron is primarily delocalized over the two metal centers, with minor spin densities at the two bridging amido nitrogen groups. The HOMO of 3 and 4 and the SOMO of [3](+) and [4](+) are essentially M--M d-d sigma*-antibonding orbitals, explaining the formation of a net bonding interaction between the metals upon oxidation of 3 and 4. Mechanisms for the observed allylic H-atom abstraction reactions from the paramagnetic (radical) complexes are proposed.