Polymer vesicles formed by amphiphilic diblock copolymers containing a thermotropic liquid crystalline polymer block

New amphiphilic diblock copolymers composed of poly(ethylene glycol) and a thermotropic liquid crystalline polymer have been synthesized and demonstrated to form well-defined unilamellar vesicles in water by cryo-electron microscopy.     

Encapsulation of DNA by cationic diblock copolymer vesicles

Encapsulation of dsDNA fragments (contour length 54 nm) by the cationic diblock copolymer poly(butadiene-b-N-methyl-4-vinyl pyridinium) [PBd-b-P4VPQ] has been studied with phase contrast, polarized light, and fluorescence microscopies, as well as scanning electron microscopy. Encapsulation was achieved with a single emulsion technique. For this purpose, an aqueous DNA solution is emulsified in an organic solvent (toluene) and stabilized by the amphiphilic diblock copolymer. The PBd block forms an interfacial brush, whereas the cationic P4VPQ block complexes with DNA. A subsequent change of the quality of the organic solvent results in a collapse of the PBd brush and the formation of a capsule. Inside the capsules, the DNA is compacted as shown by the appearance of birefringent textures under crossed polarizers and the increase in fluorescence intensity of labeled DNA. The capsules can also be dispersed in an aqueous medium to form vesicles, provided they are stabilized with an osmotic agent [poly(ethylene glycol)] in the external phase. It is shown that the DNA is released from the vesicles once the osmotic pressure drops below 10(5) N/m(2) or if the ionic strength of the supporting medium exceeds 0.1 M. The method has also proven to be efficient to encapsulate pUC18 plasmid in submicrometer-sized vesicles, and the general applicability of the method has been demonstrated by the preparation of the charge inverse system: cationic poly(ethylene imine) encapsulated by the anionic diblock poly(styrene-b-acrylic acid).     

Surfactant boundary lubricant film modified by an amphiphilic diblock copolymer

The effect of the uptake of a low-molecular-weight amphiphilic diblock copolymer on the morphology of didodecyldimethylammonium bromide (DDAB) adsorbed layers on mica, the interactions between two coated surfaces, and the frictional properties of the boundary film have been studied using an atomic force microscope and a dynamic surface forces apparatus nanotribometer. When DDAB-coated surfaces in aqueous solution were compressed, hemifusion or removal of the adsorbed surfactant bilayers could not be induced, and no frictional force could be measured between the surfaces, which display superior lateral cohesion and lubricant properties. Coadsorbing octadecyl end modified poly(ethylene oxide) chains at low density facilitates hemifusion, generating significant shear stress and leading to stick-slip instabilities. The mixed films regain their lateral cohesion at higher adsorbed copolymer densities, but an extra short-range attraction brings the adsorbed layers into adhesive contact without causing bilayer hemifusion. Here, noticeable frictional forces are also measured.     

pH-sensitive vesicles based on a biocompatible zwitterionic diblock copolymer

Highly biocompatible pH-sensitive diblock copolymer vesicles were prepared from the self-assembly of a biocompatible zwitterionic copolymer, poly[2-(methacryloyloxy)ethyl phosphorylcholine-block-2-(diisopropylamino)ethyl methacrylate], PMPC-b-PDPA. Vesicle formation occurred spontaneously by adjusting the solution pH from pH 2 to above 6, with the hydrophobic PDPA chains forming the vesicle walls. Transmission electron microscopy (TEM), dynamic laser light scattering (DLS), and UV-visible absorption spectrophotometry were used to characterize these vesicles. Gold nanoparticle-decorated vesicles were also obtained by treating the vesicles with HAuCl4, followed by NaBH4.     

Adsorption of water soluble ionic/hydrophobic diblock copolymer on a hydrophobic surface

Summary We consider the adsorption of aA-B diblock copolymer on a planar hydrophobic surface in aqueous solution. The hydrophobic anchor (A) block is envisioned to avoid water and adsorbs on the solid-liquid interface in a collapsed state. The buoy block (B) is a polyelectrolyte which expands in solution and forms a brush whose structure depends strongly on the ionic strength of the solution. The minimization of the grand canonical free energy of the system gives access to the surface density (), the thickness of the collapsed layer (L _A ) and the thickness of the external polyelectrolyte layer (L _B ). These three parametersL _B ,L _A and are functions of the molecular weight of the anchored block (N _A ), the molecular weight of the buoy block (N _B ), the charge of the polymer (Z) and the ionic strength of the aqueous solution ( _s ).     

Anomalous transition in aqueous solutions of a thermoresponsive amphiphilic diblock copolymer

The influence of shear flow on aggregation and disaggregation in aqueous solutions of the thermoresponsive methoxy-poly(ethylene glycol)-block-poly(N-isopropylacrylamide) (MPEG53-b-PNIPAAM113) copolymer that exhibits a lower critical solution temperature was investigated with the aid of turbidity, shear viscosity, and rheo small angle light scattering (rheo-SALS) methods. The turbidity results at quiescent conditions revealed a novel transition peak in the turbidity curve at intermediate temperatures, which reflects the delicate interplay between temperature-induced aggregation and shrinking of the species. A similar anomalous transition peak (located at the same temperature) was observed in the steady shear viscosity measurements at intermediate temperatures, and the amplitude of the peak was reduced with increasing shear rate as a consequence of breakup of interaggregate chains. At low temperatures (low sticking probability), enhanced shear rate generated interpolymer aggregates; whereas in the high-temperature domain (high sticking probability) association structures were broken up as the shear rate was increased. The rheo-SALS experiments disclosed growth of aggregates at low temperatures and destruction of association complexes at high temperatures. An increase of the cloud point temperature with rising shear rate is reported, which is interpreted as being a disruption of clusters under the influence of shear stresses.     

Morphological transformations of nonequilibrium assemblies of amphiphilic diblock copolymer

Amphiphilic diblock copolymer polystyrene-block-poly(ethylene oxide) (PS-PEO) assembled into nonequilibrium bicontinuous structures or mixture of vesicles, bilayers and nanorods upon rapid micellization induced by rapid addition of selective solvent (water) into the PS-PEO solutions in a common solvent (dimethyl formamide) with different concentrations. These kinetically trapped assemblies were unstable and slowly evolved into thermodynamically favorable spheres and vesicles. The addition of non-ionic surfactant Pluronic P123 upon rapid micellization generated novel nanocages and flower-like vesicles. The nanocages spontaneously transformed into tubules capped with vesicles. These novel assemblies are beyond the classic phase diagram of block copolymer self-assemblies, especially for those primarily based on thermodynamics.     

Highly oriented structure formed in a lamella-forming diblock copolymer with high molar mass

Highly oriented films were prepared simply by annealing a lamella-forming block copolymer, poly(ethylene oxide-b-styrene) (PEO-b-PS), with high molar mass under a pressure of 0.2 MPa. The oriented structures were characterized by small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD). The SAXS measurements showed that the lamellar layers of the block copolymer are highly oriented parallel in the film plane. The WAXD images showed that the c-axis of PEO crystals was oriented normal to the film plane. The Hermans-Stein orientation functions for the lamellar layer and the crystal axis are 0.954 and −0.466, respectively, and are close to the values of perfect orientation. It was considered that the highly oriented structure was formed by the combined effects of shear flow and self-organization of the block copolymer during annealing under stress. The high degree of orientation both for the lamellar layer and crystal planes also suggested that the crystallization in the confined domains results in a high degree of orientation of PEO crystals with respect to the lamellar interface of the block copolymer.     

Nickel dithiolene complexes encapsulated in biocompatible amphiphilic diblock copolymer nanoparticles

The goal of this study is to prepare novel hybrid nanoparticles, in the form of micellar nanoparticles in aqueous media, which will combine the properties of the amphiphilic diblock copolymers (such as PEO‐b‐PPhOx and PI‐b‐PEO) with the ones of the nickel 1,2‐dithiolene (1,2‐Ni DT) complexes. The structural and morphological analysis of these nanoparticles have revealed that they can be promising for photodynamic therapy and near‐infrared (NIR) optical imaging due to their size and absorption in NIR. The micellar nanoparticles have been studied not only in aqueous solutions but also under other physiological conditions, that is, PBS and PBS‐FBS buffer solutions. Their solutions are characterized by several methods, including UV–vis spectroscopy, light scattering, and FTIR. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2507–2513     

Synthesis and spectroscopy of CdS nanoparticles in amphiphilic diblock copolymer micelles

Amphiphilic diblock copolymers with the same hydrophilic but different hydrophobic blocks were used as stabilizing agents to prepare cadmium sulfide nanoparticles in aqueous solutions containing 5% of different nonaqueous solvents: methanol, THF, and acetone. Nearly spherical nanoparticles with a fair degree of monodispersity and quantum yields of 1.5%-2% were obtained. Optical absorption band edge of the CdS nanoparticles shows a >0.5 eV blueshift compared to that of bulk CdS, indicating a high degree of quantum confinement. The absorption spectra, while insensitive to the nature of the hydrophobic blocks, exhibited a clear dependence on the nature of the minor, nonaqueous solvents. The photoluminescence in all cases was broad and redshifted, indicating a predominance of surface trap-state emission. Time-resolved photoluminescence demonstrates that the trap states are populated within the first 500 fs, followed by decay with a broad range of time constants from 0.1 to >10 ns, low energy traps decaying at a slower rate than high-energy ones. Time-resolved photoluminescence anisotropy revealed that the nanoparticles experience a local microviscosity very similar to that of bulk water. The experimental observations suggest that nanoparticle formation takes place predominantly in the hydrophilic corona region of the micelles, around specific points with high local concentration of the Cd+2-coordinating basic amine groups of hydrophilic block and/or the minor, nonaqueous solvent component.     

Crowding effect induced phase transition of amphiphilic diblock copolymer in solution

The crowding agent induced phase transition of amphiphilic block copolymers in solution was explicitly considered. The influence of the size and the volume fraction of the crowding agent on the phase separation of amphiphilic diblock copolymers is investigated by using self-consistent field theory (SCFT) method. The concentration of the disorder to order transition of the block copolymer decreases when the size of the crowding agent is larger than that of the solvent. The higher volume fraction of the crowding agent will induce the transition of the block copolymer from disorder to order state at a lower concentration. The relation between the size and the volume fraction of the crowding agent is elucidated. When the size of the crowding agent is larger, its volume fraction of the disorder to order transition of the block copolymer will be lower. The conformation of the crowding agent considered as a polymer chain is also studied and compared.     

Surfactant-free synthesis of amphiphilic diblock copolymer nanoparticles via nitroxide-mediated emulsion polymerization

Amphiphilic hairy nanoparticles are prepared in a one step, batch, heterogeneous polymerization of styrene or n-butyl acrylate, using a water-soluble poly(sodium acrylate) alkoxyamine macroinitiator based on the SG1 nitroxide.     

Sphere-to-rod transition of non-surface-active amphiphilic diblock copolymer micelles: a small-angle neutron scattering study

Micellization behavior of amphiphilic diblock copolymers with strong acid groups, poly(hydrogenated isoprene)-block-poly(styrenesulfonate), was investigated by small-angle neutron scattering (SANS). We have reported previously (Kaewsaiha, P.; Matsumoto, K.; Matsuoka, H. Langmuir 2005, 21, 9938) that this strongly ionic amphiphilic diblock copolymer shows almost no surface activity but forms micelles in water. In this study, the size, shape, and internal structures of the micelles formed by these unique copolymers in aqueous solution were duly investigated. The SANS data were well described by the theoretical form factor of a core-shell model and the Pedersen core-corona model. The micellar shape strongly depends on the hydrophobic chain length of the block copolymer. The polymer with the shortest hydrophobic chain was suggested to form spherical micelles, whereas the scattering curves of the longer hydrophobic chain polymers showed a q-1 dependence, reflecting the formation of rodlike micelles. Furthermore, the addition of salt at high concentration also induced the sphere-to-rod transition in micellar shape as a result of the shielding effect of electrostatic repulsion. The corona thickness was almost constant up to the critical salt concentration (around 0.2 M) and then decreased with further increases in salt concentration, which is in qualitatively agreement with existing theories. The spherical/rodlike micelle ratio was also constant up to the critical salt concentration and then decreased. The micelle size and shape of this unique polymer could be described by the common concept of the packing parameter, but the anomalously stable nature of the micelle (up to 1 M NaCl) is a special characteristic.     

Multiple morphologies of amphiphilic diblock copolymer micelles in two and three dimensions

We show that in aqueous solution, diblock copolymers, where one block is hydrophobic and the other hydrophilic can undergo self-assembly in three dimensions in a manner similar to small molecule amphiphiles. In addition, two dimensional self-assembly has been studied at the air-water interface. We describe the various morphologies which have been observed in these systems and the parameters which we can use to tailor them.     

pH/enzyme/light triple-responsive vesicles from lysine-based amphiphilic diblock copolymers

We report the synthesis of pH- and enzyme-responsive amphiphilic diblock copolymers through reversible addition-fragmentation chain transfer polymerization of a lysine-derived methacrylate monomer comprising p-nitrobenzyl carbamate (pNBC) functionality using a poly(ethylene glycol)-modified macro-chain transfer agent. Depending on the hydrophobic block length, the diblock copolymers self-assemble to form spherical micelles, wormlike micelles, and bilayered vesicles in the aqueous solution. The responsive behaviors of the polymeric vesicles to pH, enzyme, and light are investigated in detail. As the pH lowers to pH 5.0, the polymeric vesicles undergo a morphological transition from vesicles to spherical micelles. In the presence of nitroreductase and a cofactor NADH, the decomposition of pNBC releases the ε-NH₂ of the lysine moiety and hence induces the generation of the vesicles with crosslinked membranes at pH 7.4. Moreover, owing to the degradation of pNBC moiety under UV irradiation, the polymeric vesicles also demonstrate a photo-responsive feature. As the irradiation time prolongs, it is observed a light-triggered morphological transition from vesicles to wormlike micelles with network-like structures.     

Influence of substrate hydrophobicity on the adsorption of an amphiphilic diblock copolymer

The adsorption of poly(tert-butylmethacrylate)-block-poly(2-(dimethylamino-ethyl) methacrylate) (PtBUMA-b-PDMAEMA) was studied by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) analysis performed on dried samples. The copolymer was dissolved in toluene at concentrations below (0.01 wt%) and above (0.05 and 1 wt%) the CMC; silicon (SiOH) and CH(3)-grafted silicon (SiCH(3)) were used as substrates. Whatever the concentration and the substrate, a layer of individual copolymer molecules, 1.5-3 nm thick, formed rapidly. The adsorbed amount was slightly higher and the resistance to AFM tip scraping was stronger on SiOH than on SiCH(3). This is attributed to hydrogen bonding between the PDMAEMA block and the OH groups of the silicon surface, leading to polarization of the adsorbed layer. Above the CMC, on SiOH, randomly scattered dot-like features (about 5 nm high) observed by AFM were attributed to individual micelles, which were not displaced by drying. On SiCH(3), the particles found on the top of the adsorbed layer were micelle aggregates, about 50 nm thick, the lateral size of which was strongly influenced by the rate of drying. This further difference between SiCH(3) and SiOH is tentatively attributed to the exposure of PDMAEMA by the adsorbed layer formed on SiCH(3), while only PtBUMA would be exposed by the layer adsorbed on SiOH. The red blood cell shape and the size of the micelles observed in single layers indicate that the PtBUMA corona was not made compact as a result of drying.     

Plasmid DNA encapsulation within cationic diblock copolymer vesicles for gene delivery

We report the design and structural characterization of cationic diblock copolymer vesicles loaded with plasmid DNA based on a single emulsion technique. For this purpose, a DNA solution was emulsified in an organic solvent and stabilized by an amphiphilic diblock copolymer. The neutral block forms an interfacial brush, whereas the cationic attachment complexes with DNA. A subsequent change of the quality of the organic solvent results in the collapse of the brush and the formation of a capsule. The capsules are subsequently dispersed in aqueous medium to form vesicles and stabilized with an osmotic agent in the external phase. Inside the vesicles, the plasmid is compacted in a liquid-crystalline fashion as shown by the appearance of birefringent textures under crossed polarizers and the increase in fluorescence intensity of labeled DNA. The compaction efficiency and the size distribution of the vesicles were determined by light and electron microscopy, and the integrity of the DNA after encapsulation and subsequent release was confirmed by gel electrophoresis. We demonstrate reverse transfection of in vitro cultured HeLa cancer cells growing on plasmid-copolymer vesicles deposited on a glass substrate.