Determination of the number of ψ' events at BESⅢ

The number of ψ’ events accumulated by the BESⅢ experiment from March 3 through April 14, 2009, is determined by counting inclusive hadronic events. The result is 106.41×(1.00±0.81%)×106 . The error is systematic dominant; the statistical error is negligible.     

Determination of the number of ψ(3686)events at BESⅢ

The numbers of ψ(3686) events accumulated by the BESⅢ detector for the data taken during 2009 and2012 are determined to be(107.0±0.8)×10~6 and(341.1±2.1)×10~6, respectively, by counting inclusive hadronic events,where the uncertainties are systematic and the statistical uncertainties are negligible. The number of events for the sample taken in 2009 is consistent with that of the previous measurement. The total number of ψ(3686) events for the two data taking periods is(448.1±2.9)×10~6.     

Determination of event start time at BESⅢ

The principle of the method for the BESⅢ event start time determination and the code construction are described. The investigation of influence of the noise, the method of rejecting noise and the performance checking by the Monte Carlo physics data sample are also presented. The preliminary results got from the Monte Carlo simulation are presented, the reconstruction efficiency of J/ψ→ anything events at noise level 0~60% can achieve above 99%, and the error rate is below 1%.     

Measurements of the center-of-mass energies at BESⅢ via the di-muon process

From 2011 to 2014,the BESIII experiment collected about 5 fb~(-1) data at center-of-mass energies around 4 GeV for the studies of the charmonium-like and higher excited charmonium states.By analyzing the di-muon process e~+e~- → Yisr/fsr μ~+μ~-,the center-of-mass energies of the data samples are measured with a precision of 0.8 MeV.The center-of-mass energy is found to be stable for most of the time during data taking.     

Study of the efficiency of event start time determination at BESⅢ

A method to estimate the efficiency of event start time determination at BESⅢ is developed. This method estimates the efficiency at the event level by combining the efficiencies of various tracks (e, μ, π, K, p, γ) in a Bayesian way. Efficiencies results and the difference between data and MC at the track level are presented in this paper. For a given physics channel, event start time efficiency and systematic error can be estimated following this method.     

Determination of the number of J/ψ events with inclusive J/ψ decays

A measurement of the number of J/ψ events collected with the BESⅢ detector in 2009 and 2012 is performed using inclusive decays of the J/ψ. The number of J/ψ events taken in 2009 is recalculated to be(223.7±1.4)×10~6, which is in good agreement with the previous measurement, but with significantly improved precision due to improvements in the BESⅢ software. The number of J/ψ events taken in 2012 is determined to be(1086.9±6.0)×10~6. In total, the number of J/ψ events collected with the BESⅢ detector is measured to be(1310.6±7.0)×106, where the uncertainty is dominated by systematic effects and the statistical uncertainty is negligible.     

Study of the efficiency of event start time determination at BESⅢ

A method to estimate the efficiency of event start time determination at BESIII is developed.This method estimates the efficiency at the event level by combining the efficiencies of various tracks(e,μ,π,K,p,γ)in a Bayesian way.Efficiencies results and the difference between data and MC at the track level are presented in this paper.For a given physics channel,event start time efficiency and systematic error can be estimated following this method.     

Event generators for η/η' decays at BESⅢ

The light unflavoured meson η/η' decays are valuable for testing non-perturbative quantum chromodynamics and exploring new physics beyond the Standard Model. This paper describes a series of event generators, including η/η'→γl~+l~-, η/η'→γπ~+π~-, η'→ωe~+e~-, η→π~+π~-π~0, η/η'→π~0π~0π~0, η'→ηππ andη'→π~+π~-π~+π~-/π~+π~-π~0π~0, which have been developed for investigating η/ηdecay dynamics. For most of these generators, their usability has been validated in BESIII analyses for determining the detection efficiency, and background studies. The consistency between data and Monte Carlo shows that these generators work well in the BESⅢ simulation, and will also be useful for ongoing BESⅢ analyses and other experiments for studying η/η' physics.     

Calibration of RPC-based muon detector at BESⅢ

The calibration algorithm for RPC-based muon detector at BESⅢ has been developed. The calibration method, calibration error and algorithm performance are studied. The primary results of efficiency and noise at layer, module and strip levels have been calibrated with cosmic ray data. The calibration constants are available for simulation and reconstruction tuning. The results of Monte Carlo and data are also compared to check the validation and reliability of the algorithm.     

Event generators at BESⅢ

We present a brief remark and introduction to event generators for tau-charm physics currently used at BESⅢ, including KKMC, BesEvtGen, Bhlumi, Bhwide, Babayaga and inclusive Monte-Carlo event generators. This paper provides basic information on event generators for BESⅢ users.     

Trigger efficiencies at BESⅢ

Trigger efficiencies at BESⅢ were determined for both the J/ψ and ψ' data taking of 2009. Both dedicated runs and physics datasets are used; efficiencies are presented for Bhabha-scattering events, generic hadronic decay events involving charged tracks, dimuon events and ψ'→π+π-J/ψ, J/ψ→ 1+1- events.The efficiencies are found to lie well above 99% for all relevant physics cases, thus fulfilling the BESⅢ design specifications.     

Trigger efficiencies at BESⅢ

Trigger efficiencies at BESⅢ were determined for both the J/ψ and ψ＇ data taking of 2009. Both dedicated runs and physics datasets are used; efficiencies are presented for Bhabha-scattering events, generic hadronic decay events involving charged tracks, dimuon events and ψ＇→π＋π-J/ψ, J/ψ→ 1＋1- events.The efficiencies are found to lie well above 99% for all relevant physics cases, thus fulfilling the BESⅢ design specifications.     

Mini-review of rare charmonium decays at BESⅢ

Recently, the LHCb experiment announced 3.5σ evidence for direct CP violation in D⁰ decay by looking at the difference between A_CP(D⁰→K⁺K^-) and A_CP(D⁰→π⁺π^-). This is the rst evidence of CP violation in a charm system, which may indicate new physics beyond the Standard Model. Motivated by this measurement, we review rare processes in charmonium decay, especially, the weak decay, C or P violated decay, and lepton avor violated decays. In case the new physics appears in charm sector, these rare decays of charmonium states will provide an opportunity to search for signi cant contributions from physics beyond the Standard Model. With huge J/ψ and ψ(2S) samples in BES0 experiment, the rare decays may be feasible.     

Calibration of RPC-based muon detector at BESⅢ

The calibration algorithm for RPC-based muon detector at BESIII has been developed. The calibration method, calibration error and algorithm performance are studied. The primary results of efficiency and noise at layer, module and strip levels have been calibrated with cosmic ray data. The calibration constants are available for simulation and reconstruction tuning. The results of Monte Carlo and data are also compared to check the validation and reliability of the algorithm.     

Event generators at BESⅢ

We present a brief remark and introduction to event generators for tau-charm physics currently used at BESⅢ,including KKMC,BesEvtGen,Bhlumi,Bhwide,Babayaga and inclusive Monte-Carlo event generators.This paper provides basic information on event generators for BESⅢ users.     

Determination of the number of J/ψ events with J/ψ → inclusive decays

The number of J/ψ events collected with the BES0 detector at the BEPC/ from June 12 to July 28, 2009 is determined to be (225:3±2:8)×10⁶ using J/ψ → inclusive events, where the uncertainty is the systematic error and the statistical one is negligible.     

Strange quarkonium states at BESⅢ

We present physics opportunities and topics with the s states(strangeonia)that can be studied with the BES detector operating at the BEPC collider.Though the φ and η/ states have long been established experimentally,only a handful of strangeonia are well known,in contrast to the rich ccharmoium system.An overview of the s states and their experimental status is presented in this paper.The BES experiment has collected the world’s largest samples of J/ψ,ψ(2S),ψ(3770),and direct e+e-annihilations at energies below the J/ψand above 3.8 Ge V,and will continue to accumulate high quality,large integrated luminosity in theτ-charm energy region.These data,combined with the excellent performance of the BESⅢ detector,will offer unprecedented opportunities to explore the s system.In this paper we describe the experimental techniques to explore strangeonia with the BESⅢ detector.     

Significance of absolute energy scale for physics at BESⅢ

The effects of absolute energy calibration on BESⅢ physics are discussed in detail, which mainly involve the effects on τ mass measurement, cross section scan measurement, and generic error determination in other measurements.     

A photon conversion finder at BESⅢ

A photon conversion finder (PCF) based on track information from the main drift chamber (MDC) of the Beijing Spectrometer (BES0) at the Beijing Electron Positron Collider (BEPC/) is developed. The validation of the PCF is done by reconstructing π⁰ and measuring the branching fraction of J/ψ →γη'. Using the developed PCF tool, we mapped the materials from the interaction point through the BEPCII beam pipe up to the inner wall of the MDC.     

A photon conversion finder at BESⅢ

A photon conversion finder (PCF) based on track information from the main drift chamber (MDC) of the Beijing Spectrometer (BES0) at the Beijing Electron Positron Collider (BEPC/) is developed. The validation of the PCF is done by reconstructing π⁰ and measuring the branching fraction of J/ψ →γη'. Using the developed PCF tool, we mapped the materials from the interaction point through the BEPCII beam pipe up to the inner wall of the MDC.