以枝形大分子聚酰胺-胺(PAMAM)为键合固定相的开管毛细管电色谱柱的制备及评价

用3-氨丙基三乙氧基硅烷(KH550)作偶联剂, 在毛细管内壁上逐步合成树枝形大分子聚酰胺-胺(PAMAM), 制得了1, 2和3代PAMAM键合的开管毛细管电色谱柱, 并对其性能进行了研究. 结果表明, 随着大分子代数的增加, 毛细管电渗流(EOF)逐步下降. 利用制得的1, 2和3代PAMAM修饰的开管毛细管电色谱柱对丙氨酸和脯氨酸的分离进行对比, 结果显示, 随着大分子PAMAM代数的增加, 分离度逐步增大, 丙氨酸和脯氨酸可在3代树枝状大分子PAMAM修饰的开管毛细管电色谱柱上达到基线分离. 采用非衍生化法和3代PAMAM修饰的开管毛细管电色谱柱成功地分析了精氨酸、 丙氨酸、 脯氨酸、 甲硫氨酸和组氨酸. 结果表明, 键合毛细管柱具有良好的重现性和稳定性.     

Dendrimer-Like Chiral Stationary Phases Derived from (1R, 2R)-(+)-1,2-Diphenylethylenediamine and 1,3,5-Benzenetricarbonyl Trichloride

Three dendrimers were synthesized directly on aminated silica gel using (1R, 2R)-(+)-1,2-diphenylethylenediamine and 1,3,5-benzenetricarbonyl trichloride as building blocks. The chiral stationary phases were obtained by modification of these dendrimers with phenyl isocyanate. All derivatives prepared on silica gel were characterized by FTIR spectrum, solid-state ¹H NMR and elemental analysis. The enantioseparation ability of the chiral stationary phases was preliminarily evaluated by high-performance liquid chromatography. The chiral stationary phase of one-generation dendrimer exhibited best enantioseparation ability.     

Triazine dendrimers by divergent and convergent methods

Two types of dendrimers with a 1,3,5‐triazine ring at the branch point were synthesized by divergent and convergent methods. The divergent method began with 2,4,6‐tris(p‐nitroanilino)‐1,3,5‐triazine as a trifunctional core. Each cycle involved the reduction of the peripheral NO₂ group followed by a reaction with 2‐chloro‐4,6‐bis(p‐nitroanilino)‐1,3,5‐triazine. The synthetic cycle was completed by the coupling with 2,4‐dianilino‐6‐chloro‐1,3,5‐triazine (DACT) to eventually accomplish second‐generation dendrimers ([G2]₃‐C) bearing 12 benzene rings at their edge. The convergent approach started with the reaction of DACT with p‐nitrophenol to give rise to 2,4‐dianilino‐6‐(p‐nitrophenoxy)‐1,3,5‐triazine. The synthetic cycle consisted of reduction of the NO₂ group and coupling with 2,4‐dichloro‐6‐(p‐nitrophenoxy)‐1,3,5‐triazine. The final step was the connection of each monodendron with cyanuric chloride to produce tridendron; in this way, the second‐generation dendrimer ([EG2]₃‐C) was obtained. Gel permeation chromatography analyses indicated the aggregation of dendrimers in solution. Ultraviolet spectroscopic analyses revealed that the larger dendrimer had a more conjugated electron system from the core to the periphery. The thermal properties were evaluated by thermogravimetric analysis (TGA); excellent heat resistance was indicated, especially in [G1]₃‐C, which included alternately imine‐like nitrogen‐linked 1,3,5‐triazine and benzene rings. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4385–4395, 2000     

纳米二氧化硅为核的树枝状分子中荧光素激基缔合物和基态复合物的形成

在以二氧化硅为核的聚酰胺(PAMAM)树枝状聚合物的外端, 通过表面化学修饰引入了具有发射荧光能力的荧光素分子. 通过稳态荧光方法研究其固体和在水和丙酮的悬浮液中的光物理行为. 试验结果表明, 固体样品中, 在零代树枝状分子(G0F)中, 荧光发射主要是激基缔合物的发射, 在第一(G1F)和第二代(G2F)中只有基态复合物的发射. 在不同的悬浮液中不同的光物理行为表明, 树枝状分子中树枝链间的氢键作用的大小决定荧光素基团间是形成激基缔合物还是形成基态复合物. 这为设计和开发新型“壳-核”型纳米二氧化硅荧光传感器提供了有用的实验依据.     

Column packings for high-performance liquid chromatography and positron annihilation lifetime spectroscopy

Positron annihilation measurements as a function of temperature and the length of bonded alkyl groups have been carried out on silica gel samples. Silica gel samples were bare and bonded with alkyl group from C1 up to C18. The diameters of pores were deduced from the lifetime of trapped ortho-positronium (o-Ps), and it was found that o-Ps lifetime provides reasonable information on the pore sizes for both bare and alkyl bonded silica gels.     

Liquid chromatographic behavior of two alanine‐substituted calix[4]arene‐bonded silica gel stationary phases

Two new kinds of alanine‐substituted calix[4]arene stationary phases of 5,11,17,23‐p‐tert‐butyl‐25,27‐bis(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐26,28‐dihyroxycalix[4]arene‐bonded silica gel stationary phase (BABS4) and 5, 11, 17, 23‐p‐tert‐butyl‐25,26,27,28‐tetra(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐calix[4]arene‐bonded silica gel stationary phase (TABS4) were prepared and characterized in the present study. They were compared with each other and investigated in terms of their chromatographic performance by using polycyclic aromatic hydrocarbons, disubstituted benzene isomers, and mono‐substituted benzenes as solute probes. The results indicated that both BABS4 and TABS4 exhibited multiple interactions with analytes. In addition, the commonly used Tanaka characterization protocol for the evaluation of commercially available stationary phases was applied to evaluate the properties of these two new functionalized calixarene stationary phases. The Tanaka test results were compared with Zorbax Eclipse XDB C₁₈ and Kromasil phenyl columns, respectively. BABS4 has stronger hydrogen‐bonding capacity and ion‐exchange capacity than TABS4, and features weaker hydrophobicity and hydrophobic selectivity. Both of them behave similarly in stereoselectivity. Both BABS4 and TABS4 are weaker than C₁₈ and phenyl stationary phases in hydrophobicity and hydrophobic selectivity.     

Purification of enzymes by high-speed gel filtration on TSK-GEL SW columns

The purification of enzymes was investigated by high-speed gel filtration on TSK-GEL G3000SWG columns packed with porous silica gel deactivated by chemically bonded hydrophilic compounds. Crude β-galactosidase from bacterial cells and commercial urease were purified ca. 15-fold in a single gel filtration. These enzymes were eluted within an hour from the column and the recoveries of enzymatic activity were almost 100% although the operation was carried out at room temperature (22°). Samples up to 100 mg could be applied to the column without loss of separation efficiency.     

Blends of fatty‐acid‐modified dendrimers with polyolefins

Blends were made by solution and melt‐mixing fatty‐acid‐modified dendrimers with various polyolefins. Small‐angle neutron scattering (SANS) was used to determine the miscibility of the blends. Poly(propylene imine) (PPI) dendrimers G1, G3, and G5 [DAB‐dendr‐(NH₂)_y] with y = 4, 16, and 64, were reacted with stearic acid or stearic acid‐d₃₅ forming amide bonds. The modified dendrimers were then blended with high‐density polyethylene (HDPE), high‐density polyethylene‐d₄ (HDPE‐d₄), low‐density polyethylene (LDPE), amorphous polypropylene (PP), or an ethylene–butylene copolymer (E‐co‐B). Limiting power law behavior shows that all of the blends are immiscible. It is likely that the dendrimers form a second phase, being finely dispersed, but thermodynamically immiscible. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 95–100, 2000     

Dendrimers and Hyperbranched Polyesters as Structure‐Directing Agents in the Formation of Nanoporous Silica

Anionic dendritic macromolecules (hyperbranched polyesters and polyamidoamine (PAMAM) dendrimers) and amine‐functionalized PAMAM dendrimers have been used as structure‐directing agents in the synthesis of nanoporous silica structures. When utilizing carboxylates as structure‐directing agents the incorporation of the negatively charged species into a SiO₂ framework was achieved via a sol‐gel synthesis route using a quaternized aminosilane as co‐structure‐directing agent to yield silica materials of various morphologies and high surface areas. Amine dendrimers as porogens gave materials with high surface areas, revealing increasing pore sizes corresponding to the increasing size of the porogen. The resulting materials have been characterized by X‐ray diffraction (XRD), N₂ adsorption/desorption (BET), scanning electron microscopy (SEM), infrared spectroscopy (IR), and thermogravimetric analysis (TGA).     

A Dendrimer Chiroptical Switch Based on the Reversible Intramolecular Photoreaction of Anthracene and Benzene Rings

A series of Fréchet‐type dendrimers with 9‐benzyloxymethylanthracene cores were synthesized and characterized. The chiral source for the dendrimers was an (S)‐2‐methyl‐1‐butoxy group in the 3‐position of the benzene ring. Irradiation at 366 nm of a dilute benzene solution led to the formation of two diastereomers (1:1) through a quantitative intramolecular [4π+4π] cycloaddition between the central anthracene ring and the neighboring benzene ring. The process can be reversed with 254 nm UV light or heat. The benzene rings in the dendrons work as a light‐harvesting system. The optical rotation values measured for the reversible process showed fatigue resistance. Thus, a promising new type of chiroptical switch has been created that has optical rotation values as output signals.     

Benzoxazine/Triphenylamine‐Based Dendrimers Prepared through Facile One‐Pot Mannich Condensations

A series of thermally polymerizable dendrimers of various generations, equipped with triphenylamine (TPA) and benzoxazine (BZ) groups, is synthesized through facile one‐pot Mannich condensations of N ¹,N¹‐bis(4‐aminophenyl)benzene‐1,4‐diamine (TPA–3NH₂, as the core group), 4‐(bis(4‐aminophenyl)amino)phenol (TPA–2NH₂–OH, as the AB₂ branching group), and CH₂O in 1,4‐dioxane. The ratios of the integrated areas in the ¹H nuclear magnetic resonance spectra of these dendrimers are consistent with the theoretical numbers of protons, suggesting their successful syntheses. Bathochromic shifts of signals are evident in the UV–vis and photoluminescence spectra upon increasing the generation of the TPA–BZ dendrimers, consistent with an increase in the effective conjugation length. The TPA–BZ dendrimers are able to undergo thermal polymerization and display unique optical physical properties, resulting in thermoset TPA networks after thermal ring‐opening polymerization.     

7种胺基键合硅胶的制备及其对重金属Pb2+的吸附

制备了氨丙基键合硅胶（SiO₂-N）、乙二胺-N-丙基键合硅胶（SiO₂-2N）、二乙烯三胺基键合硅胶（SiO₂-3N）、三乙烯四胺基键合硅胶（SiO₂-4N）、四乙烯五胺基键合硅胶（SiO₂-5N）、五乙烯六胺基键合硅胶（SiO₂-6N）和聚乙烯亚胺基键合硅胶（SiO₂-nN）,一步法制备的SiO₂-N和SiO₂-2N的胺基键合密度高达2.07 mmol/g和1.71mmol/g,两步法制备的SiO₂-nN的胺基键合密度为0.02mmol/g,其余胺基键合硅胶中胺基密度约为0.50mmol/g。这7种胺基键合硅胶被用于水溶液中常见重金属离子Pb²⁺的吸附研究。结果表明,在30℃条件下,分别加入10 mL 400 mg/L的Pb²⁺溶液（pH 5）和20 mg胺基键合硅胶进行吸附,10 h后,Pb²⁺吸附量达到最大,吸附过程符合Freundlich等温方程。SiO₂-N、SiO₂-2N、SiO₂-3N、SiO₂-4N、SiO₂-5N、SiO₂-6N和SiO₂-nN对Pb²⁺的吸附量依次为131.28、138.98、85.37、75.22、61.87、79.12和114.06 mg/g,这些胺基键合硅胶在吸附Pb²⁺方面均非常具有潜力。     

Reaction of Amino-Terminated PAMAM Dendrimers with Carbon Dioxide in Aqueous and Methanol Solutions

Polyamines have been used as active materials to capture carbon dioxide gas based on its well-known reaction with amines to form carbamates. This work investigates the reactions between three amino-terminated poly(amidoamine) (PAMAM) dendrimers (G1, G3 and G5) and CO₂(g) in aqueous (D₂O) and methanolic (CD₃OD) solutions. The reactions were monitored using ¹H NMR spectroscopy, and yielded dendrimers with a combination of terminal carbamate and terminal ammonium groups. In aqueous media the reaction was complicated by the generation of soluble carbonate and bicarbonate ions. The reaction was cleaner in CD₃OD, where the larger G5 dendrimer solution formed a gel upon exposure to CO₂(g). All reactions were reversible, and the trapped CO₂ could be released by treatment with N₂(g) and mild heating. These results highlight the importance of the polyamine dendrimer size in terms of driving changes to the solution’s physical properties (viscosity, gel formation) generated by exposure to CO₂(g).     

Synthesis and characterization of poly(ethyleneimine) dendrimers

Poly(ethyleneimine) (PEI) dendrimers up to the third generation (G3) were prepared by a divergent synthesis method from an ethylenediamine (EDA) core. The amine terminals were bonded with vinylbromide by a Michael addition reaction. Then, the bromide terminals were converted to amine groups using a Gabriel amine synthesis method. PEI dendrimers displayed pH-dependent luminescence, and their emission intensities at pH 6 increased over time. Fluorescence intensities also increased with increasing dendrimer generation from G1 to G3. Air-bubbling in aqueous solutions of dendrimers made to incorporate detectable amount of oxygen in dendrimers. EDA also behaved similarly in luminescence and oxygen incorporation.

The Adsorption of Methanol Vapors on Silica Gel Si-100 and Its Surface Containing Different Concentrations of Chemically Bonded Fluoride Ions

Synthesis of two types Si-100 silica gel with different concentrations of chemically bonded surface fluoride ions (2 and 4 μmol m⁻² ) was performed. Using gravimetric methods, adsorption isotherms of methanol as a function of its pressure in gas phase were measured for these adsorbents. It was found the strong surface deactivation of silica gel in relation to methanol with the increase of bonded fluoride ions concentration. This revised version was published online in August 2006 with corrections to the Cover Date.     

Radiation effect on polystyrene deposited and grafted on silica gel

The effect of radiation on polystyrene was studied in the presence and absence of silica gel by molecular weight measurement with GPC. Polystyrene crosslinked under vacuum in the absence of silica gel, but it either crosslinked or degraded by radiation, depending on the molecular weight of the polymer in the presence of silica gel. Part of the deposited polymer bonded to silica gel by radiation; the G value for graft-chain formation is in the range of 0.01–0.1. Irradiation of polystyrene grafted on silica gel resulted in degradation of the graft chain because of the transfer of energy from silica gel. The G value for main chain scission was about 2 when graft polymer was irradiated in the absence of homopolymer. The degradation of graft polymer was suppressed when the polymer was irradiated in the presence of homopolymer, and the amount of unextractable polymer from silica gel increased with increasing irradiation. This adds evidence to the estimation that an increase in grafting percent coupled with a slight decrease in molecular weight at a later stage of radiation-induced polymerization of styrene adsorbed on silica gel is due to a secondary effect of radiation on the polymer.     

Use of Chemically Bonded β‐Cyclodextrin Silica Stationary Phase for Liquid Chromatographic Separation of Structural Isomers

The retention behavior of five disubstituted benzene derivatives and two naphthalene derivatives is examined by using a chemically bonded β‐cyclodextrin silica stationary phase with the moiety containing the s‐triazine. The chromatographic results of five disubstituted benzene derivatives and two naphthalene derivatives show that effective separation is achieved on this stationary phase by high‐performance liquid chromatography. The results of the present investigation indicate that the formation of inclusion complexes plays a dominant role in the separation mechanism. However, the selectivity can be significantly enhanced by the n‐n interactions between the s‐triazine ring of the chemically bonded β‐cyclodextrin silica stationary phase and the aromatic ring of solutes. For example, the effective separation of the o‐, m‐, and p‐toluidine isomers on this stationary phase with the moiety containing the s‐triazine ring was better than on that of some β‐cyclodextrin bonded stationary phases without the moiety containing s‐triazine ring.     

Hetero type III-B rotaxane dendrimers

Type III-B rotaxane dendrimer is a member of the rotaxane dendrimer family, but it is defined as dendritic polyrotaxane, branched through rings. Such rotaxane dendrimers have been synthesized through versatile copper-catalyzed azide-alkyne cycloaddition reactions. In order to incorporate more functionalities into type III-B rotaxane dendrimers, three different potential functionalities—azobenzene toward light switch, daisy chain toward higher degree of contraction, and extension and cyclobis (paraquat-p-phenylene) (CBPQT) toward redox chemistry—were combined into the original design of type III-B rotaxane dendrimers. Two azo-based G1/G2 and four new G1 and G2 hetero type III-B rotaxane dendrimers were synthesized and characterized by ¹H NMR spectroscopy and electrospray ionization mass spectrometry.     

Preparation of Unconventional Dendrimers that Contain Rigid NH?Triazine Linkages and Peripheral tert‐Butyl Moieties for CO2‐Selective Adsorption

Three unconventional dendrimers that contained rigid NH? triazine linkages and peripheral tert‐butyl moieties were prepared by using a convergent approach and characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry, and elemental analysis. Based on a thermogravimetric analysis study, these dendrimers were observed to display thermal stability at about 300 °C. The NH? triazine moiety, which possessed protonated and proton‐free nitrogen sites (like the imidazole unit), displayed the capture of polarizable CO₂ molecules through hydrogen‐bond and/or dipole–quadrupole interactions. In addition, the adsorption of various amounts of CO₂ and N₂ at different pressures suggests that the dendritic pores, which arise from the stacking of the middle co‐planar and rim protuberant dendrimers, G _n ‐N～N‐G _n (n=1–3), either swell or shrink at high pressure, thus indicating that these dendrimers may have a breathing ability.     

Quartz Rod Coated with Modified Silica Gel as a Source of CO and CO2 for Standard Gaseous Mixtures

Quartz rods coated with a thin layer of chemically modified silica gel have been used for the generation of a two-component gaseous standard mixture containing carbon monoxide and carbon dioxide. A new method based on thermal decomposition of immobilized compounds chemically bonded to the surface of silica gel has been used in the generation process. The oxalic acid moiety bonded to the glycydoxypropylsilylated surface of silica gel underwent decarbonylation and decarboxylation at 300°C, yielding carbon monoxide and carbon dioxide. On-line connection of a thermal desorber with the GC/FID enabled calibration of the detector following the process of methanization of CO and CO₂. The following amounts of CO and CO₂ were generated per unit length of the rod: 15.1 × 10⁻⁸ Mol cm⁻¹ (RSD = 5.71%) for CO and 34.2 × 10⁻⁸ Mol cm⁻¹(RSD = 5.16%) for CO₂.