Time‐of‐flight secondary ion mass spectrometry and gas chromatography–mass spectrometry studies of alkanethiol self‐assembled monolayers on nanoporous gold surfaces

The dimerization of alkanethiol mixtures (hexanethiol, octanethiol, and dodecanethiol) to form self‐assembled monolayers (SAMs) from headspace on nanoporous gold surfaces was studied for the first time using gas chromatography (GC/MS) and time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS). The nanoporous gold surfaces were obtained by an acidic etching of a 585‐gold alloy. Field emission scanning electron microscopy (FE‐SEM) was utilized to study the change of the surface geometry and porosity of the gold surfaces before and after etching. Alkanethiols were deposited from the vapor phase above the thiol solutions (headspace) on nanoporous gold plates and nanoporous gold solid‐phase vmicroextraction (SPME) fibers. The nanoporous gold substrates were analyzed by TOF‐SIMS and GC/MS, respectively. The TOF‐SIMS spectra exhibited various gold–sulfur ion clusters and specific peaks related to the adsorption of thiols such as deprotonated monomers, thiolate–Au, dimers (e.g., dialkyl sulfides–Au and dialkyl disulfides–Au). The GC/MS analysis of headspace extractions of alkanethiol mixtures by nanoporous gold SPME fibers showed a high extraction efficiency of alkanethiol, dialkyl sulfide, and dialkyl disulfide when compared with the commercial SPME fibers (DVB‐CAR‐PDMS and CAR‐PDMS). Different GC/MS optimization factors were studied including the extraction time and desorption temperature.     

Electrocrystallization of rhodium clusters on thiolate-covered polycrystalline gold

This study reports on the electrochemical deposition of rhodium metal clusters on a polycrystalline gold electrode, modified with a monolayer of dodecanethiol through self-assembly from solution. The deposition process was investigated using cyclic voltammetry, chronoamperometry, and electrochemical quartz crystal microbalance. It is shown that the presence of the thiol monolayer drastically alters the nucleation and growth mechanism compared with the mechanism on the bare gold electrode. The small uncovered gold domains, located at the imperfections in the thiolate monolayer which are induced by the gold nanoroughness, act as nucleation sites for small rhodium clusters. At longer times, these clusters can outgrow the organic monolayer. The resulting surface morphology was characterized by scanning electron microscopy. Rhodium electrocrystallization on the bare gold substrate resulted in an ensemble of a very large amount of very small clusters that are difficult to distinguish from the gold roughness. In contrast, in the presence of a self-assembled monolayer (SAM) of dodecanethiol covalently attached to the gold electrode, the resulting deposit consisted of an ensemble of hemispherical particles. The size distribution of the rhodium particles obtained by using double step chronoamperometry was compared to the ones obtained with cyclic voltammetry and "classical" chronoamperometry. It is shown by X-ray photoelectron spectroscopy that the SAM is still present after rhodium deposition on the thiolate-covered gold substrate. Because the rhodium clusters are directly attached to the gold substrate and can thus easily be electrified, the resulting interface could be used as a composite electrode consisting of a random array of gold supported rhodium nano/microparticles separated from each other by an organic phase. On the other hand, it is shown that the SAM is easily removed by electrochemical oxidation without dissolving the rhodium clusters and, thus, leaving a different array of rhodium clusters on the gold surface compared with the topography obtained in the absence of the SAM. From this point of view, substrate modification with such "removable" organic monolayers was found to be an interesting tool to tune the nano- or microtopography of electrochemically deposited rhodium.     

Chiral inversion of gold nanoparticles

The thiolate-for-thiolate ligand exchange was performed on well-defined gold nanoparticles under an inert atmosphere without any modification of the core size. This reaction is faster than the well-known core etching. Surprisingly, if a chiral thiol is exchanged for its opposite enantiomer, the optical activity in the metal-based electronic transitions is reversed although the form of the CD spectra remains largely unchanged. The extent of inversion corresponds to the overall ee of the chiral ligand in the system. This shows that the chiral arrangement of metal atoms in the metal particle (surface) can not withstand the driving force imposed by the ligand of opposite absolute configuration. If the incoming thiol has a different structure, the electronic transitions in the metal core are slightly modified whereas the absorption onset remains unchanged. These results emphasize the influence of the thiols on the structure of the gold nanoparticles and give insight on the ligand exchange pathways.     

Aerobic oxygenation of phenylboronic acid promoted by thiol derivatives under gold-free conditions: a warning against gold nanoparticle catalysis

Oxygenation of phenylboronic acid to phenol is promoted by thiol derivatives such as 2-aminothiophenol under aerobic conditions in water without metal catalyst. A plausible mechanism involves autoxidation of thiol to generate hydrogen peroxide in situ, which converts phenylboronic acid into phenol under basic conditions. Since thiols are often utilized as protective ligands for gold nanoparticles (AuNPs), this result is a warning that excess thiols and free thiols liberated from the Au surface could participate in aerobic oxidations catalyzed by thiol-protected AuNPs.     

Kinetics of exchange of alkanethiol monolayers self-assembled on polycrystalline gold

We report on the exchange between a hydrophilic thiol (11-mercapto-1-undecanol) in a liquid or gas phase and a hydrophobic thiol (dodecanethiol) of similar length self-assembled on a polycrystalline gold surface for a wide range of temperatures and times. The molecular composition of the mixed monolayers is determined by the static water contact angle and X-ray photoelectron spectroscopy measurements. Atomic force microscopy in lateral force mode is used to characterize the molecular domains at the nanometer level. The exchange first occurs rapidly at the gold grain boundaries, with an activation energy of about 66 +/- 4 kJ/mol. Then, boundaries of ordered thiol domains are progressively replaced, and the exchange is slowed because only regions of increasing perfection are left untouched. Higher temperatures lead to faster kinetics of replacement and the removal of larger amounts of the original thiol. No significant difference could be detected between exchange occurring in an ethanol solution or in the gas phase, and the initial rate of exchange was found to be similar for the displacement of dodecanethiol by 11-mercapto-1-undecanol molecules and for the converse displacement.     

Expeditious synthesis of water-soluble, monolayer-protected gold nanoparticles of controlled size and monolayer composition

A protocol is reported for the preparation of water-soluble, thiol-protected Au nanoparticles (Au-MPC) where dioctylamine is used as a stabilizing agent when the gold cluster is formed using the two-phase Brust and Schiffrin procedure. The amount of amine controls the size of the nanoparticles in the 1.9-8.9 nm diameter range. The final stabilization of the gold clusters by addition of functionalized thiols is performed under very mild conditions compatible with most biomolecules. The procedure is suitable for a wide variety of functional groups present in the thiol and allows one to use thiol mixtures with a precise control of their composition in the monolayer. As a proof of principle, examples of nanoparticles protected with thiols comprising functional groups ranging from polyethers, saccharides, polyamines and ammonium ions are reported.     

Spontaneous assembly of organic thiocyanates on gold sufaces. Alternative precursors for gold thiolate assemblies

Thiolate self-assembly on gold has proven to be a valuable technique for assembling monolayers on a wide variety of substrates. However, the oxidative instability of the thiols, especially aromatic thiols and alpha,omega-dithiols, presents several difficulties. Shown here is that thiocyanates, easily synthesized stable thiol derivatives, can be directly assembled on gold surfaces with no auxiliary reagents required. Assembly is complete in 24 h and leaves a similar gold thiolate structure as seen in typical thiol self-assembled monolayers.     

Scanning tunneling microscopy-based replacement lithography on self-assembled monolayers: comparison of gold, palladium, and platinum substrates

Self-assembled monolayers of dodecanethiol on gold, palladium, and platinum can be locally replaced with a different thiol under the action of a scanning tunneling microscopy tip at elevated bias. This process is characterized and the bias dependence of the degree of replacement for each metal substrate is illustrated. Replacement on gold substrates occurs at lower applied potentials than on platinum substrates, provided care has been taken to remove surface oxides.     

Recognition of the dihydrogenophosphate anion on a gold electrode derivatized with an amidoferrocenylalkylthiolate ligand

A dialkyl disulfide derivative with an amidoferrocenyl termini was synthesized and coordinated as an alkylthiolate ligand to the surface of a gold electrode which was shown by cyclic voltammetry. This derivatized electrode behaved as an electrochemical redox sensor allowing the recognition of the dihydrogenophosphate anion.     

金纳米团簇功能化及其在生物医学中的应用

对单分子层保护的金纳米团簇(Au-MPCs)进行化学修饰,可制成多元单层修饰的金纳米团簇（Au-MMPCs）。常用的修饰方法为配体交换法,这种方法用带有生物活性基团的巯基化合物或二硫化合物取代Au-MPCs表面的配体分子,形成多元单层修饰的金纳米团簇。巯基化合物或二硫化合物中的生物活性基团可使所制备Au-MMPCs与蛋白质、核酸或细胞膜等作用,使Au-MMPCs具有相应的生物活性,从而能广泛应用于细胞转染、药物传输、酶活性调控等生物医学领域。本文介绍了用Brust-Schiffrin法制备Au-MMPCs的机理及影响因素,基于Au-MMPCs的方法及相关机理,综述了Au-MMPCs在生物医学中的应用。     

Self-assembled monothiol-terminated hyperbranched polyglycerols on a gold surface: a comparative study on the structure, morphology, and protein adsorption characteristics with linear poly(ethylene glycol)s

Monothiol-terminated hyperbranched polyglycerols (HPGs) were synthesized by ring-opening polymerization of glycidol from partially deprotonated 2,2'-dihydroxyethane disulfide as the initiator and subsequent reduction of the disulfide group. Two molecular weights of HPG thiols were synthesized. The molecular weights of the polymers were determined by MALDI-TOF analysis, and the presence of thiol was verified by Ellman's assay. The self-assembly of HPG thiols on gold was studied and compared with that of linear poly(ethylene glycol) (PEG) thiols utilizing various surface analysis techniques. Monothiol-functionalized HPGs readily adsorbed to a gold surface and formed highly uniform thin films on the surface. The graft density of the HPG layer decreased with an increase in the molecular weight of the polymer. The amount of polymer on the surface increased with increasing incubation concentration and saturated above 6 g/L polymer concentration. Generally, HPG thiols gave lower graft density compared to linear PEG thiols of similar molecular weight. AFM morphological studies showed that HPG thiols form more uniform and smooth surface films compared to PEG thiols. Incubation of a polymer-coated surface (HPG thiols and PEG thiols) with bovine serum albumin and immunoglobulin showed that the high molecular weight hyperbranched polyglycerol was more resistant to protein adsorption than linear PEG of similar molecular weight or lower molecular weight HPG. The protein adsorption decreased with increasing graft density of the HPG chains on the surface. Our results show that HPG could be a good alternative to PEG in the development of nonfouling functional surfaces.     

Determination of penicillamine, penicillamine disulfide and penicillamine-glutathione mixed disulfide by high-performance liquid chromatography with electrochemical detection

Methodology is described for the simultaneous determination of D-penicillamine, penicillamine disulfide and the penicillamine-glutathione mixed disulfide, as well as glutathione and glutathione disulfide, in human plasma, erythrocytes and urine. The various thiols and disulfides are separated by reversed-phase ion-pairing liquid chromatography with detection by an electrochemical detector with dual gold/mercury amalgam electrodes in series. The thiols are detected at the downstream electrode; the disulfides are reduced at the upstream electrode and then detected as the thiols at the downstream electrode. Detection limits (at a signal-to-noise ratio of 2.0) are in the picomole range for 20 microliters of injected solution for all compounds except penicillamine disulfide, which has a detection limit of 600 pmol in 20 microliters. A convenient method is described for preparation of the penicillamine-glutathione mixed disulfide by thiol/disulfide exchange with standardization of the solution by 1H NMR spectroscopy.     

Alkylthiol gold nanoparticles in sol-gel-based open tubular capillary electrochromatography

A novel open-tubular capillary electrochromatography (OTCEC) column was prepared by immobilizing dodecanethiol gold nanoparticles on prederivatised fused-silica capillary columns with sol-gel technology. 3-Mercaptopropyl-trimethoxysilane (MPTMS) was selected as sol-gel precursor to develop a sol-gel layer on the inner wall of the capillary, prior to assembly of dodecanethiol gold nanoparticles onto the generated sol-gel layer through specific interaction between the gold nanoparticles and surface terminating thiol groups. The electrochromatographic behaviour of the sol-gel gold nanoparticle capillary was compared with a gold nanoparticle capillary prepared via MPTMS surface functionalisation, through variation of the percentage of the organic modifier, pH, and separation voltage. Efficient separation for a "reversed-phase" test mixture of thiourea, naphthalene, and biphenyl and for selected polycyclic aromatic hydrocarbons (PAHs) was obtained on the sol-gel based gold nanoparticle capillaries. OTCEC separations of three selected drug substances (propiophenone, benzoin, and warfarin) were also demonstrated. Scanning electron microscopy was used for the characterization of the sol-gel gold nanoparticle capillary surface. The results confirm that dodecanethiol gold nanoparticles, bound on the sol-gel-based inner layer of fused-silica capillary, can provide sufficient solute-bonded phase interactions for OTCEC with reproducible retention as well as characteristic reversed-phase behaviour.     

A general thiol assay based on the suppression of fluorescence resonance energy transfer in magnetic-resin core-shell nanospheres coated with gold nanoparticles

A simple, rapid and sensitive fluorescence resonance energy transfer (FRET) method is presented for the determination of thiols. It is based on the thiol-induced enhancement effect of the surfactant sodium dodecyl sulfate (SDS) on the efficiency of fluorescence resonance energy transfer (FRET) in nanospheres consisting of a magnetic (Fe₃O₄) core and a phenol-formaldehyde resin (PFR) shell containing gold nanoparticles (AuNPs). The luminescence of the core-shell nanospheres at excitation/emission wavelengths of 390/445 nm, respectively, is quenched by the AuNPs which act as energy acceptors. The interaction of AuNPs with thiol compounds in the presence of SDS suppresses FRET and gives rise to a fluorescent signal whose intensity is proportional to the thiol concentration. The analytical features of seven thiols (homocysteine, thioglycolic acid, glutathione, dodecanethiol, cysteamine, cysteine and N-acetylcysteine) were studied. Detection limits are in the range from 0.14 to 0.49 μmol L⁻¹. The precision of the method, expressed as the relative standard deviation, ranges from 0.4 to 4.9 %. The method was applied to the determination of total thiols in water samples with recovery values between 88.7 and 104.6 %.

The fluorescence resonance energy transfer in magnetic-resin core-shell nanospheres coated with gold nanoparticles is inhibited by thiol compounds in the presence of sodium dodecyl sulfate. This gives rise to a fluorescent signal whose intensity is proportional to the thiol concentration.

     

Influence of Capping Ligands on the Self—organization of Gold Nanoparticles into Superlattices from CTAB Reverse Micelles

Gold nanoparticles with size 3-10nm (diameter) were prepared by the reduction of HAuCl4 in a CTAB/octane 1-butanol/H2O reverse micelle system using NaBH4 as the reducing agent.The as-formed gold nanoparticle colloid was characterized by UV/vis absorption spectrum and transmission electron microscopy(TEM).Various capping ligands,such as alkylthiols with different chain length and shape,trioctylphosphine(TOP),and pyridine are used to passivate the gold nanoparticles for the purpose of self-organization into superstructures.It is shown that the ligands have a great influence on the selforganization of gold nanoparticles into superlattices,and dodecanethiol C12H25SH is confirmed to be the best ligand for the self-organization.Self-organization of C12H25SH-capped gold nanoparticles into 1D,2D and 3D supperlattices has been observed on the carbon-coated copper grid by TEM without using any selective precipitation process.     

Water-soluble gold nanoparticles protected by fluorinated amphiphilic thiolates

The preparation and the properties of gold nanoparticles (Au NPs) protected by perfluorinated amphiphiles are described. The thiols were devised to form a perfluorinated region close to the gold surface and to have a hydrophilic portion in contact with the bulk solvent to impart solubility in water. The monolayer protected clusters were prepared, in an homogeneous phase using sodium thiolates because of the low nucleophilicity of the alpha-perfluorinated thiols, and fully characterized with (1)H, (19)F NMR spectrometry, IR and UV-vis absorption spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Au NPs with core diameters ranging from 1.6 to 2.9 nm, depending on the reaction conditions, were obtained. Water-soluble NPs (MPC-F8-PEGs) were obtained with the thiol HS-F8-PEG ending with a short poly(ethylene glycol) unit (PEG-OMe 550), whereas thiols with shorter PEG chains give rise to NPs insoluble in water. MPC-F8-PEGs undergo an exchange reaction with amphiphilic alkyl thiols. ESR investigations, using a hydrophobic radical probe, indicate that the MPC-F8-PEG monolayer shows a greater hydrophobicity compared to the analogous hydrogenated monolayer.     

Theoretical prediction of S-H bond rupture in methanethiol upon interaction with gold

Organic thiols are known to react with gold surface to form self-assembled monolayers (SAMs), which can be used to produce materials with highly attractive properties. Although the structure of various SAMs is widely investigated, some aspects of their formation still represent a matter of debate. One of these aspects is the mechanism of S-H bond dissociation in thiols upon interaction with gold. This work presents a new suggestion for this mechanism on the basis of DFT study of methanethiol interaction with a single gold atom and a Au(20) cluster. The reaction path of dissociation is found to be qualitatively independent of the model employed. However, the highest activation barrier of S-H bond dissociation on the single gold atom (12.9 kcal/mol) is considerably lower than that on the Au(20) cluster (28.9 kcal/mol), which can be attributed to the higher extent of gold unsaturation. The energy barrier of S-H cleavage decreases by 4.6 kcal/mol in the presence of the second methanethiol molecule at the same adsorption site on the model gold atom. In the case of the Au(20) cluster we have observed the phenomenon of hydrogen transfer from one methanethiol molecule to another, which allows reducing the energy barrier of dissociation by 9.1 kcal/mol. This indicates the possibility of the "relay" hydrogen transfer to be the key step of the thiol adsorption observed for the SAMs systems.     

Self-assembled organic monolayers terminated in perfluoroalkyl pentafluoro-lambda(6)-sulfanyl (-SF5) chemistry on gold

Recently synthesized (Winter, R.; Nixon, P. G.; Gard, G. L.; Radford, D. H.; Holcomb, N. R.; Grainger, D. W. J. Fluorine Chem. 2001, 107, 23-30) SF5-terminated perfluoroalkyl thiols (SF5(CF2)nCH2CH2SH, where n = 2, 4, and 6) and a symmetric SF5-terminated dialkyl disulfide ([SF5-CH=CH-(CH2)8-S-]2) were assembled as thin films chemisorbed onto gold surfaces. The adsorbed monolayer films of these SF5-containing molecules on polycrystalline gold were compared using ellipsometry, contact angle, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and infrared spectroscopy (FTIR) surface analytical methods. The resulting SF5-dialkyl disulfide monolayer film shows moderate angle dependence in depth-dependent XPS analysis, suggesting a preferentially oriented film. The SF5-terminated perfluoroalkyl thiols exhibit angular-dependent XPS compositional variance depending on perfluoroalkyl chain length, consistent with improved film assembly (increasingly hydrophobic, fewer defects, and more vertical chain orientation increasing film thickness) with increasing chain length. Tof-SIMS measurements indicate that both full parent ions for these film-forming molecules and the unique SF5 terminal group are readily detectable from the thin films without substantial contamination from other adsorbates.     

Cooperative Ligands in Dissolution of Gold

Development of new, environmentally benign dissolution methods for metallic gold is driven by needs in the circular economy. Gold is widely used in consumer electronics, but sustainable and selective dissolution methods for Au are scarce. Herein, we describe a quantitative dissolution of gold in organic solution under mild conditions by using hydrogen peroxide as an oxidant. In the dissolution reaction, two thiol ligands, pyridine-4-thiol and 2-mercaptobenzimidazole, work in a cooperative manner. The mechanistic investigations suggest that two pyridine-4-thiol molecules form a complex with Au⁰ that can be oxidized, whereas the role of inexpensive 2-mercaptobenzimidazole is to stabilize the formed Au^I species through a ligand exchange process. Under optimized conditions, the reaction proceeds vigorously and gold dissolves quantitatively in two hours. The demonstrated ligand-exchange mechanism with two thiols allows to drastically reduce the thiol consumption and may lead to even more effective gold dissolution methods in the future.