The effect of substituents of immobilized Rh complexes on the asymmetric hydrogenation of acetophenone derivatives

Using a modified Augustine’s method variously substituted Rh complexes were anchored on Al₂O₃ support. The prepared catalysts were characterized by spectroscopic methods and were applied in the hydrogenation of several acetophenone derivatives (p-CF₃-acetophenone, acetophenone, p-NH₂-acetophenone). Enantioselective C=O hydrogenations were observed with reasonable activity and selectivity on all heterogenized complexes, e.e. up to 80%. At the same time the immobilized samples showed the advantages of the heterogeneous systems: easy handling and recyclability.      

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Über die Zusammensetzung des Pyrolysates von Weihrauch “Aden”, dem Gummiharz vonBoswellia carteri Birdw., 3. Mitt.

1,2,4-Trihydroxy-p-menthane (1) was isolated from the pyrolytic products of incense Aden (gum resin ofBoswellia carteri Birdw.) The relative and absolute configuration of1 was established on the basis of spectral and chemical evidences and also confirmed independently by partial synthesis.

2. Mitt.:Pailer, M. Scheidl, O., Gutwillinger, H., Klein, E., Obermann, H., Mh. Chem.112, 595 (1981).     

Spectrophotometeric determination of someN-substituted phenothiazine derivatives usingN-bromophthalimide

A simple, rapid and sensitive spectrophotometric method is described for the quantitative determination ofN-substituted phenothiazines. The method depends on the formation of a stable phenothiazine free radical cation by the use ofN-bromophthalimide as oxidising agent in a strong acid medium (methanol/ sulphuric acid 1 1 v/v). The produced red or violet color possesses absorption maximum range from 500 to 530 nm. A linear relationship exists between the absorbance at (_max) and concentration in the range 5 to 40 g ml^–1 with apparent molar absorptivities range from 6 × 10³ to 12 × 10³1 mol^–1 cm^–1. The color is developed instantaneously for all the studied phenothiazines except for thioproperazine mesylate, trifluoperazine dihydrochloride and prochlorperazine mesylate that require 25, 15 and 25 min, respectively, for complete reaction. The developed colors are stable over 24 h. The average % recovery is 99.85±0.61 to 100.28±0.95. The method was applied successfully to the microdetermination of chlorpromazine HCl, promethazine HCl, pericyazine, thioproperazine mesylate, perphenazine, prochlorperazine mesylate, trimeprazine tartrate and trifluoperazine 2HCl either in pure form or incorporated in their pharmaceutical preparations. The results of analysis are in good agreement with those of the official B.P. 1988 and USP XXII.     

On the excited states ofp-quinones and an interpretation of the photocycloaddition ofp-quinones to alkenes

A theoretical investigation is made of the electronic states ofp-benzoquinone (PBQ), methyl substituted PBQ's and 1,4-naphthoquinone (NQ). In accord with experiment, the lowest triplet state of PBQ is calculated to be³ B _1g (n, *), while that for duroquinone (DQ) is³ B _3g (, *). The electron densities of these states are consistent with the hypothesis that³ n, * states lead to oxetan formation and³, * states to cyclobutanes. It is predicted that trimethyl PBQ might form both adducts, as the two states are calculated to be nearly degenerate.The photochemistry of NQ is more complex. The lowest excited triplet state is calculated to be ofn, * symmetry, in accord with experiment; however, several other states are predicted near in energy, and the photochemistry cannot be rationalized unambiguously.This work was supported in part by the National Research Council of Canada.     

Determination ofo-Cresol Red in Xylenol Orange and semi-Xylenol Orange by third-order derivative spectrophotometry

A new method is proposed for the determination ofo-Cresol Red in Xylenol Orange and semi-Xylenol Orange by third-order derivative spectrophotometry at 491 nm in a medium of 0.09 mol/1 sulphuric acid. A linear relationship exists between d³A/d³ and theo-Cresol Red concentration (1–12 g/ml), with a standard deviation of 0.11 g/ml (n = 8) for 10 g/ml ofo-Cresol Red.Presented at the 34th IUPAC Conference (1993)     

Flow injection-spectrophotometric determination of cresol compounds in water by reaction withp-aminophenol

A spectrophotometric method has been developed for the simultaneous determination ofo-cresol andm-cresol in water by reaction withp-aminophenol (PAP). Three different methodologies have been assayed; (i) batch analysis, after reaction in an alkaline medium in the presence of dissolved molecular oxygen as oxidizing agent, (ii) a stopped-flow procedure, carried out in the presence of KIO₄ and (iii) a flow injection method based on the same approach. The batch procedure requires 22 min for the full development of colour witho-cresol and 12 min form-cresol. In the stopped-flow mode, using KIO₄ and a reaction time of 12 min, better sensitivity can be obtained for both compounds and limits of detection of 10 g 1^–1 foro-cresol and 30 g 1^–1 form-cresol were found. The flow injection method has a lower sensitivity but permits more than 80 injections per hour. Based on the different maximum absorbance wavelengths obtained for the reaction products of PAP witho-cresol (614 nm) andm-cresol (632 nm), both compounds can be simultaneously determined in water samples and recoveries of 90 to 115% were found in spiked water samples of different types.     

Estimated ionicB-coefficients from NMR measurements in aqueous electrolyte solutions

¹⁷O-NMR spin-lattice relaxation timesT ₁ of D₂O molecules were measured at 5–85°C in D₂O solutions of alkali metal halides (LiClCsCl, KBr, and KI), DCl, KOD, Ph₄PCl, NaPh₄B, and tetraalkylammonium bromides (Me₄NBrAm₄NBr) in the concentration range 0.1–1.4 mol-kg^–1 TheB-coefficients of the electrolytes obtained from the concentration dependence of relaxation ratesR ₁=1/T₁ were divided into the ionicB-coefficients by three methods: (i) the assumption ofB (K⁺)=B(Cl^–), (ii) the assumption ofB(Ph₄P⁺)=B(Ph₄B^–), and (iii) the use ofB(Br^–) obtained from a series ofB(R₄NBr). It was found that Methods (ii) and (iii) resulted in an abnormal temperature dependence of theB-coefficients of alkali metal ions and a negative values of rotational correlation times _c at lower temperatures for hydroxide and halide ions. These results suggest that the methods based on the van der Waals volume are not adequate for the ionic separation of NMRB-coefficients. From the analysis using the assumption ofB(K⁺)=B(Cl^–), it was found that D₃O⁺, OD^–, and Me₄N⁺ ions are the intermediates between structure makers and breakers, and that the hydrophobicity of phenyl groups is weaker than that of alkyl groups due to the interactions between water molecules and -electrons in phenyl groups.     

Differentiation between o- and p-quinol/quinone functionality with a simple test using cyclic voltammetry

Complexation with boric acid combined with cyclic voltammetry serves to prove theo-quinol/quinone functionality in emmotin H (1) and I (2). Supported by similar investigation of four reference compounds the method is suggested as a quick and reliable test ofo-quinol/quinone functionality and for differentiation fromp-quinol/quinone functionality. Voluminous groups such as 2-isopropanolyl ino-position do not interfere with the complex formation. The test requires quantities of materials in the order of 10 to 100g.     

Cubic-grid Gaussian basis sets for electron scattering calculations IV

Summary An analytical formula has been derived for averaging the differential cross section for electron scattering with respect to isotropic target molecule orientation. It may be applied to any type ofT-matrix element k ^out|T|k ⁱⁿ in which the plane-wave functionsk ^out andk ⁱⁿ are expanded in a set ofs-type Gaussian functions. The formula for averaging was tested against results obtained by Monte-Carlo-type calculations and against experimental data for elastic electron scattering by the H₂ molecule.     

Change in the reactivity of di-tert-butyl peroxide during homolysis with an increase in the degree of conversion and pressure

It was found that the differential reactivity (k _d ) of di-tert-butyl peroxide (DTBP) in a solution of 2-methoxy-(1) and 2-ethoxytetrahydropyran (2) at 130°C and pressuresp=20 and 1000 MPa is a periodic function of the degree of conversion, arbitrarily measured by the concentration oftert-butyl alcohol (TBA) formed. The functionk _d =F([TBA]) was calculated with the spline approximation (SA) of the experimental [TBA] as a function of the reaction time , giving a continuous curve of d[TBA]/d as a function of . The integral reactivityk _d =G([TBA]) calculated with the kinetic equation for a first-order reaction for decomposition of DTBP in1, 2, 1 + C ₆ H ₆ and2 + C ₆ H ₆ in three segments of in the range ofp=20–1000 MPa changes differently with an increase in the degree of conversion for differentp. The volume activation effects ( ) determined by SA of the experimental lnk _d as a function ofp were calculated for close degrees of conversion, [TBA]=0.1–0.14M. The as a function ofp obtained were compared with the similarly processed published data on decomposition of DTBP inn-heptane and dicumyl peroxide (DCP) in different aromatic solvents. The results were attributed to the effect of the type of packing of the solvent molecules surrounding the reacting molecule on the reactivity of the peroxide and not to the effect of radical recombination in the primary cage.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, Moscow 117913. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 829–837, April, 1992.     

Synthesis and molecular structures of the racemate and themeso-form of 2,2′-propylidene-bis(η5-indenyl)zirconium dichloride

A mixture ofrac- andmeso-2,2-propylidene-bis(⁵-indenyl)zirconium dichlorides was obtained in 95% yield. The compounds were separated, and their structures were established by X-ray structural analysis.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 765–766, March, 1996.     

Exo-H- andendo-H-η4-pentamethylcyclopentadiene complexes of platinum

A mixture ofendo-H andexo-H isomers (1a and1b) of the (⁴-C₅Me₅H)PtCl₂ complex was prepared by the reaction of K₂PtCl₄ with C₅Me₅H in MeOH. The mixture of isomers reacts with CpTl in the presence of TiBF₄ to give a novel complex, [(⁴-C₅Me₅H)Pt(⁵-C₅H₅)]⁺BF₄ ^–, as a mixture ofendo-H- andexo-H-isomers (2a and2b). The data of¹H and¹³C NMR spectroscopy of the resulting complexes are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 514–517, March, 1994.     

Reatarding effect of nitrogen ylide for the polymerization of N-vinyl pyrrolidone

-Picolinium-p-chlorophenacylide (-PCFY) acts as a retarder for polymerization of N-vinyl pyrrolidone. The polymerization runs were carried out at 60°C using benzene as an inert solvent. The kinetic equation for the present system may be written asR _p [-PCPY]^–1.0 [AIBN]^0.66[N-VP]^1.0. The value of overall energy of activation for polymerization in presence and absence of-PCPY was computed as 44.0 and 42.3 kJ mol^–1, respectively. The inverse relationship ofR _p and¯M _v with-PCPY suggests that-PCPY acts as a polymerization retarder. The retarding effect is also evidenced by higher initiator exponent value and higher value of energy of activation in presence of ylide. A mechanism is also proposed in which polymer propagating chain combines with one ylide component to give resonance stabilized radical.     

Amperometric determination of live <Emphasis Type="Italic">Escherichia coli</Emphasis> using antibody-coated paramagnetic beads

Detecting and enumerating fecal coliforms, especially Escherichia coli, as indicators of fecal contamination, are essential for the quality control of supplied and recreational waters. We have developed a sensitive, inexpensive, and small-volume amperometric detection method for E. coli -galactosidase by bead-based immunoassay. The technique uses biotin-labeled capture antibodies (Ab) immobilized on paramagnetic microbeads that have been functionalized with streptavidin (bead–Ab). The bead–Ab conjugate captures E. coli from solution. The captured E. coli is incubated in Luria Bertani (LB) broth medium with the added inducer isopropyl -D-thiogalactopyranoside (IPTG). The induced -galactosidase converts p-aminophenyl -D-galactopyranoside (PAPG) into p-aminophenol (PAP), which is measured by amperometry using a gold rotating disc electrode. A good linear correlation (R²=0.989) was obtained between log cfu mL^–1 E. coli and the time necessary to product a specific concentration of PAP. Amperometric detection enabled determination of 2×10⁶ cfu mL^–1 E. coli within a 30 min incubation period, and the total analysis time was less than 1 h. It was also possible to determine as few as 20 cfu mL^–1 E. coli under optimized conditions within 6–7 h. This process may be easily adapted as an automated portable bioanalytical device for the rapid detection of live E. coli.     

Ionic interactions in aqueous electrolyte-polyelectrolyte mixtures: Comparisons with mixtures of sodium chloride with the model electrolyte sodiumpara-ethylbenzenesulfonate at 25°C

Osmotic coefficients for aqueous mixtures of sodium chloride with sodiumpara-ethylbenzenesulfonate NapEBS and lithiumpara-ethylbenzenesulfonate LipEBS with NapEBS obtained by the gravimetric isopiestic vapor pressure comparison method are interpreted with the Scatchard neutral-component and with the Pitzer ion-component equations. Ionic and mean ionic activity coefficients for Na⁺ and Cl^– ions and for NaCl, respectively, were also determined with an electrochemical cell. The ±(NaCl) values at constant unit ionic strength,I=1.00, were compared with those computed from osmotic-coefficient measurements. Strong anion-anion interactions were observed in the NaCl-NapEBS mixtures.     

Terpenes in organic synthesis

A seven-step synthesis ofS-(+)-hydroprene (S-1) in 20 % overall yield starting fromS-(+)-3,7-dimethyl-1,6-octadiene (2) of 55+-10 % optical purity is described. The introduction of an optical enhancement step in the synthetic sequence at the stage ofS-(–)-3,7-dimethyl-1-octanol (9) raises the optical purity ofS-1 from 50 % to 80 %.For part 13, see. ref.¹ Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 342–348, February, 1993.     

Calixarenes 11. Crystal and molecular structure ofp-tert-butylcalix[8]arene

Monoclinic prisms were obtained by slow evaporation of a pyridine solution ofp-tert-butylcalix[8]arene: space groupP2₁/c,a=20.312(3),b=23.020(2),c=20.006(6) ; =113.05(2)⁰;V=8707.6 ų;Z=4. Refinement led to anR value of 0.166 for 4231 reflections which, although high, is sufficient to establish the conformation of the molecule as a pleated loop in which the eight hydroxyl groups are arranged in a slightly undulating, almost planar, intramolecularly hydrogen bonded cyclic array. The possible inferences for the conformation ofp-tert-butylcalix[8]arene in solution are discussed. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82019.     

Differential calorimetric enthalpies of adsorption ofp-xylene andm-xylene on y faujasites at 25°C

The differential enthalpies of adsorption ofp-xylene andm-xylene on NaY, KY and BaY zeolites were measured by isothermal calorimetry coupled with isothermal volumetry at 25C. Whatever the zeolite, the enthalpies of adsorption ofp-xylene andm-xylene at low filling were of the same order of magnitude. They did not show significantly the effect of the dipolar moment ofm-xylene. Their absolute values varied in the sequence Q ₀(pX/NaY)<Q ₀(pX/KY) =Q ₀(mX/KY)<Q ₀(pX/BaY)<Q ₀(mX/NaY) =Q ₀(mX/BaY)During the adsorption of the third molecule of xylene per -cage, BaY zeolite exhibited specific behaviour: the differential enthalpies of adsorption decreased with the filling of the -cages in such a way that they became lower than those of the other two zeolites. Some arguments concerning the structures of the zeolite and xylene molecules can explain such behaviour. Whatever the zeolite, the adsorption capacity of the -cages was 3.5 molec.^–1. For relative pressures ranging from 0.2 to 0.5, an additional adsorption of about 0.1 molec.^–1 occurred on the external surface.     

Direct anodic oxidation ofp-methoxytoluene in methanol. The effect of electrolysis conditions

The effect of anions of the supporting electrolyte (F^–, dialkylphosphate, TsO^–, and BF ₄ ^– and other electrolysis conditions (anode material, temperature, substrate concentration) on the selectivity of the direct anodic oxidation ofp-methoxytoluene in methanol into 4-methoxybenzaldehyde dimethylacetal was studied. The highest selectivity was obtained in the presence of fluoride anion.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 524–527, March, 1995.This work was financially supported by the Ministry of Science, High School and Technical Policy of the Russian Federation within the scope of the State scientific-technical program Ecologically harmless processes of chemistry and chemical technology (project No. 1.140 Low-tonnage chemical products) and by the International Science Foundation (Grant Ch-2-1246-0923).