Determination of trace quaternary ammonium surfactants in water by combining solid-phase extraction with surface-assisted laser desorption/ionization mass spectrometry.

This study demonstrates the feasibility of combining solid-phase extraction (SPE) with surface-assisted laser desorption/ionization (SALDI) mass spectrometry to determine trace quaternary ammonium surfactants in water. The trace surfactants in water were directly concentrated on the surface of activated carbon sorbent in SPE. The activated carbon sorbent was then mixed with the SALDI liquid for SALDI analysis. No SPE elution procedure was necessary. Experimental results indicate that the surfactants with longer chain alkyl groups exhibit higher sensitivities than those with shorter chain alkyl groups in SPE-SALDI analysis. The detection limit for hexadecyltrimethylammonium bromide is around 10 ppt in SPE-SALDI analysis by sampling 100 mL of aqueous solution, while that of tetradecyltrimethylammonium bromide is about 100 ppt. The detection limit for decyltrimethylammonium bromide and dodecyltrimethylammonium bromide is in the low-ppb range.     

Sensitivity enhancement for nitrophenols using cationic surfactant-modified activated carbon for solid-phase extraction surface-assisted laser desorption/ionization mass spectrometry

Previous work has demonstrated that a combination of solid-phase extraction with surface-assisted laser desorption/ionization (SPE-SALDI) mass spectrometry can be applied to the determination of trace nitrophenols in water. An improved method to lower the detection limit of this hyphenated technique is described in this present study. Activated carbon powder is used as both the SPE adsorbent and the SALDI solid in the analysis by SPE-SALDI. The surface of the activated carbon is modified by passing an aqueous solution of a cationic surfactant through the SPE cartridge. The results demonstrate that the sensitivity for nitrophenols in the analysis by SPE-SALDI can be improved by using cationic surfactants to modify the surface of the activated carbon. The detection limit for nitrophenols is about 25 ppt based on a signal-to-noise ratio of 3 by sampling from 100 mL of solution.     

A novel approach of combining thin-layer chromatography with surface-assisted laser desorption/ionization (SALDI) time-of-flight mass spectrometry

A novel means of combining thin-layer chromatography (TLC) with laser desorption/ionization mass spectrometry using a liquid matrix is proposed. Surface-assisted laser desorption/ionization (SALDI) mass spectrometry, which uses a mixture of a micrometer-sized carbon powder (graphite or activated carbon, the SALDI solid) and 15% sucrose/glycerol, dissolved in an equal volume of methanol (SALDI liquid) as a SALDI matrix, is used for laser desorption mass analysis. The ablation of carbon powder from a pencil drawing was used as an alternative to the SALDI solid. The liquid matrix resembled that used in a conventional SALDI matrix system. A line was drawn before separation with a pencil on the track of the sample developed on the TLC plate. After TLC separation, approximately 0.1 microl of SALDI liquid was directly applied to the chromatographic spots on the TLC plate. Porphyrins were used to demonstrate this combination owing to the visible colors of this type of compound. The analyte signal can be easily detected by irradiating the laser along the pencil line on the TLC plate. An additive, p-toluenesulfonic acid, is added to the SALDI liquid to enhance the signal's intensity. This additive dramatically improves the signal-to-noise ratio. A detection limit of approximately 500 pg is demonstrated for porphines, which is 50 times better than that corresponding to conventional TLC SALDI.     

Carbon nanocoatings: A new approach to recording mass spectra of low-molecular compounds using surface-assisted laser desorption/ionization mass spectrometry

A simple and rapid approach to obtaining target plates for the investigation of low-molecularweight compounds by surface-assisted laser desorption/ionization (SALDI) mass spectrometry is proposed. It consists in the vacuum sputtering of a carbon layer with a thickness of about 50 nm onto a metal surface. The resulting coatings are characterized by homogeneity, hydrophobicity, and high mechanical strength, which eliminates a possibility of mass spectrometer contamination. A comparison of the SALDI mass spectra of test compounds recorded using conventional carbon materials and carbon nanocoatings demonstrates advantages of the last named materials, such as high spectral resolution and the absence of spectral interferences at low m/z values.     

Comparison of solid-phase extraction and micro-solid-phase extraction for liquid chromatography/mass spectrometry analysis of pesticides in water samples

Our recent on-line solid-phase extraction (SPE) device for micro-liquid chromatography, known as micro-solid-phase extraction (microSPE), was compared with traditional SPE for the analysis, from aqueous samples, of 4 pesticides belonging to different classes. Two different kinds of adsorbents, C18 and graphitized carbon black, were tested. A 2-stage ion trap mass spectrometer, equipped with homemade microflow electrospray ion (ESI) source, was used. Detection limits with a signal-to-noise ratio of 3:1 for both extraction methods were in the range of 0.1 microg/L for all compounds. However, better recoveries were obtained when microSPE traps were used.     

Comparison of the Enrichment Efficiency of Multiwalled Carbon Nanotubes, C18 Silica, and Activated Carbon as the Adsorbents for the Solid Phase Extraction of Atrazine and Simazine in Water Samples

Multiwalled carbon nanotubes with exceptional merits as SPE adsorbents for enrichment of environmental pollutants have absorbed much attention. The goal of this paper was to make a comparison with it and regular adsorbents such as C18 silica and activated carbon in the extraction capacity of atrazine and simazine. The results indicated that multiwalled carbon nanotubes were very suitable for determination of atrazine and simazine because of an enrichment performance similar to that of C18 silica. In contrast, the spiked recovery of simazine was higher than that of atrazine using multiwalled carbon nanotubes as packing material for SPE. However, reverse results were obtained when the extraction was performed with packing of C18 silica. Moreover, as the extraction of simazine was concerned, multiwalled carbon nanotubes were much better than C18 silica. As for the enrichment of atrazine, C18 silica achieved greater extraction factor than multiwalled carbon nanotubes. Activated carbon did not give the expected extraction efficiency because of its large size and blank volume and less active sites for adsorption. All these experimental results indicated that multiwalled carbon nanotubes could be used as a valuable alternative adsorbent for SPE of atrazine and simazine in many real water samples.     

Determination of the pesticides considered as endocrine-disrupting compounds (EDCs) by solid-phase extraction followed by gas chromatography with electron capture and mass spectrometric detection

An SPE method followed by GC-electron capture detection (ECD) with confirmation by MS for the trace determination of four pesticides considered as endocrine-disrupting compounds (EDCs) in natural waters and sediments has been developed. Target analytes, fenarimol, fenvalerate, pendimethalin, and vinclozolin, belong to different chemical groups and are used mainly in agriculture. In the present study, analysis employs an offline SPE step for the extraction of the target analytes from natural waters. Sonication and subsequent SPE clean-up was used for extraction and purification of the sediment samples which were finally treated with activated copper powder. The type of SPE disk, eluents as well as solution parameters including pH value, and concentrations of salts and humic substances were examined for the efficiency of the method. The recoveries of all pesticides were in relatively high levels, ranging from 75 to 97% for waters and 71 to 84% for sediment samples. Both methods were applied to real water and sediment samples and the presence of the tested compounds was investigated.     

On-line solid phase extraction LC-MS/MS analysis of pharmaceutical indicators in water: A green alternative to conventional methods

A method using automated on-line solid phase extraction (SPE) directly coupled to liquid chromatography/tandem mass spectrometry (LC-MS/MS) has been developed for the analysis of six pharmaceuticals by isotope dilution. These selected pharmaceuticals were chosen as representative indicator compounds and were used to evaluate the performance of the on-line SPE method in four distinct water matrices. Method reporting limits (MRLs) ranged from 10 to 25 ng/L, based on a 1 mL extraction volume. Matrix spike recoveries ranged from 88 to 118% for all matrices investigated, including finished drinking water, surface water, wastewater effluent and septic tank influent. Precision tests were performed at 50 and 1000 ng/L with relative standard deviations (RSDs) between 1.3 and 5.7%. A variety of samples were also extracted using a traditional off-line automated SPE method for comparison. Results for both extraction methods were in good agreement; however, on-line SPE used approximately 98% less solvent and less time. On-line SPE coupled to LC-MS/MS analysis for selected indicators offers an alternative, more environmentally friendly, method for pharmaceutical analysis in water by saving time and costs while reducing hazardous waste and potential environmental pollution as compared with off-line SPE methods.     

An activated carbon substrate surface for laser desorption mass spectrometry

A method to obtain laser desorption/ionization mass spectra of organic compounds by depositing sample solutions onto a carbon substrate surface is demonstrated. The substrate consists of a thin layer of activated carbon particles immobilized on an aluminum support. In common with the porous carbon suspension samples used in previous “surface-assisted laser desorption/ionization” (SALDI) work, the mass spectra contain only a few “matrix” background ion peaks, minimizing interference with analyte ion peaks. The presence of glycerol ensured that the ion signals were stable over hundreds of laser shots. In addition, the carbon substrate surface has several advantages over the suspension samples. The use of a very thin layer of carbon significantly improves the sensitivity. Detection limits range from attomoles for crystal violet to femtomoles for bradykinin. Very little sample preparation is required as the analyte solution is simply pipetted onto the substrate surface and glycerol added. When using an alternate sample deposition method, a mass resolution for bradykinin of 1800 is achieved in linear time-of-flight mode. This is close to the resolution limit set by the detector system and above instrument specification for matrix-assisted laser desorption/ionization mass spectra.     

Sensitive determination of amide herbicides in environmental water samples by a combination of solid‐phase extraction and dispersive liquid–liquid microextraction prior to GC–MS

In this paper, solid‐phase extraction (SPE) in combination with dispersive liquid–liquid microextraction (DLLME) has been developed as a sample pretreatment method with high enrichment factors for the sensitive determination of amide herbicides in water samples. In SPE–DLLME, amide herbicides were adsorbed quantitatively from a large volume of aqueous samples (100 mL) onto a multiwalled carbon nanotube adsorbent (100 mg). After elution of the target compounds from the adsorbent with acetone, the DLLME technique was performed on the resulting solution. Finally, the analytes in the extraction solvent were determined by gas chromatography–mass spectrometry. Some important extraction parameters, such as flow rate of sample, breakthrough volume, sample pH, type and volume of the elution solvent, as well as salt addition, were studied and optimized in detail. Under optimum conditions, high enrichment factors ranging from 6593 to 7873 were achieved in less than 10 min. There was linearity over the range of 0.01–10 μg/L with relative standard deviations of 2.6–8.7%. The limits of detection ranged from 0.002 to 0.006 μg/L. The proposed method was used for the analysis of water samples, and satisfactory results were achieved.     

固相萃取吸附材料在植物激素样品前处理中的应用新进展

植物激素在植物生长过程中具有重要作用,调节植物生长、发育及抗逆的各个过程。植物激素超微精准定量分析一直是植物生理学研究的瓶颈问题。植物激素的准确、高效检测目前大多是基于液相色谱-串联质谱联用技术。样品前处理是植物激素色谱-质谱分析中必不可少的一个步骤,直接影响后续检测方法的灵敏度和准确性。在植物激素各种前处理方法中,固相萃取(SPE)技术应用非常广泛。在萃取小柱基础上发展了多种新形式(分散固相萃取、磁性固相萃取、固相微萃取等,称之为SPE相关方法)。在上述SPE相关方法中,吸附材料的选择均是关键因素,决定了样品前处理过程的目标物提取、净化和富集效果。碳基材料(包括碳纳米管、石墨烯、碳氮化合物等)和有机骨架材料(包括金属有机骨架、共价有机材料)拥有结构可设计、比表面积大、稳定性良好等特性,非常适合作为吸附材料。分子印迹聚合物和超分子化合物依靠主-客体特异性分子识别作用,能显著提高样品前处理方法的选择性。本文重点针对植物激素样品前处理中的SPE技术,综述了近5年来上述几类功能化吸附材料的最新应用进展,并对其发展趋势进行展望。     

Liquid chromatography-electrospray ionization isotope dilution mass spectrometry analysis of paraquat and diquat using conventional and multilayer solid-phase extraction cartridges

The performance of alkyl-silica sorbent packed solid-phase extraction (SPE) cartridges and a mixed-mode, polymeric sorbent packed SPE cartridge (resin SPE cartridge) were evaluated for the sample preparation of paraquat and diquat in environmental water and vegetation matrices. Also the recoveries of the native and 2H-labeled paraquat and diquat were correlated to validate that the 2H-labeled species can be used for the isotopic dilution mass spectrometry (IDMS) analysis of paraquat and diquat. The results show that the extraction efficiency of alkyl-silica SPE is dependent on the carbon loading of the sorbent and deteriorates with an increasing sample pH. The resin SPE cartridge required no pH adjustment and showed excellent correlation between the native and 2H-labeled species, therefore, allowing us to develop the first liquid chromatography-electrospray ionization IDMS analytical method for the analysis of paraquat and diquat in environmental water and vegetation matrices. Method detection limits derived using standard EPA protocol were 0.2 and 0.1 microg/l for paraquat and diquat in water matrices, and 0.02 and 0.01 microg/g in vegetation matrices, respectively.     

SALDI-MS Signal enhancement using oxidized graphitized carbon black nanoparticles

The signal intensity of low-molecular-weight compounds analyzed using surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF-MS) was significantly enhanced when oxidized graphitized carbon black (GCB) particles were used as the desorption/ionization surface. The surface of oxidized GCB contains more carboxylic acid groups than non-oxidized GCB. Carboxylic acid groups enhance the efficiency of the ionization process and the desorption of more hydrophobic compounds. A common pharmaceutical compound, propranolol, was successfully extracted from Baltic Sea blue mussels and quantified using oxidized GCB as the SALDI surface, whereas deuterated propranolol was used as the internal standard. The calibration curve showed a wide linear dynamic range of response (0.1–20 μg/mL) and good reproducibility (RSD < 10%). It was not possible to detect propranolol in Baltic Sea blue mussels when non-oxidized GCB was used as the SALDI surface.     

Comparison of dialysis and solid-phase extraction for isolation and concentration of dissolved organic matter prior to Fourier transform ion cyclotron resonance mass spectrometry

We compare two methods, solid-phase extraction (SPE) and dialysis, commonly used for extraction and concentration of dissolved organic matter (DOM) prior to molecular characterization by electrospray ionization (ESI) and ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry. Spectra of DOM samples from Minnesota and Sweden peatlands that were extracted with styrene divinyl benzene polymer SPE sorbents included ions with formulas that had higher oxygen to carbon (O/C) ratios than spectra of DOM from the same samples after de-salting by dialysis. The SPE method was not very effective in extracting several major classes of DOM compounds that had high ESI efficiencies, including carboxylic acids and organo-sulfur compounds, and that out-competed other less-functionalized compounds (e.g., carbohydrates) for charge in the ESI source. The large abundance of carboxylic acids in the dialysisextracted DOM, likely the result of in situ microbial production, makes it difficult to see other (mainly hydrophilic) compounds with high O/C ratios. Our results indicate that, while dialysis is generally preferable for the isolation of DOM, for samples with high microbial inputs, the use of both isolation methods is recommended for a more accurate molecular representation.     

SPE – Microwave‐assisted extraction coupled system for the extraction of pesticides from water samples

SPE is a commonly applied technique for preconcentration of pesticides from water samples. Microwave‐assisted extraction (MAE) technique is the extraction applied for preconcentration of different compounds from solid samples. SPE coupled with MAE is capable of preconcentrating these compounds from water samples too. This investigation was aimed at improving the efficiency of atrazine, alachlor, and α‐cypermethrin pesticide extraction from the spiked water samples applying SPE followed by MAE. In this way, MAE served for elution of pesticides from C₁₈‐extraction disks with solvent heated by microwave energy. Various elution conditions were tested for their effects on the extraction efficiency of the SPE–MAE combined technique. Several parameters, such as elution solvent volume (mL), elution temperature (°C), and duration of elution (min), affect the extraction efficiency of the SPE–MAE coupled system and need to be optimized for the selected pesticides. In order to develop a mathematical model, 15 experiments were performed in the central composite design. The equation was then used to predict recoveries of the pesticides under specific experimental conditions. Optimization of microwave extraction was accomplished using the genetic algorithm approach. Best results were achieved using 20 mL of ethanol at 60°C. Optimal hold time was 5 min and 24 s. The SPE–MAE combination was also compared with the conventional SPE extraction technique with elution of a nonpolar or a moderately polar compound with nonpolar solvents.     

beta-Cyclodextrin-bonded silica particles as the solid-phase extraction medium for the determination of phenol compounds in water samples followed by gas chromatography with flame ionization and mass spectrometry detection

A new absorbent for solid-phase extraction (SPE) was prepared by a beta-cyclodextrin bonded silica stationary phase (CDS) has been applied to determine the concentrations of phenol compounds in water samples. SPE of selected phenolic compounds from aqueous samples were performed using 250 mg CDS. The determination was subsequently carried out by gas chromatography-flame ionization detection (GC-FID) and gas chromatography-mass spectrometry (GC-MS). Compared with available SPE, the CDS showed high sensitivity and fast velocity of mass transfer for phenolic compound because of its porous structure of beta-cyclodextrin. The relative standard deviation (RSD) for river water sample spiked with phenolic compounds at sub-ppb level was lower than 10% and limit of detection (LOD) for these compounds were between 10 and 100 ng l(-1).     

Determination of rhenium and osmium complexes by surface-assisted laser desorption/ionization coupled to Orbitrap mass analyzer

A surface-assisted laser desorption/ionization (SALDI) source is coupled to the Orbitrap mass analyzer; the instrumental approach is tested for the analysis of rhenium (Re) and osmium (Os) complexes with 8-mercaptoquinoline. Silicon (Si) material obtained by laser treatment of monocrystalline Si is used as SALDI substrate. All studied complexes are detected as radical cations, with no protonated molecules. The comparison of SALDI, matrix-assisted laser desorption/ionization (MALDI), and direct laser desorption/ionization (LDI) on metal plates in the same instrumental setup demonstrated that the detection of the studied complexes using SALDI provides the highest sensitivity. The ability to analyze samples rapidly, high purity of spectra, and good analytical parameters make SALDI coupled to the Orbitrap mass analyzer a potentially powerful tool for the detection of Re and Os complexes and related organic, UV-absorbing compounds.

Selectivity of solid-phase extraction phases in the determination of biodegradation products

The extraction techniques connected with gas chromatography were used to describe quantitatively and qualitatively the biodegradation process. We investigated the biodegradation of hydrocarbons and non-ionic surfactants. Solid-phase extraction (SPE) and liquid-liquid extraction were used for the isolation of the non-degraded compounds and their degradation products. The selectivity of SPE has a significant influence on the isolation and preconcentration of organic compounds from water.     

On the role of defects and surface chemistry for surface-assisted laser desorption ionization from silicon

The generation of ions from silicon substrates in surface-assisted laser desorption ionization (SALDI) has been studied using silicon substrates prepared and etched by a variety of different methods. The different substrates were compared with respect to their ability to generate peptide mass spectra using standard liquid sample deposition. The desorption/ionization processes were studied using gas-phase analyte deposition. Mass spectra were obtained from compounds with gas-phase basicities above 850 kJmol and with molecular weights up to 370 Da. UV, VIS, and IR lasers were used for desorption. Ionization efficiencies were measured as a function of laser fluence and accumulated laser irradiance dose. Solvent vapors were added to the ion source and shown to result in fundamental laser-induced chemical and physical changes to the substrate surfaces. It is demonstrated that both the chemical properties of the substrate surface and the presence of a highly disordered structure with a high concentration of "dangling bonds" or deep gap states are required for efficient ion generation. In particular, amorphous silicon is shown to be an excellent SALDI substrate with ionization efficiencies as high as 1%, while hydrogen-passivated amorphous silicon is SALDI inactive. Based on the results, a novel model for SALDI ion generation is proposed with the following reaction steps: (1) the adsorption of neutral analyte molecules on the SALDI surface with formation of a hydrogen bond to surface Si-OH groups, (2) the electronic excitation of the substrate to form free electron/hole pairs (their relaxation results in trapped positive charges in near-surface deep gap states, causing an increase in the acidity of the Si-OH groups and proton transfer to the analyte molecules), and (3) the thermally activated dissociation of the analyte ions from the surface via a "loose" transition state.     

Polar organic compounds in the river Elbe — Development of optimized concentration methods using substance-specific detection techniques

Different methods for solid phase extraction (SPE) of polar, organic compounds found in Elbe water were compared. Mass-spectrometric detection (MS) after liquid chromatographic separation (LC) or flow injection analysis (FIA) and thermospray ionization (TSP) was used to assess the concentration behaviour as well as the detection techniques. A selected compound was identified using tandem mass spectrometry (MS/MS) carrying out mixture analysis.