Determination of levoglucosan in atmospheric aerosols using high performance liquid chromatography with aerosol charge detection

A sensitive method for analysis of levoglucosan (1,6-anhydro-beta,d-glucopyranose) and other monosaccharide anhydrides, compounds present in biomass combustion smoke, was investigated employing high-performance liquid chromatography (HPLC) with recently developed aerosol charge detection. Aerosol charge detection involves the conversion of the column effluent to an aerosol, which is charged to produce a current. Use of a cation-exchange column and a pure water eluent was found to separate levoglucosan and mannosan from other aerosol components with a detection limit of about 90 ng mL(-1) for levoglucosan or 5 ng injected. This method was demonstrated by successful analysis of aerosol filter samples from three locations.     

Derivatization procedures and determination of levoglucosan and related monosaccharide anhydrides in atmospheric aerosols by gas chromatography-mass spectrometry

This study evaluated the derivatization procedures for detecting the three most commonly monosaccharide anhydrides (MAs) (levoglucosan, mannosan and galactosan) in atmospheric aerosols using gas chromatography-mass spectrometry (GC-MS). Various silylating agents, mainly trimethylsilylating agents (TMS), were compared and the effects of various contents of trimethylchlorosilane (TMCS, as a stimulator) were evaluated to optimize the conditions for detecting these compounds in aerosol samples. Differences among the abundances of the derivatives were caused by the sterical hindrance of three hydroxyl groups in the structures of monosaccharide anhydrides. The effects of the reaction time and temperature were also examined. The optimal reaction time and temperature were 60 min and 80 °C with 1% TMCS plus 0.2% 1,4-dithioerythritol (DTE). Under these conditions, the percentages of formation of bis-O-TMS derivatives (as by-products) were 23, 29 and 10% for galactosan, mannosan and levoglucosan, respectively. The concentrations of galactosan, mannosan and levoglucosan in particles of smoke samples ranged from 29 to 88, 23 to 69 and 77 to 380 ng/m³, respectively; and in particles of atmospheric aerosols ranged from 0.06 to 0.75, n.d. to 0.49 and 1.6 to 132 ng/m³, respectively. Levoglucosan was the dominant MAs detected in both type of samples. Less than 10% quantitation difference was obtained when bis-O-TMS derivatives were included in the calculation.     

Identification of levoglucosan and related steroisomers in fog water as a biomass combustion tracer by ESI-MS/MS

A conspicuous fraction of the water soluble organic compounds (WSOC) in fog and fine aerosol samples is composed by monosaccharide anhydrides, such as levoglucosan and its stereoisomers, galactosan and mannosan. Levoglucosan is produced exclusively during wood combustion processes, making it a very useful tracer for plant combustion emissions in the atmosphere. This paper describes a new experimental approach, based on electrospray-tandem mass spectrometry (ESI-MS/MS), for the identification of levoglucosan in fog water samples. The analytical method proposed allows to identify the specific sugar anhydrides directly in the liquid phase without the need of any derivatization process.     

ToF-SIMS analysis of chemical composition of atmospheric aerosols in Beijing

Atmospheric aerosols collected from each season in urban Beijing have been studied using time-of-flight secondary ion mass spectrometry (ToF-SIMS). The chemical composition of atmospheric aerosol particles during various atmospheric pollution levels was analyzed and distinguished by principal component analysis (PCA). The differences and sources of the components of the aerosol particles were explored. The results showed that the fine particulate matter from heavily polluted days mainly consists of inorganic salts and organic compounds, such as hydrocarbons, nitrogen- or sulfur-containing hydrocarbons, and their oxides. Samples collected from clean days in the four seasons were also analyzed. Only the samples collected in spring showed a significant difference from the other three seasons. We concluded that the main source of pollution in the Beijing urban area was fossil fuel combustion from motor vehicles.     

Determination of sugar compounds in atmospheric aerosols by liquid chromatography combined with positive electrospray ionization mass spectrometry

We here report a method for the determination of sugar compounds of known presence in atmospheric aerosols using liquid chromatography (LC) combined with positive electrospray ionization mass spectrometry (MS). The target analytes include C(3)-C(6) monosaccharide alcohols (glycerol, erythritol, xylitol, mannitol), C(5)-C(6) monosaccharides (xylose, glucose, and levoglucosan), a disaccharide (sucrose), and a trisaccharide (melezitose). A mobile phase consisting of 20% 10 mM aqueous ammonium acetate, 8% methanol, and 72% water was found to provide abundant [M+NH(4)](+) adduct ions when coupled with electrospray ionization. Use of a polymer-based amino analytical column resolved the target compounds from the bulk solvent and provided limited separation among the target compounds. The target analytes were quantified using their [M+NH(4)](+) ions. Sample pretreatment was greatly simplified in comparison with the more commonly used gas chromatographic methods. It involved extraction of aerosol filters in methanol, evaporation of the solvent, and reconstitution with 5 mM ammonium acetate in water prior to the LC-MS analysis. The analyte recoveries were measured at the levels of 100, 500 and 1000 microg/L to be in the range of 78-102%, 94-112%, and 92-110%, respectively. The detection limits were lower than 10 pmol/injection for the tested target compounds except for xylose. Xylose had a detection limit of 95 pmol/injection. The method was applied to analyze 30 atmospheric aerosol samples to demonstrate its feasibility. The LC-MS method made possible the detection of trisaccharides as aerosol constituents for the first time.     

Hydrophilic interaction chromatography with Fourier transform mass spectrometry of monosaccharide anhydrides

A fast, selective, and sensitive method for the determination of three monosaccharide anhydrides (galactosan, mannosan, levoglucosan), based on hydrophilic interaction chromatography and Fourier transform mass spectrometry, was successfully developed. The simple experimental stationary phase and mass spectrometry performance screening allowed the selection of the best available chromatographic and mass spectrometry conditions. Thus, the chromatographic separation was performed on a highly selective stationary phase containing a zwitterionic phosphorylcholine group and the monosaccharide anhydrides were detected as [M+HCOO]^? adduct in the negative mode. The method showed accuracy in the range of 84–111 and 89–102% with interbatch precision expressed as relative standard deviations of 5.6–15.4 and 5.0–9.0% for the aerosol extract and snow samples, respectively. The limit of quantification in absolute values ranged from 10 to 30 pg, the limit of quantification, expressed as concentration, ranged was 0.3–0.9 ng/m³ for aerosol and 10–20 ng/mL for snow samples. The method was successfully applied for the determination of monosaccharide anhydrides in aerosol and snow samples.     

High-performance anion-exchange chromatography–mass spectrometry method for determination of levoglucosan, mannosan, and galactosan in atmospheric fine particulate matter

Biomass burning has a strong influence on the atmospheric aerosol composition through particulate organic, inorganic, and soot emissions. When biomass burns, cellulose and hemicelluloses degrade, producing monosaccharide anhydrides (MAs) such as levoglucosan, mannosan, and galactosan. Therefore, these compounds have been commonly used as tracers for biomass burning. In this study, a fast water-based method was developed for the routine analysis of MAs, based on high-performance anion-exchange chromatography with electrospray ionization mass spectrometry detection. This method combines simple sample preparation, fast separation, and the advantages of the selective detection with MS. Analysis run was optimized to the maximum separation of levoglucosan, mannosan, and galactosan with 15-min analysis. The validation results indicated that the method showed good applicability for determination of MA isomer concentrations in ambient samples. The limit of detection was 100 pg for levoglucosan and 50 pg for mannosan and galactosan. Wide determination ranges enabled the analysis of samples of different concentration levels. The method showed good precision, both for standard solutions (3.9–5.9% RSD) and for fine particle samples (4.3–8.5% RSD). Co-elution of internal standard (carbon-13-labeled levoglucosan) and sugar alcohols with levoglucosan decreased the sensitivity of levoglucosan determination. The method was used to determine the MA concentrations in ambient fine particle samples from urban background (Helsinki) and rural background (Hyytiälä) in Finland. The average levoglucosan, mannosan, and galactosan concentrations were 77, 8.8, and 4.2 ng?m^?3 in Helsinki (winter 2008–2009) and 17, 2.3, and 1.4 ng?m^?3 in Hyytiälä (spring 2007), respectively. The interrelation of the three MA isomers was fairly constant in the ambient fine particle samples.     

Determination of saccharides in atmospheric aerosol using anion-exchange high-performance liquid chromatography and pulsed-amperometric detection

An improved method is described for the quantification of primary sugars, sugar alcohols and anhydrosugars in atmospheric aerosols, making use of separation by high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD). Quartz fibre filters from high-volume samplers were extracted with water and the extract injected directly. Repeatability is typically 4% RSD, for e.g. levoglucosan at 50 ng m(-3) in air, better for winter levels around 700 ng m(-3). Limits of detection for individual sugars are in the range 0.02-0.05 microg mL(-1) in solution, corresponding to 2-5 ng m(-3) from a 20 m(3) air sample. The overlap of arabitol and levogluocosan is overcome by using a Dionex PA-1 column, with appropriate control of eluent composition, and peak deconvolution software, allowing quantification of both sugars in difficult summer samples containing low-levels of levoglucosan. Analysis of a set of ambient aerosol samples by both GC-flame ionization detection and HPAEC-PAD shows good agreement. The new method has the advantage of requiring no sample pretreatment or derivatization and is thus well suited to handling large numbers of samples.     

Measurement of carbonaceous aerosols: validation of a thermal gravimetric method and its comparison with a thermal optical transmittance method

A high throughput thermal gravimetric method was developed to measure the carbonaceous aerosols and particulates collected on filters. Representative portions or the whole piece of a loaded or blank filter was sampled and conditioned at 105±5 °C for 4 h to drive away water moisture. The sample was then treated at 550±10 °C for 4 h. After each of the heat treatment steps, the sample was conditioned in a humidity and temperature-controlled cabinet for 12 h till constant weight. The weight of the filter before and after the heated treatment was measured and the weight difference between the treatment at 550 and 105 °C was calculated as the weight of the carbon containing substances (CCS). Reference chemical standards and certified reference materials SRM 1649a and 1650a were used to validate the method. CCS concentrations of real aerosol samples collected in the city of Hong Kong during the summer of 2001 were also measured, compared and correlated with the concentrations of total carbon (TC), elemental carbon (EC) and organic carbon (OC) of the samples determined using a thermal optical transmittance (TOT) method as specified in NIOSH method 5040. The weight of organic compounds in airborne particulate matters is usually estimated by multiplying the weight of TC, which is determined by thermal/thermal optical methods, by a factor of 1.2 or 1.4. To this end, a correction factor of approximately 1.6 was found to relate TC to the measured values of CCS in aerosol samples collected in the urban atmosphere of Hong Kong. The proposed procedure for measurement of CCS is simple, easy to follow and requires simple laboratory instrumentation. Typically, the analysis of more than 100 filter samples can be completed within three working days with minimal attention.     

Identification of secondary organic aerosols based on aerosol mass spectrometry

Secondary organic aerosol (SOA) is one of the major components of aerosols in the atmosphere and has not been well understood so far. Due to the complex chemical composition of organic aerosols, the identification of SOA has been a hotspot and difficult issue in the field of aerosol study. This study attempts to quantitatively identify SOA in winter of Shenzhen based on positive matrix factorization (PMF) analysis. Major sources were resolved and SOA was identified subsequently according to the characteristic ion fragments measured by highly time-resolved aerosol mass spectrometer measurement. It showed that in the winter of Shenzhen the average SOA concentration was 9.41 ± 6.33 μg/m³, accounting for 39.9 ± 21.8% of the total organic mass. Compared with primary organic aerosol (POA), the SOA concentrations had no large variation, suggestive of characteristics of regional secondary pollutants. The ratio of SOA/BC had pronounced diurnal variation, similar to that of O _x (O₃+NO₂), indicating SOA formation was significantly controlled by activity of photochemistry in the atmosphere. The most effective period for SOA formation was from 9 am ～3 pm since the SOA/BC ratio increased by 122% during this period. This study provides a new technical method and a new idea for SOA investigation.     

Characterization of novel di- and tricarboxylic acids in fine tropical aerosols

Three unknown di- and tricarboxylic acids were characterized in the fine size fraction of aerosols which were collected during the wet season in the Amazon basin (Rondonia, Brazil). For the structural characterization of the methyl esters of these unknown compounds, mass spectrometry with electron ionization (EI) and tandem mass spectral techniques combined with gas chromatographic (GC) separation were employed. Fragment and parent ion spectra were recorded during elution of the GC peaks by linked scanning of the B and E sectors in combination with high-energy collision-induced dissociation. The fragmentation patterns of significant ions in the first-order EI spectra were also obtained for nonanedioic acid, which was examined as a model compound. The compounds were tentatively identified as 4-acetyloxyheptanedioic acid and cis and trans isomers of 5-hexene-1,1,6-tricarboxylic acid. Since there were indications of biomass burning during the aerosol sampling the di- and tricarboxylic acids characterized in the present work could be markers for biomass burning. Furthermore, the characterization of di- and tricarboxylic acids in the fine size fraction of atmospheric aerosols may be important for assessing the effects of organic aerosols in cloud formation.     

Analysis of anions in ambient aerosols by microchip capillary electrophoresis

We describe a microchip capillary electrophoresis method for the analysis of nitrate and sulfate in ambient aerosols. Investigating the chemical composition of ambient aerosol particles is essential for understanding their sources and effects. Significant progress has been made towards developing mass spectrometry-based instrumentation for rapid qualitative analysis of aerosols. Alternative methods for rapid quantification of selected high abundance compounds are needed to augment the capacity for widespread routine analysis. Such methods could provide much higher temporal and spatial resolution than can be achieved currently. Inorganic anions comprise a large percentage of particulate mass, with nitrate and sulfate among the most abundant species. While ion chromatography has proven very useful for analyzing extracts of time-integrated ambient aerosol samples collected on filters and for semi-continuous, on-line particle composition measurements, there is a growing need for development of new compact, inexpensive approaches to routine on-line aerosol ion analysis for deployment in spatially dense, atmospheric measurement networks. Microchip capillary electrophoresis provides the necessary speed and portability to address this need. In this report, on-column contact conductivity detection is used with hydrodynamic injection to create a simple microchip instrument for analysis of nitrate and sulfate. On-column contact conductivity detection was achieved using a Pd decoupler placed upstream from the working electrodes. Microchips containing two Au or Pd working electrodes showed a good linear range (5-500 microM) and low limits-of-detection for sulfate and nitrate, with Au providing the lowest detection limits (1 microM) for both ions. The completed microchip system was used to analyze ambient aerosol filter samples. Nitrate and sulfate concentrations measured by the microchip matched the concentrations measured by ion chromatography.     

Local and non-local sources of airborne particulate pollution at Beijing--The ratio of Mg/Al as an element tracer for estimating the contributions of mineral aerosols from outside Beijing

A new element tracer technique has firstly been established to estimate the contributions of mineral aerosols from both inside and outside Beijing. The ratio of Mg/Al in aerosol is a feasible element tracer to distinguish between the sources of inside and outside Beijing. Mineral aerosol, inorganic pollution aerosol mainly as sulfate and nitrate, and organic aerosol are the major components of airborne particulates in Beijing, of which mineral aerosol accounted for 32%―67% of total suspended particles (TSP), 10%―70% of fine particles (PM2.5), and as high as 74% and 90% of TSP and PM2.5, respectively, in dust storm. The sources from outside Beijing contributed 62% (38%―86%) of the total mineral aerosols in TSP, 69% (52%―90%) in PM10, and 76% (59%―93%) in PM2.5 in spring, and 69% (52%―83%), 79% (52%―93%), and 45% (7%―79%) in TSP, PM10, and PM2.5, respectively, in winter, while only ～20% in summer and autumn. The sources from outside Beijing contributed as high as 97% during dust storm and were the dominant source of airborne particulates in Beijing. The contributions from outside Beijing in spring and winter are higher than those in summer, indicating clearly that it was related to the various meteorological factors.     

Measurement of carbonaceous aerosols: validation and comparison of a solvent extraction-gas chromatographic method and a thermal optical transmittance method

A solvent extraction-gas chromatographic method was developed for the measurement of four classes of solvent-extractable organic compounds (SEOC), viz., aliphatic hydrocarbons, polynuclear aromatic hydrocarbons, fatty acids and alkanols, in ambient carbonaceous aerosols. The selectivity and recovery of the method using different solvents commonly used in the analysis of SEOC was evaluated. The composition of SEOC in aerosol and urban dust samples was found to vary with the choice of solvent. Such variation was not observed in filters spiked with standards of SEOC. The developed method was validated by the analysis of reference urban dust SRM 1649a from the National Institute of Standards and Technology. The concentrations of selected polynuclear aromatic hydrocarbons in the reference dust were found to fall within the certified and reference concentrations. The thermal characteristics of aerosol samples collected in an urban area of Hong Kong and the four classes of identified SEOC were also studied using a thermal optical transmittance (TOT) method as specified in NIOSH Method 5040. Correlations were made to compare the method-dependent SEOC content obtained by the solvent extraction method and the results for total carbon, organic carbon and elemental carbon obtained by the TOT method.     

Magnesium sulfate aerosols studied by FTIR spectroscopy: hygroscopic properties, supersaturated structures, and implications for seawater aerosols

Supersaturated MgSO4 aerosols and dilute MgSO4 solutions were studied by FTIR spectroscopic techniques (i.e., aerosol flow tube (AFT) and attenuated total reflection (ATR)). The hygroscopic properties of MgSO4 aerosols were investigated with results in good agreement with previous measurements by a scanning electrodynamic balance (SEDB). Well-defined spectral evolutions with changing relative humidity (RH) for the v3 band of SO4(2-) and the water O-H stretching envelope could be directly related to the observed hygroscopic properties of MgSO4 aerosols. When the RH decreased from approximately 55 to approximately 40%, the v1 band of SO4(2-) in supersaturated MgSO4 aerosols was observed to transform from a sharp peak at approximately 983 cm(-1) into a wide band at approximately 1005 cm(-1). The sharp peak at approximately 983 cm(-1) was mainly assigned to such associated complexes of Mg2+ and SO4(2-) as double solvent-separated ion pairs (2SIPs), solvent-shared ion pairs (SIPs), and simple contact ion pairs (CIPs) in supersaturated MgSO4 aerosols, while the wide band at approximately 1005 cm(-1) was due to polymeric CIPs chains, probably the main component of gels formed in MgSO4 aerosols at low RHs. Relating to this v1 band transformation, the peak position of the v(3) band was first shown to be a sensitive indicator of CIPs formation, spanning across approximately 40 cm(-1) on the formation of polymeric CIPs chains, which could also be supported by aerosol composition analysis in the form of water-to-solute molar ratios (WSR). In the water O-H stretching envelope, the absorbance intensities at 3371 and 3251 cm(-1) were selected to represent contributions from weak and strong hydrogen bonds, respectively. The absorbance intensity ratio changing with RH of 3371 to 3251 cm(-1) could be related to the previous observations with the v1 and v3 bands of SO4(2-). As a result, the formation of CIPs with various structures in large amounts was supposed to significantly weaken hydrogen bonds in supersaturated MgSO4 aerosols, while 2SIPs and SIPs were not expected to have similar effects even when occurring in abundance. In comparison with MgSO4 aerosols, the peak positions of the v3 band of SO4(2-) in artificial seawater aerosols implied that the MgSO4 component should be contained as gels or concentrated solutions in the fissures of microcrystals of sea salts for freshly formed seawater aerosols at low RHs.     

Rapid quantitative and qualitative confirmatory method for the determination of monofluoroacetic acid in foods by liquid chromatography-mass spectrometry

Many environmental samples contain complex mixtures of organic compounds with different sources, polarities and reactivities. This study reports a method for the analysis of both polar/water-soluble and apolar organic compounds in several kinds of environmental samples. The analytical method consists of extraction with a mixture of dichloromethane:methanol (2:1, v/v), silylation using BSTFA (N,O-bis-(trimethylsilyl)trifluoroacetamide) and analysis by gas chromatography-mass spectrometry (GC-MS), a common device in chemical and environmental laboratories. Fifty individual sugar standards, including monosaccharides, sugar alcohols, anhydrosugars, disaccharides and trisaccharides, were analyzed for the determination of their fragmentation patterns and retention times. Recoveries (at three concentrations) and limits of detection (LOD) were determined for a standard mixture containing glucose (monosaccharide), sorbitol (sugar alcohol), levoglucosan (anhydrosugar) and sucrose (disaccharide), and they varied from 68 to 119% and 130 to 360 ng mL(-1), respectively. The method was used for the analysis of aerosol particle, soil and sediment samples, and demonstrated its feasibility in detecting not only several important environmental sugars (e.g., glucose, fructose, inositol, mannitol, sorbitol, levoglucosan, sucrose, mycose), but also a large range of organic compound classes from other polar components (e.g., dicarboxylic acids) to apolar compounds such as n-alkanes. Therefore, the analytical method presented here demonstrated its usefulness for a better understanding of sources and transport of various organic compounds in different environmental compartments.     

Analysis of organic aerosols collected on filters by Aerosol Mass Spectrometry for source identification

Aerosol Mass Spectrometers (AMS) are powerful tools in the analysis of the chemical composition of airborne particles, particularly organic aerosols which are gaining increasing attention. However, the advantages of AMS in providing on-line data can be outweighed by the difficulties involved in its use in field measurements at multiple sites. In contrast to the on-line measurement by AMS, a method which involves sample collection on filters followed by subsequent analysis by AMS could significantly broaden the scope of AMS application. We report the application of such an approach to field studies at multiple sites. An AMS was deployed at 5 urban schools to determine the sources of the organic aerosols at the schools directly. PM₁ aerosols were also collected on filters at these and 20 other urban schools. The filters were extracted with water and the extract run through a nebulizer to generate the aerosols, which were analyzed by an AMS. The mass spectra from the samples collected on filters at the 5 schools were found to have excellent correlations with those obtained directly by AMS, with r² ranging from 0.89 to 0.98. Filter recoveries varied between the schools from 40 to 115%, possibly indicating that this method provides qualitative rather than quantitative information. The stability of the organic aerosols on Teflon filters was demonstrated by analysing samples stored for up to two years. Application of the procedure to the remaining 20 schools showed that secondary organic aerosols were the main source of aerosols at the majority of the schools. Overall, this procedure provides accurate representation of the mass spectra of ambient organic aerosols and could facilitate rapid data acquisition at multiple sites where AMS could not be deployed for logistical reasons.     

Speciation of arsenic in coarse and fine urban aerosols using sequential extraction combined with liquid chromatography and atomic fluorescence detection

An analytical procedure for speciation of As in urban aerosol samples was developed. The aerosols were collected by sequential filtration through membrane filters. Part of each filter was investigated by INAA for the total amount of As. Another part of the filters was treated by a sequential extraction procedure to differentiate between water-extractable, phosphate-extractable and refractory chemical forms. Water-extractable forms were further differentiated into anionic As species by HPLC-HGAFS. Extractability of As into water exhibited a clear dependency on the aerosol size fraction (12% in coarse fraction and 50% in fine fraction). Dependency of the phosphate extractable As on the aerosol size fraction seems not to be significant (10–15% in both size fractions). The remaining amount, i.e., about 78% of the coarse As and about 40% of the fine As was considered to be refractory or environmentally immobile As. Water-extractable As forms could only be attributed to arsenate.     

Evaluation of airborne particles at the Alhambra monument in Granada, Spain

As a part of an ongoing investigation regarding the air quality at the Alhambra monument (UNESCO World Cultural Heritage), indoor and outdoor atmospheric aerosols (PM₁ and PM_10-1) and pollutant gases (O₃, NO₂, SO₂ and NH₃) were studied during summer and winter. Bulk elements, ionic compounds and black carbon (BC) in aerosols were analyzed with X-ray fluorescence spectrometry, ion chromatography and aethalometry/reflectometry, respectively. Natural PM_10-1 aerosols, such as carbonate-rich soil and sea salts, reacted with a typical urban atmosphere, producing a mixture of particulates with diverse chemical composition. The content/formation of secondary inorganic aerosols depended on the air temperature and absolute humidity. Ratios of typical mineral elements (i.e., Ti/Fe and Si/Fe) showed that Saharan dust events contribute to the composition of the observed mineral aerosol content. BC, V and Ni originated from diesel exhaust, while Cu, Cr, Pb and Zn came mainly from non-exhaust vehicular emissions. Weathering phenomena, such as blackening and pigment discoloration, which could arise from gradual aerosol deposition indoors, are discussed.     

Speciation of arsenic in coarse and fine urban aerosols using sequential extraction combined with liquid chromatography and atomic fluorescence detection

An analytical procedure for speciation of As in urban aerosol samples was developed. The aerosols were collected by sequential filtration through membrane filters. Part of each filter was investigated by INAA for the total amount of As. Another part of the filters was treated by a sequential extraction procedure to differentiate between water-extractable, phosphate-extractable and refractory chemical forms. Water-extractable forms were further differentiated into anionic As species by HPLC-HGAFS. Extractability of As into water exhibited a clear dependency on the aerosol size fraction (12% in coarse fraction and 50% in fine fraction). Dependency of the phosphate extractable As on the aerosol size fraction seems not to be significant (10-15% in both size fractions). The remaining amount, i.e., about 78% of the coarse As and about 40% of the fine As was considered to be refractory or environmentally immobile As. Water-extractable As forms could only be attributed to arsenate.