AEOT反胶束中脂肪酶的催化活性

反胶束已广泛应用于膜模拟化学和蛋白质的液 液萃取中[1～ 3] ,反胶束酶反应作为实现有机相酶催化的方法之一 ,具有许多独特的优点 ,反胶束独特的结构特征使表面活性剂分子组成的膜将油水相隔开 ,从而有利于保持酶的活性和稳定性。酶在反胶束的微水环境中比在水溶液中更接近天然的细胞内环境 ,在这里酶和底物分子均可得到有效的分散 ,接触几率大大提高 ,因而催化效率也得到很大提高。反胶束可以适用于各种类型的 (亲水的、疏水的和双亲的 )底物[4] ,已逐步形成“胶束酶学”的研究分支 ,研究胶束酶学的Martinek等[3] 曾预言 :反胶束体系有可…     

直链醇对反胶束体系中木素过氧化物酶催化活性的影响

根据研究发现, 在有醇作助表面活性剂的CTAB反胶束中木素过氧化物酶(LiP)不能表现活力, 而在水介质中CTAB对LiP的催化活性影响又不是很大. 为了揭示其中醇的影响, 本工作就不同碳链长度的醇对LiP酶催化性能的影响进行了研究. 由于CTAB反胶束体系中醇浓度较高, 且碳原子数大于4的直链醇在水中的溶解度又很小, 为此采用了LiP可在其中显示催化活性的CTAB正胶束、AOT反胶束和Brij30反胶束作介质, 通过研究这些介质中不同链长的醇对LiP催化活力的影响, 来探讨CTAB反胶束中木素过氧化物酶(LiP)不能表现活力的原因. 结果表明, 不管表面活性剂聚集体的结构、电性质及反胶束大小如何, 只要醇的浓度超过500 mmol•L^－1 (丁醇≥1200 mmol•L^－1), LiP在上述原本可显示活力的介质中均无催化活性. 据此推测CTAB反胶束中木素过氧化物酶(LiP)不能表现活力的原因主要是由助表面活性剂醇造成的.     

新型阴离子表面活性剂的合成及其反胶束体系的酶催化性能

合成了未见文献报道的新型阴离子表面活性剂磷酸二[(2-乙基己氧基)乙基]酯钠(sodium di-[(2-ethylhexyloxy)ethyl] phosphate,DEEPA);以核磁共振氢谱和红外光谱表征了它的结构;在DEEPK/异辛烷反胶束体系中进行了脂肪酶催化橄榄油水解反应实验.结果表明,该反胶束体系的催化活性优于AOT反胶束体系,更优于油-水双相中的酶催化反应,最大活性是油-水双相体系的1.86倍.     

Gas Hydrate Formation in Reversed Micelles

We describe a technique to modify protein solubility and optimize enzyme activity in reversed micellar solutions. The technique is based on the ability of hydrates of natural gas to form in the micro-aqueous phase. Clathrate hydrates are crystalline inclusions of water and gas, and their formation in bulk water has traditionally been studied with relevance to natural gas recovery. We have found that hydrates can form in the environment of the microaqueous pools of reversed micelles, and that their extent of formation can be well controlled through the thermodynamic variables of temperature and pressure. Additionally, formation of hydrates affects the size and aggregation number of the micelles, and thus influences the solubility and conformation of encapsulated proteins. We demonstrate how the concept can be used in two applications: (i) protein extraction into reversed micelles and subsequent recovery, and (ii) optimization of enzyme activity in reversed micelles.     

聚苯胺纳米粒子的反胶束法合成及自组装

聚苯胺纳米粒子的反胶束法合成及自组装;聚苯胺;纳米粒子;反胶束;自组装     

醇脱氢酶在反胶束溶液中的酶学性质研究

以十六烷基三甲基溴化铵(CATB)-辛烷-戊醇反胶束体系对醇脱氢酶(ADH)进行固定化,考察了pH、含水量、表面活性剂和助溶剂浓度对ADH固定化的影响。对游离酶和固定化酶的催化动力学性质研究表明:酶促反应的最适pH值均为9.0,最适温度分别是28℃和20℃,对乙醇的米氏常数分别为8.8mmol/L和5.5mmol/L。25℃时,游离酶存放120min约失活90%,而固定化酶仅失活30%,表明反胶束固定化ADH具有较好的热稳定性。     

醇脱氢酶在反胶束溶液中的催化动力学性质

以十六烷基三甲基溴化铵(CATB)-辛烷-己醇反胶束体系对醇脱氢酶(ADH)进行固定化,试验了含水量、酶液pH值、CTAB和己醇浓度对ADH固定化的影响。对游离酶和固定化酶的催化动力学性质研究表明：酶促反应的最适pH值分别为8.2和8.8,最适温度分别是31℃和20℃,对乙醇的米氏常数Km分别为12mmol/L和7.4mmol/L。在30℃时,游离酶存放150min后失活90%,固定化酶失活50%,表明反胶束固定化ADH有较好的热稳定性。     

反胶束笼对纳米氯化银反应性能的微环境限定

研究了反胶束中直径为10～17nm的AgCl微粒与亚甲基蓝之间的作用，比较了阴离子型和非离子型表面活性剂组成的反胶束微环境的影响，讨论了亚甲基蓝在粒子上的吸附，二聚体形成和纳米AgCl粒子对亚甲基蓝荧光猝灭机制．     

反胶束笼对纳米氯化银反应性能的微环境限定

研究了反映束中直径为１０￣１７ｎｍ的ＡｇＣｌ微料与亚甲基蓝之间的作用，比较了阴离子型和非离子型表面活性剂组成的反胶束微环境的影响，讨论了亚甲基蓝在粒子上的吸附，二聚体形成的钠米ＡｇＣｌ粒子对亚甲基蓝荧光猝灭机制。     

反胶束固定化醇脱氢酶的制备及应用研究

研究十六烷基三甲基溴化铵(CTAB)-辛烷-己醇反胶束体系固定化醇脱氢酶(ADH)的制备及应用。考察了含水量、CTAB和己醇用量对于ADH固定化的影响。对游离酶和固定化酶的催化动力学性质研究表明:酶促反应的最适pH值分别为8.2和8.8,最适温度分别为31℃和20℃,米氏常数分别为12mmol/L和7mmol/L。30℃时,游离酶存放150min后失活90%,固定化酶失活50%,表明反胶束固定化ADH有较好的热稳定性。应用此体系测定了试样中乙醇的含量。     

反胶束法制备纳米Ni(OH)2

纳米粒子;纳米线;反胶束法制备纳米Ni(OH)2     

反胶束萃取-高效液相色谱法测定磺酸型偶氮染料

建立了水中磺酸偶氮染料甲基橙（MO）、刚果红（CR）和酸性铬兰K（ACBK）的反胶束萃取-离子对高效液相色谱定量检测的方法。采用Hypersil C18柱（250×4．6mm,5μm）,流动相为V（甲醇）／V（水）=63：37（含10mmol／L的KH2PO4、4mmol／L的四丁基溴化铵,KOH调pH=7．0）,流速为0.8mL／min,MO、CR和ACBK检测波长分别为449nm、505nm和526nm。结果表明,染料的回收率为92．9％～102．1％,相对标准偏差为0．9％～2．3％,水中MO、CR和ACBK的检出限分别为0．6μg／L、1．2μg／L和1．3μg／L。     

不同表面活性剂反胶束对纳米AgCl性能的影响

在反胶束中研究了直径10～14nm的AgCl微粒子与曙红间的作用,比较了阴离子型和非离子型表面活性剂组成的反胶束微环境效应.考察了AgCl粒子对曙红吸收光谱、荧光光谱及荧光寿命的影响.讨论了AgCl粒子对曙红荧光猝灭的机制,初步研究了稳定剂苯基巯基四氮唑及四氮茚对曙红-AgCl粒子反胶束体系的影响.     

反胶束固定化乳酸脱氢酶的催化动力学性质研究

以十六烷基三甲基溴化铵(CATB)-辛烷-己醇反胶束体系对乳酸脱氢酶(LDH)进行固定化,试验了含水量、CTAB和己醇浓度对LDH固定化的影响。对游离酶和固定化酶的催化动力学性质研究表明:酶促反应的最适pH值分别为9.2和9.5,最适温度分别是37℃和43℃,对乳酸的米氏常数Km分别为1.4 mmol/L和2.3mmol/L。30℃时,游离酶存放2 h,约失活50%,而固定化酶仅失活10%,表明反胶束固定化LDH具有较好的热稳定性。     

Formation and Characterization of Reversed Micelles Composed of Phospholipids and Fatty Acids

The formation of reversed micellar systems composed of phosphatidylcholine (PC) and fatty acid was newly demonstrated by a significant increase in water content in the organic ethyl oleate phase when the micelles were prepared by the contact method. The solubilized water concentration in the reversed micellar organic phase reached 3 wt%. The new systems are expected to be used as highly biocompatible reversed micellar systems. The structure of the reversed micelles composed of PC and oleic acid was characterized by determining the water concentration and by small-angle X-ray scattering analysis. The reversed micelles composed of PC and oleic acid formed in ethyl oleate were spherical. The radius of gyration was between 30 and 50 Å. The size of the reversed micelles decreased with an increase in the oleic acid concentration and was independent of the PC concentration. Experimental results indicated that the structure of the reversed micellar system was determined by the oleic acid concentration. An increase in the PC concentration caused an increase in the number of reversed micelles of the same size. These reversed micellar systems are expected to be used as solubilization media in pharmaceutical and food industries because they are not toxic.     

Ionic Strength Effects of Electrolytes on Solubilized States of Water in AOT Reversed Micelles

The limiting amounts of solubilized aqueous NaCl, NaNO(3), MgCl(2), and AlCl(3) in sodium 1,2-bis-(2-ethylhexyloxycarbonyl)-1-ethanesulfonate (aerosol OT)/isooctane solutions have been measured as a function of the ionic strength of the electrolytes. In any system, the limiting amounts increased up to the optimal ionic strength (Io(opt)), and afterward, as ionic strength increased, they decreased and were followed by a constant. These increased and decreased curves of water solubilization below and above Io(opt), called, respectively, salting-in and salting-out curves, could be interpreted, respectively, from the counteracting effects of attractive intermicellar interaction and interfacial bending stress. The effects of electrolytes on the solubilized states of water by micelles were examined using NMR and near-infrared spectroscopic techniques. Consequently, two types of waters, i.e., water bound directly to the ionic head groups of the surfactant in reversed micelles and water interacting with the hydrated head groups in swollen micelles through hydrogen bonds, were almost unaffected by any electrolytes, whereas much greater effects were observed for bulklike water in W/O microemulsions. The order of the degree of lowering of salting-out curves in W/O microemulsion regions in each system was found to agree with the Hofmeister series. Copyright 2001 Academic Press.     

β-CD衍生物的反胶束微型反应器模拟酶催化氧化研究

利用我们设计的反胶束微型反应器，对两种β-环糊精（β-Cyclodextrin,简写β-CD）衍生物，在不同溶剂中催化苯甲醇氧化成苯甲醛和苯甲酸的反应动力学进行了研究，结果表明，该反应器的催化效率均相催化反应高，反应的后处理较简单，且较少污染物产生。     

Determination of AOT by Adsorptive Stripping Tensammetry in Connection to the Biopolimers Extractin by Reversed Micelles

Abstract

Bis(2ethylexyl) sodium sulfosuccinate (AOT) can be determined using Adsorptive Stripping Differential Pulse Tensammetry (ASDP) in concentration range 5 10^?7 ? 5 10^?6 M. Higher concentrations can be determined by direct Differential Pulse Polarography.

The method is fit for determining AOT in reversed micelles and in water, a problem that is closely bound to the use of water-in-oil microemulsions for the selective extraction of biopolimers and their recovery in biotechnology.     

新型磷酸酯表面活性剂的合成、表征及其反胶束体系对蛋白质的提取

合成了适于反胶束法提取蛋白质的磷酸酯表面活性剂━━二油酸乙二醇单酯基磷酸酯钠(DEOPA);以氢核磁共振谱和红外光谱表征了其结构;测定了其临界胶束浓度(cmc)、亲水亲油平衡值(HLB值)及对水的增溶作用等表面化学性质;考察了DEOPA/异辛烷反胶束体系提取蛋白质的性能.结果表明,DEOPA具有较高的表面活性,适合于构建反胶束体系,并可用于提取大分子量的蛋白质.