DEUSS: a perdeuterated poly(oxyethylene)-based resin for improving HRMAS NMR studies of solid-supported molecules

A novel resin called DEUSS (perdeuterated poly(oxyethylene)-based solid support) has been prepared by anionic polymerization of deuterated [D4]ethylene oxide, followed by cross-linking with deuterated epichlorohydrin. DEUSS can be suspended in a wide range of solvents including organic and aqueous solutions, in which it displays a high swelling capacity. As measured by proton HRMAS of the swollen polymer, the signal intensity of the oxyethylene protons is reduced by a factor of 110 relative to the corresponding nondeuterated poly(oxyethylene)poly(oxypropylene) (POEPOP) resin, thus facilitating detailed HRMAS NMR studies of covalently linked molecules. This 1H NMR invisible matrix was used for the solid-phase synthesis of peptides, oligoureas, and a series of amides as well as their characterization by HRMAS NMR spectroscopy. On-bead NMR spectra of high quality and with resolution comparable to that of liquid samples were obtained and readily interpreted. The complete absence of the parasite resin signals will be of great advantage, for example, for the optimization of multistep solid-phase stereoselective reactions, and for the conformational study of resin-bound molecules in a large variety of solvents.     

Evidence of secondary structure by high-resolution magic angle spinning NMR spectroscopy of a bioactive peptide bound to different solid supports.

The structure of the 19-amino acid peptide epitope, corresponding to the 141-159 sequence of capsid viral protein VP1 of foot-and-mouth disease virus (FMDV), bound to three different resins, namely, polystyrene-MBHA, PEGA, and POEPOP, has been determined by high-resolution magic angle spinning (HRMAS) NMR spectroscopy. A combination of homonuclear and heteronuclear bidimensional experiments was used for the complete peptide resonance assignment and the qualitative characterization of the peptide folding. The influence of the chemicophysical nature of the different polymers on the secondary structure of the covalently attached FMDV peptide was studied in detail. In the case of polystyrene-MBHA and polyacrylamide-PEGA resins, the analysis of the 2D spectra was hampered by missing signals and extensive overlaps, and only a propensity toward a peptide secondary structure could be derived from the assigned NOE correlations. When the FMDV peptide was linked to the polyoxyethylene-based POEPOP resin, it was found to adopt in dimethylformamide a helical conformation encompassing the C-terminal domain from residues 152 to 159. This conformation is very close to that of the free peptide previously analyzed in 2,2,2-trifluoroethanol. Our study clearly demonstrates that a regular helical structure can be adopted by a resin-bound bioactive peptide. Moreover, a change in the folding was observed when the same peptide-POEPOP conjugate was swollen in aqueous solution, displaying the same conformational features as the free peptide in water. The possibility of studying solid-supported ordered secondary structures by the HRMAS NMR technique in a wide range of solvents can be extended either to other biologically relevant peptides and proteins or to new synthetic oligomers.     

Conformational analysis by HRMAS NMR spectroscopy of resin-bound homo-peptides from C(alpha)-methyl-leucine

A series of [L-(alphaMe)Leu]n (n = 1-5) homo-peptides have been covalently linked to Tentagel and POEPOP resins and submitted to a conformational study using HRMAS NMR spectroscopy. Whereas the mono- and dipeptide are mainly fully-extended, stable 3(10)-helical structures are formed beginning from the trimer.     

High resolution magic angle spinning NMR in combinatorial chemistry

Solid phase organic chemistry coupled with combinatorial methods promises to increase dramatically the diversity and number of small molecules available for medical and biological applications. However, optimizing the reaction conditions can be a time consuming step, especially since analytical tools to monitor reaction progress and detect impurities for solid phase chemistry are less developed than for solution chemistry. The use of high resolution magic angle spinning (HRMAS) NMR is described here as such an analytical tool. Whereas initial applications of molecular identification using deuterated organic solvents to swell the resins presented a significant gain in time over the cleave-and-analysis methods, the introduction of a differential diffusion filter has made immediate recording of spectra possible without any sample treatment. The applications of HRMAS NMR to different solid supports that are used in combinatorial chemistry will be described in terms of rapidity, robustness and sensitivity.     

固相合成及组合化学用的高聚物载体

综述了用于固相合成及组合化学的高聚物载体的制备方法、特征、应用和最新进展,重点介绍了目前广泛用作固相载体的交联聚苯乙烯树脂、聚酰胺树脂和TentaGel树脂,并对几类新型载体如聚乙二醇、聚四氢呋喃衍生物交联剂改性的聚苯乙烯树脂、非芳环体系的POEPOP,树脂和SPOCC树脂作了简要的概述。     

Resolving the structure of ligands bound to the surface of superparamagnetic iron oxide nanoparticles by high-resolution magic-angle spinning NMR spectroscopy

A major challenge in magnetic nanoparticle synthesis and (bio)functionalization concerns the precise characterization of the nanoparticle surface ligands. We report the first analytical NMR investigation of organic ligands stably anchored on the surface of superparamagnetic nanoparticles (MNPs) through the development of a new experimental application of high-resolution magic-angle spinning (HRMAS). The conceptual advance here is that the HRMAS technique, already being used for MAS NMR analysis of gels and semisolid matrixes, enables the fine-structure-resolved characterization of even complex organic molecules bound to paramagnetic nanocrystals, such as nanosized iron oxides, by strongly decreasing the effects of paramagnetic disturbances. This method led to detail-rich, well-resolved (1)H NMR spectra, often with highly structured first-order couplings, essential in the interpretation of the data. This HRMAS application was first evaluated and optimized using simple ligands widely used as surfactants in MNP synthesis and conjugation. Next, the methodology was assessed through the structure determination of complex molecular architectures, such as those involved in MNP3 and MNP4. The comparison with conventional probes evidences that HRMAS makes it possible to work with considerably higher concentrations, thus avoiding the loss of structural information. Consistent 2D homonuclear (1)H- (1)H and (1)H- (13)C heteronuclear single-quantum coherence correlation spectra were also obtained, providing reliable elements on proton signal assignments and carbon characterization and opening the way to (13)C NMR determination. Notably, combining the experimental evidence from HRMAS (1)H NMR and diffusion-ordered spectroscopy performed on the hybrid nanoparticle dispersion confirmed that the ligands were tightly bound to the particle surface when they were dispersed in a ligand-free solvent, while they rapidly exchanged when an excess of free ligand was present in solution. In addition to HRMAS NMR, matrix-assisted laser desorption ionization time-of-flight MS analysis of modified MNPs proved very valuable in ligand mass identification, thus giving a sound support to NMR characterization achievements.     

High-resolution magic-angle spinning NMR for the identification of reaction products directly from thin-layer chromatography spots

We have investigated the prospect of identifying organic reaction products directly from separated thin-layer chromatography (TLC) spots with high-resolution magic-angle spinning (HRMAS) NMR. The concept is to use the TLC spots for NMR analysis so that spectra can be obtained before the reaction is worked up, but without having to elute the product from the TLC stationary phase. Thus, the separated spot is scraped from the plate, transferred to an HRMAS sample rotor, and suspended with a deuterated solvent. Herein, we describe the effects of having the stationary phase present during NMR acquisition. Using a Varian 4 mm gHX Nanoprobe and rotenone as a test compound, we found that the presence of the stationary phase during NMR acquisition resulted in (i) a large, broad 'background' signal near 4.6 ppm and (ii) a decrease in the signal-to-noise ratio due to the adsorption of the product molecules to the adsorbent. However, both effects could be adequately and conveniently eliminated. The background signal was removed by using either a CPMG pulse sequence or chemical exchange. The adsorption was avoided by using a more polar solvent system. Finally, we found that spectra with good signal-to-noise ratio and resolution could be acquired in a matter of minutes even for cases of limited product concentration. Therefore, we believe the technique has value and provides the organic chemist with another option to obtain NMR data critical for structural elucidation or verification.     

Dynamic and magnetic susceptibility effects on the MAS NMR linewidth of a tetrapeptide bound to different resins

Under magic angle spinning, the NMR spectrum of the tetrapeptide Ala‐Ile‐Gly‐Met bound to a Wang resin, and swollen in DMF, exhibits proton and carbon linewidths that are sharp enough to allow the complete characterization of the peptide using classical liquid‐state NMR methods. The proton linewidths of the bound peptide remain, however, about three times larger than those of the free peptide in solution. The residual NMR linewidth originates essentially from incompletely averaged magnetic susceptibility effects due to the Wang resin. Replacing the aromatic Wang resin with a PEGA or POEPOP resin removes this effect. To investigate the contribution to line broadening of the peptide dynamics, relaxation studies were performed on the peptide bound to Wang and POEPOP resins. Copyright © 2001 John Wiley & Sons, Ltd.     

Development of an easy-to-use mass spectrometric technique to monitor solid-phase reactions on polystyrene supports

By using mass spectrometry as an analytical tool to characterise substituted, cross-linked polystyrene resins, it is possible to directly monitor the progress of the solid-phase reactions performed on these resins without prior cleavage of the resin-bound molecules. Therefore, this is a true on-resin analytical method. The mass-to-charge ratios observed in the mass spectra are readily assigned to fragments of the polymer that include the chemically bound substituents. This is the first time that the formation and breaking of bonds have been directly observed on the polymeric support. Furthermore, the relative intensities of the signals in the mass spectra provide a measure of the completeness of the reaction. Because these measurements are rapidly performed without further chemical transformations or cleavage procedures, and because only minimal amounts of material are needed, this technique could become the solid-phase equivalent of thin-layer chromatography used in classical liquid-phase chemistry.     

Physical properties of poly(ethylene glycol) (PEG)-based resins for combinatorial solid phase organic chemistry: a comparison of PEG-cross-linked and PEG-grafted resins

Three series of poly(ethylene glycol) (PEG)-based polymers were synthesized and characterized with respect to their physical properties. Polyoxyethylene-polyoxypropylene (POEPOP), polyoxyethylene-polyoxetane (SPOCC), and polyoxyethylene-polystyrene (POEPS-3) were synthesized respectively by anion polymerization, cation polymerization, and radical polymerization. Both bulk and suspension modes were used to synthesize the polymers from derivatized PEG monomers (PEG 400, PEG 900, and PEG 1500). The three supports were compared with two commercially available PEG-grafted supports (TentaGel S OH, ArgoGel-OH) and two polystyrene supports (aminomethylated polystyrene [PS-NH2] and macroporous aminomethylated polystyrene [PLAMS]) with respect to their swelling properties, loading, NMR spectral quality, as well as solvent and reagent accessibility. Loadings of 0.3-0.7 mmol/g were obtained for the PEG-based resins. Swelling of the PEG-based resins was determined to be higher than that of the PEG-grafted resins and polystyrene supports. The PEG-based resins gave better resolved high-resolution NMR spectra than the PEG-grafted resins when examined by magic angle spinning nanoprobe (MAS) NMR spectroscopy. Moreover, fluorescence quenching of polymer bound 2-amino-benzoate by protonation with p-toluenesulfonic acid showed moderate to fast diffusion through the polymer depending on the solvent and the polymer matrix.     

Modern separation techniques for the efficient workup in organic synthesis

The shift of paradigm in combinatorial chemistry, from large compound libraries (of mixtures) on a small scale towards defined compound libraries where each compound is prepared in an individual well, has stimulated the search for alternative separation approaches. The key to a rapid and efficient synthesis is not only the parallel arrangement of reactions, but simple work-up procedures so as to circumvent time-consuming and laborious purification steps. During the initial development stages of combinatorial synthesis it was believed that rational synthesis of individual compounds could only be achieved by solid-phase strategies. However, there are a number of problems in solid-phase chemistry: most notably there is the need for a suitable linker unit, the limitation of the reaction conditions to certain solvents and reagents, and the heterogeneous reaction conditions. Further disadvantages are: the moderate loading capacities of the polymeric support and the limited stability of the solid support. In the last few years several new separation techniques have been developed. Depending on the chemical problem or the class of compounds to be prepared, one can choose from a whole array of different approaches. Most of these modern separation approaches rely on solution-phase chemistry, even though some of them use solid-phase resins as tools (for example, as scavengers). Several of these separation techniques are based on liquid-liquid phase separation, including ionic liquids, fluorous phases, and supercritical solvents. Besides being benign with respect to their environmental aspects, they also show a number of advantages with respect to the work-up procedures of organic reactions as well as simplicity in the isolation of products. Another set of separation strategies involves polymeric supports (for example, as scavengers or for cyclative cleavage), either as solid phases or as soluble polymeric supports. In contrast to solid-phase resins, soluble polymeric supports allow reactions to be performed under homogeneous conditions, which can be an important factor in catalysis. At the same time, a whole set of techniques has been developed for the separation of these soluble polymeric supports from small target molecules. Finally, miscellaneous separation techniques, such as phase-switchable tags for precipitation by chemical modification or magnetic beads, can accelerate the separation of compounds in a parallel format.     

1H‐HRMAS NMR study of smoked Atlantic salmon (Salmo salar)

High‐resolution magic angle spinning (HRMAS) NMR spectroscopic data of smoked Atlantic salmon (Salmo salar) were fully assigned by combination of one‐ and two‐dimensional‐HRMAS experiments. Complete representative spectra, obtained after few minutes of analysis time, revealed a large number of minor and major compounds in the sample. The methodology is limited by the low sensitivity of NMR, and therefore HRMAS only enables the determination of the most relevant components. These were fatty acids (FAs), carbohydrates, nucleoside derivatives, osmolytes, amino acids, dipeptides and organic acids. For the first time, spectra were resolved sufficiently to allow semiquantitative determination in intact muscle of the highly polyunsaturated FA 22:6 ω‐3. Additionally, the feasibility of ¹H‐HRMAS NMR metabolite profiling was tested to identify some bioactive compounds during storage. This profiling was carried out by the non‐destructive and direct analysis (i.e. without requiring sample preparation and multiple step procedures) of intact salmon muscle. The proposed procedure can be applied to a large number of samples with high throughput due to the short time of analysis and quick evaluation of the data. Copyright © 2010 John Wiley & Sons, Ltd.     

Inverse H-C ex situ HRMAS NMR experiments for solid-phase peptide synthesis

The growing importance of solid-phase peptide synthesis (SPPS) has necessitated the development of spectroscopic experiments that can be used to obtain structural and conformational information on resin-bound peptides. Despite the utility of two-dimensional high-resolution magic angle spinning (HRMAS) NMR experiments that provide homonuclear shift correlations, experiments that provide heteronuclear shift correlations are necessary for complex conformational and structural elucidatory problems. Here we report the optimization and implementation of non-gradient inverse NMR experiments for acquiring the 1H-13C shift correlations of resin-bound peptides. The use of non-gradient experiments is advantageous as many magic angle spinning (MAS) probes do not possess gradient coils. An HRMAS BIRD-HMQC experiment with a reduced 1JCH constant has proven very suitable for obtaining one-bond correlations. Long-range correlations can be interpolated by using a non-gradient HRMAS CT-HMBC-1 experiment where the resulting data is processed with forward linear prediction. It has been shown that removing the effects of 1H-1H J-modulation is crucial in order to view cross peaks that correspond to long-range correlations. Additionally, both experiments prove extremely useful over routine one-dimensional 13C HRMAS experiments for extracting carbon chemical shift data. The non-gradient HRMAS BIRD-HMQC and CT-HMBC-1 experiments can be used to assist in conformational analysis and to identify and deconvolute situations where accidental equivalence and seemingly correlated isochronous signals arise.     

Quantitative Determination of Resin Loading in Solid-Phase Organic Synthesis Using (13)C MAS NMR

The use of quantitative carbon nuclear magnetic resonance spectroscopy ((13)C NMR) for the determination of resin loadings has been investigated. Magic angle spinning (MAS) NMR spectra have been obtained for solvent-swollen resins on a conventional 7 mm CP/MAS probe using the two pulse phase modulation (TPPM) proton decoupling sequence. Loadings of resin-bound organic compounds were evaluated via addition of tetrakis(trimethylsilyl)silane as reference or using the carbon resonances of the polymeric resin material as an internal standard. Results for several functionalized Wang and trityl resins are consistent with those obtained using well-established analytical methods. The (13)C NMR method has interesting applications in the field of solid-phase organic synthesis (SPOS), since no functional group acting as a support for the attachment of a quantifiable chromophore must be available in the material of interest.     

Detection of Hindered Rotation and Inversion by NMR Spectroscopy

Rotations and inversions in organic molecules are readily recognizable from the temperature dependence of the NMR spectra. The study of the effects of substituents on the activation barriers of such processes permits the elucidation of reaction mechanisms, and the stability limits of isomers can also be determined. The knowledge of the stability limits is necessary for the specific synthesis of stable rotamers and invertomers.     

Preparation and sorption properties of a β‐cyclodextrin‐linked chitosan derivative

β‐Cyclodextrin (β‐CD) was coupled to chitosan by the intermediate of its monochlorotriazinyl derivative, called βW7MCT, so that a chitosan derivative bearing cyclodextrin was obtained. Because the average degree of substitution of the cyclodextrin derivative was 2.8, the reaction yielded crosslinked insoluble products. The structure of these materials has been investigated by high‐resolution magic‐angle spinning (HRMAS) with gradients. For the first time, HRMAS spectra of chitosan polymers containing β‐CD were obtained. This NMR technique produced one‐ and two‐dimensional well‐resolved solid‐state spectra. These data confirm the proposed structure. Decontamination of waters containing textile dyes were carried out with the crosslinked derivatives. These tests showed that the new chitosan derivatives are characterized by a rate of sorption and a global efficiency superior to that of the parent chitosan polymer and of the well‐known cyclodextrin‐epichlorohydrin gels. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 169–176, 2001     

Solid-phase synthesis of difficult peptide sequences at elevated temperatures: a critical comparison of microwave and conventional heating technologies

The Fmoc/t-Bu solid-phase synthesis of three difficult peptide sequences (a 9-mer, 15-mer, and 24-mer) was performed using N,N'-diisopropylcarbodiimide/1-hydroxybenzotriazole as coupling reagent on polystyrene, Tentagel, and ChemMatrix resins. In order to obtain an insight into the specific role of the elevated temperature and/or the electromagnetic field for peptide syntheses carried out using microwave irradiation, peptide couplings and Fmoc-deprotection steps were studied under microwave and conventionally heated conditions at the same temperature. While room temperature couplings/deprotections generally produced the difficult peptides in rather poor quality, excellent peptide purities were obtained using microwave heating at a temperature of 86 degrees C for both the coupling and deprotection steps in only 10 and 2.5 min reaction time, respectively. While for most amino acids no significant racemization was observed, the high coupling temperatures led to considerable levels of racemization for the sensitive amino acids His and Cys. It was demonstrated for all three peptide sequences that when performing the coupling/deprotection steps at the same reaction temperature using conventional heating, nearly identical results in terms of both peptide purity and racemization levels were obtained. It therefore appears that the main effect of microwave irradiation applied to solid-phase peptide synthesis is a purely thermal effect not related to the electromagnetic field.     

Ex-vivo NMR of unprocessed tissue in water: a simplified procedure for studying intracranial neoplasms

Ex-vivo and in-vitro nuclear magnetic resonance (NMR) spectroscopy techniques have been used for studying chemical metabolites in surgically resected specimens of human neoplasms, and may provide complementary information to in-vivo whole-body magnetic-resonance spectroscopy (MRS). We describe an ex-vivo NMR in water method for measurement of water-soluble metabolites in unprocessed normal rat brain tissue and human intracranial neoplasms. The NMR spectra obtained using the method described here were comparable to those obtained using high-resolution magic-angle spinning (HRMAS) NMR methods, with good correlation in metabolite concentrations relative to creatine (r ² = 0.7635). Improved spectral resolution and baseline were noted compared to HRMAS, but macromolecule resonances were not detected. Ex-vivo NMR of unprocessed tissue in water is rapid and technically simple to perform, and has the potential to be used for direct assessment of intracranial neoplasms.     

Determination of long-range distances and dynamic order parameters by dipolar recoupling in high-resolution magic-angle spinning NMR spectroscopy

By introducing dipolar recoupling methods to high-resolution magic-angle spinning (HRMAS) NMR spectroscopy, a class of experiments has been delevoped that allows the measurement of residual dipole-dipole couplings of approximately 1 Hz in weakly immobilized molecules. Using homonuclear 1H-1H recoupling, distances of up to approximately 8 A can be selectively determined, while heteronuclear 1H-13C recoupling provides access to dynamic order parameters of individual molecular segments on the order of approximately 10-3. The experiments are demonstrated on functionalized oligopeptides that are attached to polymer resins.