Size characterization of green fluorescent protein inclusion bodies in E. coli using asymmetrical flow field-flow fractionation-multi-angle light scattering

The goal of this study was to investigate the applicability of asymmetrical flow field-flow fractionation-multi-angle light scattering (AsFlFFF-MALS) for size analysis of green fluorescent protein inclusion bodies (GFPIBs). The size distributions of GFPIBs prepared by various culture conditions were determined. For GFPIBs prepared at 37 degrees C the peak maximum hydrodynamic diameter (d(H)) first increased and then decreased with the increase of the induction times in the presence of 0.1 and 2 mM isopropyl-beta-D-thiogalactoside (IPTG). For GFPIBs prepared at 30 degrees C the peak maximum d(H) was constant at about 700 nm irrespectively of the induction times and IPTG concentrations.     

Characterization of humic materials by flow field-flow fractionation

Several humic materials are characterized by flow field-flow fractionation, including humic acids, a fulvic acid, and aqueous leachates from compost. Hydrophilic and hydrophobic fractions of a compost leachate were also examined. After characterizing molecular weight distributions, the effect of pH and salt concentration on hydrodynamic size is studied. In general, the hydrodynamic size decreases as the pH is lowered. However, humic acids form large aggregates below pH 5. Small amounts of sodium chloride have little effect on the size distributions. In contrast, a little calcium chloride reduces the hydrodynamic size of individual molecules while inducing the formation of oligomers, although severe aggregation is absent. With further additions of calcium chloride, the decrease in hydrodynamic size continues but oligomer formation subsides. Precise characterization of the unaggregated material is hindered by sample penetration through the channel membrane.     

Characterization of functionalized styrene-butadiene rubber by flow field-flow fractionation/light scattering in organic solvent

Flow field-flow fractionation (FlFFF) using an organic solvent as mobile phase has been effectively utilized for the separation and characterization of functionalized styrene-butadiene rubbers (SBR) that are polymerized and followed by coupling reaction in solution. Separation of broad molecular weight SBR was accomplished by an asymmetrical FlFFF channel in THF under field programming and the molecular weight distribution (MWD) of the SBR sample was determined by on-line measurement of light scattering. In this study, FlFFF has been utilized to characterize high-MW functionalized SBR from the low-MW non-functionalized molecules which were used for coupling reaction to produce high-MW functionalized SBRs, and to determine the coupling number of the functionalized SBRs depending on the type of the coupling reagents. The resulting MWD of the SBR samples prepared by the different coupling reagents (SnCl(4) and a polydimethylsiloxane compound) were compared.     

Fast molecular mass and size characterization of polysaccharides using asymmetrical flow field-flow fractionation-multiangle light scattering

Asymmetrical flow field-flow fractionation (asymmetrical flow FFF), connected on-line to multi-angle light scattering detection (MALS) was shown here to be an efficient method for size characterization of pullulan standards and dextrans ranging from 20 000 up to 2 000 000 in molecular mass. The characterization of molecular mass and the molecular mass distribution of these polysaccharides is often complex and may require different methods. Using asymmetrical flow FFF-MALS, information was obtained not only about molecular mass and molecular mass distribution but also about hydrodynamic size as well as radius of gyration and conformation. The analysis time was very short, often below 5 min. It was shown that the pullulan standards have a narrow molecular mass distribution compared to the more polydisperse dextrans. Obtained molecular masses and distributions were in good agreement with data from the manufacturer. The dextrans, especially at high molecular mass, were found to have a more compact structure than the pullulans in both water and 0.1 M NaCl.     

Carboxymethylation of corn starch and characterization using asymmetrical flow field-flow fractionation coupled with multiangle light scattering

Asymmetrical flow field-flow fractionation (AsFlFFF) was coupled online with multiangle light scattering (MALS) to study the changes in the molecular weight and the size distribution of the corn starch during carboxymethylation. A corn starch was derivatized with sodium chloroacetate in alcoholic medium under alkaline condition to produce carboxymethyl starches (CMS) having various degrees of substitution (DS). The change in thermal characteristics and granule structure of the native corn starch and CMS were compared using Thermogravimetric analysis and scanning electron microscope. The ionic strength of the carrier liquid (water with 0.02% NaN₃) was optimized by adding 50 mM NaNO₃ to minimize the interactions among the starch molecules and between the starch molecules and the AsFlFFF membrane. A field-programmed AsFlFFF allowed determination of the molecular weight distribution (MWD) of starches within about 25 min. It was found that carboxymethylation of starch results in reduction in the molecular weight due to molecular degradation by the alkaline treatment. The weight-average molecular weight (M_w) was reduced down to about 4.4 × 10⁵ from about 7.2 × 10⁶ when DS was 0.14. It seems AsFlFFF coupled with MALS (AsFlFFF/MALS) is a useful tool for monitoring the changes taking place in the molecular weight and the size of starch during derivatization.     

Characterization of sodium hyaluronate blends using frit inlet asymmetrical flow field-flow fractionation and multiangle light scattering

We characterized ultrahigh molecular weight sodium hyaluronate (NaHA) and blended pharmaceutical products containing NaHA using flow field-flow fractionation and multiangle light scattering–differential refractive index (FlFFF-MALS-DRI). NaHA is a water-soluble polysaccharide with a range of molecular weights (MW; 10⁵~10⁸ Da) that is found in body fluids and tissues. NaHA is also used commercially in pharmaceutical and cosmetic applications. We used a frit inlet asymmetrical FlFFF channel to separate aqueous polymers according to their hydrodynamic size, and we used on-line measurements of light scattering to obtain the MW distribution (MWD) as well as structural information about NaHA in aqueous solution. In this study, we investigated NaHA and anti-adhesive blend mixtures of NaHA (a commercial NaHA blend mixture containing sodium carboxymethyl cellulose and a new blend with hydroxyethyl starch (HES)) to determine the molecular weight distribution MWD of NaHA and the blend mixtures and to obtain structural information about these compounds in aqueous solution. We also examined the characteristics of NaHA–HES–polylactic-co-glycolic acid film products exposed to gamma radiation for sterilization purposes.     

Characterisation of core-shell latexes by flow field-flow fractionation with multi-angle light scattering detection

Flat channel asymmetrical flow field-flow fractionation with multi-angle light scattering (MALS) detection was used to study the swelling behaviour of core-shell particles with either carboxylated or hydroxylated shells as a function of pH and ionic strength. The equilibration time of the most heavily carboxylated core-shells appeared to be of the order of several hours. At low ionic strength (5 mM), the carboxylated core-shells showed a definite swelling response to a change in pH in the range from 5 to 10, ranging from a hydrodynamic radius increase of 24 to 118%, depending on the degree of carboxylation. A much milder response was found for the change of the root mean square (r.m.s.) radius as measured with MALS, indicating that the scattering plane is moving inwards during the swelling process due to a decreasing density of the shell. The hydroxylated core-shells appeared to be inert to a change in pH. Also the response of two expanded (pH 10) carboxylated core-shells on increasing ionic strength was studied. Comparison of the results of these ionic strength experiments with theoretical predictions based on Donnan equilibrium led us to the conclusion that a significant amount of counter-ion condensation may take place in the shells.     

Depolymerization study of sodium hyaluronate by flow field-flow fractionation/multiangle light scattering

Thermal depolymerization of ultrahigh-molecular-weight (UHMW) sodium hyaluronate (NaHA) was studied systematically by using frit-inlet asymmetrical flow field-flow fractionation/multiangle light scattering/differential refractive index (FI-AFlFFF/MALS/DRI). FI-AFlFFF was utilized for the size separation of NaHA samples which had been thermally degraded for varied treatment times, followed by light-scattering detection to determine MW and structural information of degraded NaHA products. Analysis of NaHA products showed time-dependent depolymerization of raw molecules into smaller-MW components, as well as unfolding of compact structures of UHMW NaHA. To determine whether the observed decrease in MW of sodium hyaluronate originated from the chain degradation of UHMW molecules or from dissociation of entangled complex particles that may have been formed by intermolecular association, narrow size fractions (1 × 10⁷–6 × 10⁷ and >6 × 10⁷ MW) of NaHA molecules were collected during FlFFF separation and followed by thermal treatment. Subsequent FI-AFlFFF/MALS analysis of collected fractions after thermal treatment suggested that the ultrahigh-MW region (>10⁷ Da) of NaHA is likely to result from supermolecular structures formed by aggregation of large molecules.     

基于非对称场流分离技术分离表征小米淀粉

基于非对称场流分离技术耦合多角度激光光散射检测器和示差折光检测器,建立了分离表征小米淀粉的方法。研究了进样量、交叉流流速、半衰期（t_1/2）、载液离子强度和pH值对小米淀粉分离效果的影响;考察了该方法的重现性;探究了小米淀粉分子结构。结果表明,在进样体积为50 μL、进样质量浓度为0.50 g/L、交叉流流速为1.2 mL/min、t_1/2=3 min、载液为10 mmol/L pH 7.00 NaNO₃（含3 mmol/L NaN₃）的条件下,小米淀粉分离效果最佳。该方法具有良好的重现性,得到的小米淀粉的回转半径相对标准偏差为3.4%、摩尔质量相对标准偏差为7.0%。     

Size separations of starch of different botanical origin studied by asymmetrical-flow field-flow fractionation and multiangle light scattering

Asymmetrical-flow field-flow fractionation combined with multiangle light scattering and refractive index detection has been revealed to be a powerful tool for starch characterization. It is based on size separation according to the hydrodynamic diameter of the starch components. Starch from a wide range of different botanical sources were studied, including normal starch and high-amylose and high-amylopectin starch. The starch was dissolved by heat treatment at elevated pressure in a laboratory autoclave. This gave clear solutions with no granular residues. Amylose retrogradation was prevented by using freshly dissolved samples. Programmed cross flow starting at 1.0 mL min(-1) and decreasing exponentially with a half-life of 4 min was utilised. The starches showed two size populations representing mainly amylose and mainly amylopectin with an overlapping region where amylose and amylopectin were possibly co-eluted. Most of the first population had molar masses below 10(6) g mol(-1), and most of the second size population had molar masses above 10(7) g mol(-1). Large differences were found in the relative amounts of the two populations, the molar mass, and hydrodynamic diameters, depending on the plant source and its varieties.     

Development of asymmetrical flow field-flow fractionation-multi angle laser light scattering analysis for molecular mass characterization of cationic potato amylopectin

The goal of this study is to investigate the applicability of asymmetrical flow field-flow fractionation (AsFlFFF)-multi angle laser light scattering (MALLS), and to develop a method for analysis of cationic potato amylopectin (CPAP) having ultrahigh molecular mass (UHMr). Use of the aqueous carrier having low salt content (3 mM NaN3) resulted in a distortion in AsFlFFF fractograms of CPAP with a general pattern of a sharp rise at the beginning of the elution followed by a long tailing, probably due to combination of attractive and repulsive charge interactions (attractive interaction between CPAP molecules and the channel membrane, and repulsion among cationic CPAP molecules). As the cross flow-rate (Fc) increases, the tailing tends to increase, and the repeatability of the AsFlFFF retention data tends to decrease, which is an indication of the presence of the charge interactions. The tailing gradually decreased, and the repeatability of the AsFIFFF retention data increased, as the salt content of the carrier increased. The distortion of the fractogram finally disappeared at Fc of about 0.2 ml/min and the channel flow-rate (F(out)) of about 1 ml/min with the aqueous carrier having the salt content of 40 mM (3 mM NaN3 +37 mM NaNO3). The weight-average molecular mass (Mw) and the z-average radius of gyration ((rg),) determined by MALLS were 5.2 x 10(7) and 34 x 10(1) nm, respectively. With the flow-rate ratio, Fc/F(out) kept constant, the degree of the charge interactions (and thus the distortion of fractogram) seems to increase with the cross flow-rate (Fc) and with the sample injection mass. AsFIFFF-MALLS was applied for determination of molecular mass distributions (MrDs) and the sizes of CPAPs prepared by various cooking procedures.     

Retention behaviour of amylopectins in asymmetrical flow field-flow fractionation studied by multi-angle light scattering detection

Asymmetrical flow field-flow fractionation (FFF) with multi-angle light scattering (MALS) detection was applied for the fractionation of amylopectins from four different sources. Samples originated from genetically modified potatoes and waxy maize. Amylopectins were dissolved in a 1 mol l(-1) sodium hydroxide solution or water. With an injected mass of 0.2 microg, well below overloading conditions, a decrease of the apparent hydrodynamic radius with increasing inlet flow-rate was observed. Moreover, a decrease of the radius of gyration with increasing elution volume was recorded by the MALS detector. Steric/hyperlayer effects are a feasible explanation for this behaviour. The observed radius of gyration at the steric inversion point was in the order of 0.3 microm, which is smaller than the theoretically calculated inversion point. Apparently, the amylopectin behave as macromolecules with a larger hydrodynamic radius than expected on basis of their radius of gyration and are subjected to significant lift forces. The results were confirmed by four fractionations with varying flow-rates but constant ratio of cross to outlet-flow. In contrast to the normal mode operation, the retention of the amylopectins depended strongly on the applied flow-rates and was close to that of a much smaller 10 kDa dextran. Apparent molar masses in the order of between 10(7) and 10(9) g mol(-1) were obtained. The results are contrasted with enzymatically degraded and oxidised starch samples that were fractionated in the normal mode.     

Characterization of oat proteins and aggregates using asymmetric flow field-flow fractionation

The soluble proteins and protein aggregates in Belinda oats were characterized using asymmetric flow field-flow fractionation (AF4) coupled with online UV–vis spectroscopy and multiangle light-scattering detection (MALS). Fractions from the AF4 separation were collected and further characterized by sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE). The AF4 fractogram of the oat extracts revealed three peaks which were determined to be monomeric forms of soluble proteins, globulin aggregates, and β-glucan, respectively. The early eluting monomeric proteins ranged in molar mass (MM) between 5 and 90 kg/mol and in hydrodynamic diameter (D _h) from 1.6 to 13 nm. The MM at peak maximum of the globulin aggregate peak was found to be ～300 kg/mol and the D _h was measured to be ～20 nm. SDS-PAGE of the collected fraction across this peak revealed two bands with MM of 37 and 27 kg/mol which correspond to the α and β subunits of globulin indicating the elution of globulin aggregates. A third peak at long retention time was determined to be β-glucan through treatment of the oat extract with β-glucanase and by injection of β-glucan standards. The amount of soluble protein was measured to be 83.1?±?2.3 wt.%, and the amount of albumin proteins was measured to be 17.6?±?5.7 wt.% of the total protein in the oats. The results for Belinda oat extracts show that the AF4-MALS/UV platform is capable of characterizing the physicochemical properties such as MM and hydrodynamic size distribution of proteins and protein aggregates within a complicated food matrix environment and without the need to generate protein isolates.

非对称场流分离系统的构建及其在淀粉颗粒粒径表征中的应用

淀粉颗粒粒径与分子尺寸分别在1～100μm和20～250 nm之间,是影响淀粉功能特性的重要因素之一.非对称场流分离(AF4)是一种基于样品与外力场相互作用机制的分离技术,已应用于表征淀粉分子尺寸分布.商品化的AF4系统的粒径检测范围为1 nm～10μm,对于淀粉颗粒粒径表征具有一定的局限性.该文研制了AF4分离系统;...     

Characterization of branched ultrahigh molar mass polymers by asymmetrical flow field-flow fractionation and size exclusion chromatography

The molar mass distribution (MMD) of synthetic polymers is frequently analyzed by size exclusion chromatography (SEC) coupled to multi angle light scattering (MALS) detection. For ultrahigh molar mass (UHM) or branched polymers this method is not sufficient, because shear degradation and abnormal elution effects falsify the calculated molar mass distribution and information on branching. High temperatures above 130 °C have to be applied for dissolution and separation of semi-crystalline materials like polyolefins which requires special hardware setups. Asymmetrical flow field-flow fractionation (AF4) offers the possibility to overcome some of the main problems of SEC due to the absence of an obstructing porous stationary phase. The SEC-separation mainly depends on the pore size distribution of the used column set. The analyte molecules can enter the pores of the stationary phase in dependence on their hydrodynamic volume. The archived separation is a result of the retention time of the analyte species inside SEC-column which depends on the accessibility of the pores, the residence time inside the pores and the diffusion ability of the analyte molecules. The elution order in SEC is typically from low to high hydrodynamic volume. On the contrary AF4 separates according to the diffusion coefficient of the analyte molecules as long as the chosen conditions support the normal FFF-separation mechanism. The separation takes place in an empty channel and is caused by a cross-flow field perpendicular to the solvent flow. The analyte molecules will arrange in different channel heights depending on the diffusion coefficients. The parabolic-shaped flow profile inside the channel leads to different elution velocities. The species with low hydrodynamic volume will elute first while the species with high hydrodynamic volume elute later. The AF4 can be performed at ambient or high temperature (AT-/HT-AF4). We have analyzed one low molar mass polyethylene sample and a number of narrow distributed polystyrene standards as reference materials with known structure by AT/HT-SEC and AT/HT-AF4. Low density polyethylenes as well as polypropylene and polybutadiene, containing high degrees of branching and high molar masses, have been analyzed with both methods. As in SEC the relationship between the radius of gyration (R(g)) or the molar mass and the elution volume is curved up towards high elution volumes, a correct calculation of the MMD and the molar mass average or branching ratio is not possible using the data from the SEC measurements. In contrast to SEC, AF4 allows the precise determination of the MMD, the molar mass averages as well as the degree of branching because the molar mass vs. elution volume curve and the conformation plot is not falsified in this technique. In addition, higher molar masses can be detected using HT-AF4 due to the absence of significant shear degradation in the channel. As a result the average molar masses obtained from AF4 are higher compared to SEC. The analysis time in AF4 is comparable to that of SEC but the adjustable cross-flow program allows the user to influence the separation efficiency which is not possible in SEC without a costly change of the whole column combination.     

Optimisation of ambient and high temperature asymmetric flow field-flow fractionation with dual/multi-angle light scattering and infrared/refractive index detection

Asymmetric flow field-flow fractionation (AF4) enables to analyse polymers with very high molar masses under mild conditions in comparison to size exclusion chromatography (SEC). Conventionally, membranes for AF4 are made from cellulose. Recently, a novel ceramic membrane has been developed which can withstand high temperatures above 130 °C and chlorinated organic solvents, thus making it possible to characterise semicrystalline polyolefins by HT-AF4. Two ceramic membranes and one cellulose membrane were compared with regard to their quality of molar mass separation and the loss of the polymer material through the pores. Separating polystyrene standards as model compounds at different cross-flow gradients the complex relationship between cross-flow velocity, separation efficiency, the molar mass and peak broadening could be elucidated in detail. Moreover, the dependence of signal quality and reproducibility on sample concentration and mass loading was investigated because the evaluation of the obtained fractograms substantially depends on the signal intensities. Finally, the performance of the whole system was tested at high temperature by separating PE reference materials of high molar mass.     

Characterization of winemaking yeast by cell number-size distribution analysis through flow field-flow fractionation with multi-wavelength turbidimetric detection

Yeasts are widely used in several areas of food industry, e.g. baking, beer brewing, and wine production. Interest in new analytical methods for quality control and characterization of yeast cells is thus increasing. The biophysical properties of yeast cells, among which cell size, are related to yeast cell capabilities to produce primary and secondary metabolites during the fermentation process. Biophysical properties of winemaking yeast strains can be screened by field-flow fractionation (FFF). In this work we present the use of flow FFF (FlFFF) with turbidimetric multi-wavelength detection for the number-size distribution analysis of different commercial winemaking yeast varieties. The use of a diode-array detector allows to apply to dispersed samples like yeast cells the recently developed method for number-size (or mass-size) analysis in flow-assisted separation techniques. Results for six commercial winemaking yeast strains are compared with data obtained by a standard method for cell sizing (Coulter counter). The method here proposed gives, at short analysis time, accurate information on the number of cells of a given size, and information on the total number of cells.