Peapod‐Type Nanocomposites through the In Situ Growth of Gold Nanoparticles within Preformed Hexaniobate Nanoscrolls

A facile in situ method to grow Au nanoparticles (NPs) in hexaniobate nanoscrolls is applied to the formation of plasmonic Au@hexaniobate and bifunctional plasmonic‐magnetic Au‐Fe₃O₄@hexaniobate nanopeapods (NPPs). Utilizing a solvothermal treatment, rigid multiwalled hexaniobate nanoscrolls and partially filled Fe₃O₄@hexaniobate NPPs were first fabricated. These nanostructures were then used as templates for the controlled in situ growth of Au NPs. The resulting peapod structures exhibited high filling fractions and long‐range uniformity. Optical measurements showed a progressive red shift in plasmonic behavior between Au NPs, Au NPPs, and Au‐Fe₃O₄ NPPs; magnetic studies found that the addition of gold in the Fe₃O₄@hexaniobate NPPs reduced interparticle coupling effects. The development of this approach allows for the routine bulk preparation of noble‐metal‐containing bifunctional nanopeapod materials.     

Highly Sensitive and Selective Fluorescence “Turn-On” Detection of Pb (II) Based on Fe3O4@Au–FITC Nanocomposite

New nanocomposites, Fe₃O₄@Au–FITC, were prepared and explored to develop a fluorescent detection of Pb²⁺. The Fe₃O₄@AuNPs–FITC nanocomposites could be etched by Pb²⁺ in the presence of Na₂S₂O₃, leading to fluorescence recovery of FITC quenched by Fe₃O₄@Au nanocomposites. With the increase of Pb²⁺ concentration, the fluorescence recovery of Fe₃O₄@AuNPs–FITC increased gradually. Under optimized conditions, a detection limit of 5.2 nmol/L of Pb²⁺ with a linear range of 0.02–2.0 µmol/L were obtained. The assay demonstrated negligible response to common metal ions. Recoveries of 98.2–106.4% were obtained when this fluorescent method was applied in detecting Pb²⁺ spiked in a lake-water sample. The above results demonstrated the high potential of ion-induced nanomaterial etching in developing robust fluorescent assays.     

Lanthanide Molecular Species Generated Fe3O4@SiO2-TbDPA Nanosphere for the Efficient Determination of Nitrite

The presence of nitrite (NO₂⁻) in water and food leads to serious problems in public health and the environment. Therefore, it is important to develop a rapid and efficient method for the selective detection of NO₂⁻. In this work, the synthesis and characterization of magnetic Fe₃O₄@SiO₂-TbDPA nanoprobe have been carried out. The Fe₃O₄@SiO₂-TbDPA aqueous solution exhibits a strong green emission. Due to the addition of various concentrations of NO₂⁻ (0–100 μM), the fluorescence intensity has been suppressed. The nanoprobe Fe₃O₄@SiO₂-TbDPA exhibits excellent selectivity and sensitivity toward NO₂⁻ ions. Excellent linearity is obtained in the range of 5–80 μM with a detection limit of 1.03 μM. Furthermore, the presence of magnetic Fe₃O₄ nanoparticles in Fe₃O₄@SiO₂-TbDPA nanospheres will also facilitate the effective separation of Fe₃O₄@SiO₂-TbDPA from the aqueous solution. Our proposed strategy is expected to fabricate an organic-inorganic hybrid magnetic nanomaterial and can be used as an efficient sensor. It has been shown that this new strategy has numerous advantages, such as high stability, selectivity, and simplicity of operation. It demonstrates great potential for simple and convenient NO₂⁻ detection. It may expand to a variety of ranges in environmental monitoring and biomedical fields.     

Free-standing 2D non-van der Waals antiferromagnetic hexagonal FeSe semiconductor: halide-assisted chemical synthesis and Fe2+ related magnetic transitions

The scarcity of two-dimensional (2D) magnetic nanostructures has hindered their applications in spintronics, which is attributed to that most magnetic materials exhibit non-van der Waals (nvdWs) structures and it is hard to reduce their thickness to 2D nanostructures. Thus it is necessary to develop a promising strategy for free-standing 2D magnetic nvdWs nanostructures. We have achieved free-standing 2D nvdWs hexagonal FeSe with a thickness of 2.9 nm by the reaction between the oleylamine–Se complex and Fe²⁺ with the assistance of Cl⁻, where the synergetic effects of Cl⁻ and –NH₂ lead to anisotropic growth. Inspiringly, the 2D hexagonal FeSe exhibits intrinsic antiferromagnetic order rooted in Fe²⁺ and semiconducting nature. In addition, the temperature variation would result in the chemical environment changes of Fe²⁺, responsible for the temperature-dependent magnetic transitions. This work promotes the potential applications of 2D hexagonal FeSe and the preparation of other 2D nvdWs materials.

Free-standing two-dimensional non-layered hexagonal FeSe with intrinsic antiferromagnetic and semiconducting nature has been achieved by a wet-chemical method. The chemical environment change of Fe²⁺ would induce the magnetic transition of FeSe.     

Magnetic-controllable Janus fibrous membranes with wind-resistant floatability for airflow-enhanced solar evaporation

Interfacial solar evaporation has been widely regarded as a promising pathway to desalinate seawater without secondary pollution and additional carbon emission. However, one of the challenges rarely considered is the floating stability and remote controllability of the evaporator in the face of wind and waves at the seawater surface. Herein, we demonstrate magnetic Janus membranes (MJMs) with remotely magnetic controllability and wind-resistant floatation for enhanced interfacial solar evaporation in airflow condition. These membranes are fabricated by sequential electrospinning of a hydrophobic Fe₃O₄-embedded polyvinylidene fluoride (PVDF) layer and a hydrophilic polyacrylonitrile (PAN) layer. Due to the superparamagnetism of Fe₃O₄, our MJMs can be remotely manipulated by a magnet and can float in situ with the aid of a magnetic field, even facing the blast of airflow with a speed of 1.75 m/s. Moreover, the MJMs realize an enhanced vapor diffusion under airflow (v = 0.5 m/s) and show a water evaporation rate of 1.39 ± 0.06 kg∙m⁻²∙h⁻¹ under one sun, which is 40.4% higher than that in windless condition. This work provides a promising material solution with magnetic design for the practical offshore application of Janus membranes in interfacial solar evaporation.     

Anisotropic Magnetite Nanorods for Enhanced Magnetic Hyperthermia

There is an increasing need for new strategies to improve the heating efficiency or the specific absorption rate (SAR) of magnetite (Fe₃O₄), which is the only FDA approved magnetic material. We propose a facile approach to obtain well‐dispersed highly crystalline Fe₃O₄ nanorods (NRs) by the reduction of β‐FeOOH in an organic solvent and demonstrate that the SAR of Fe₃O₄ NRs can be enhanced by tuning their aspect ratios. Fe₃O₄ NRs with an aspect ratio of 4.5 have a much higher SAR as compared with 15 nm Fe₃O₄ nanoparticles and Fe₃O₄ NRs counterparts with an aspect ratio of 10. The highest SAR is greatly increased up to 1072 W g^?1 for an ac field of 33 kA m^?1 and a concentration of 5 mg mL^?1, which is mostly attributed to hysteresis losses. These findings pave a new pathway for the design and synthesis of novel anisotropic iron oxide nanostructures with an optimal heating efficiency for advanced hyperthermia.     

The Synthesis Methodology of PEGylated Fe3O4@Ag Nanoparticles Supported by Their Physicochemical Evaluation

Many investigations are currently being performed to develop the effective synthesis methodology of magnetic nanoparticles with appropriately functionalized surfaces. Here, the novelty of the presented work involves the preparation of nano-sized PEGylated Fe₃O₄@Ag particles, i.e., the main purpose was the synthesis of magnetic nanoparticles with a functionalized surface. Firstly, Fe₃O₄ particles were prepared via the Massart process. Next, Ag+ reduction was conducted in the presence of Fe₃O₄ particles to form a nanosilver coating. The reaction was performed with arabic gum as a stabilizing agent. Sound energy-using sonication was applied to disintegrate the particles’ agglomerates. Next, the PEGylation process aimed at the formation of a coating on the particles’ surface using PEG (poly(ethylene glycol)) has been performed. It was proved that the arabic gum limited the agglomeration of nanoparticles, which was probably caused by the steric effect caused by the branched compounds from the stabilizer that adsorbed on the surface of nanoparticles. This effect was also enhanced by the electrostatic repulsions. The process of sonication caused the disintegration of aggregates. Formation of iron (II, III) oxide with a cubic structure was proved by diffraction peaks. Formation of a nanosilver coating on the Fe₃O₄ nanoparticles was confirmed by diffraction peaks with 2θ values 38.15° and 44.35°. PEG coating on the particles’ surface was proven via FT-IR (Fourier Transform Infrared Spectroscopy) analysis. Obtained PEG–nanosilver-coated Fe₃O₄ nanoparticles may find applications as carriers for targeted drug delivery using an external magnetic field.     

Novel electromagnetic functionalized γ‐Fe2O3/polypyrrole composite nanostructures with high conductivity

In general, the conductivity of polypyrrole (PPy) is reduced by addition of magnetic nanoparticles as the additives owing to insulating effect of magnetic nanoparticles. In this article, novel electromagnetic functionalized PPy composite nanostructures were prepared by a template‐free method associated with γ‐Fe₂O₃ nano‐needles as the hard templates in the presence of p‐toluene‐sulfonic acid (p‐TSA) and FeCl₃·6H₂O as the dopant and oxidant, respectively. It was found that the molar ratio of γ‐Fe₂O₃ to pyrrole monomer represented by [γ‐Fe₂O₃]/[Py] ratio strongly affected the morphology and the conductivity of the γ‐Fe₂O₃/PPy composite nanostructures. A growth mechanism for the composite nanostructures was proposed based on the variance of the morphology with the [γ‐Fe₂O₃]/[Py] ratio. Compared with previously reported γ‐Fe₂O₃/PPy composites, the as‐prepared novel composite nanostructures showed much higher conductivity (up to ～50 times higher). Moreover, the synthesized γ‐Fe₂O₃/PPy composite nanostructures displayed ferromagnetic behavior with a high coercive force. Explanations for these interesting observations were made in terms of the magnetic interaction between ferromagnetic γ‐Fe₂O₃ nano‐needles and spin‐polaron of PPy nanotubes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4446–4453, 2009     

The impact on the magnetic field growth of half-metallic Fe3O4 thin films

Half-metallic Fe₃O₄ films grown on a Si (100) substrate with a tantalum (Ta) buffer layer were prepared by DC magnetron reactive sputtering. Primary emphasis was placed on magnetic field growth of Fe₃O₄ thin film. The experiment's results showed that applying an external magnetic field to the samples during the growth was efficient to promote the polycrystalline Fe₃O₄ growth along certain directions. The magnetoresistance (MR) was also tested for comparison of the samples prepared with and without an external magnetic field, and showed that applying an external magnetic field can promote the MR values.     

General Route to Multifunctional Uniform Yolk/Mesoporous Silica Shell Nanocapsules: A Platform for Simultaneous Cancer‐Targeted Imaging and Magnetically Guided Drug Delivery

Hollow mesoporous SiO₂ (mSiO₂) nanostructures with movable nanoparticles (NPs) as cores, so‐called yolk‐shell nanocapsules (NCs), have attracted great research interest. However, a highly efficient, simple and general way to produce yolk‐mSiO₂ shell NCs with tunable functional cores and shell compositions is still a great challenge. A facile, general and reproducible strategy has been developed for fabricating discrete, monodisperse and highly uniform yolk‐shell NCs under mild conditions, composed of mSiO₂ shells and diverse functional NP cores with different compositions and shapes. These NPs can be Fe₃O₄ NPs, gold nanorods (GNRs), and rare‐earth upconversion NRs, endowing the yolk‐mSiO₂ shell NCs with magnetic, plasmonic, and upconversion fluorescent properties. In addition, multifunctional yolk‐shell NCs with tunable interior hollow spaces and mSiO₂ shell thickness can be precisely controlled. More importantly, fluorescent‐magnetic‐biotargeting multifunctional polyethyleneimine (PEI)‐modified fluorescent Fe₃O₄@mSiO₂ yolk‐shell nanobioprobes as an example for simultaneous targeted fluorescence imaging and magnetically guided drug delivery to liver cancer cells is also demonstrated. This synthetic approach can be easily extended to the fabrication of multifunctional yolk@mSiO₂ shell nanostructures that encapsulate various functional movable NP cores, which construct a potential platform for the simultaneous targeted delivery of drug/gene/DNA/siRNA and bio‐imaging.     

Preparation of Hollow Core–Shell Fe3O4/Nitrogen-Doped Carbon Nanocomposites for Lithium-Ion Batteries

Iron oxides are potential electrode materials for lithium-ion batteries because of their high theoretical capacities, low cost, rich resources, and their non-polluting properties. However, iron oxides demonstrate large volume expansion during the lithium intercalation process, resulting in the electrode material being crushed, which always results in poor cycle performance. In this paper, to solve the above problem, iron oxide/carbon nanocomposites with a hollow core–shell structure were designed. Firstly, an Fe₂O₃@polydopamine nanocomposite was prepared using an Fe₂O₃ nanocube and dopamine hydrochloride as precursors. Secondly, an Fe₃O₄@N-doped C composite was obtained by means of further carbonization treatment. Finally, Fe₃O₄@void@N-Doped C-x composites with core–shell structures with different void sizes were obtained by means of Fe₃O₄ etching. The effect of the etching time on the void size was studied. The electrochemical properties of the composites when used as lithium-ion battery materials were studied in more detail. The results showed that the sample that was obtained via etching for 5 h using 2 mol L⁻¹ HCl solution at 30 °C demonstrated better electrochemical performance. The discharge capacity of the Fe₃O₄@void@N-Doped C-5 was able to reach up to 1222 mA g h⁻¹ under 200 mA g⁻¹ after 100 cycles.     

Fabrication of Magnetic Al-Based Fe3O4@MIL-53 Metal Organic Framework for Capture of Multi-Pollutants Residue in Milk Followed by HPLC-UV

The efficient capture of multi-pollutant residues in food is vital for food safety monitoring. In this study, in-situ-fabricated magnetic MIL-53(Al) metal organic frameworks (MOFs), with good magnetic responsiveness, were synthesized and applied for the magnetic solid-phase extraction (MSPE) of chloramphenicol, bisphenol A, estradiol, and diethylstilbestrol. Terephthalic acid (H₂BDC) organic ligands were pre-coupled on the surface of amino-Fe₃O₄ composites (H₂BDC@Fe₃O₄). Fe₃O₄@MIL-53(Al) MOF was fabricated by in-situ hydrothermal polymerization of H₂BDC, Al (NO₃)₃, and H₂BDC@Fe₃O₄. This approach highly increased the stability of the material. The magnetic Fe₃O₄@MIL-53(Al) MOF-based MSPE was combined with high-performance liquid chromatography-photo diode array detection, to establish a novel sensitive method for analyzing multi-pollutant residues in milk. This method showed good linear correlations, in the range of 0.05–5.00 μg/mL, with good reproducibility. The limit of detection was 0.004–0.108 μg/mL. The presented method was verified using a milk sample, spiked with four pollutants, which enabled high-throughput detection and the accuracies of 88.17–107.58% confirmed its applicability, in real sample analysis.     

Green synthesis of Ag/Fe3O4 nanoparticles using Mentha extract: Preparation,characterization and investigation of its anti-human lung cancer application

In this study, silver nanoparticles (Ag NPs) were decorated on the surface of magnetic nanoparticles in an eco-friendly pathway applying Mentha extract as reducing/stabilizing agent. The morphological and physicochemical features of the prepared Ag/Fe₃O₄nanocomposite were determined using several advanced techniques. Hence, our protocol is green and advantageous in terms of- i) biochemical modified biocompatible nanocomposite; ii) nanomaterial providing high surface area and larger number reactive sites; iii) very simplistic synthetic procedure; vi) very low load of metal in the composite and v) high yield in short time. In the medicinal part, the anticancer properties of Ag/Fe₃O₄ nanocomposite against lung cancer cell lines were determined. The free radical for the antioxidant effects was DPPH. The IC₅₀ of Ag/Fe₃O₄ nanocomposite was 200 µg/ml in the antioxidant test. The IC₅₀ of the Ag/Fe₃O₄ nanocomposite were 183, 176, 169, and 125 µg/mL against lung cancer (NCI-H661, NCI-H1975, NCI-H1573, and NCI-H1563) cell lines, respectively. In addition, the current study offer that Ag/Fe₃O₄ nanocomposite could be a new potential adjuvant chemopreventive and chemotherapeutic agent against cytotoxic cells.     

Hydrothermal Synthesis and Properties of Controlled α‐Fe2O3 Nanostructures in HEPES Solution

A facile, template‐free, and environmentally friendly hydrothermal strategy was explored for the controllable synthesis of α‐Fe₂O₃ nanostructures in HEPES solution (HEPES=2‐[4‐(2‐hydroxyethyl)‐1‐piperazinyl]ethanesulfonic acid). The effects of experimental parameters including HEPES/FeCl₃ molar ratio, pH value, reaction temperature, and reaction time on the formation of α‐Fe₂O₃ nanostructures have been investigated systematically. Based on the observations of the products, the function of HEPES in the reaction is discussed. The different α‐Fe₂O₃ nanostructures possess different optical, magnetic properties, and photocatalytic activities, depending on the shape and size of the sample. In addition, a novel and facile approach was developed for the synthesis of Au/α‐Fe₂O₃ and Ag/α‐Fe₂O₃ nanocomposites in HEPES buffer solution; this verified the dual function of HEPES both as reductant and stabilizer. This work provides a new strategy for the controllable synthesis of transition metal oxide nanostructures and metal‐supported nanocomposites, and gives a strong evidence of the relationship between the property and morphology/size of nanomaterials.     

Adsorption of Crystal Violet Dye Using Activated Carbon of Lemon Wood and Activated Carbon/Fe3O4 Magnetic Nanocomposite from Aqueous Solutions: A Kinetic,Equilibrium and Thermodynamic Study

Activated carbon prepared from lemon (Citrus limon) wood (ACL) and ACL/Fe₃O₄ magnetic nanocomposite were effectively used to remove the cationic dye of crystal violet (CV) from aqueous solutions. The results showed that Fe₃O₄ nanoparticles were successfully placed in the structure of ACL and the produced nanocomposites showed superior magnetic properties. It was found that pH was the most effective parameter in the CV dye adsorption and pH of 9 gave the maximum adsorption efficiency of 93.5% and 98.3% for ACL and ACL/Fe₃O₄, respectively. The Dubinin–Radushkevich (D-R) and Langmuir models were selected to investigate the CV dye adsorption equilibrium behavior for ACL and ACL/Fe₃O₄, respectively. A maximum adsorption capacity of 23.6 and 35.3 mg/g was obtained for ACL and ACL/Fe₃O₄, respectively indicating superior adsorption capacity of Fe₃O₄ nanoparticles. The kinetic data of the adsorption process followed the pseudo-second order (PSO) kinetic model, indicating that chemical mechanisms may have an effect on the CV dye adsorption. The negative values obtained for Gibb’s free energy parameter (−20 < ΔG < 0 kJ/mol) showed that the adsorption process using both types of the adsorbents was physical. Moreover, the CV dye adsorption enthalpy (ΔH) values of −45.4 for ACL and −56.9 kJ/mol for ACL/Fe₃O₄ were obtained indicating that the adsorption process was exothermic. Overall, ACL and ACL/Fe₃O₄ magnetic nanocomposites provide a novel and effective type of adsorbents to remove CV dye from the aqueous solutions.     

Self-assembly approach for the synthesis of electro-magnetic functionalized Fe3O4/polyaniline nanocomposites: Effect of dopant on the properties

Electro-magnetic functionalized Fe₃O₄/polyaniline (PANI) nanocomposites were synthesized by chemical oxidative polymerization in the presence of ammonium peroxydisulfate as an oxidizing agent. Polymerization was carried out independently using two different types of dopants, organic acids (camphorsulfonic acid (CSA) and p-toluenesulfonic acid (TSA)) and inorganic acid (hydrochloric acid). A plausible mechanism for the formation of the nanocomposites (NCs) is presented. During the formation of NCs, CSA/TSA also serves as a micellar template, whereas micelle formation is absent in the case of HCl. Fe₃O₄/PANI-CSA-NC, Fe₃O₄/PANI-TSA-NC and Fe₃O₄/PANI-HCl-NC were characterized for morphology, molecular structure, electrical conductivity and magnetic properties by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV–visible spectroscopy (UV–vis) and superconductor quantum interference device (SQUID) measurements. The results indicate that dopant influence the properties of the NCs. TEM photographs of Fe₃O₄/PANI-CSA and Fe₃O₄/PANI-TSA reveal that the composite particles are spherical having a layer of PANI-CSA or PANI-TSA over Fe₃O₄ nanoparticles. Fe₃O₄/PANI-CSA-NC and Fe₃O₄/PANI-TSA-NC have better morphology, conductivity and high magnetic saturation (M_s) than that of Fe₃O₄/PANI-HCl-NC. Under applied magnetic field, the NCs exhibit the hysteresis loops of the ferromagnetic behavior. M_s value varies with content of Fe₃O₄ present in the composites.     

Rapid Screening of Lipase Inhibitors in Scutellaria baicalensis by Using Porcine Pancreatic Lipase Immobilized on Magnetic Core–Shell Metal–Organic Frameworks

As for ligand fishing, the current immobilization approaches have some potential drawbacks such as the small protein loading capacity and difficult recycle process. The core–shell metal–organic frameworks composite (Fe₃O₄-COOH@UiO-66-NH₂), which exhibited both magnetic characteristics and large specific surface area, was herein fabricated and used as magnetic support for the covalent immobilization of porcine pancreatic lipase (PPL). The resultant composite Fe₃O₄-COOH@UiO-66-NH₂@PPL manifested a high loading capacity (247.8 mg/g) and relative activity recovery (101.5%). In addition, PPL exhibited enhanced tolerance to temperature and pH after immobilization. Then, the composite Fe₃O₄-COOH@UiO-66-NH₂@PPL was incubated with the extract of Scutellaria baicalensis to fish out the ligands. Eight lipase inhibitors were obtained and identified by UPLC-Q-TOF-MS/MS. The feasibility of the method was further confirmed through an in vitro inhibitory assay and molecular docking. The proposed ligand fishing technique based on Fe₃O₄-COOH@UiO-66-NH₂@PPL provided a feasible, selective, and effective platform for discovering enzyme inhibitors from natural products.     

Extending Surface-Enhanced Raman Spectroscopy to Liquids Using Shell-Isolated Plasmonic Superstructures

Plasmonic superstructures (PS) based on Au/SiO₂ were prepared for Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy (SHINERS) in liquid phase applications. These superstructures are composed of functionalized SiO₂ spheres with plasmonic Au nanoparticles (NPs) on their surface. Functionalization was performed with (3-aminopropyl)trimethoxysilane, (3-mercaptopropyl)trimethoxysilane and poly(ethylene-imine) (PEI). Of these three, PEI-functionalized spheres showed the highest adsorption density of Au NPs in TEM, UV/Vis and dynamic light scattering (DLS) experiments. Upon decreasing the Au NP/SiO₂ sphere size ratio, an increase in adsorption density was also observed. To optimize plasmonic activity, 61 nm Au NPs were adsorbed onto 900 nm SiO₂-PEI spheres and these PS were coated with an ultrathin layer (1–2 nm) of SiO₂ to obtain Shell-Isolated Plasmonic Superstructures (SHIPS), preventing direct contact between Au NPs and the liquid medium. Zeta potential measurements, TEM and SHINERS showed that SiO₂ coating was successful. The detection limit for SHINERS using SHIPS and a 638 nm laser was around 10⁻¹² m of Rhodamine (10⁻¹⁵ m for uncoated PS), all with acquisition settings suitable for catalysis applications.     

Iron oxide nanoparticles coated with green tea extract as a novel magnetite reductant and stabilizer sorbent for silver ions: Synthetic application of Fe3O4@green tea/Ag nanoparticles as magnetically separable and reusable nanocatalyst for reduction of 4‐nitrophenol

Green tea extract having many phenolic hydroxyl and carbonyl functional groups in its molecular framework can be used in the modification of Fe₃O₄ nanoparticles. Moreover, the feasibility of complexation of polyphenols with silver ions in aqueous solution can improve the surface properties and capacity of the Fe₃O₄@green tea extract nanoparticles (Fe₃O₄@GTE NPs) for sorption and reduction of silver ions. Therefore, the novel Fe₃O₄@GTE NPs nano‐sorbent has potential ability as both reducing and stabilizing agent for immobilization of silver nanoparticles to make a novel magnetic silver nanocatalyst (Fe₃O₄@GTE/Ag NPs). Inductively coupled plasma analysis, transmission and scanning electron microscopies, energy‐dispersive X‐ray and Fourier transform infrared spectroscopies, and vibrating sample magnetometry were used to characterize the catalyst. Fe₃O₄@GTE/Ag NPs shows high catalytic activity as a recyclable nanocatalyst for the reduction of 4‐nitrophenol at room temperature.     

Preparation of Fe3O4 nanoparticle enclosure hydroxylated multi-walled carbon nanotubes for the determination of aconitines in human serum samples

A magnetic carbon nanomaterial for Fe₃O₄ enclosure hydroxylated multi-walled carbon nanotubes (Fe₃O₄-EC-MWCNTs-OH) was prepared by the aggregating effect of Fe₃O₄ nanoparticle on MWCNTs-OH, and combined with high-performance liquid chromatography (HPLC)/diode array detection (DAD) to determine the aconitines (aconitine, hypaconitine and mesaconitine) in human serum samples. Compared with other extraction modes investigated in experiment, Fe₃O₄-EC-MWCNTs-OH sorbents showed a good affinity to target analytes. Some important parameters that could influence extraction efficiency of aconitines, including the extraction mode, amounts of Fe₃O₄-EC-MWCNTs-OH, pH of sample solution, extraction time, desorption solvent and desorption time, were optimized. Under optimal conditions, the recoveries of spiked serum samples were between 98.0% and 103.0%; relative standard deviations (RSDs) ranged from 0.9% to 6.2%. The correlation coefficients varied from 0.9996 to 0.9998. The limits of detection ranged from 3.1 ng mL⁻¹ to 4.1 ng mL⁻¹ at a signal-to-noise ratio of 3. The experimental results showed that the proposed method was feasible for the analysis of aconitines in serum samples.