Study of the Cycloaddition of CO2 with Styrene Oxide Over Six-Connected spn Topology MOFs (Zr,Hf) at Room Temperature

A series of MOFs with a 6-connected spn topology were synthesized (MOF-808-(Zr, Hf), PCN-777-(Zr, Hf), MOF-818-(Zr, Hf)). Through the in situ DRIFTS of NH₃ adsorption-desorption, we found that the activated catalyst mainly contains Lewis acid sites. The effects of different organic ligands on the Lewis acid of the Zr₆ cluster were analyzed by XPS and NH₃-TPD, and the relative Lewis acidity of the same metal was obtained: PCN-777>MOF-808>MOF-818. In the Py-FTIR results, we confirmed that MOF-818 has a higher acid site density. In the activity test, MOFs with mesoporous structure showed better catalytic activity under normal temperature and pressure. Among them, MOF-818 can still maintain a high degree of crystallinity after catalysis. Finally, we use density functional theory to propose the mechanism of the cycloaddition reaction of carbon dioxide and styrene oxide. The results show that the metal is coordinated with styrene oxide and halogens attack the β carbon of the epoxide.     

Synthesis, structure, and metalation of two new highly porous zirconium metal-organic frameworks

Three new metal-organic frameworks [MOF-525, Zr(6)O(4)(OH)(4)(TCPP-H(2))(3); MOF-535, Zr(6)O(4)(OH)(4)(XF)(3); MOF-545, Zr(6)O(8)(H(2)O)(8)(TCPP-H(2))(2), where porphyrin H(4)-TCPP-H(2) = (C(48)H(24)O(8)N(4)) and cruciform H(4)-XF = (C(42)O(8)H(22))] based on two new topologies, ftw and csq, have been synthesized and structurally characterized. MOF-525 and -535 are composed of Zr(6)O(4)(OH)(4) cuboctahedral units linked by either porphyrin (MOF-525) or cruciform (MOF-535). Another zirconium-containing unit, Zr(6)O(8)(H(2)O)(8), is linked by porphyrin to give the MOF-545 structure. The structure of MOF-525 was obtained by analysis of powder X-ray diffraction data. The structures of MOF-535 and -545 were resolved from synchrotron single-crystal data. MOF-525, -535, and -545 have Brunauer-Emmett-Teller surface areas of 2620, 1120, and 2260 m(2)/g, respectively. In addition to their large surface areas, both porphyrin-containing MOFs are exceptionally chemically stable, maintaining their structures under aqueous and organic conditions. MOF-525 and -545 were metalated with iron(III) and copper(II) to yield the metalated analogues without losing their high surface area and chemical stability.     

A collaborative CeO2@metal-organic framework nanosystem to endow scaffolds with photodynamic antibacterial effect

Antibacterial photodynamic therapy had attracted considerable attention in implant-associated infections treatment due to its high selectivity and no resistance. Actually, bacteria readily formed protective biofilm to cover themselves and impede the permeation of photosensitizers, severely impairing the therapeutic effect. Herein, a collaborative nanosystem was constructed by in-situ growing cerium oxide (CeO₂) nanoparticles on porphyrinic metal-organic framework PCN-224, and then mixed with poly-l-lactic acid (PLLA) powder to fabricate CeO₂@PCN-224/PLLA scaffold. In the nanosystem, CeO₂ was expected to disrupt the biofilm integrity by releasing Ce⁴⁺, exposing bacteria. Subsequently, PCN-224 could grab this opportunity to kill the bacteria by generating reactive oxygen species (ROS) under light irradiation, thereby achieving the desired antibacterial effect. Crystal violet staining and agarose gel electrophoresis results demonstrated that the bacterial biofilm was effectively eliminated by cleaving the extracellular DNA chains. Coomassie brilliant blue and acridine orange staining revealed that the generated ROS effectively killed bacteria by destroying their cell membrane, causing DNA hydrolysis and protein leakage. Furthermore, ROS could also weaken the antioxidant capacity of bacteria by consuming their glutathione, further accelerating bacterial death. As a consequence, the scaffolds presented a robust antibacterial rate of 97% against S. aureus. Collectively, this work provides a promising strategy for efficient implant-related infection treatment.     

Vancomycin-Functionalized Porphyrinic Metal-Organic Framework PCN-224 with Enhanced Antibacterial Activity against Staphylococcus Aureus

A vancomycin (Van) modification strategy on a porphyrinic metal-organic framework (MOF) PCN-224 is presented. The obtained Van-PCN-224 gives the combined advantages of porphyrinic MOF and Van with high photosensitive activity and excellent targeted antibacterial activity against Staphylococcus aureus. The features make Van-PCN-224 promising for antimicrobial therapy.     

Controllable Synthesis of Porphyrin‐Based 2D Lanthanide Metal–Organic Frameworks with Thickness‐ and Metal‐Node‐Dependent Photocatalytic Performance

Synthesizing 2D metal–organic frameworks (2D MOFs) in high yields and rational tailoring of the properties in a predictable manner for specific applications is extremely challenging. Now, a series of porphyrin‐based 2D lanthanide MOFs (Ln‐TCPP, Ln=Ce, Sm, Eu, Tb, Yb, TCPP=tetrakis(4‐carboxyphenyl) porphyrin) with different thickness were successfully prepared in a household microwave oven. The as‐prepared 2D Ln‐TCPP nanosheets showed thickness‐dependent photocatalytic performances towards photooxidation of 1,5‐dihydroxynaphthalene (1,5‐DHN) to synthesize juglone. Particularly, the Yb‐TCPP displayed outstanding photodynamic activity to generate O₂^? and ¹O₂. This work not only provides fundamental insights into structure designing and property tailoring of 2D MOFs nanosheets, but also pave a new way to improve the photocatalytic performance.     

Controllable Synthesis of Porphyrin-Based 2D Lanthanide Metal–Organic Frameworks with Thickness- and Metal-Node-Dependent Photocatalytic Performance

Synthesizing 2D metal–organic frameworks (2D MOFs) in high yields and rational tailoring of the properties in a predictable manner for specific applications is extremely challenging. Now, a series of porphyrin-based 2D lanthanide MOFs (Ln-TCPP, Ln=Ce, Sm, Eu, Tb, Yb, TCPP=tetrakis(4-carboxyphenyl) porphyrin) with different thickness were successfully prepared in a household microwave oven. The as-prepared 2D Ln-TCPP nanosheets showed thickness-dependent photocatalytic performances towards photooxidation of 1,5-dihydroxynaphthalene (1,5-DHN) to synthesize juglone. Particularly, the Yb-TCPP displayed outstanding photodynamic activity to generate O₂⁻ and ¹O₂. This work not only provides fundamental insights into structure designing and property tailoring of 2D MOFs nanosheets, but also pave a new way to improve the photocatalytic performance.     

Mechanistic Elucidations of Highly Dispersed Metalloporphyrin Metal-Organic Framework Catalysts for CO2 Electroreduction

Immobilization of porphyrin complexes into crystalline metal–organic frameworks (MOFs) enables high exposure of porphyrin active sites for CO₂ electroreduction. Herein, well-dispersed iron-porphyrin-based MOF (PCN-222(Fe)) on carbon-based electrodes revealed optimal turnover frequencies for CO₂ electroreduction to CO at 1 wt.% catalyst loading, beyond which the intrinsic catalyst activity declined due to CO₂ mass transport limitations. In situ Raman suggested that PCN-222(Fe) maintained its structure under electrochemical bias, permitting mechanistic investigations. These revealed a stepwise electron transfer-proton transfer mechanism for CO₂ electroreduction on PCN-222(Fe) electrodes, which followed a shift from a rate-limiting electron transfer to CO₂ mass transfer as the potential increased from −0.6 V to −1.0 V vs. RHE. Our results demonstrate how intrinsic catalytic investigations and in situ spectroscopy are needed to elucidate CO₂ electroreduction mechanisms on PCN-222(Fe) MOFs.     

Modulating the Acidic and Basic Site Concentration of Metal-Organic Framework Derivatives to Promote the Carbon Dioxide Epoxidation Reaction

Metal-organic framework (MOF) is an ideal precursor/template for porous carbon, and its active components are uniformly doped, which can be used in energy storage and catalytic conversion fields. Metal-organic framework PCN-224 with carboxylporphyrin as the ligand was synthesized, and then Zn²⁺ and Co²⁺ ions were coordinated in the center of the porphyrin ring by post-modification. Here, PCN-224−ZnCo with different ratios of bimetallic Zn²⁺/Co²⁺ ions were used as the precursor, and the metal-nitrogen-carbon(M−N−C) material of PCN-224−ZnCo-950 was obtained by pyrolyzing the precursor at 950 °C in Ar. Because Zn is easy to volatilize at 950 °C, the formed M−N−C materials can reflect different Co contents and different basic site concentrations. The formed material still maintains the original basic framework. With the increase of Zn²⁺/Co²⁺ ratio in precursor, the concentration of N-containing alkaline sites in pyrolysis products gradually increase. Compared with the precursor, PCN-224−ZnCo₁-950 with Zn²⁺/Co²⁺=1 : 1 has greatly improved basicity and suitable acidic/ alkaline site concentration. It can be efficiently used to carbon dioxide absorption and catalyze the cycloaddition of CO₂ with epoxide. More importantly, the current method of adjusting the acidic/basic sites in M−N−C materials through volatilization of volatile metals can provide an effective strategy for adjusting the catalysis of MOF derivatives with porphyrin structure.     

Ultrathin Two-Dimensional Metal–Organic Framework Nanosheets Based on a Halogen-Substituted Porphyrin Ligand: Synthesis and Catalytic Application in CO2 Reductive Amination

Ultrathin two-dimensional metal–organic framework nanosheets have emerged as a promising kind of heterogeneous catalysts. Herein, we report a series of 2D porphyrinic metal–organic framework nanosheets (X-PMOF, X=F, Cl, Br), which was prepared from the self-assembly of a halogen-based porphyrin ligand X-TCPP (X-TCPP=5-(4-halogenatedphenyl)-10,15,20-tris(4-carboxyphenyl)-porphyrin) and ZrCl₄ in the presence of trifluoroacetic acid as the modulating reagent. The framework of X-PMOF possessed the ftw topology as in MOF-525. The lamellar X-PMOF nanosheets with the thickness of down to 4.5 nm were assembled and aggregated into a flower-like morphology. With the introduction of iridium(III) atoms into the porphyrin rings, the resultant X-PMOF(Ir) nanosheets were prepared by a similar method. Catalytic results show that Br-PMOF(Ir) nanosheets were efficient for CO₂ reduction and aminolysis, giving rise to formamides in high yields under room temperature and atmospheric pressure, and can be recycled and reused for 3 runs. The total turnover number of Br-PMOF(Ir) after 3 runs was 1644 based on Ir. Mechanistic studies disclose that the high efficiency of Br-PMOF(Ir) nanosheets was ascribed to three factors, including the superior activation capability of iridium(III) porphyrin for Si−H bonds, more active sites on the external surfaces of Br-PMOF(Ir) nanosheets, and the defects caused by unsymmetrical porphyrin ligand that increased the framework's affinity towards CO₂.     

Rapid microwave-hydrothermal conversion of lignin model compounds to value-added products via catalytic oxidation using metal organic frameworks

Microwave irradiation is an effective method for faster heating to shorten reaction time of oxidative valorization of lignin. However, studies using microwave irradiation for lignin oxidation all employ homogeneous catalysis. Thus, this study aims to investigate heterogeneous catalytic oxidation of lignin under microwave irradiation. Especially, metal organic frameworks (MOFs) are adopted as transition metal-containing heterogeneous catalysts for lignin oxidation. In particularly, MOFs (MIL-101 (Cr), MIL-101 (Fe), UiO-66, HKUST-1, and MOF-801) are also prepared using microwave irradiation and used as for oxidative conversion of a model lignin compound, vanillyl alcohol (VAL), to the valuable products, vanillin (VN) and vanillic acid (VAC), using H₂O₂ as an oxidant. While the tested MOFs all exhibit catalytic activities for VAL conversion to VN/VAC, MIL-101 and MOF-801 appear to be relatively effective. Through investigating the effect of temperature, VAL conversion to VN/VAC is less favorable at higher temperature possibly due to degradation of H₂O₂ at high temperatures. While a higher dosage of H₂O₂ increases VAL conversion, the additionally added H₂O₂ seems to further oxidize VN to VAC instead of converting more VAL to VN. Through the EPR analyses, the mechanism of VAL conversion to VN/VAC may be attributed to both the OH-based and non-OH^? routes. The most effective MOF, MOF-801, also exhibited very similar catalytic activities over several cycles. The results indicate that MOFs can convert VAL to valuable products of VN and VAC within a very short time (10 min) under microwave irradiation. MOF-801 was also validated as a promising MOF for VAL conversion.     

Direct X‐ray Observation of Trapped CO2 in a Predesigned Porphyrinic Metal–Organic Framework

Metal–organic frameworks (MOFs) are emerging microporous materials that are promising for capture and sequestration of CO₂ due to their tailorable binding properties. However, it remains a grand challenge to pre‐design a MOF with a precise, multivalent binding environment at the molecular level to enhance CO₂ capture. Here, we report the design, synthesis, and direct X‐ray crystallographic observation of a porphyrinic MOF, UNLPF‐2, that contains CO₂‐specific single molecular traps. Assembled from an octatopic porphyrin ligand with [Co₂(COO)₄] paddlewheel clusters, UNLPF‐2 provides an appropriate distance between the coordinatively unsaturated metal centers, which serve as the ideal binding sites for in situ generated CO₂. The coordination of Co^II in the porphyrin macrocycle is crucial and responsible for the formation of the required topology to trap CO₂. By repeatedly releasing and recapturing CO₂, UNLPL‐2 also exhibits recyclability.     

Synthesis of Chiral MOF-74 Frameworks by Post-Synthetic Modification by Using an Amino Acid

The synthesis of chiral metal–organic frameworks (MOFs) is highly relevant for asymmetric heterogenous catalysis, yet very challenging. Chiral MOFs with MOF-74 topology were synthesised by using post-synthetic modification with proline. Vibrational circular dichroism studies demonstrate that proline is the source of chirality. The solvents used in the synthesis play a key role in tuning the loading of proline and its interaction with the MOF-74 framework. In N,N′-dimethylformamide, proline coordinates monodentate to the Zn²⁺ ions within the MOF-74 framework, whereas it is only weakly bound to the framework when using methanol as solvent. Introducing chirality within the MOF-74 framework also leads to the formation of defects, with both the organic linker and metal ions missing from the framework. The formation of defects combined with the coordination of DMF and proline within the framework leads to a pore blocking effect. This is confirmed by adsorption studies and testing of the chiral MOFs in the asymmetric aldol reaction between acetone and para-nitrobenzaldehyde.     

Robust chromophore-integrated MOFs as highly visible-white-light active and tunable size-selective photocatalysts towards benzothiazoles

Visible-light heterogeneous photocatalyst with high activity and selectivity is crucial for the development of organic transformations, but remains a formidable challenge. Herein, a simple and effective strategy was developed to integrate tetrazine moiety, a visible light active unit, into robust metal-organic frameworks (2D MOF-1(M), M = Co, Mn, Zn, and 3D MOF-2(Co)). MOF-1 series are isomorphous 2D porous frameworks, and MOF-2(Co) displays 3D porous framework. Interestingly, benefiting from the oxidative active species of O₂^•−, these MOFs all exhibit obviously highly enhanced photocatalytic activities toward the straightforward condensation of o-aminothiophenol and aromatic aldehydes at room temperature in EtOH under visible-white-light irradiation. Notably, compared to 3D MOF, the 2D layered MOF-1(Co) exhibited more excellent catalytic activity with a wide range of substrates possessing preeminent tolerance of steric hindrance. Most impressively, MOF-1(Co) can be recycled at least five times without significant loss of catalytic activity or crystallinity, exhibiting excellent stability and reusability. This study sheds light on the wide-ranging prospects of visible light active 2D MOFs as green photocatalysts for the preparation of fine chemicals     

Photodynamic effects induced by meso-tetrakis[4-(carboxymethyleneoxy)phenyl] porphyrin on isolated Sarcoma 180 ascites mitochondria

Using mitochondria isolated from Sarcoma 180 ascites tumour in Swiss mice as a model system, we have evaluated the ability of a novel porphyrin, meso-tetrakis[4-(carboxymethyleneoxy)phenyl]porphyrin (H₂T4CPP), to induce damage on photosensitization. Oxidative damage to mitochondria, one of the primary and crucial targets of the photodynamic effect, is assessed by measuring products of lipid peroxidation such as thiobarbituric acid reactive substances (TBARS) and lipid hydroperoxides (LOOH), besides the loss of activity of the mitochondrial marker enzyme succinate dehydrogenase (SDH). Analysis of product formation, the effect of deuteration and selective inhibition by scavengers of reactive oxygen species (ROS) show that the damage observed is due mainly to singlet oxygen (¹O₂) and to a minor extent to hydroxyl radicals (^•OH). The ¹O₂ generation and triplet lifetime of this porphyrin have also been estimated. Fluorescence spectroscopy, used to ascertain the binding of this porphyrin to the mitochondrial proteins, shows a rapid association within 0–2 h and a decline thereafter. Confocal microscopy reveals intracellular localisation of this porphyrin in cells in vitro. Our overall results suggest that the porphyrin H₂T4CPP, due to its ability to bind to mitochondrial protein components and to generate ROS upon photoexcitation, may have potential applications in photodynamic therapy.     

Specific Generation of Singlet Oxygen through the Russell Mechanism in Hypoxic Tumors and GSH Depletion by Cu‐TCPP Nanosheets for Cancer Therapy

The generation of singlet oxygen (¹O₂) during photodynamic therapy is limited by the precise cooperation of light, photosensitizer, and oxygen, and the therapeutic efficiency is restricted by the elevated glutathione (GSH) levels in cancer cells. Herein, we report that an ultrathin two‐dimensional metal–organic framework of Cu‐TCPP nanosheets (TCPP=tetrakis(4‐carboxyphenyl)porphyrin) can selectively generate ¹O₂ in a tumor microenvironment. This process is based on the peroxidation of the TCPP ligand by acidic H₂O₂ followed by reduction to peroxyl radicals under the action of the peroxidase‐like nanosheets and Cu²⁺, and their spontaneous recombination reaction by the Russell mechanism. In addition, the nanosheets can also deplete GSH. Consequently, the Cu‐TCPP nanosheets can selectively destroy tumor cells with high efficiency, constituting an attractive way to overcome current limitations of photodynamic therapy.     

Boosting CO2 electroreduction performance over fullerene-modified MOF-545-Co promoted by π–π interaction

Metal-organic frameworks (MOFs) have showed high promise in CO₂-electroreduction, yet their generally insufficient conductivity or low electron-transfer efficiency have largely restricted the wide-spread applications. Herein, fullerene molecules (i.e., C₆₀ and C₇₀) have been successfully introduced into the pore-channels of a Co-porphyrin based MOF through a facile strategy. Thus-obtained hybrid materials present higher electron-transfer ability, enhanced CO₂ adsorption-enthalpy and CO₂ electroreduction activity. Notably, the charge transfer resistance (R_ct) of C₆₀@MOF-545-Co is almost 5 times lower of than that of MOF-545-Co, as well as 1.5 times increased for the CO₂ adsorption enthalpy. As expect, the FE_CO of C₆₀@MOF-545-Co (97.0%) is largely higher than MOF-545-Co (70.2%), C₆₀@MOF-545 (19.4%), C₆₀ (11.5%) and physical mixture (70.3%) and presented as one of the best CO₂ electroreduction catalysts reported in H-cell system. The facile strategy would give rise to new insight into the exploration of powerful MOF-based hybrid materials in high-efficiency CO₂ electroreduction.     

MOF-1和Tb@MOF-1荧光探针的设计、 合成及对痕量Cr2O72-、 S2O82-离子的识别

采用5-((4-吡啶基)甲氧基)-异烟酸(H₂PLIA)、1,3,5-三(1-咪唑基)-苯(TIB)合成了金属有机骨架[Cd(PLIA)(TIB)]_n (MOF-1),MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1 易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1 和Tb@MOF-1 进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

MOF-1和Tb@MOF-1荧光探针的设计、合成及对痕量Cr2O72-、S2O82-离子的识别

采用5-（（4-吡啶基）甲氧基）-异烟酸（H₂PLIA）、1,3,5-三（1-咪唑基）-苯（TIB）合成了金属有机骨架[Cd （PLIA）（TIB）]_n （MOF-1）。MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1和Tb@MOF-1进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

2D Porphyrinic Metal-Organic Frameworks Featuring Rod-Shaped Secondary Building Units

Metal-organic frameworks (MOFs) encompass a rapidly expanding class of materials with diverse potential applications including gas storage, molecular separation, sensing and catalysis. So-called ‘rod MOFs’, which comprise infinitely extended 1D secondary building units (SBUs), represent an underexplored subclass of MOF. Further, porphyrins are considered privileged ligands for MOF synthesis due to their tunable redox and photophysical properties. In this study, the Cu^II complex of 5,15-bis(4-carboxyphenyl)-10,20-diphenylporphyrin (H₂L-Cu^II, where H₂ refers to the ligand’s carboxyl H atoms) is used to prepare two new 2D porphyrinic rod MOFs PROD-1 and PROD-2. Single-crystal X-ray analysis reveals that these frameworks feature 1D Mn^II- or Co^II-based rod-like SBUs that are coordinated by labile solvent molecules and photoactive porphyrin moieties. Both materials were characterised using infrared (IR) spectroscopy, powder X-ray diffraction (PXRD) spectroscopy and thermogravimetric analysis (TGA). The structural attributes of PROD-1 and PROD-2 render them promising materials for future photocatalytic investigations.     

Synthesis and Photocatalytic Properties of Titanium-Porphyrinic Aerogels

We present novel titanium-porphyrinic gels (TPGs) and titanium-porphyrinic aerogels (TPAs), in which porphyrinic ligand tetrakis(4-carboxyphenyl)porphyrin is coordinated to Ti-oxo clusters. These hierarchically porous TPAs, with micro-, meso-, and macropores and reactant-concentration-dependent Brunauer-Emmett-Teller surface areas of 407–738 m² g⁻¹, are prepared by CO₂ critical point drying of TPGs. Although the Ti⁴⁺ → Ti³⁺ photoreduction of TPAs is less efficient than that of crystalline microporous Ti-porphyrinic framework DGIST-1, prompt diffusion of O₂ and spin-trapping agents into the TPA pores causes the rapid generation of reactive oxygen species (ROS), as observed by EPR spectroscopy. When used as an ROS scavenger, large 1,3-diphenylisobenzofuran is degraded by the best-performing TPA 10 times faster than by DGIST-1, suggesting that the accessibility of molecules (reactants) to pores (reactive centers) strongly influences photocatalytic activity.