Sol‐Gel‐Process in the Ammono‐System – a Novel Access to Silicon Based Nitrides

Controlled coammonolysis of elementalkylamides in aprotic organic solvents at low temperatures have been shown to result in the formation of polyazanes. The synthetic procedure developed may be addressed as “sol‐gel‐route in the ammono system”. Pyrolysis of these novel polymer precursors gave access to multinary nitrides. For the model systems Si(NHMe)₄/B(NMe₂)₃, Si(NHMe)₄/Ti(NMe₂)₄, and Si(NHMe)₄/Ta(NMe₂)₅ polymeric boro‐, titano and tantalosilazanes were obtained. Pyrolysis in ammonia at 1000 °C yielded amorphous silicon boron nitride, silicon titanium nitride and silicon tantalum nitride powders; further heating of the nitride powders at 1500 °C in nitrogen atmosphere led to the formation of partly crystalline composites of α‐Si₃N₄ and amorphous silicon boron nitride for the Si/B/N system, a composite of finely dispersed TiN and amorphous silicon titanium nitride for the Si/Ti/N system, and crystalline TaN and amorphous silicon nitride for the Si/Ta/N system. Furthermore, the structure and pyrolysis chemistry of the polymeric intermediates, as well as the morphology of the pyrolysis products, were studied by NMR, MAS‐NMR, FT‐IR, DTA‐TG‐MS, XRD, SEM, EDX and elemental analyses.     

Präkeramische Polyazane über die Sol‐Gel‐Route im Ammonosystem und aus molekularen Einkomponentenvorläufern — ein Leistungsvergleich

Preceramic Polyazanes via Sol Gel Route in the Ammono System and via Molecular Single Source Precursors — a Comparison of Performance All steps of the sol gel process in the oxo system can be transferred analogously to the ammono system. For this purpose, element alkyl amides of titanium, zirconium, tantalum and boron, have been co‐ammonolised with silicon alkyl amides in aprotic solvents. Pyrolysis of the resulting polyazanes yields multinary nitridic ceramic powders. For the model systems Si(NHMe)₄/Ti(NMe₂)₄, Si(NHMe)₄/Zr(NMe₂)₄, Si(NHMe)₄/Ta(NMe₂)₅, and Si(NHMe)₄/B(NMe₂)₃ the corresponding polymeric polyboro‐, polytitano‐, polyzirkono‐ and polytantalosilazanes were synthesised. Pyrolysis in flowing ammonia at 1000°C results in ternary amorphous silicon nitrides; further heating in nitrogen leads to partly crystalline composites. The process of pyrolysis as well as the morphology and composition of the final pyrolysis products were analysed by means of NMR, MAS‐NMR, FT‐IR, DTA‐TG‐MS, XRD, SEM, EDX, and elemental analyses. In order to verify this new and convenient access to multinary nitride ceramics, single source precursors were synthesised and, via polymer intermediates, processed to ceramic powders. A specially developed reaction sequence is generally applicable to syntheses of single source precursors for various ternary metal silicon nitrides. Dilithiated silazanes of the type Si(NMe₂)₂(NLiR)₂, with R = t‐Butyl, SiMe₃, CH₃, synthesised and structurally characterised for the first time, are good silicon synthones. While forming nitrido bridges, those compounds react with e.g. two‐ or four valent transition metal chlorides, to silicon transition metal adducts. Actually, we have analysed the reaction of Si(NMe₂)₂(NLiR)₂ and TiCl₄, ZrCl₄, TaCl₅, CrCl₃, MnCl₂, and ZnCl₂, respectively. The adducts as formed were crosslinked with ammonia and pyrolysed. In the case of the chlorides of the 4.—6. group metals, amorphous ceramics were obtained. Treatment at higher temperatures results in composites of transition metal nitride and an amorphous matrix. MnSiN₂ and a new hexagonal modification of ZnSiN₂ were obtained in the systems Mn/ Si/ N and Zn/ Si/ N. Surprisingly, during the synthesis of ZnSiN₂, ZnCN₂ was obtained as a side product.     

Preparation of trimethylchlorosilane-modified acid vermiculites for removing diethyl phthalate from water

A hybrid organic-inorganic material based on vermiculite was prepared to remove diethyl phthalate (DEP) from aqueous solution. Natural vermiculite was activated with HCl to improve the specific surface area and was then modified by silanization using trimethylchlorosilane. Organovermiculite prepared by ion exchange with hexadecyl trimethylammonium bromide (HDTMAB) was also tested for comparison. The leaching of 2 mol L(-1) HCl at 80°C increased the specific surface area of vermiculite from 14.4 to 500.0m(2)g(-1), and the average pore-diameter was decreased from 7.90 nm to 2.75 nm. Fourier transform infrared spectroscopy (FTIR) spectra indicated that trimethysilyl groups were grafted covalently on the surface of acid vermiculites. The specific surface area of trimethylchlorosilane-modified acid vermiculites (TMAVs) (355.4 m(2) g(-1)) was much larger than that of organovermiculite (6.0 m(2) g(-1)). The isotherm adsorption experiments of DEP showed that TMAVs exhibited linear isotherms, suggesting that the uptake of DEP was controlled by partitioning mechanism. The maximal partition coefficient (K(d)) of TMAVs was 3.1 times higher than that of organovermiculite, implying that TMAVs had stronger organic affinity than organovermiculite. The results demonstrate that the adsorption capacity and mechanism of organoclays were controlled by the specific surface area and organic loading, whereas the length of alkyl chain of organic modifier was not the key factor.     

Microfluidic chip for high efficiency DNA extraction

A high efficiency DNA extraction microchip was designed to extract DNA from lysed cells using immobilized beads and the solution flowing back and forth. This chip was able to increase the extraction efficiency by 2-fold when there was no serum. When serum existed in the solution, the extraction efficiency of immobilized beads was 88-fold higher than that of free beads. The extraction efficiency of the microchip was tested under different conditions and numbers of E. coli cells. When the number of E. coli cells was between 10(6) and 10(8) in 25 microl of whole blood, the extraction efficiency using immobilized beads was only slightly higher than that using free beads (10(0) to 10(1) fold). When the number of E. coli cells was in the range 10(4) to 10(6) in 25 microl of whole blood, the extraction efficiency of immobilized beads was greater than that of the free beads (10(1) to 10(2) fold). When the number of E. coli cells was lower, in the range 10(3) to 10(4) in 25 microl of whole blood, the extraction efficiency of immobilized beads was much higher than that of the free beads (10(2) to 10(3) fold). This study indicated that DNA could be efficiently extracted even when the number of bacterial cells was smaller (10(5) to 10(3)). This microfluidic extraction chip could find potential applications in rare sample genomic study.     

聚苯醚磺酸锂与聚醋酸乙烯酯共混物的导电性能研究

为改善聚苯醚磺酸锂（SPPOLi）的导电性能，将聚酷酸乙烯酯（PVAc）与之共混，X-射线衍射分析表明，PVAc可降低SPPOLi凝聚结构的有序程度；发现共混后电导率有了较大提高，共混物的电导对温度的依赖关系不符合阿仑尼马斯方程；同时，共混物仍保持了单离子传导性．     

Mechanism of Oxygen Adsorption on Partially K Exchanged Na-A Type Zeolite

Accordingly, the observation of oxygen selectivity on Na-K-A would indicate that nitrogen has a greater steric hindrance at the window than does oxygen. Using single crystal X-ray diffraction (SCXD), it was confirmed that K at 8-member rings was relocated to 6-member rings and that the location of Na at 8-member rings became uncertain with calcination. It was also observed that Na-K-A was thermally more stable than Na-A. Using magic angle spin nuclear magnetic resonance (MAS-NMR), it was confirmed that Na at 8-member rings irreversibly changed location from a symmetric position to an asymmetric position with calcination.Using the atomic positions determined by SCXD, the mean square displacements (MSD) of oxygen and nitrogen inside the crystal of Na-A and Na-K-A were estimated by means of molecular dynamic simulation (MD). When temperature was decreased, the MSD of nitrogen was reduced to a greater extent than that of oxygen and the MSD of nitrogen inside Na-K-A was reduced by a greater margin than that inside Na-A.     

Probing metal binding in the 8-17 DNAzyme by TbIII luminescence spectroscopy

Metal-dependent cleavage activities of the 8-17 DNAzyme were found to be inhibited by Tb(III) ions, and the apparent inhibition constant in the presence of 100 microM of Zn(II) was measured to be 3.3+/-0.3 microM. The apparent inhibition constants increased linearly with increasing Zn(II) concentration, and the inhibition effect could be fully rescued with addition of active metal ions, indicating that Tb(III) is a competitive inhibitor and that the effect is completely reversible. The sensitized Tb(III) luminescence at 543 nm was dramatically enhanced when Tb(III) was added to the DNAzyme-substrate complex. With an inactive DNAzyme in which the GT wobble pair was replaced with a GC Watson-Crick base pair, the luminescence enhancement was slightly decreased. In addition, when the DNAzyme strand was replaced with a complete complementary strand to the substrate, no significant luminescence enhancement was observed. These observations suggest that Tb(III) may bind to an unpaired region of the DNAzyme, with the GT wobble pair playing a role. Luminescence lifetime measurements in D(2)O and H(2)O suggested that Tb(III) bound to DNAzyme is coordinated by 6.7+/-0.2 water molecules and two or three functional groups from the DNAzyme. Divalent metal ions competed for the Tb(III) binding site(s) in the order Co(II)>Zn(II)>Mn(II)>Pb(II)>Ca(II) approximately Mg(II). This order closely follows the order of DNAzyme activity, with the exception of Pb(II). These results indicate that Pb(II), the most active metal ion, competes for Tb(III) binding differently from other metal ions such as Zn(II), suggesting that Pb(II) may bind to a different site from that for the other metal ions including Zn(II) and Tb(III).     

靶向抗肿瘤药N-(N’-苄氧羰基甘氨酰脯氨酰)丙卡巴肼(Z-GP-Pcb)的环境友好合成及其透过血脑屏障活性评价

利用靶向策略设计了抗肿瘤药物N-(N’-苄氧羰基甘氨酰脯氨酰)丙卡巴肼(Z-GP-Pcb),发展了3步法合成丙卡巴肼(Pcb).首先以4-甲基苯甲醛为原料,经二溴异氰脲酸(DBI)转化为N-异丙基-4-甲基苯酰胺.该化合物经2-碘酰基苯甲酸(IBX)直接氧化为N-异丙基-4-甲酰基苯酰胺,随后还原胺化得Pcb.最后与N-苄氧羰基甘氨酰脯氨酸缩合得Z-GP-Pcb,总收率49.9%.另外,本研究还建立了体外平行人造膜渗透测血脑屏障(PAMPA-BBB)方法评价Z-GP-Pcb透过血脑屏障(BBB)活性,发现其透膜常数(Pe)为(19.22±4.25)×10^-6cm·s^-1,大于母药Pcb[(11.14±1.34))×10^-6cm·s^-1],具有较高的透过BBB活性.     

硅胶负载氯掺杂二氧化钛光催化剂的水热制备与光催化活性评价

利用水热法, 以硅胶为载体, 以Ti(SO4)2为钛源, NaCl为氯源制备了具有良好性能的硅胶负载氯掺杂二氧化钛(CTS)光催化剂, 考察了氯投加量、焙烧温度及钛硅比对光催化活性的影响. 结果表明, 氯投加量为15% (nCl/nTi)、钛硅物质的量比为3:1、焙烧温度为750 ℃时制备的CTS具有最佳的光催化活性, 其比表面积为60.8 m2·g-1. CTS中的硅胶除了作为载体, 还起到了促进锐钛矿二氧化钛的生成并抑制其向金红石相转变的作用; 氯掺杂二氧化钛(CT)经硅胶负载后, 其表面孔结构发生了变化, 并且热稳定性增加. 苯酚降解实验表明, 与CT相比, CTS以0.7740 g·g-1的二氧化钛含量具有更高的光催化活性.     

多面体低聚八硝基苯基硅倍半氧烷纯度分析

使用高效液相色谱-电喷雾四级杆飞行时间质谱(HPLC-ESI-Q-TOF MS)联用技术对八硝基苯基硅倍半氧烷(ONPS)纯度进行分析, 从而判定ONPS产物峰及杂质峰的位置, 根据ONPS峰和杂质峰的面积比计算ONPS的纯度. 通过改变HPLC的洗脱梯度和测试时间, 将ONPS产物中的杂质峰完全分开, 测得硝基苯基硅倍半氧烷(NPS)质量分数为97.55%, 其中ONPS的纯度约为92.42%, 产物中含有九硝基八苯基硅倍半氧烷(9-NPS)约5.13%, 其它杂质含量约为2.45%. 通过对ONPS高效液相色谱图峰形和同分异构体极性情况分析, 进一步证明ONPS分子中硝基取代发生于对位和间位. 使用超高效液相色谱(UPLC)对ONPS进行分析, 以更高的分离效率验证了HPLC的结果. 该方法可作为ONPS纯度的分析方法.     

ss—DNA在纳米金上固载和杂化的化学传感研究

将２－氨乙基硫醇（ＡＥＴ）固载到玻碳电极（ＧＣＥ）表面,进而化学吸附纳米金（ＮＧ）,并在纳米金上固载ss－ＤＮＡ得到ss－ＤＮＡ／ＮＧ／ＡＥＴ／ＧＣＥ,以Ｃo（ｂｐ ｙ）３＾３＋,但用pＨ７．０的磷酸缓冲液浸泡可基本上避免这种变性,并时显提高杂化反应的识别能力。结合在ds－ＤＮＡ／ＮＧ／ＡＥＴ／ＧＣＥ上的Ｃo（bpy）３＾３＋的峰电流与扫速的线性关系可保持到８０mＶ／s,与电沉积法固载纲米金相比较,本电极更稳定     

ZSM-5沸石中V的还原性能

用TPR并结合XRD、ESR和XPS等测试手段研究了V(Ⅳ,Ⅴ)-ZSM-5、V₂O₅-/ZSM-5(分别用浸渍法和机械混合法制备)及V₂O₅样品的还原性能,获得了还原过程中物相及钒离子价态变化的信息,发现分散在分子筛表面上的V(Ⅴ)还原温度比V₂O₅低,而位于ZSM-5骨架上的V(Ⅴ)却比V₂O₅更难还原。高于1200K骨架V才开始还原;高于1370K,V-ZSM-5分子筛开始解体并转变成方英石结构,从骨架中析出的V完全还原成低价态。     

Ru修饰前后Pd(111)面的性质及对糠醛吸附的比较研究

采用密度泛函理论研究了Pd(111)面和Ru-Pd(111)面的性质及对糠醛的吸附.原子尺寸因素、相对键长、形成能及d带中心等计算结果表明,Ru-Pd(111)面比Pd(111)面稳定且活性强,Ru的修饰优化了Pd(111)面的几何构型.糠醛在Pd(111)面及Ru-Pd(111)面的初始吸附位分别为P(top-bridge)位及P(Pd-fcc-Ru-fcc)位时,吸附能最大,吸附构型最稳定.由电荷布局和差分电荷密度可得,糠醛在Ru-Pd(111)面上电荷转移数更多,相互作用更强烈,因此吸附能更大.分析态密度可知,产生吸附的主要原因是位于-7.34 eV处至费米能级处的p,d轨道杂化.吸附于Ru-Pd(111)面后糠醛分子的p轨道向低能级偏移程度更明显,使Ru改性后的Pd催化剂具有更好的催化活性.     

碳化钨在对硝基苯酚电还原过程中的电催化行为

以碳化钨(WC)粉末为电催化材料制成了碳化钨粉末微电极(WC-PME). 采用循环伏安和线性扫描等方法研究了酸性溶液中对硝基苯酚(PNP)在WC-PME上的电还原行为. 研究表明, 在相同测试条件下, PNP在WC-PME上电还原的电位比Cu-Hg微电极正得多；WC-PME对氢具有较强的吸附能力, 有利于有机物的电还原反应. PNP在WC-PME上和Pt微电极上的还原电位相近, 但在WC-PME上的峰电流比在Pt微电极上高5倍多, 这主要与WC粉末的结构形貌有关.     

Preparation of nanosilica-immobilized antioxidant and the antioxidation effects in polypropylene

To improve the dispersion of silica in polypropylene（PP） matrix and to avoid physical loss of the antioxidants, nanosilica with dendric polyamidoamines on the surface（SG-PAMAM） was synthesized by using divergent method. Then nanosilica-immobilized antioxidant（SG-PAMAM-AO） was prepared by grafting 2,6-di-tert-butyl-4-aminophenol which was derived from 2,6-di-tert-butyl-4-phenol（AO）. The SG-PAMAM-AO was added into PP by melt mixing to study the aging property. The oxidation induction time of PP/SG-PAMAM-AO and PP/AO compounds was measured. It was found that the antioxidant property of the SG-PAMAM-AO was superior to that of AO. According to the changes of carbonyl absorption before and after photo-thermal aging, the photo-thermal oxidative stability of PP/SG-PAMAM-AO was much higher than that of PP, PP/SG-PAMAM and PP/AO.     

聚2,5-呋喃二甲酸乙二醇酯的合成与表征

以2,5-呋喃二甲酸和乙二醇为原料,草酸亚锡为催化剂,通过直接酯化法合成了线性高分子量聚2,5-呋喃二甲酸乙二醇酯(PEF).运用红外光谱(FTIR)和核磁共振氢谱(1H-NMR)表征了该聚酯的结构;由乌氏黏度计法和凝胶渗透色谱(GPC)建立了该聚酯在一种混合溶剂体系中特性黏数和重均分子量的关系:[η]=2.82×10-6Mw0.99dL/g,25℃,苯酚-四氯乙烷(1∶1,W/W);示差扫描量热法(DSC)和热失重分析(TGA)测定了该聚酯的热转变性能,结果表明该聚酯玻璃化转变温度为84℃,熔点为211℃,起始热分解温度高于370℃,具有良好的热稳定性;运用旋转流变仪研究了PEF的流变性能,结果表明,PEF熔体属于假塑性流体,随相对分子量的减小和温度升高,其非牛顿指数增大,在高于PEF熔点20～40℃,剪切速率为2.17×10-2～1.14×102s-1时,PEF的非牛顿指数为0.85左右.     

Study of the surface ionization detector for gas chromatography

The structure of the surface ionization detector (SID) and the operation parameters of GC-SID were investigated to reduce peak tailing and to enhance sensitivity. The performances of the GC-SID, including its repeatability, linearity, sensitivity, selectivity, and tolerance towards water vapor, were evaluated systematically. Compared with nitrogen-phosphorus detector (NPD), the SID was able to detect fg level triethylamine, and selectively respond to alkylamines, some anilines, and some nitrogen heterocyclic compounds. Among alkylamines, the SID sensitivity to diisobutylamine was rather small. Even so, it was also still 10 times higher than that on NPD. The SID selectivity, defined as the sensitivity ratio between triethylamine and various tested non-nitrogen compounds, was higher than 10(6). It was found that the SID is highly tolerant towards water vapor, allowing direct injection of water sample. Finally, the GC-SID was applied to directly measure trace amines in headspace gases of rotted meat and trace simazine in tap water. The SID sensitivity to simazine was proven to be 5 times higher than that on flame ionization detector (FID). This study suggests that the SID is a promising GC detector.     

量子点标记链霉亲和素及其生物活性检测

选用无机盐为前驱体,在水相中合成CdTe量子点,并用此量子点标记链霉亲和素,通过SephadexG-100层析分离纯化量子点标记的链霉亲和素,采用磁颗粒标记的链霉亲和素与量子点标记的链霉亲和素竞争结合辣根过氧化酶标记的生物素,即酶联免疫竞争抑制分析法检测链霉亲和素标记量子点后的生物活性,计算约70.3%的链霉亲和素标记到量子点上,且具有生物活性。每毫克量子点大约可偶联0.14 mg的链霉亲和素。采用荧光光谱研究量子点标记前后的荧光变化,标记后量子点的最大发射波长蓝移了8 nm,而发射光谱的半峰宽基本不变,说明量子点与链霉亲和素结合后粒子没有团聚,分散性好。     

微透析高效液相色谱法研究金属酶与小分子的相互作用

将微透析（microdialysis)高效液相色谱法（high performance liquid chromatography,HPLC)联用技术应用于定量研究超氧化物歧化酶（superoxide dismutase)与组氨酸和组氨酸－金属离子配合物的相互作用。实验结果表明： Cu2Zn2SOD酶不仅与组氨酸，而且还可以与组氨酸－Co(Ⅱ）和组氨酸－Ni(Ⅱ)相互 作用，Cu2Zn2SOD酶中的部分Cu(Ⅱ)和Zn(Ⅱ)被诱导和置换出来，并相应地影响了 酶的活性；组氨酸－金属离子配合物的作用比组氨酸强，酶活性降低也更明显；酶 中结合的外来金属离子的量比从酶上被诱导和顶替下来的金属离子的量要少，说明 在溶液中有脱辅基酶的存在。     

聚乙烯醇多孔膜的制备及其对二氧化钛的负载研究

以聚乙烯醇(PVA)为聚合物基体,戊二醛为交联剂,乙酸为催化剂,聚乙二醇6000(PEG-6000)为致孔剂,制备了聚乙烯醇多孔膜(porous PVA films,PPF多孔膜);再将实验室自制的二氧化钛溶胶(TiO_2)负载于PPF多孔膜上,制备得到聚乙烯醇原位负载二氧化钛功能薄膜(PPF-TiO_2)。采用红外光谱、扫描电镜、分光光度计等分别考察了PPF多孔膜的交联条件、负载前后PPF-TiO_2功能薄膜的形貌,PPF-TiO_2功能薄膜对甲基橙的去除率。研究结果表明,为制备适宜交联度及孔径的PPF多孔膜,戊二醛浓度为5%(wt),PEG-6000用量为PVA用量的0.6倍为宜;PPF多孔膜对TiO_2负载的温度为40℃,负载时间为2h能够获得负载量为43%的PPF-TiO_2功能薄膜。此外,PPF-TiO_2功能薄膜比商品化TiO_2对甲基橙的降解率(100mg/L)更快,且具有可循环使用的优势。