Strong Electronic Effects in the cis‐Selective Asymmetric Cyclopropanation of Olefins Catalyzed by [RuCl(PNNP)]+

The cationic [RuCl(PNNP)]⁺ catalysts containing tetradentate ligands with a P₂N₂ donor set (PNNP) show strong electronic effects in the cyclopropanation of para‐substituted styrenes. The reactivity trend confirms that the carbene transfer to the olefin has electrophilic character. Linear free‐energy relationships are observed for the relative reactivity, the cis/trans selectivity, and for the enantioselectivity (of the cis‐cyclopropane). The linear correlation between log (k_X/k_H) and σ shows a large value of ρ (−2.4), which is indicative of significant charge buildup in the transition state of the carbene transfer to the olefin. All the relevant parameters (reactivity, diastereoselectivity, and enantioselectivity) increase with the increasing electron density at the C=C bond. To define the scope of the [RuCl(PNNP)]⁺ catalysts, 1‐ and 2‐substituted styrenes, and oct‐1‐ene were also investigated.     

超支化铬系催化剂的合成及乙烯齐聚性能研究

以正辛胺和十二胺为原料,分别制备了两种超支化PNP配体,通过引入金属铬活性位点的方法合成了具有不同烷基链长度的超支化PNP铬系催化剂.采用红外光谱(IR)、核磁共振磷谱(~(31)P-NMR)、核磁共振氢谱(~1H-NMR)、紫外光谱(UV)和质谱(MS)等表征方法证明合成催化剂的结构与理论结构预测相符.详细考察了催化剂用量、溶剂种类、反应条件以及配合物结构对乙烯齐聚性能的影响.实验结果显示,超支化PNP铬系催化剂在甲苯作溶剂,甲基铝氧烷(MAO)做助催化剂时表现出良好的催化乙烯齐聚性能,产物主要为低碳烯烃.在最佳条件下,催化活性最高可达到1.69×10~5 g·(mol Cr·h)~(-1),己烯和辛烯的选择性为43.3%以上.相同聚合条件下,其催化活性随着端基烷基链长度的增加而下降.     

RuII,OsII, and IrIII Complexes with Chelating Pyridyl–Mesoionic Carbene Ligands: Structural Characterization and Applications in Transfer Hydrogenation Catalysis

Chelating ligands with one pyridine donor and one mesoionic carbene donor are fast establishing themselves as privileged ligands in homogeneous catalysis. The synthesis of several new Ir^III–Cp*‐ and Os^II–Cym complexes (Cp*=pentamethylcyclopentadienyl, Cym=p‐cymene=4‐isopropyl‐toluene) derived from chelating pyridyltriazolylidenes where the additional pyridine donor was incorporated via the azide part of the triazole is presented. Furthermore, different 4‐substituted phenylacetylene building blocks have been used to introduce electronic fine‐tuning in the ligands. The ligands thus can be generally described as 4‐(4‐R‐phenyl)‐3‐methyl‐1‐(pyridin‐2‐yl)‐1H‐1,2,3‐triazol‐5‐ylidene (with R being H (L¹), Me (L²), OMe (L³), CN (L⁴), CF₃ (L⁵), Br (L⁶) or NO₂ (L⁷)). The corresponding complexes (Ir‐ 1 to Ir‐ 7 and Os‐ 1 to Os‐ 7 ) were characterized by standard spectroscopic methods, and the expected three‐legged, piano‐stool type coordination was unambiguously confirmed by X‐ray diffraction analysis of selected compounds. Together with Ru^II analogues previously reported by us, a total of 21 complexes were tested as (pre)catalysts for the transfer hydrogenation of carbonyl groups, showing a remarkable reactivity even at very low catalyst loadings. The electronic effects of the ligands as well as different substrates were investigated. Some mechanistic elucidations are also presented.     

Exploring the Palladium? and Platinum?Bis(pyridine) Complex Motif by NMR Spectroscopy,X‐ray Crystallography, (Tandem) Mass Spectrometry,and Isothermal Titration Calorimetry: Do Substituent Effects Follow Chemical Intuition?

A series of ten palladium? bis(pyridine) complexes, as well as their corresponding platinum complexes, have been synthesized. The pyridine ligands in each series carried different σ‐donor and/or π‐acceptor/donor substituents at the para‐position of their pyridine rings. These complexes were analysed by NMR spectroscopy, X‐ray crystallography, (tandem) MS, and isothermal titration calorimetry (ITC) to validate whether these methods allowed us to obtain a concise and systematic picture of the relative and absolute thermodynamic stabilities of the complexes, as determined by the electronic effects of the substituents. Interestingly, the NMR spectroscopic data hardly correlated with the expected substituent effects but the heteronuclear platinum? phosphorus coupling constants did. Crystallographic data were found to be blurred by packing effects. Instead, tandem MS and ITC data were in line with each other and followed the expected trends.     

Transition-Metal Complexes with Nano-Sized Phosphine and Pyridine Ligands-Catalysis,Fluxional Behavior and Molecular Recognition

Nano-sized phosphine and pyridine ligands having tetraphenylphenyl-, m-terphenyl-, poly(benzylether) moieties were synthesized. These ligands showed a remarkable effect on homogeneous transition metal catalyzed reactions. Pd(II) complexes with tetraphenylphenyl substituted pyridine ligands show high catalytic activities for oxidation of ketones suppressing Pd black formation and maintains the catalytic activity for a long time. Rh(I) complex catalysts with m-terphenyl substituted phosphine ligands showed remarkable rate acceleration in the hydrosilylation of ketones. In addition, several phosphinocalixarene ligands were synthesized and their coordination studies with Pd(II), Pt(II), Ru(II), Ir(I), and Rh(I) metals were documented. Ir(I) and Rh(I) cationic complexes with a 1,3,5-triphosphinocalix[6]arene ligand showed dynamic behavior with size-selective molecular recognition.     

Synthesis and application of chromium complexes bearing hyperbranched PNP ligands in the ethylene oligomerization

Series of hyperbranched PNP ligands ( L1 – L3 ) were prepared using three low-generation hyperbranched molecules with the same branching chains and functional groups but different alkyl chain length as backbones in a mixed solvent of acetonitrile and dichloromethane. The chromium complexes ( Cr1 – Cr3 ) were obtained by reacting with CrCl₃(THF)₃ and the corresponding ligands ( L1 – L3 ). Both L1 – L3 and Cr1 – Cr3 were characterized by elemental analysis, Fourier transform infrared and electrospray ionization–mass spectrometry as well as ¹H nuclear magnetic resonance (NMR) and ³¹P NMR measurements in the case of the ligands. When activated with different aluminum co-catalysts, all three chromium complexes were able to catalyze the ethylene oligomerization, but the products of the ethylene oligomerization were mainly dependent on ethylene pressure, co-catalyst and ligand backbone. Upon activation with methylaluminoxane, the catalytic activity and the selectivity of C8 olefin increased with increasing of ethylene pressure for Cr1 , the catalytic activity was 13.83 × 10⁵ g·(mol Cr·h)⁻¹ and the main product was C8 olefin (50.68%) at the ethylene pressure of 4.0 MPa. When activated with diethylaluminium chloride, ethylaluminium dichloride and ethylaluminum sesquichloride, Cr1 showed the lower catalytic activity and the higher selectivity of C4 olefin in toluene. An increase in the length of alkyl chain in the hyperbranched PNP ligand backbone caused a decrease in the catalytic activity and an increase in the selectivity of C8 + olefin. The PNP chromium complexes exhibited higher selectivity for higher carbon number olefins compared with the dendritic PNP chromium complex ( Cr5 ).     

Highly Active and Robust Metalloporphyrin Catalysts for the Synthesis of Cyclic Carbonates from a Broad Range of Epoxides and Carbon Dioxide

Bifunctional metalloporphyrins with quaternary ammonium bromides (nucleophiles) at the meta, para, or ortho positions of meso‐phenyl groups were synthesized as catalysts for the formation of cyclic carbonates from epoxides and carbon dioxide under solvent‐free conditions. The meta‐substituted catalysts exhibited high catalytic performance, whereas the para‐ and ortho‐substituted catalysts showed moderate and low activity, respectively. DFT calculations revealed the origin of the advantage of the meta‐substituted catalyst, which could use the flexible quaternary ammonium cation at the meta position to stabilize various anionic species generated during catalysis. A zinc(II) porphyrin with eight nucleophiles at the meta positions showed very high catalytic activity (turnover number (TON)=240 000 at 120 °C, turnover frequency (TOF)=31 500 h^?1 at 170 °C) at an initial CO₂ pressure of 1.7 MPa; catalyzed the reaction even at atmospheric CO₂ pressure (balloon) at ambient temperature (20 °C); and was applicable to a broad range of substrates, including terminal and internal epoxides.     

Selective ethylene oligomerization with in‐situ‐generated chromium catalysts supported by trifluoromethyl‐containing ligands

A series of pyrrole‐containing diarylphosphine and diarylphosphine oxide ligands were prepared. The catalytic activity of the corresponding in‐situ‐generated chromium catalysts was investigated during selective ethylene oligomerization reactions. Variations in the ligand system were introduced by modifying the diarylphosphine and pyrrole moieties that affect the steric and electronic properties. Minor changes in the ligand structure and the composition of activators significantly changed the catalytic activity, selectivity toward linear alpha‐olefins (LAO) versus polyethylene (PE), and the distribution of oligomeric products. The presence of trifluoromethyl groups on the diphenyl rings in ligand 3 promoted oxidation to form the corresponding phosphine oxide structure, 3o , which dramatically enhanced the catalytic activity of ethylene trimerization. The in‐situ‐generated chromium complex based on 3o activated by DMAO (dry methylaluminoxane)/TIBA (triisobutylaluminum) was used to achieve activity of about 1250 g (mmol of Cr)⁻¹ h⁻¹ with 98.5 mol % 1‐hexene, along with a negligible amount of PE side product. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 444–450     

Sterically and Electronically Flexible Pyridylidene Amine Dinitrogen Ligands at Palladium: Hemilabile cis/trans Coordination and Application in Dehydrogenation Catalysis

Ligand design is crucial for the development of new catalysts and materials with new properties. Herein, the synthesis and unique hemilabile coordination properties of new bis-pyridylidene amine (bis-PYE) ligands to palladium, and preliminary catalytic activity of these complexes in formic acid dehydrogenation are described. The synthetic pathway to form cationic complexes [Pd(bis-PYE)Cl(L)]X with a cis-coordinated N,N-bidentate bis-PYE ligand is flexible and provides access to a diversity of Pd^II complexes with different ancillary ligands (L=pyridine, DMAP, PPh₃, Cl, P(OMe)₃). The ¹H NMR chemical shift of the trans-positioned PYE N−CH₃ unit is identified as a convenient and diagnostic handle to probe the donor properties of these ancillary ligands and demonstrates the electronic flexibility of the PYE ligand sites. In the presence of a base, the originally cis-coordinated bis-PYE ligand adopts a N,N,N-tridentate coordination mode with the two PYE units in mutual trans position. This cis–trans isomerization is reverted in presence of an acid, demonstrating a unique structural and steric flexibility of the bis-PYE ligand at palladium in addition to its electronic adaptability. The palladium complexes are active in formic acid dehydrogenation to H₂ and CO₂. The catalytic performance is directly dependent on the ligand bonding mode, the nature of the ancillary ligand, the counteranion, and additives. The most active system features a bidentate bis-PYE ligand, PPh₃ as ancillary ligand and accomplishes turnover frequencies up to 525 h⁻¹ in the first hour and turnover numbers of nearly 1000, which is the highest activity reported for palladium-based catalysts to date.     

Theoretical evaluation of ethylene insertion into chromium alkyl bonds of Cp-donor-based olefin polymerization catalysts

We propose routes for the catalytic cycle and possible termination reactions for the polymerization of ethylene with cationic chromium complexes of the type [CpCr(L)R](+) which contain donor ligands with phosphorus or nitrogen (L = PR(3) or NR(3)). We confirm the rate-determining character of the insertion of ethylene into the chromium-alkyl bond. Contrary to the situation with late transition metals, the resulting agostic isomers will readily isomerize. The termination of the polymerization reaction by β-hydrogen elimination to the chromium center and subsequent dissociation of the resulting olefin is found to require about 25 kcal/mol and to be thermodynamically much less feasible than the alternative termination process by β-hydrogen transfer to a monomer. The latter process involves spin change; two minimum-energy crossing points as well as further transition states and intermediates have been identified. Our calculations predict that adduct formation with the polymerization additive 9-BBN should be feasible both from a Cp-quinoline-based chromium catalyst and a zirconocene catalyst. However, only the latter undergoes exergonic chain transfer, which is in accordance with the experimentally observed formation of ultrahigh M(W) polyethylene when using 9-BBN as polymerization additive in combination with Cr catalysts. For the first time, quantum dynamics simulations of such open-shell systems have been performed, which give a lifetime of the Cr-alkyl complex with regard to ethylene insertion of only 500 fs. The simulations indicate that the dissociation of ethylene from the chromium center should be relatively insignificant compared to migratory insertion.     

有机金属烯烃配位聚合催化剂

有机金属烯烃配位聚合催化剂具有高催化活性和良好的分子剪裁性,通过调节催化剂的微结构,如配体的取代基?配位原子以及配位中心的电子与立体环境等,可以在分子层次上实现烯烃聚合物的分子设计与组装;实现聚合物物理性质的调控,从而得到各种具有新型功能和立体异构的聚合物。本文综述了金属烯烃聚合催化剂研究进展,并展望该领域的发展趋势。     

Fluorinated α-Diimine Nickel Mediated Ethylene (Co)Polymerization

Fluorine substituents in transition metal catalysts are of great importance in olefin polymerization catalysis; however, the comprehensive effect of fluorine substituents is elusive in seminal late transition metal α-diimine catalytic system. In this contribution, fluorine substituents at various positions (ortho-, meta-, and para-F) and with different numbers (F_n; n=0, 1, 2, 3, 5) were installed into the well-defined N-terphenyl amine and thus were studied for the first time in the nickel α-diimine promoted ethylene polymerization and copolymerization with polar monomers. The position of the fluorine substituent was particularly crucial in these polymerization reactions in terms of catalytic activity, polymer molecular weight, branching density, and incorporation of polar monomer, and thus a picture on the fluorine effect was given. As a notable result, the ortho-F substituted α-diimine nickel catalyst produced highly linear polyethylenes with an extremely high molecular weight (M_w=8703 kDa) and a significantly low degree of branching of 1.4/1000 C; however, the meta-F and/or para-F substituted α-diimine nickel catalysts generated highly branched (up to 80.2/1000 C) polyethylenes with significantly low molecular weights (M_w=20-50 kDa).     

Highly Active Multidentate Ligand‐Based Alkyne Metathesis Catalysts

Alkyne metathesis catalysts composed of molybdenum(VI) propylidyne and multidentate tris(2‐hydroxylbenzyl)methane ligands have been developed, which exhibit excellent stability (remains active in solution for months at room temperature), high activity, and broad functional‐group tolerance. The homodimerization and cyclooligomerization of monopropynyl or dipropynyl substrates, including challenging heterocycle substrates (e.g., pyridine), proceed efficiently at 40–55 °C in a closed system. The ligand structure and catalytic activity relationship has been investigated, which shows that the ortho groups of the multidentate phenol ligands are critical to the stability and activity of such a catalyst system.     

One-Pot Cooperation of Single-Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization-Hydrosilylation Process

Realizing the full potential of oxide-supported single-atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one-pot combination of Ru₁/CeO₂ and Rh₁/CeO₂ SACs enables a highly selective olefin isomerization-hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double-bond migration and anti-Markovnikov α-olefin hydrosilylation, respectively. First-principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single-pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio-selectivity (>95 %) even from industrially-relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide-supported single-atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.     

Structural Control of Cell Permeability with Highly Emissive Europium(III) Complexes Permits Different Microscopy Applications

Four anionic europium complexes are described based on triazacyclononane tris‐carboxylate or phosphinate ligands. In each case, the three sensitising chromophores comprise a substituted aryl–alkynyl pyridine group, with complex brightness in water falling in the range 4 to 23 mM ^?1 cm^?1. para‐Substitution of the aryl ring with carboxymethyl groups gives complexes that are taken into cells, stain the lysosomes selectively and unexpectedly permit lifetime measurements of lysosomal pH. In contrast, the introduction of sulfonate groups inhibits cell uptake enabling the Eu complex to be used as an extracellular donor for FRET applications at the membrane surface. Using time‐gated FRET microscopy, the cell membrane structure was highlighted, in which Cell Mask Deep Red was used as a membrane‐ localized FRET acceptor.     

Vanadium(V) complexes containing tetradentate amine trihydroxy ligands as catalysts for copolymerization of cyclic olefins

A series of vanadium(V) complexes bearing tetradentate amine trihydroxy ligands [NOOO], which differ in the steric and electronic properties, have been synthesized and characterized. Single crystal X‐ray analysis showed that these complexes are five or six coordinated around the vanadium center in the solid state. Their coordination geometries are octahedral or trigonal bipyramidal. In the presence of Et₂AlCl, these complexes have been investigated as the efficient catalysts for ethylene polymerization and ethylene/norbornene copolymerization at elevated reaction temperature and produced the polymers with unimodal molecular weight distributions (MWDs), indicating the single site behaviors of these catalysts. Both the steric hindrance and electronic effect of the groups on the tetradentate ligands directly influenced catalytic activity and the molecular weights of the resultant (co)polymers. Other reaction parameters that influenced the polymerization behavior, such as reaction temperature, ethylene pressure, and comonomer concentration, are also examined in detail. Furthermore, high catalytic activities of up to 3.30 kg polymer/mmol_V·h were also observed when these complexes were applied to catalyze the copolymerization of ethylene and 5‐norbornene‐2‐methanol, producing the high‐molecular‐weight copolymers (M_w = 157–400 kg/mol) with unimodal MWDs (M_w/M_n = 2.5–3.0) and high polar comonomer incorporations (up to 12.3 mol %). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1122–1132, 2010     

Accessible microwave synthetized conjugated poly(azomethine‐pyridine) network and its metal complexes for CO2 conversion

A conjugated crosslinked polyazomethine containing pyridine units ( PAM‐Py ) was prepared from two commercial monomers, 2,6‐diaminopyridine and isophthaldehyde, under microwave heating in only 30 min. Taking advantage of its thermal and chemical stability, porosity (S_BET of 192 m²/g), insolubility, and ability to coordinate metals through the pyridine or imine N atoms, ruthenium‐, aluminum‐, iron‐, and cobalt‐poly(azomethine‐pyridine) complexes ( PAM‐PyM ) were prepared. The resulting metal polymers were evaluated as heterogeneous catalysts for the cycloaddition of CO₂ to epoxides yielding selectively the corresponding cyclic carbonates. All heterogeneous catalysts showed an extraordinary effectiveness with very high yields of epoxide conversion (up to 98%), turnover numbers up to 7425, and were reused at least five times without loss in catalytic activity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1946–1952     

One‐Pot Cooperation of Single‐Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization‐Hydrosilylation Process

Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru₁/CeO₂ and Rh₁/CeO₂ SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.     

Cobalt‐Catalyzed Z‐Selective Hydrosilylation of Terminal Alkynes

A cobalt‐catalyzed Z ‐selective hydrosilylation of alkynes has been developed relying on catalysts generated from bench‐stable Co(OAc)₂ and pyridine‐2,6‐diimine (PDI) ligands. A variety of functionalized aromatic and aliphatic alkynes undergo this transformation, yielding Z ‐vinylsilanes in high yields with excellent selectivities (Z /E ratio ranges from 90:10 to >99:1). The addition of a catalytic amount of phenol effectively suppressed the Z /E ‐isomerization of the Z ‐vinylsilanes that formed under catalytic conditions.