Reaction of o‐Carboryne with Furans: Facile Synthesis of Carborane‐ Fused Oxanorbornenes and Their Derivatives

o‐Carboryne (1,2‐dehydro‐o‐carborane) is a very useful synthon for the synthesis of a variety of carborane‐functionalized molecules. Diels‐Alder reaction of o‐carboryne with furans gave a series of carborane‐fused oxanorbornenes in moderate to high yields using 1‐OTf‐1,2‐C₂B₁₀H₁₁ as carboryne precursor. The resultant cycloadducts can undergo hydrogenation, cyclic oxidation, bromination, [4 + 2]/[2 + 2] cycloaddition and nucleophilic ring opening reaction to afford a variety of highly functionalized carboranes that may find applications as useful basic units in medicine and materials science.     

Asymmetric Synthesis of Spiropyrazolones through Phosphine‐Catalyzed [4+1] Annulation

An enantioselective synthesis of spiropyrazolones from allenoate‐derived MBH acetates and pyrazolones through a phosphine‐mediated [4+1] annulation process has been developed. Spiropyrazolones were readily prepared in good chemical yields and good to high enantioselectivities. This is the first asymmetric example in which α‐substituted allenoates were utilized as a C₄ synthon for phosphine‐catalyzed [4+1] annulation.     

Short Access to Belt Compounds with Spatially Close CC Bonds and Their Transannular Reactions

Two domino Diels–Alder adducts were obtained from 3,7‐bis(cyclopenta‐2,4‐dien‐1‐ylidene)‐cis‐bicyclo[3.3.0]octane and dimethyl acetylenedicarboxylate or N‐methylmaleimide under microwave irradiation. From the first adduct, a C₂₀H₂₄ diene with C_2v symmetry was obtained by Zn/AcOH reduction, hydrolysis, oxidative decarboxylation, and selective hydrogenation. Photochemical [2+2] cycloaddition of this diene gave a thermally unstable cyclobutane derivative, which reverts to the diene. However, both the diene and the cyclobutane derivatives could be identified by X‐ray diffraction analysis upon irradiation of the diene crystal. New six‐membered rings are formed upon the transannular addition of bromine or iodine to the diene. The N‐type selectivity of the addition was examined by theoretical calculations, which revealed the distinct susceptibility of the doubly bonded carbon atoms to the bromine attack.     

Synthesis of Tetracyclo[6.2.2.23,6.02,7]tetradeca-4,9,11,13-Tetraene

The title hydrocarbon 3, a C₁₄H₁₄ tetracyclic tetraene of C_2v-symmetry, was synthesized by new routes starting from 1,8,9,10-tetrachloro-11,11-dimethoxytricyclo[6.2.1.0^2,7]undeca-3,5,9-triene (1). The Diels-Alder cycloaddition of 1 with 2-chloroacrylyl chloride, a ketene equivalent, followed by subsequent reduction, dechlorination and deacctalization afforded the ketol 12 as a key intermediate. Elaboration of target compound 3 was carried out by either the method of ring enlargement of 12 or (better) the route of Diels-Alder reaction of decarbonylated 12 with trans-1,2-bis(phenylsulfonyl)ethcnc, an acetylene equivalent, to give trienol 17, followed by dehydration. Upon irradiation, 3 underwent intercyclic [2 + 2]-addition to caged hexacyclic diene 4. At 120°C, 3 decomposed into barrelene and benzene quantitatively.     

Design,Synthesis and Late-Stage Modification of Indane-Based Peptides via [2+2+2] Cyclotrimerization

Here, we prepared several dipeptides containing 2-aminoindane-2-carboxylic acid (Aic) and carried out further synthetic transformations. Synthesis and purification of modified peptides by using [2+2+2] cyclotrimerization is a challenging task. We are able to modify the unusual amino acids and peptide derivatives by late-stage incorporation of benzylhalo functionality. To incorporate benzylhalo moiety we used [2+2+2] cyclotrimerization in the presence of Mo(CO)₆. These halo derivatives are potential substrates for further modification by Sonogashira reaction, Suzuki–Miyaura cross-coupling, sultine formation, and the Diels–Alder reaction sequence.     

In situ generation of vinyl allenes and its applications to one-pot assembly of cyclohexene, cyclooctadiene, 3,7-nonadienone, and bicyclo[6.4.0]dodecene derivatives with palladium-catalyzed multicomponent reactions

A novel tandem Pd-catalyzed cross-coupling and [4 + 4] cycloaddition sequence allows the rapid synthesis of eight-membered carbocycles starting from alpha-bromovinyl arenes and propargyl bromides in one reaction vessel. It is noteworthy that four components are assembled into one molecule via this procedure. In contrast to alpha-bromovinyl arenes, alpha-bromovinyl alkanes afforded tandem cross-coupling and homo [4 + 2] cycloaddition products. Subjecting an equimolar mixture of alpha-bromostyrene and 2-bromo-1-octene to propargyl bromides furnished the tandem Pd-catalyzed cross-coupling and hetero [4 + 2] cycloaddition product. Exposure of equimolar mixtures of alpha-bromovinyl arenes to allenylindium resulted in tandem a Pd-catalyzed cross-coupling and hetero [4 + 4] cycloaddition products. Synthesis of vinylallene from the reaction of vinyl triflate with allenylindium followed by Pd-catalyzed carbon monoxide insertion reaction gave the corresponding 3,7-nonadienone product via tandem Pd-catalyzed cross-coupling and [4 + 4 + 1] annulation. Tandem Pd-catalyzed cross-coupling, [4 + 4] cycloaddition, and [4 + 2] cycloaddition provided the rapid synthesis of bicyclo[6.4.0]dodecene derivatives starting from alpha-bromovinyl arenes, propargyl bromides, and dienophiles in one operation, in which five components were integrated into one molecule.     

FeCl3-Mediated Reaction of 1,4-Dilithio-1,3-dienes with Alkynes Affording Benzene Derivatives

Unactivated alkynes reacted with 1,4-dilithio-1,3-diene derivatives in the presence of FeCl3 affording substituted benzene derivatives via a formal[4 2] cycloaddition.     

Rhodium-Catalyzed Intermolecular [4+2] Cycloaddition of Unactivated Substrates

No electron-withdrawing or electron-releasing substituents are necessary for the substrates in the rhodium-catalyzed [4+2] cycloaddition reaction between a vinylallene and an ordinary alkyne under mild conditions [Eq. (1)]. The use of the strongly electron-accepting P[OCH(CF₃)₂]₃ ligand affords the optimal rhodium catalyst. cod = 1,5-cyclooctadiene.     

Site-selective photocycloadditions of 2-pyrones with electron-poor olefins and the derivation from the cycloadducts

Photosensitized cycloaddition of 4,6-dimethyl-2-pyrone ( 1 ) with methacrylonitrile ( 3b ) afforded two types of [2 + 2]cycloadducts, 4b and 6b , across the C₅-C₆ and C₃-C₄ double bonds in 1 , respectively. Photosensitized reactions of 1 with dimethyl maleate and dimethyl cyclobutene-1,2-dicarboxylate gave [2 + 2]cycload-ducts 4d, 4e across the C₅-C₆ double bond, in addition to [4 + 2]cycloadduct 9d or bicyclo[4.2.0]octadiene 10e . The photoreactions of methyl 2-pyrone-5-carboxylate ( 2 ) with 3b and 2-chloroacrylonitrile ( 3c ) gave [4 + 2]cycloadducts 5b, 5c in addition to [2 + 2]cycloadducts 11b and 11c across the C₅-C₆ double bond in 2 . The photocycloaddition mechanism was explained from results calculated by means of PM3-CI method. Namely, the site- and/or regio-selective products, 4, 5, 8, 9 and 10 were thought to come from the same site-selective radical intermediates in the case of electron-poor olefins. Pyrolysis and/or hydrolysis of the cycload-ducts 4e, 5b, 5c gave 5,6-dihydro-2-pyrone 12 or benzene derivatives.     

Stereospecific and Stereoselective Rhodium(I)‐Catalyzed Intramolecular [2+2+2] Cycloaddition of Allene‐Ene‐Ynes: Construction of Bicyclo[4.1.0]heptenes

Treatment of the allene‐ene‐yne substrates with [{RhCl(CO)₂}₂] effected the intramolecular [2+2+2]‐type ring‐closing reaction to produce various of tri‐ and tetracyclic derivatives containing a cyclopropane ring. The reaction is highly stereoselective as well as stereospecific with good to excellent yields.     

Transition Metal Cation Salts in Organic Synthesis

Reaction of lithium diisopropylamide (LDA) with (η⁴-1,3-cyclohexadiene)Fe(CO)₃ complexes bearing functionalized side chains at C-5, under an atmosphere of carbon monoxide, gives bridged bicyclo[3,2,1]octene and bicyclo[3,3,1]nonene systems after electrophilic quenching. Under the same reaction conditions, intramolecular cyclization of acyclic (η⁴- 1,3-butadiene)Fe(CO)₃ complexes with functionalized side chains at the terminal position of the diene ligands furnishes fused bicyclo[3.3,0]octanone and bicyclo[4.3.0]nonanone derivatives after acid quenching. The addition of a variety of the highly functionalized zinc-copper reagents RCu(CN)ZnI to the (η⁷-cycloheptatrienyl)Cr(CO) gives (η⁶-cyclohepta-1,3,5-triene)Cr(CO)₃ complexes with a functionalized side-chain at the C-7 position of the ring. Intramolecular cyclization of ester-subsbtuted adducts using lithium diisopropylamide generates fused bicyclo[5.3.0]decane and bicyclo[5.4.0]undecane derivatives. The addition of a variety of the highly functionalized zinc-copper reagents RCu(CN)Znl to the (η⁴-cyclohexa-1,3-diene)Mo(CO)₂(Cp) at the terminus of the coordinated diene ligand gives [Mo(π-allyl)(CO)₂(Cp)](Cp = cyclopentadienyl) complexes with the functionalized side-chain at the C-4 position of the ring. Intramolecular cyclization of the (π-allyl)molybdenum complex containing a pendant propanoic acid unit generates the δ-lactone derivative.     

Electron‐Rich Diferrous–Phosphane–Thiolates Relevant to Fe‐only Hydrogenase: Is Cyanide “Nature's Trimethylphosphane”?

The two‐step one‐pot oxidative decarbonylation of [Fe₂(S₂C₂H₄)(CO)₄(PMe₃)₂] ( 1 ) with [FeCp₂]PF₆, followed by addition of phosphane ligands, led to a series of diferrous dithiolato carbonyls 2 – 6 , containing three or four phosphane ligands. In situ measurements indicate efficient formation of 1 ²⁺ as the initial intermediate of the oxidation of 1 , even when a deficiency of the oxidant was employed. Subsequent addition of PR₃ gave rise to [Fe₂(S₂C₂H₄)(μ‐CO)(CO)₃(PMe₃)₃]²⁺ ( 2 ) and [Fe₂(S₂C₂H₄)(μ‐CO)(CO)₂(PMe₃)₂(PR₃)₂]²⁺ (R=Me 3 , OMe 4 ) as principal products. One terminal CO ligand in these complexes was readily substituted by MeCN, and [Fe₂(S₂C₂H₄)(μ‐CO)(CO)₂(PMe₃)₃(MeCN)]²⁺ ( 5 ) and [Fe₂(S₂C₂H₄)(μ‐CO)(CO)(PMe₃)₄(MeCN)]²⁺ ( 6 ) were fully characterized. Relevant to the H_red state of the active site of Fe‐only hydrogenases, the unsymmetrical derivatives 5 and 6 feature a semibridging CO ligand trans to a labile coordination site.     

Stereoselective Rhodium‐Catalysed [2+2+2] Cycloaddition of Linear Allene–Ene/Yne–Allene Substrates: Reactivity and Theoretical Mechanistic Studies

Allene–ene–allene ( 2 and 5 ) and allene–yne–allene ( 3 and 7 ) N‐tosyl and O‐linked substrates were satisfactorily synthesised. The [2+2+2] cycloaddition reaction catalysed by the Wilkinson catalyst [RhCl(PPh₃)₃] was evaluated. Substrates 2 and 5 , which bear a double bond in the central position, gave a tricyclic structure in a reaction in which four contiguous stereogenic centres were formed as a single diastereomer. The reaction of substrates 3 and 7 , which bear a triple bond in the central position, gave a tricyclic structure with a cyclohexenic ring core, again in a diastereoselective manner. All cycloadducts were formed by a regioselective reaction of the inner allene double bond and, therefore, feature an exocyclic diene motif. A Diels–Alder reaction on N‐tosyl linked cycloadducts 8 and 10 allowed pentacyclic scaffolds to be diastereoselectively constructed. The reactivity of the allenes on [2+2+2] cycloaddition reactions was studied for the first time by density functional theory calculations. This mechanistic study rationalizes the order in which the unsaturations take part in the catalytic cycle, the reactivity of the two double bonds of the allene towards the [2+2+2] cycloaddition reaction, and the diastereoselectivity of the reaction.     

Efficient [4+1]/[3+2+1] bis-cyclizations stereoselectively yielding unprecedented polyacyclic indeno-fused xanthenes

Concise and efficient [4+1]/[3+2+1] bis-cyclizations of o-phthalaldehyde with cyclic 1,3-dicarbonyls have been established for the stereoselective synthesis of unprecedented polycyclic indeno[2,1-l]xanthene derivatives. The multicomponent domino reaction (MDR, AB₂ type) is easy to perform by mixing inexpensive substrates in HOAc at room temperature. The present synthesis shows attractive properties such as the simple one-pot fashion, high bond-forming efficiency, and easy purifications. Up to two new rings and four sigma-bonds were achieved in these MDRs without using any metal catalysts.     

Rhodium-Catalyzed Enantioselective [4+2] Cycloadditions of Vinylcarbenes with Dienes

The reaction of 2-siloxycyclo-1,3-dienes with E-vinyldiazoacetates in the presence of the bulky chiral dirhodium tetracarboxylate catalyst, Rh₂(R-p-PhTPCP)₄ results in an enantioselective [4+2] cycloaddition, in which three new stereogenic centers are formed. The [4+2] cycloadducts are generated as single diastereomers with high enantiocontrol (95–98 % ee). When the diene contains an additional stereogenic center, effective kinetic resolution can be achieved.     

5,8,11‐Trioxa‐2,14‐di­thia­bi­cyclo­[13.4.1]­icosa‐1(19),15,17‐trien‐20‐one

The title compound, C₁₅H₂₀O₄S₂, crystallizes in a chiral space group although it contains mirror symmetry. The tropone ring is inclined at an angle of 50.3 (1)° to the crown ether ring. The planarity of the tropone ring system itself is diminished by as much as 20.8 (4)°.     

Pi-extended o-quinoidal tropone derivatives: experimental and theoretical studies of naphtho[2,3-c]tropone and anthro[2,3-c]tropone

pi-Extended o-quinoidal tropone derivatives, naphtho[2,3-c]tropone (3) and anthro[2,3-c]tropone (4), have been investigated theoretically as well as experimentally. The geometrical optimization of 3,4 and related compounds at the B3LYP level employing 6-31G* basis set as well as the GIAO calculations at the RHF level employing the 6-31+G* basis set have been performed to evaluate the contributions of the polarized resonance forms to these molecules. The GIAO calculated NICS(1) values indicate that the aromaticities of the tropone rings of o-quinoidal 3 and 4 are significantly increased as compared with that of parent tropone (1) at the expense of the fused benzenoid rings, consistent with the significant electronic polarization of these molecules in the ground state. On the other hand, the fusion of a benzene or naphthalene ring to the 2,3- or 4,5-position of tropone leads to diminution of aromaticity in the resulting tropone moiety. Experimentally, irradiation of 6,7-(2',3'-naphtho)bicyclo[3.2.0]hepta-3,6-dien-2-one (10) in a rigid glass at -196 degrees C leads to the formation of, which exhibits a characteristic UV-Vis absorption extending to 700 nm and undergoes rapid [pi 12 + pi 14] dimerization upon thawing the glass. In contrast, 6,7-(2',3'-anthro)bicyclo[3.2.0]hepta-3,6-dien-2-one (11) showed no sign of isomerization to 4 under the same reaction conditions.     

Rhodium‐Catalyzed Enantioselective [4+2] Cycloadditions of Vinylcarbenes with Dienes

The reaction of 2‐siloxycyclo‐1,3‐dienes with E‐vinyldiazoacetates in the presence of the bulky chiral dirhodium tetracarboxylate catalyst, Rh₂(R‐p‐PhTPCP)₄ results in an enantioselective [4+2] cycloaddition, in which three new stereogenic centers are formed. The [4+2] cycloadducts are generated as single diastereomers with high enantiocontrol (95–98 % ee). When the diene contains an additional stereogenic center, effective kinetic resolution can be achieved.     

A Diels-Alder approach for the synthesis of highly functionalized benzo-annulated indane-based α-amino acid derivatives via a sultine intermediate

The synthesis of various highly functionalized benzo-annulated indane-based α-amino acid (AAA) derivatives are reported via a [4+2] cycloaddition strategy using a sultine derivative, containing an AAA moiety, as a reactive diene component. By adopting this strategy, a new α,α-dialkylated indane-based C₆₀ fullerene containing a constrained AAA unit is reported.     

Dicarbonyldi‐μ‐chloro‐cis,cis‐η4‐1,5‐cyclo­octa­dienedirhodium(I)

The title compound, dicarbonyl‐1κ²C‐di‐μ‐chloro‐1:2κ⁴Cl‐[cis,cis‐2(η⁴)‐1,5‐cyclo­octa­diene]­di­rhodium(I), [Rh₂Cl₂(C₈H₁₂)(CO)₂], consists of a di­chloro‐bridged dimer of rhodium, with a non‐bonded Rh?Rh distance of 3.284 (2) Å. One Rh atom is coordinated to two carbonyl ligands, while the other Rh atom is coordinated to the cyclo­octa­diene moiety.