Metal-Organic Frameworks as Hosts for Fluorinated Azobenzenes: A Path towards Quantitative Photoswitching with Visible Light

Fifteen new photochromic hybrid materials were synthesized by gas phase loading of fluorinated azobenzenes, namely ortho-tetrafluoroazobenzene (tF-AZB), 4H,4H′-octafluoroazobenzene (oF-AZB), and perfluoroazobenzene (pF-AZB), into the pores of the well-known metal-organic frameworks MOF-5, MIL-53(Al), MIL-53(Ga), MIL-68(Ga), and MIL-68(In). Their composition was analysed by elemental (CHNS) and DSC/TGA. For pF-AZB_0.34@MIL-53(Al), a structural model based on high-resolution synchrotron powder diffraction data was developed and the host-guest and guest-guest interactions were elucidated from this model. These interactions of O−H⋅⋅⋅F and π⋅⋅⋅π type were confirmed by significant shifts of the O−H frequencies in loaded and unloaded MOFs of the MIL-53 and MIL-68 series. Most remarkably, all of the synthesized F-AZB@MOF systems can be switched with visible light, and some of them show almost quantitative (>95 %) photo-isomerization between its E and Z forms with no significant fatigue after repeated switching cycles.     

Photo-Induced Switchable Binding Behavior of Bridged Bis(β-cyclodextrin) with an Azobenzene Dicarboxylate Linker

A bridged bis(β-cyclodextrin) (1) with an azobenzene dicarboxylate linker was synthesized, and its binding behavior with a fluorescent dye, acridine red (AR), was investigated by means of fluorescence spectroscopy. Due to the photo-induced conversion of the azobenzene dicarboxylate linker from the trans-conformer to the cis-conformer, 1 exhibits a different binding behavior before and after UV light irradiation, giving a stronger binding ability towards AR in the cis form. This switchable binding behavior of 1 may open a new channel to the design of azobenzene-linked dimeric receptors as photo-induced molecular devices.     

Reversible Photoswitching of RNA Hybridization at Room Temperature with an Azobenzene C‐Nucleoside

Photoregulation of RNA remains a challenging task as the introduction of a photoswitch entails changes in the shape and the stability of the duplex that strongly depend on the chosen linker strategy. Herein, the influence of a novel nucleosidic linker moiety on the photoregulation efficiency of azobenzene is investigated. To this purpose, two azobenzene C‐nucleosides were stereoselectively synthesized, characterized, and incorporated into RNA oligonucleotides. Spectroscopic characterization revealed a reversible and fast switching process, even at 20 °C, and a high thermal stability of the respective cis isomers. The photoregulation efficiency of RNA duplexes upon trans‐to‐cis isomerization was investigated by using melting point studies and compared with the known D ‐threoninol‐based azobenzene system, revealing a photoswitching amplitude of the new residues exceeding 90 % even at room temperature. Structural changes in the duplexes upon photoisomerization were investigated by using MM/MD calculations. The excellent photoswitching performance at room temperature and the high thermal stability make these new azobenzene residues promising candidates for in‐vivo and nanoarchitecture photoregulation applications of RNA.     

E/Z Molecular Photoswitches Activated by Two-Photon Absorption: Comparison between Different Families

Nonlinear optical techniques as two-photon absorption (TPA) have raised relevant interest within the last years due to the capability to excite chromophores with photons of wavelength equal to only half of the corresponding one-photon absorption energy. At the same time, its probability being proportional to the square of the light source intensity, it allows a better spatial control of the light-induced phenomenon. Although a consistent number of experimental studies focus on increasing the TPA cross section, very few of them are devoted to the study of photochemical phenomena induced by TPA. Here, we show a design strategy to find suitable E/Z photoswitches that can be activated by TPA. A theoretical approach is followed to predict the TPA cross sections related to different excited states of various photoswitches’ families, finally concluding that protonated Schiff-bases (retinal)-like photoswitches outperform compared to the others. The donor-acceptor substitution effect is therefore rationalized for the successful TPA activatable photoswitch, in order to maximize its properties, finally also forecasting a possible application in optogenetics. Some experimental measurements are also carried out to support our conclusions.     

Hydrazone Photoswitches for Structural Modulation of Short Peptides

Molecules that undergo light-driven structural transformations constitute the core components in photoswitchable molecular systems and materials. Among various families of photoswitches, photochromic hydrazones have recently emerged as a novel class of photoswitches with superb properties, such as high photochemical conversion, spectral tunability, thermal stability, and fatigue resistance. Hydrazone photoswitches have been adopted in various adaptive materials at different length scales, however, their utilization for modulating biomolecules still has not been explored. Herein, we present new hydrazone switches that can photomodulate the structures of short peptides. Systematic investigation on a set of hydrazone derivatives revealed that installation of the amide group does not significantly alter the photoswitching behaviors. Importantly, a hydrazone switch comprising an upper phenyl ring and a lower quinolinyl ring was effective for structural control of peptides. We anticipate that this work, as a new milestone in the research of hydrazone switches, will open a new avenue for structural and functional control of biomolecules.     

Sulfur and Azobenzenes,a Profitable Liaison: Straightforward Synthesis of Photoswitchable Thioglycosides with Tunable Properties

Azobenzene photoswitches are valuable tools for controlling properties of molecular systems with light. We have been investigating azobenzene glycoconjugates to probe carbohydrate-protein interactions and to design glycoazobenzene macrocycles with chiroptical and physicochemical properties modulated by light irradiation. To date, direct conjugation of glycosides to azobenzenes was performed by reactions providing target compounds in limited yields. We therefore sought a more effective and reliable coupling method. In this paper, we report on a straightforward thioarylation of azobenzene derivatives with glycosyl thiols as well as other thiols, thereby increasing the scope of azobenzene conjugation. Even challenging unsymmetrical conjugates can be achieved in good yields via sequential or one-pot procedures. Importantly, red-shifted azoswitches, which are addressed with visible light, were easily functionalized. Additionally, by oxidation of the sulfide bridge to the respective sulfones, both the photochromic and the thermal relaxation properties of the core azobenzene can be tuned. Utilizing this option, we realized orthogonal three-state photoswitching in mixtures containing two distinct azobenzene thioglycosides.     

DNA在氨基功能化偶氮苯自组装膜表面的固定

采用简单快速的方法制备出将DNA固定在其表面的单分子层敏感膜.首先采用表面自组装技术将硅氧烷基偶氮苯衍生物H2NAzoCONHC3Si(OCH3)3(APDA-N-TMSPBA)组装在硅表面,在详细考察单分子层薄膜的化学结构、表面浸润性和分子表面形貌之后,又通过紫外吸收光谱(UV)在位考察了硅氧烷基偶氮苯衍生物的光学异构特性.在DNA在自组装薄膜固定后,X光电子能谱仪(XPS)结果显示出现了明显的磷元素信号,表明DNA分子可以成功固定在自组装膜表面.     

Switchable Solubility of Azobenzene-Based Bolaamphiphiles

The ability to design amphiphiles with predictable solubility properties is of everlasting interest in supramolecular chemistry. Relevant structural parameters include the hydrophobic–hydrophilic balance and structural flexibility. In this work, we investigate the water solubility of azobenzene-based triglycerol bolaamphiphiles (TGBAs). In particular, we analyzed the structural effects of backbone hydrophobicity, flexibility, and cis/trans isomerization on the water solubility of a subset of five TGBAs. This leads to the first example of a non-ionic bolaamphiphile whose water solubility can be changed by irradiation with light. The underlying kinetics were monitored using liquid chromatography and a closer analysis of the underlying aggregation processes provides a mechanistic understanding of the light-driven dissolution process. We anticipate that the results obtained will help to engineer bolaamphiphiles with predictable solution properties in the future.     

General Principles for the Design of Visible-Light-Responsive Photoswitches: Tetra-ortho-Chloro-Azobenzenes

Molecular photoswitches enable reversible external control of biological systems, nanomachines, and smart materials. Their development is driven by the need for low energy (green-red-NIR) light switching, to allow non-invasive operation with deep tissue penetration. The lack of clear design principles for the adaptation and optimization of such systems limits further applications. Here we provide a design rulebook for tetra-ortho-chloroazobenzenes, an emerging class of visible-light-responsive photochromes, by elucidating the role that substituents play in defining their key characteristics: absorption spectra, band overlap, photoswitching efficiencies, and half-lives of the unstable cis isomers. This is achieved through joint photochemical and theoretical analyses of a representative library of molecules featuring substituents of varying electronic nature. A set of guidelines is presented that enables tuning of properties to the desired application through informed photochrome engineering.     

Photoisomerization of Arylazopyrazole Photoswitches: Stereospecific Excited‐State Relaxation

Electronic structure calculations and nonadiabatic dynamics simulations (more than 2000 trajectories) are used to explore the Z–E photoisomerization mechanism and excited‐state decay dynamics of two arylazopyrazole photoswitches. Two chiral S₁/S₀ conical intersections with associated enantiomeric S₁ relaxation paths that are barrierless and efficient (timescale of ca. 50 fs) were found. For the parent arylazopyrazole (Z8) both paths contribute evenly to the S₁ excited‐state decay, whereas for the dimethyl derivative (Z11) each of the two chiral cis minima decays almost exclusively through one specific enantiomeric S₁ relaxation path. To our knowledge, the Z11 arylazopyrazole is thus the first example for nearly stereospecific unidirectional excited‐state relaxation.     

Fluorinated Azobenzenes for Shape‐Persistent Liquid Crystal Polymer Networks

Liquid crystal polymer networks respond with an anisotropic deformation to a range of external stimuli. When doped with molecular photoswitches, these materials undergo complex shape modifications under illumination. As the deformations are reversed when irradiation stops, applications where the activated shape is required to have thermal stability have been precluded. Previous attempts to incorporate molecular switches into thermally stable photoisomers were unsuccessful at photogenerating macroscopic shapes that are retained over time. Herein, we show that to preserve photoactivated molecular deformation on the macroscopic scale, it is important not only to engineer the thermal stability of the photoswitch but also to adjust the cross‐linking density in the polymer network and to optimize the molecular orientations in the material. Our strategy resulted in materials containing fluorinated azobenzenes that retain their photochemical shape for more than eight days, which constitutes the first demonstration of long‐lived photomechanical deformation in liquid‐crystal polymer networks.     

Photoswitchable Adhesives Using Azobenzene‐Containing Materials

Photoinduced reversible solid‐to‐liquid transitions of azobenzene‐containing materials can control adhesion. Photoswitchable adhesives based on azobenzene‐containing small molecules and polymers are under intense investigation. The melting points or glass transition temperatures of such azobenzene‐containing materials in trans and cis forms are above and below room temperature, respectively. Photoswitching of these materials results in reversible trans‐cis isomerization and solid‐to‐liquid transitions. The solid trans azobenzene‐containing materials have strong adhesion and the liquid cis azobenzene‐containing materials have weaker adhesion. In this Minireview, we introduce adhesives based on azobenzene‐containing small molecules and polymers. The remaining challenges and perspectives in the field of photoswitchable adhesives using azobenzene‐containing materials are also discussed.     

Switchable azo-macrocycles: from molecules to functionalisation

Azo-based compounds are a class of switchable systems that have been widely investigated. Furthermore, they are also important for the construction of macrocycles with photoresponsive characteristics. In recent years, there have been many reports describing versatile photoswitchable azo-macrocycles. In addition, the process of photoisomerisation has also been applied to the construction of many types of functionalised molecular machines, such as those required for host–guest chemistry, molecular machines and self-assembly systems. In this review, we summarise the recent progress of azo-macrocycles in molecular structure and functionalisation.     

Active Ester Functionalized Azobenzenes as Versatile Building Blocks

Azobenzenes are important molecular switches that can still be difficult to functionalize selectively. A high yielding Pd-catalyzed cross-coupling method under mild conditions for the introduction of NHS esters to azobenzenes and diazocines has been established. Yields were consistently high with very few exceptions. The NHS functionalized azobenzenes react with primary amines quantitatively. These amines are ubiquitous in biological systems and in material science.     

QM/MM Studies on Photoisomerization Dynamics of Azobenzene Chromophore Tethered to a DNA Duplex: Local Unpaired Nucleobase Plays a Crucial Role

The photoresponsive azobenzene‐tethered DNAs have received growing experimental attention because of their potential applications in biotechnology and nanotechnology; however, little is known about the initial photoisomerization of azobenzene in these systems. Herein we have employed quantum mechanics/molecular mechanics (QM/MM) methods to explore the photoisomerization dynamics of an azobenzene‐tethered DNA duplex. We find that in the S₁ state the trans–cis photoisomerization path is much steeper in DNA than in vacuo, which makes the photoisomerization much faster in the DNA environment. This acceleration is primarily caused by complex steric interactions between azobenzene and the nearby unpaired thymine nucleobase, which also change the photoisomerization mechanism of azobenzene in the DNA duplex.     

Light‐Controlled Regioselective Synthesis of Fullerene Bis‐Adducts

Multi‐functionalization and isomer‐purity of fullerenes are crucial tasks for the development of their chemistry in various fields. In both current main approaches—tether‐directed covalent functionalization and supramolecular masks—the control of regioselectivity requires multi‐step synthetic procedures to prepare the desired tether or mask. Herein, we describe light‐responsive tethers, containing an azobenzene photoswitch and two malonate groups, in the double cyclopropanation of [60]fullerene. The formation of the bis‐adducts and their spectroscopic and photochemical properties, as well as the effect of azobenzene photoswitching on the regiochemistry of the bis‐addition, have been studied. The behavior of the tethers depends on the geometry of the connection between the photoactive core and the malonate moieties. One tether lead to a strikingly different adduct distribution for the E and Z isomers, indicating that the covalent bis‐functionalization of C₆₀ can be controlled by light.     

Observation of Collective Photoswitching in Free-Standing TATA-Based Azobenzenes on Au(111)

Light-induced transitions between the trans and cis isomer of triazatriangulenium-based azobenzene derivatives on Au(111) surfaces were observed directly by scanning tunneling microscopy, allowing atomic-scale studies of the photoisomerization kinetics. Although the azobenzene units in these adlayers are free-standing and spaced at uniform distances of 1.26 nm, their photoswitching depends on the isomeric state of the surrounding molecules and, specifically, is accelerated by neighboring cis isomers. These collective effects are supported by ab initio calculations indicating that the electronic excitation preferably localizes on the n–π* state of trans isomers with neighboring cis azobenzenes.