Environment‐Sensitive Fluorophores with Benzothiadiazole and Benzoselenadiazole Structures as Candidate Components of a Fluorescent Polymeric Thermometer

An environment‐sensitive fluorophore can change its maximum emission wavelength (λ_em), fluorescence quantum yield (Φ_f), and fluorescence lifetime in response to the surrounding environment. We have developed two new intramolecular charge‐transfer‐type environment‐sensitive fluorophores, DBThD‐IA and DBSeD‐IA, in which the oxygen atom of a well‐established 2,1,3‐benzoxadiazole environment‐sensitive fluorophore, DBD‐IA, has been replaced by a sulfur and selenium atom, respectively. DBThD‐IA is highly fluorescent in n‐hexane (Φ_f=0.81, λ_em=537 nm) with excitation at 449 nm, but is almost nonfluorescent in water (Φ_f=0.037, λ_em=616 nm), similarly to DBD‐IA (Φ_f=0.91, λ_em=520 nm in n‐hexane; Φ_f=0.027, λ_em=616 nm in water). A similar variation in fluorescence properties was also observed for DBSeD‐IA (Φ_f=0.24, λ_em=591 nm in n‐hexane; Φ_f=0.0046, λ_em=672 nm in water). An intensive study of the solvent effects on the fluorescence properties of these fluorophores revealed that both the polarity of the environment and hydrogen bonding with solvent molecules accelerate the nonradiative relaxation of the excited fluorophores. Time‐resolved optoacoustic and phosphorescence measurements clarified that both intersystem crossing and internal conversion are involved in the nonradiative relaxation processes of DBThD‐IA and DBSeD‐IA. In addition, DBThD‐IA exhibits a 10‐fold higher photostability in aqueous solution than the original fluorophore DBD‐IA, which allowed us to create a new robust molecular nanogel thermometer for intracellular thermometry.     

1,2,5-Triphenylpyrrole Derivatives with Dual Intense Photoluminescence in Both Solution and the Solid State: Solvatochromism and Polymorphic Luminescence Properties

Five organic luminophores, 1,2,5-triphenylpyrrole (TPP) derivatives 3 a – e bearing electron-withdrawing or electron-donating groups, have been synthesized by Pd-catalyzed Suzuki coupling of 1-phenyl-2,5-di(4′-bromophenyl)pyrrole and para-substituted phenylboronic acid derivatives. They possess good thermal stabilities with high decomposition temperatures above 310 °C. Investigation of the photophysical properties of the luminogens 3 a – e indicated that they exhibited dual intense photoluminescence in both solution and the solid state due to their twisted conformations, and their fluorescence quantum yields (Φ_F) were determined as 68.7–94.9 % in THF solution and 19.1–52.0 % in solid powder form. Compounds 3 a – c bearing electron-accepting groups exhibited remarkable solvatochromism with large Stokes shifts, attributable to their D-π-A structure and intramolecular charge-transfer effect. In particular, 3 a , bearing aldehyde groups, displayed an obvious red-shift of the emission band from 445 to 564 nm with increasing solvent polarity. However, no obvious solvatochromic behavior was observed for compounds 3 d , e bearing electron-donating groups. The luminophore 3 a exhibited polymorphic luminescence properties and crystallization-induced emission enhancement.     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Bright Solid‐State Emission of Disilane‐Bridged Donor–Acceptor–Donor and Acceptor–Donor–Acceptor Chromophores

The development of disilane‐bridged donor–acceptor–donor (D‐Si‐Si‐A‐Si‐Si‐D) and acceptor–donor–acceptor (A‐Si‐Si‐D‐Si‐Si‐A) compounds is described. Both types of compound showed strong emission (λ_em=ca. 500 and ca. 400 nm, respectively) in the solid state with high quantum yields (Φ: up to 0.85). Compound 4 exhibited aggregation‐induced emission enhancement in solution. X‐ray diffraction revealed that the crystal structures of 2 , 4 , and 12 had no intermolecular π–π interactions to suppress the nonradiative transition in the solid state.     

Multicolor Amplified Spontaneous Emissions Based on Organic Polymorphs That Undergo Excited‐State Intramolecular Proton Transfer

Two polymorphs emitting near‐infrared ( 1 R form: α phase, λ_em=702 nm, Φ_f=0.41) and orange‐red fluorescence ( 1 O form: β phase, λ_em=618 nm, Φ_f=0.05) were synthesized by finely controlling the crystallization conditions of compound 1 , a structurally simple excited‐state intramolecular proton transfer (ESIPT)‐active molecule. Multicolor amplified spontaneous emissions (ASEs) were realized, for the first time, based on these polymorphs. Notably, the 1 O crystal underwent heating‐induced phase transformation from the β phase to the α form in a single‐crystal to single‐crystal (SCSC) manner accompanied with an unprecedented ASE changing. The ASE behavior of polymorphs 1 R , 1 O as well as the ASE changing during SCSC was investigated. The feasibility of multicolor lasing based on the present organic polymorphs was confirmed, which may provide a new development strategy for organic laser science and technology.     

Self-complementary Tetracationic Cyclophanes Containing 4,4′-Bipyridinium and 2,5-Dimethoxy-1,4-xylyl Subunits

4,4′-Bipyridinium-based tetracationic cyclophanes containing a 2,5-dimethoxy-1,4-xylyl unit were synthesized by using either m-terphenyl building blocks or incorporating a 4-hydroxy benzyl spacer between the complementary subunits. The cyclophanes show weak intramolecular charge-transfer (CT) bands in the visible region and one of the cyclophanes formed a green-coloured CT complex with ferrocene with an association constant (K _a) of 6.3?M^?1. The electrochemical parameters obtained for the cyclophanes indicate that all the redox processes are reversible.     

Intramolecular Phosphacyclization: Polyaromatic Phosphonium P-Heterocycles with Wide-Tuning Optical Properties

Rationally designed cationic phospha-polyaromatic fluorophores were prepared through intramolecular cyclization of the tertiary ortho-(acene)phenylene-phosphines mediated by Cu^II triflate. As a result of phosphorus quaternization, heterocyclic phosphonium salts 1 c – 3 c , derived from naphthalene, phenanthrene, and anthracene cores, exhibited very intense blue to green fluorescence (Φ_em=0.38–0.99) and high photostability in aqueous medium. The structure–emission relationship was further investigated by tailoring the electron-donating functions to the anthracene moiety to give dyes 4 c – 6 c with charge-transfer character. The latter significantly decreases the emission energy to reach near-IR region. Thus, the intramolecular phosphacyclization renders an ultra-wide tuning of fluorescence from 420 nm ( 1 c ) to 780 nm ( 6 c ) in solution, extended to 825 nm for 6 c in the solid state with quantum efficiency of approximately 0.07. The physical behavior of these new dyes was studied spectroscopically, crystallographically, and electrochemically, whereas computational analysis was used to correlate the experimental data with molecular electronic structures. The excellent stability, water solubility, and attractive photophysical characteristics make these phosphonium heterocycles powerful tools in cell imaging.     

Host–Guest Recognition and Fluorescence of a Tetraphenylethene‐Based Octacationic Cage

We report the synthesis and characterization of a three‐dimensional tetraphenylethene‐based octacationic cage that shows host–guest recognition of polycyclic aromatic hydrocarbons (e.g. coronene) in organic media and water‐soluble dyes (e.g. sulforhodamine 101) in aqueous media through CH???π, π–π, and/or electrostatic interactions. The cage?coronene exhibits a cuboid internal cavity with a size of approximately 17.2×11.0×6.96 ų and a “hamburger”‐type host–guest complex, which is hierarchically stacked into 1D nanotubes and a 3D supramolecular framework. The free cage possesses a similar cavity in the crystalline state. Furthermore, a host–guest complex formed between the octacationic cage and sulforhodamine 101 had a higher absolute quantum yield (Φ_F=28.5 %), larger excitation–emission gap (Δλ_ex‐em=211 nm), and longer emission lifetime (τ=7.0 ns) as compared to the guest (Φ_F=10.5 %; Δλ_ex‐em=11 nm; τ=4.9 ns), and purer emission (Δλ_FWHM=38 nm) as compared to the host (Δλ_FWHM=111 nm).     

N-Dimethoxyphenylation of highly basic pyrazoles during undivided electrolysis

The reactions of pyrazole, 3,5-dimethylpyrazole, and its 4-nitro derivatives with 1,4-dimethoxybenzene during undivided amperostatic electrolysis in MeCN (CH₂Cl₂) were studied. The basicity of the medium, which depends on the solvent nature, the nature and concentration of pyrazole and the acid-base properties of additives, and the amount of electricity passed determine the yield and relative content of the target products, viz., 1,4-dimethoxy-2-(pyrazol-1-yl)benzenes (1) and 1,4-dimethoxy-1,4-di(pyrazol-1-yl)cyclohexa-2,5-dienes (2). The process occurs mainly through the interaction of the nonionized solvato complex of pyrazole with the 1,4-dimethoxybenzene radical cation and affords radical intermediates structurally similar to compounds 1 and 2. The key stage of the process determining the 1 : 2 ratio is the rearrangement of the intermediately produced 1,4-dimethoxy-1-(pyrazol-1-yl)arenonium cation to the 1-(pyrazol-1-yl)-2,5-dimethoxyarenonium cation.     

Random poly(fluorenylene‐vinylene)s containing 3,7‐Dibenzothiophene‐5,5‐dioxide units: Synthesis,photophysical, and electroluminescence properties

The synthesis of new random poly(arylene‐vinylene)s containing the electron withdrawing 3,7‐dibenzothiophene‐5,5‐dioxide unit was achieved by the Suzuki–Heck cascade polymerization reaction. The properties of poly[9,9‐bis(2‐ethylhexyl)‐2,7‐fluorenylene‐vinylene‐co‐3,7‐dibenzothiophene‐5,5‐dioxide‐vinylene] (50/50 mol/mol, P1 ) and poly[1,4‐bis(2‐ethylhexyloxy)‐2,5‐phenylene‐vinylene‐co‐3,7‐dibenzothiophene‐5,5‐dioxide‐vinylene] (50/50 mol/mol, P2 ) were compared with those of terpolymers obtained by combining the fluorene, dibenzothiophene, and 1,4‐bis(2‐ethylexyloxy)benzene in 20/40/40 ( P3 ), 50/25/25 ( P4 ), and 80/10/10 ( P5 ) molar ratios. The polymers were characterized by ¹H NMR and IR, whereas their thermal properties were investigated by TGA and DSC. Polymers P1–5 are blue–green emitters in solution (λ_em between 481 and 521 nm) whereas a profound red shift observed in the solid state is emission (λ_em from 578 to 608 nm) that can be attributed both to the charge transfer stabilization exerted by the polar medium and to intermolecular interactions occurring in the solid state. Cyclic voltammetry permitted the evaluation of the ionization potentials and also revealed a quasi‐reversible behavior in the reduction scans for the polymers ( P1–4 ) containing the higher amounts of 3,7‐dibenzothiophene‐5,5‐dioxide units. Electroluminescent devices with both ITO/PEDOT‐PSS/ P1–5 /Ca/Al (Type I) and ITO/PEDOT‐PSS/ P1–5 /Alq₃/Ca/Al (Type II) configuration were fabricated showing a yellow to yellow–green emission. In the case of P4 , a luminance of 1835 cd/m² and an efficiency of 0.25 cd/A at 14 V were obtained for the Type II devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2093–2104, 2009     

The supramolecular assembly of tetraaqua-(pyridine-2,5-dicarboxylato)-copper(II) complex: crystal structure,TD-DFT approach,electronic spectra,and photoluminescence study

The copper(II) complex, {[Cu(2,5-pdc)(H₂O)₄]·H₂O} (1) [2,5-pdc?=?pyridine-2,5-dicarboxylate], has been synthesized and characterized by elemental analysis, IR spectroscopy, and X-ray crystallography. The metal shows a distorted octahedral coordination sphere and in solid state the complex forms a 3-D supramolecular network via hydrogen bonding and off-center anti-parallel π–π stacking interactions between py rings. At room temperature, 1 exhibits fluorescence in methanolic solution [λ_ex?=?226?nm, λ_em?=?309, 330, and 341?nm]. The geometry optimization at the B3LYP/LanL2DZ level led to a five-coordinate copper having a distorted square pyramidal geometry. The electronic spectrum of this compound is compared with the results obtained by employing density functional theory (DFT) and time dependent density functional theory calculations.     

Fast and Tunable Phosphorescence from Organic Ionic Crystals

Crystalline diphosphonium iodides [MeR₂P-spacer-R₂Me]I with phenylene ( 1 , 2 ), naphthalene ( 3 , 4 ), biphenyl ( 5 ) and anthracene ( 6 ) as aromatic spacers, are photoemissive under ambient conditions. The emission colors (λ_em values from 550 to 880 nm) and intensities (Φ_em reaching 0.75) are defined by the composition and substitution geometry of the central conjugated chromophore motif, and the anion-π interactions. Time-resolved and variable-temperature luminescence studies suggest phosphorescence for all the titled compounds, which demonstrate observed lifetimes of 0.46–92.23 μs at 297 K. Radiative rate constants k_r as high as 2.8×10⁵ s⁻¹ deduced for salts 1 – 3 were assigned to strong spin-orbit coupling enhanced by an external heavy atom effect arising from the anion-π charge-transfer character of the triplet excited state. These rates of anomalously fast metal-free phosphorescence are comparable to those of transition metal complexes and organic luminophores that utilize triplet excitons via a thermally activated delayed fluorescence mechanism, making such ionic luminophores a new paradigm for the design of photofunctional and responsive molecular materials.     

High‐Contrast Red–Green–Blue Tricolor Fluorescence Switching in Bicomponent Molecular Film

Highly efficient red–green–blue (RGB) tricolor luminescence switching was demonstrated in a bicomponent solid film consisting of (2Z,2′Z)‐2,2′‐(1,4‐phenylene)bis(3‐(4‐butoxyphenyl)acrylonitrile) (DBDCS) and (2Z,2′Z)‐3,3′‐(2,5‐bis(6‐(9H‐carbazol‐9‐yl)hexyloxy)‐1,4‐phenylene)bis(2‐(3,5‐bis(trifluoromethyl)phenyl)acrylonitrile) (m‐BHCDCS). Reversible RGB luminescence switching with a high ratiometric color contrast (λ_em=594, 527, 458 nm for red, green, and blue, respectively) was realized by different external stimuli such as heat, solvent vapor exposure, and mechanical force. It was shown that Förster resonance energy transfer in the bicomponent mixture could be efficiently switched on and off through supramolecular control.     

Photochemical and Thermal Stability of Some Dihydroxyacetophenones Used as UV‐MALDI‐MS Matrices

2,4‐, 2,5‐, 2,6‐ and 3,5‐dihydroxyacetophenone (DHA) used as matrices in matrix‐assisted ultraviolet laser desorption/ionization mass spectrometry (UV‐MALDI‐MS) were studied by steady‐state and transient absorption spectroscopy, together with DFT calculations at the B3LYP level of theory. All compounds have low fluorescence quantum yields, possibly due to an efficient excited‐state intramolecular proton transfer (ESIPT). Laser flash photolysis (LFP) results showed that, only for 2,4‐DHA, a phototautomer could be detected at λ = 400 nm. Their photochemical stability in solution at different wavelengths and conditions was analyzed by UV–Vis and ¹H nuclear magnetic resonance spectroscopy (¹H‐NMR), together with thin layer chromatography and ultraviolet laser desorption/ionization mass spectrometry (UV‐LDI‐MS). Only 3,5‐DHA showed decomposition when irradiated, probably because phototautomerization is not possible. Thermal stability studies of these compounds in solid state were also conducted.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Single Benzene Green Fluorophore: Solid‐State Emissive,Water‐Soluble,and Solvent‐ and pH‐Independent Fluorescence with Large Stokes Shifts

Benzene is the simplest aromatic hydrocarbon with a six‐membered ring. It is one of the most basic structural units for the construction of π conjugated systems, which are widely used as fluorescent dyes and other luminescent materials for imaging applications and displays because of their enhanced spectroscopic signal. Presented herein is 2,5‐bis(methylsulfonyl)‐1,4‐diaminobenzene as a novel architecture for green fluorophores, established based on an effective push–pull system supported by intramolecular hydrogen bonding. This compound demonstrates high fluorescence emission and photostability and is solid‐state emissive, water‐soluble, and solvent‐ and pH‐independent with quantum yields of Φ=0.67 and Stokes shift of 140 nm (in water). This architecture is a significant departure from conventional extended π‐conjugated systems based on a flat and rigid molecular design and provides a minimum requirement for green fluorophores comprising a single benzene ring.     

Single Benzene Green Fluorophore: Solid‐State Emissive,Water‐Soluble,and Solvent‐ and pH‐Independent Fluorescence with Large Stokes Shifts

Benzene is the simplest aromatic hydrocarbon with a six‐membered ring. It is one of the most basic structural units for the construction of π conjugated systems, which are widely used as fluorescent dyes and other luminescent materials for imaging applications and displays because of their enhanced spectroscopic signal. Presented herein is 2,5‐bis(methylsulfonyl)‐1,4‐diaminobenzene as a novel architecture for green fluorophores, established based on an effective push–pull system supported by intramolecular hydrogen bonding. This compound demonstrates high fluorescence emission and photostability and is solid‐state emissive, water‐soluble, and solvent‐ and pH‐independent with quantum yields of Φ=0.67 and Stokes shift of 140 nm (in water). This architecture is a significant departure from conventional extended π‐conjugated systems based on a flat and rigid molecular design and provides a minimum requirement for green fluorophores comprising a single benzene ring.     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Reversible Shape‐Morphing and Fluorescence‐Switching in Supramolecular Nanomaterials Consisting of Amphiphilic Cyanostilbene and Cucurbit[7]uril

We demonstrate a reversible shape‐morphing with concurrent fluorescence switching in the nanomaterials which are complexed with cucurbit[7]uril (CB[7]) in water. The cyanostilbene derivative alone forms ribbon‐like two‐dimensional (2D) nanocrystals with bright yellow excimeric emission in water (λ_em=540 nm, Φ_F=42 %). Upon CB[7] addition, however, the ribbon‐like 2D nanocrystals immediately transform to spherical nanoparticles with significant fluorescence quenching and blue‐shifting (λ_em=490 nm, Φ_F=1 %) through the supramolecular complexation of the cyanostilbene and CB[7]. Based on this reversible fluorescence switching and shape morphing, we could demonstrate a novel strategy of turn‐on fluorescence sensing of spermine and also monitoring of lysine decarboxylase activity.     

Matrix Coordination Induced Emission in a Three-Dimensional Silver Cluster-Assembled Material

Developing highly luminescent and extensively stable silver cluster-assembled materials (SCAMs) from the inferior luminogens and unstable silver cluster is an important and challenging issue. Herein, a new luminescent three-dimensional SCAM ( Ag₁₂CPPP , [Ag₁₂(StBu)₆(CF₃COO)₆(CPPP)₂(DMAc)₁₂]_n; CPPP=2,5-bis(4-cyanophenyl)-1,4-bis(4-(pyridine-4-yl)-phenyl)-1,4-dihydropyrrolo[3,2-b]pyrrole, DMAc=dimethylacetamide) was designed and synthesized with a quadridentate rigid emission ligand ( CPPP ) and a silver–chalcogenolate cluster (SCC) containing 12 Ag^I atoms. The luminescence study indicates that CPPP is an aggregation-caused quenching (ACQ) molecule with twisted intramolecular charge transfer (TICT) character. Benefiting from the strong immobilization effect in the robust framework, the quantum yield of CPPP is greatly enhanced in Ag₁₂CPPP compared with that of CPPP in solution or in the solid state. As a result, Ag₁₂CPPP exhibits typical matrix coordination induced emission (MCIE) effect. Such efficient rigidifying methodology provides a promising approach for enhancing luminescence of ACQ molecules in an aggregated state and strengthening the silver cluster in an unstable state.