Halogen-Bonding Strapped Porphyrin BODIPY Rotaxanes for Dual Optical and Electrochemical Anion Sensing

Anion receptors employing two distinct sensory mechanisms are rare. Herein, we report the first examples of halogen-bonding porphyrin BODIPY [2]rotaxanes capable of both fluorescent and redox electrochemical sensing of anions. ¹H NMR, UV/visible and electrochemical studies revealed rotaxane axle triazole group coordination to the zinc(II) metalloporphyrin-containing macrocycle component, serves to preorganise the rotaxane binding cavity and dramatically enhances anion binding affinities. Mechanically bonded, integrated-axle BODIPY and macrocycle strapped metalloporphyrin motifs enable the anion recognition event to be sensed by the significant quenching of the BODIPY fluorophore and cathodic perturbations of the metalloporphyrin P/P^+. redox couple.     

Color‐Tunable Solid‐State Fluorescence Emission from Carbazole‐Based BODIPYs

Several carbazole‐based boron dipyrromethene (BODIPY) dyes were synthesized by organometallic approaches. Thiazole, benzothiazole, imidazole, benzimidazole, triazole, and indolone substituents were introduced at the 1‐position of the carbazole moiety, and boron complexation of each dipyrrin generated the corresponding compounds 1 , 2 a , and 3 – 6 . The properties of these products were investigated by UV/Vis and fluorescence spectroscopy, cyclic voltammetry, X‐ray crystallography, and DFT calculations. These compounds exhibited large Stokes shifts, and compounds 1 , 2 a , and 3 – 5 fluoresced both in solution and in the solid state. Complex 2 a showed the highest fluorescence quantum yield (Φ_F) in the solid state, therefore boron complexes of the carbazole–benzothiazole hybrids 2 b – f , which had several different substituents, were prepared and the effects of the substituents on the photophysical properties of the compounds were examined. The fluorescence properties showed good correlation with the results of crystal‐packing analyses, and the dyes exhibited color‐tunable solid‐state fluorescence.     

Rationalizing Aggregate Structures with Orbital Contributions to the Exchange-Repulsion Energy**

It is shown that repulsive interactions have a crucial influence on the structure of prototypical non-covalently bonded systems. To explain this, we propose a molecular orbital-based model for the exchange-repulsion contribution to the total interaction energy. As a central result, our model shows that energetically preferred aggregate structures frequently exhibit reduced exchange repulsion, which can be deduced from the nodal structure of certain occupied orbitals. This is used to explain key features of the intermolecular potentials of the Cl₂-He, benzene-benzene, and benzene-hexafluorobenzene aggregates, which are not correctly reproduced by commonly applied electrostatic models.     

Recent Advances in BODIPY Compounds: Synthetic Methods,Optical and Nonlinear Optical Properties,and Their Medical Applications

Organoboron compounds are attracting immense research interest due to their wide range of applications. Particularly, low-coordinate organoboron complexes are receiving more attention due to their improbable optical and nonlinear optical properties, which makes them better candidates for medical applications. In this review, we summarize the various synthetic methods including multicomponent reactions, microwave-assisted and traditional pathways of organoboron complexes, and their optical and nonlinear properties. This review also includes the usage of organoboron complexes in various fields including biomedical applications.     

Solid-State Emission from Mono- and Bichromophoric Boron Dipyrromethene (BODIPY) Derivatives and Comparison with Fluid Solution

The syntheses and crystal structures of sterically crowded mono- and bichromophoric BODIPY-based dyes are reported. The “monomeric” compound is weakly fluorescent in the liquid phase due to fast internal conversion associated with rotation of aryl rings at the boron atom. The side-by-side “dimer” exhibits weak excitonic coupling between the dipyrrin units and is much more emissive in fluid solution. Solid samples of both molecular entities are strongly fluorescent under near-UV illumination. Thus, the mono-chromophore exhibits dual fluorescence from what appears to be a mixture of crystalline and possibly amorphous (or interfacial regions) distributions. The bi-chromophore packs in the crystal as pairs of chromophores with each unit being provided by a different molecule. This leads to excitonic splitting and the formation of a strong H-band in the absorption spectrum. Fluorescence occurs from the corresponding J-species and also from what appears to be an aggregated state associated with interfacial areas. Both bulk and interface-bound states show relatively long-lived fluorescence while the crystal structures indicate the likelihood for fast electronic energy migration between molecules.     

Dual Functioning Thieno‐Pyrrole Fused BODIPY Dyes for NIR Optical Imaging and Photodynamic Therapy: Singlet Oxygen Generation without Heavy Halogen Atom Assistance

We discovered a rare phenomenon wherein a thieno‐pyrrole fused BODIPY dye (SBDPiR690) generates singlet oxygen without heavy halogen atom substituents. SBDPiR690 generates both singlet oxygen and fluorescence. To our knowledge, this is the first example of such a finding. To establish a structure–photophysical property relationship, we prepared SBDPiR analogs with electron‐withdrawing groups at the para‐position of the phenyl groups. The electron‐withdrawing groups increased the HOMO–LUMO energy gap and singlet oxygen generation. Among the analogs, SBDPiR688, a CF₃ analog, had an excellent dual functionality of brightness (82290 m ^?1 cm^?1) and phototoxic power (99170 m ^?1 cm^?1) comparable to those of Pc 4, due to a high extinction coefficient (211 000 m ^?1 cm^?1) and balanced decay (Φ_flu=0.39 and Φ_Δ=0.47). The dual functionality of the lead compound SBDPiR690 was successfully applied to preclinical optical imaging and for PDT to effectively control a subcutaneous tumor.     

A general synthetic strategy for the design of new BODIPY fluorophores based on pyrroles with polycondensed aromatic and metallocene substituents

BODIPYrrole: A general strategy for the design of novel BODIPY fluorophores based on pyrroles with polycondensed aromatic and metallocene substituents has been developed. The strategy involves the acylation of the condensed substituent and treatment of the acylated derivative (as oxime) with acetylene in MOH/DMSO (M = alkali metal) to give pyrroles that were then used for assembly of the BODIPY fluorophores (see scheme).     

具有光谱可调、高量子产率和稳定性的水溶性CdTe/Cd(OH)2核壳结构纳米粒子的可控水相合成

建立了一种简便的、以易得的无机盐为反应前体的水相法制备水溶性、高量子产率以及良好稳定性的CdTe/Cd(OH)2核壳结构量子点。本方法可以通过控制Cd(OH)2 壳层结构的厚度,使不同粒径量子点的荧光发射光谱由蓝绿色渐变到橙红色。利用透射电镜、X射线粉末衍射光谱、荧光光谱以及紫外可见光谱对该CdTe/Cd(OH)2核壳结构量子点进行了表征。CdTe/Cd(OH)2核壳结构量子点所具备的良好的水溶性可望应用于生物标记。本方法简便、反应条件温和并且容易操作,为无机金属化物包覆量子点提供了一种简便的途径。     

Tuning the Photophysical Properties of BODIPY Molecules by π‐Conjugation with Fischer Carbene Complexes

The synthesis, structure, and photophysical properties of novel BODIPY–Fischer alkoxy‐, thio‐, and aminocarbene dyads are reported. The BODIPY chromophore is directly attached to the carbene ligand by an ethylenic spacer, thus forming donor–bridge–acceptor π‐extended systems. The extension of the π‐conjugation is decisive in the equilibrium geometries of the dyads and is clearly reflected in the corresponding absorption and emission spectra. Whereas the BODIPY fragment is mainly isolated in aminocarbene complexes, it is fully conjugated in alkoxycarbene derivatives. The former thus exhibit the characteristic photophysical properties of BODIPY units, whereas complete suppression of the BODIPY fluorescence emission is observed in the latter, as a direct consequence of the strong electron‐accepting character of the (CO)₅M?C moiety. As the π‐acceptor character of the metal–carbene group can be modified, the electronic properties of the conjugated BODIPY can be tuned. Density functional calculations have been carried out to gain insight into the photophysical properties.     

Zn(II) Heteroleptic Halide Complexes with 2-Halopyridines: Features of Halogen Bonding in Solid State

Reactions between Zn(II) dihalides and 2-halogen-substituted pyridines 2-XPy result in a series of heteroleptic molecular complexes [(2-XPy)₂ZnY₂] (Y = Cl, X = Cl (1), Br (2), I (3); Y = Br, X = Cl (4), Br (5), I (6), Y = I, X = Cl (7), Br (8), and I (9)). Moreover, 1–7 are isostructural (triclinic), while 8 and 9 are monoclinic. In all cases, halogen bonding plays an important role in formation of crystal packing. Moreover, 1–9 demonstrate luminescence in asolid state; for the best emitting complexes, quantum yield (QY) exceeds 21%.     

2D Organic Photonics: An Asymmetric Optical Waveguide in Self‐Assembled Halogen‐Bonded Cocrystals

Anisotropic organic molecular construction and packing are crucial for the optoelectronic properties of organic crystals. Two‐dimensional (2D) organic crystals with regular morphology and good photon confinement are potentially suitable for a chip‐scale planar photonics system. Herein, through the bottom‐up process, 2D halogen‐bonded DPEpe‐F₄DIB cocrystals were fabricated that exhibit an asymmetric optical waveguide with the optical‐loss coefficients of R_Backward=0.0346 dB μm^?1 and R_Forward=0.0894 dB μm^?1 along the [010] crystal direction, which can be attributed to the unidirectional total internal reflection caused by the anisotropic molecular packing mode. Based on this crystal direction‐oriented asymmetric photon transport, these as‐prepared 2D cocrystals have been demonstrated as a microscale optical logic gate with multiple input/out channels, which will offer potential applications as the 2D optical component for the integrated organic photonics.     

Facile Preparation of α‐Cyano‐α,ω‐Diaryloligovinylenes: A New Class of Color‐Tunable Solid Emitters

An efficient Knoevenagel condensation reaction was used to construct a series of α‐cyano‐α,ω‐diaryloligovinylenes, which show prominent fluorescence emission in the solid state. On investigating the effect of conjugation length on fluorescent properties, we found that the diene structure showed superior solid‐state luminescence. Furthermore, the emission color could be adjusted by introducing donor or acceptor functional groups at the terminal aryl groups. Full‐color emission in the visible region can be achieved by adding different functional groups to the α‐cyano‐α,ω‐diaryldivinylene moiety. The structure–property relationships were elucidated and some observations such as the substitution position effects were discussed. These compounds have potential applications as full‐color solid emissive candidates in material science and their simple structures allow them to be easily modified resulting in further interesting properties.     

Detection and separation of nucleoside-5'-monophosphates of DNA by conjugation with the fluorescent dye BODIPY and capillary electrophoresis with laser-induced fluorescence detection

We investigated the separation and detection of the 5'-monophosphates of 2'-deoxynucleosides selectively conjugated with 4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-propionyl ethylene diamine hydrochloride (BODIPY FL EDA) at the 5'-phosphate group using capillary electrophoresis with laser-induced fluorescence detection (CE-LIF). BODIPY conjugates of the four common deoxynucleoside-5'-monophosphates (2'-deoxyguanosine-5'-monophosphate, 2'-deoxyadenosine-5'-monophosphate, 2'-deoxycytidine-5'-monophosphate, and thymidine-5'-monophosphate) were prepared and subjected to CE-LIF to serve as standard compounds for peak assignment and to develop separation conditions for the analysis of DNA. BODIPY conjugates were detected and resolved by CE-LIF after digestion of DNA or an oligonucleotide to 5'-monophosphates by nuclease P1 (NP 1) and fluorescence labeling without further purification step. Comparative analyses of calf-thymus DNA digested either with micrococcal nuclease/spleen phosphodiesterase to 3'-monophosphates or with NP 1 to 5'-monophosphates showed that both versions of the fluorescence postlabeling assay were equally efficient and sensitive. Moreover, using the same assay, 2'-deoxyuridine and 2'-deoxy-5methylcytidine were identified in bisulfite treated DNA after NP 1 digestion indicating that fluorescence postlabeling of 2'-deoxyribonucleoside-5'-monophosphates with BODIPY FL EDA and detection by CE-LIF has the potential to determine DNA damage and genomic DNA methylation.     

Spatiotemporal Dynamics of Aggregation‐Induced Emission Enhancement Controlled by Optical Manipulation

We present spatiotemporal control of aggregation‐induced emission enhancement (AIEE) of a protonated tetraphenylethene derivative by optical manipulation. A single submicrometer‐sized aggregate is initially confined by laser irradiation when its fluorescence is hardly detectable. The continuous irradiation of the formed aggregate leads to sudden and rapid growth, resulting in bright yellow fluorescence emission. The fluorescence intensity at the peak wavelength of 540 nm is tremendously enhanced with growth, meaning that AIEE is activated by optical manipulation. Amazingly, the switching on/off of the activation of AIEE is arbitrarily controlled by alternating the laser power. This result means that optical manipulation increases the local concentration, which overcomes the electrostatic repulsion between the protonated molecules, namely, optical manipulation changes the aggregate structure. The dynamics and mechanism in AIEE controlled by optical manipulation will be discussed from the viewpoint of molecular conformation and association depending on the laser power.     

Solvent-free Synthesis of Flowable Carbon Clusters with Customizable Size and Tunable Optical Performance

We propose a rapid and solvent-flee route for synthesizing luminous carbon clusters by controlling carbonization of polyethylene glycol （PEG）. This approach does not involve solvents yet uses the precursor itself as suspend- ing medium, thus features mild and green chemistry, and also enables the formation of uniform-sized carbon clus- ters, of which the diameter can be easily tuned from 0.7 to 3.5 nm via control of reaction time. In term of the di- mension, the resultants are denoted as sub-nano carbon clusters （SNCs） and carbon dots （CDs）, respectively. Bene- fiting from surface anchored PEG segments, both of the two show favorable flowability at room temperature and excellent solubility in aqueous and organic solvents. Comparison of their optical performances and structures re- veals that they share the same chromophores. Particularly, the SNCs demonstrate robust photo- and pH-stable pho- toluminescence and can be directly applied to cell-imaging regarding to its prominent biocompatibility. Moreover, its quantum yield （5.5%）, which is approximately 3 times higher than that of CDs （1.5%）, can be dramatically en- hanced to 18.8% by facile chemical reduction. We anticipate that these PEG derivatives marked with easy synthesis, controllable optical performances and excellent physical properties will be highly appealing in future applications.     

Post-Synthetic Modification of Zr-based Metal-Organic Frameworks with Imidazole: Variable Optical Behavior and Sensing

UiO-66-NH₂-IM, a fluorescent metal-organic framework (MOF), was synthesized by post-synthetic modification of UiO-66-NH₂ with 2-imidazole carboxaldehyde via a Schiff base reaction. It was examined using various characterization techniques (PXRD, FTIR, NMR, SEM, TGA, UV-Vis DRS, and photoluminescence spectroscopy). The emissive feature of UiO-66-NH₂-IM was utilized to detect volatile organic compounds (VOCs), metal ions, and anions, such as acetone, Fe³⁺, and carbonate (CO₃²⁻). Acetone turns off the high luminescence of UiO-66-NH₂-IM in DMSO, with the limit of detection (LOD) being 3.6 ppm. Similarly, Fe³⁺ in an aqueous medium is detected at LOD=0.67 μM (0.04 ppm) via quenching. On the contrary, CO₃²⁻ in an aqueous medium significantly enhances the luminescence of UiO-66-NH₂-IM, which is detected with extremely high sensitivity (LOD=1.16 μM, i. e., 0.07 ppm). Large Stern-Volmer constant, K_sv, and low LOD values indicate excellent sensitivity of the post-synthetic MOF. Experimental data supported by density functional theory (DFT) calculations discern photo-induced electron transfer (PET), resonance energy transfer (RET), inner filter effect (IFE), or proton abstraction as putative sensing mechanisms. NMR and computational studies propose a proton abstraction mechanism for luminescence enhancement with CO₃²⁻. Moreover, the optical behavior of the post-synthetic material toward analytes is recyclable.     

ZnxCd1-xS纳米线的可控合成及其可调的光学性质

采用简单的气相沉积法,合成了不同组成的Zn_xCd_1-xS (0< x <1)纳米线. 利用扫描电子显微镜、透射电子显微镜和电子能谱研究了所制得的纳米线的表面形貌和组成. 该方法以Au为催化剂,简单控制起始物质的相对用量和沉积温度,可以获得可控的Zn/Cd 比例. X射线衍射结果表明所制得的Zn_xCd_1-xS纳米线具有纤维锌矿的单晶结构. 根据制得纳米线的表面形貌讨论了纳米线可能的生长机理为“底部生长”机理. 利用拉曼光谱和光致发光光谱研究了Zn_xCd_1-xS纳米线的光学性质,其纵向光学(LO)声子的拉曼位移频率随着组成的变化在ZnS和CdS的拉曼位移频率之间连续变化. 光致发光光谱中同时存在带边发光和缺陷发光. Zn_xCd_1-xS纳米线的带间跃迁的频率可随着组成的调节而调节,纳米线的禁带宽度介于ZnS (3.63 eV)和CdS (2.41 eV)的禁带宽度之间.