Ruthenium‐Catalyzed Allylation–Cyclization Reactions of Cyclic 1,3‐Dicarbonyl Compounds with 1‐Vinyl Propargyl Alcohols

Ruthenium‐catalyzed allylation–cyclization reactions of cyclic 1,3‐dicarbonyl compounds with 1‐vinyl propargyl alcohols that lead to diverse carbo‐ or heterocyclic products in a one‐pot cascade process are reported. These mechanistically distinct reactions are catalyzed by a single ruthenium(0) complex that contains a redox‐coupled dienone ligand. The reaction pathway strongly depends on the substrate substitution pattern, which determines the mode of activation of the 1‐vinyl propargyl alcohol. The environmentally benign process, which generates water as the only waste product, is of wide scope and allows the atom‐economic synthesis of highly functionalized furans, pyrans, and spirocarbocycles.     

Gold(I)‐Catalyzed Aminohalogenation of Fluorinated N′‐Aryl‐N‐Propargyl Amidines for the Synthesis of Imidazole Derivatives under Mild Conditions

A procedure for the synthesis of fluorinated imidazole derivatives from propargyl amidines has been developed. Under gold(I) catalysis, propargyl amidines were converted into 5‐fluoromethyl imidazoles in the presence of Selectfluor through a cascade cyclization/fluorination process. In contrast, imidazole‐5‐carbaldehydes were obtained in high yields when N‐iodosuccinimide (NIS) was used as the halogenating reagent. The polarity of the solvent and light had significant impact on the formation of the carbaldehydes. These transformations showed excellent functional‐group tolerance. An unfluorinated substrate with an electron‐withdrawing group also underwent aminohalogenation to give the corresponding product in good yield. Mechanistic investigation revealed the general pathways of these transformations.     

A convenient approach to β-heteroarylated (C-N bond) ketones from Cs2CO3 promoted reaction between propargyl alcohols and nitrogen-heterocycles

An efficient and direct approach to β-heteroarylated (C-N bond) ketones is demonstrated. Base promoted redox isomerization of propargyl alcohol to α,β-unsaturated ketone followed by conjugate addition to NH-heteroarenes affords a wide range of β-heteroarylated ketones in good to excellent yields. Aryl, heteroaryl, alkyl C(sp), and terminal alkynes containing unactivated propargyl alcohols effectively undergo redox-isomerization conjugate addition (RICA) with NH-heteroarenes. Reaction of 3-substituted pyrazoles or indazole with propargyl alcohols enables highly regioselective products. A diverse range of NH-bearing nucleophiles such as: pyrazoles, imidazole, triazoles, pyrrole, indoles and aniline participate in this reaction and deliver the corresponding β-heteroarylated ketones.     

Direct synthesis of terminally “clickable” linear and hyperbranched polyesters

1,3‐Dipolar cycloaddition of an organic azide and an acetylenic unit, often referred to as the “click reaction”, has become an important ligation tool both in the context of materials chemistry and biology. Thus, development of simple approaches to directly generate polymers that bear either an azide or an alkyne unit has gained considerable importance. We describe here a straightforward approach to directly prepare linear and hyperbranched polyesters that carry terminal propargyl groups. To achieve the former, we designed an AB‐type monomer that carries a hydroxyl group and a propargyl ester, which upon self‐condensation under standard transesterification conditions yielded a polyester that carries a single propargyl group at one of its chain‐ends. Similarly, an AB₂ type monomer that carries one hydroxyl group and two propargyl ester groups, when polymerized under the same conditions yielded a hyperbranched polymer with numerous “clickable” propargyl groups at its molecular periphery. These propargyl groups can be readily clicked with different organic azides, such as benzyl azide, ω‐azido heptaethyleneglycol monomethylether or 9‐azidomethyl anthracene. When an anthracene chromophore is clicked, the molecular weight of the linear polyester could be readily estimated using both UV–visible and fluorescence spectroscopic measurements. Furthermore, the reactive propargyl end group could also provide an opportunity to prepare block copolymers in the case of linear polyesters and to generate nanodimensional scaffolds to anchor a variety of functional units, in the case of the hyperbranched polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3200–3208, 2010     

Enantioselective synthesis of indenopyrazolopyrazolones enabled by dual directing groups-assisted and rhodium(III)-catalyzed tandem C-H alkenylation/[3 + 2] stepwise cycloaddition

The Cp^XRh(III)-catalyzed asymmetric cascade C-H coupling/intramolecular cyclization of azomethine imines with propargyl carbonates has been developed, affording a variety of chiral tetracyclic indenopyrazolopyrazolone frameworks with good substrate/functional group tolerance and enantioselectivity (up to 97:3 er). Combined experimental studies and DFT calculations revealed the Rh(III)-catalyzed stepwise annulation process and clarified the synergy coordination mode of dual directing groups in tuning the selectivity.     

Base-Selective Five- versus Six-Membered Ring Annulation in Palladium-Catalyzed C–C Coupling Cascade Reactions: New Access to Electron-Poor Polycyclic Aromatic Dicarboximides

Palladium-catalyzed base-selective annulation of dibromonaphthalimide to different aryl boronate esters by combined Suzuki–Miyaura cross-coupling and direct C−H arylation afforded a series of new five- and six-membered ring annulated electron-poor polycyclic aromatic hydrocarbons. Cesium carbonate (Cs₂CO₃) as auxiliary base in these C−C coupling cascade reactions led exclusively to six-membered ring annulation, while the use of organic base diazabicycloundecene (DBU) afforded the corresponding five-membered ring annulated products. This base-dependent selective mode of annulation is attributed to different mechanistic pathways directed by the applied base. The selective annulation was revealed by single crystal X-ray analysis of the respective five- and six-membered ring annulated products. The optical and redox properties of the new polycyclic aromatic dicarboximides were characterized by UV/Vis absorption and fluorescence spectroscopy and cyclic voltammetry.     

Remarkable tolerance of ethynyl steroids to air and water in microwave-assisted hydrophosphinylation: Reaction scope and limitations

The microwave-assisted hydrophosphinylation of propargyl alcohols has been investigated using group 9 catalysts under solvent-free conditions as well as with pure water, ethyl lactate, or THF as the solvent. Reactions involving simple propargyl alcohols gave mixtures containing significant amounts of elimination products. In contrast, analogous reactions involving ethynyl steroids afforded a single species with only trace amounts of elimination products. The molecular structures of several derivatives have been determined and are discussed.     

Chemoselective Oxidation of Benzyl,Amino, and Propargyl Alcohols to Aldehydes and Ketones under Mild Reaction Conditions

Catalytic oxidation reactions often suffer from drawbacks such as low yields and poor selectivity. Particularly, selective oxidation of alcohols becomes more difficult when a compound contains more than one oxidizable functional group. In order to deliver a methodology that addresses these issues, herein we report an efficient, aerobic, chemoselective and simplified approach to oxidize a broad range of benzyl and propargyl alcohols containing diverse functional groups to their corresponding aldehydes and ketones in excellent yields under mild reaction conditions. Optimal yields were obtained at room temperature using 1 mmol substrate, 10 mol % copper(I) iodide, 10 mol % 4-dimethylaminopyridine (DMAP), and 1 mol % 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) in acetonitrile, under an oxygen balloon. The catalytic system can be applied even when sensitive and oxidizable groups such as alkynes, amines, and phenols are present; starting materials and products containing such groups were found to be stable under the developed conditions.     

Three-Component Reaction for the Synthesis of Highly Functionalized Propargyl Ethers

Multicomponent reactions provide efficient means to access molecular complexity. Herein, we report a copper-catalyzed three-component reaction of diazo compounds, alcohols and ethynyl benziodoxole (EBX) reagents for the synthesis of propargyl ethers. Extensive variations of the three partners of the reaction is possible, leading to highly functionalized and structurally diverse products under mild conditions. Alkynylation of a copper ylide intermediate is postulated as key step for this transformation.     

Cyano‐Schmittel Cyclization through Base‐Induced Propargyl‐Allenyl Isomerization: Highly Modular Synthesis of Pyridine‐Fused Aromatic Derivatives

The cyano‐Schmittel cyclization of in situ‐generated cyano‐allenes has been carried out. The DFT calculation results suggest that the diradical pathway plays a major role in this cyclization. The reactions can be conveniently performed in a one‐pot manner through cascade Sonogashira coupling of terminal cyano‐ynes with organic halides, followed by base‐promoted propargyl‐allenyl isomerization/cyclization, leading to an efficient access to pyridine‐fused polycyclic architectures. In particular, a large variety of aryl or heteroaryl rings such as furans, thiophenes and pyridines can be incorporated into the follow‐up cyano‐Diels–Alder reactions, highlighting the great synthetic utility of this chemistry.     

Manganese/Cobalt Bimetallic Relay Catalysis for Divergent Dehydrogenative Difluoroalkylation of Alkenes

The involvement of manganese radical for halogen atom transfer (XAT) reactions has been esteemed as one reliable method but encountered with limited catalytic models. In this paper, a novel bimetallic relay catalysis of Mn₂(CO)₁₀ and cobaloxime has been developed for divergent dehydrogenative difluoroalkylation of alkenes using commercially available difluoroalkyl bromides. A wide range of structurally diverse terminal, cyclic and internal alkenes as well as tetrasubstituted alkenes are found to be good coupling partners to deliver difluoroalkylated allylic products and difluoromethylated cyclic products, accompanied with the production of H₂ as the by-product. This bimetallic relay strategy features broad substrate scope, mild reaction conditions and excellent functional group compatibility. Its success represents an important step-forward to expedite the construction of a rich library of difluoroalkylated products.     

Base‐Selective Five‐ versus Six‐Membered Ring Annulation in Palladium‐Catalyzed C–C Coupling Cascade Reactions: New Access to Electron‐Poor Polycyclic Aromatic Dicarboximides

Palladium‐catalyzed base‐selective annulation of dibromonaphthalimide to different aryl boronate esters by combined Suzuki–Miyaura cross‐coupling and direct C−H arylation afforded a series of new five‐ and six‐membered ring annulated electron‐poor polycyclic aromatic hydrocarbons. Cesium carbonate (Cs₂CO₃) as auxiliary base in these C−C coupling cascade reactions led exclusively to six‐membered ring annulation, while the use of organic base diazabicycloundecene (DBU) afforded the corresponding five‐membered ring annulated products. This base‐dependent selective mode of annulation is attributed to different mechanistic pathways directed by the applied base. The selective annulation was revealed by single crystal X‐ray analysis of the respective five‐ and six‐membered ring annulated products. The optical and redox properties of the new polycyclic aromatic dicarboximides were characterized by UV/Vis absorption and fluorescence spectroscopy and cyclic voltammetry.     

Additions of allenyl/propargyl organometallic reagents to 4-oxoazetidine-2-carbaldehydes: novel palladium-catalyzed domino reactions in allenynes

Metal-mediated carbonyl allenylation and propargylation of 4-oxoazetidine-2-carbaldehydes were investigated in aqueous environment. Different propargyl bromide and metal promoters showed varied regio- and stereoselectivities on product formation. In addition, an unprecedented one-pot stereoselective synthesis of beta-chlorinated allylic alcohols, which can also be considered as functionalized allylsilanes, has been developed, which involves tin(IV) chloride-mediated reaction of propargyltrimethylsilane and 4-oxoazetidine-2-carbaldehydes. Some of the resulting coupling products were submitted to transition metal catalyzed reactions, such as the allenic Pauson-Khand and palladium-catalyzed reactions, leading to novel fused or bridged tricyclic beta-lactams. Remarkably, a novel domino process, namely the allene cyclization/intramolecular Heck reaction was found. A likely mechanism for the cascade reaction should involve an intramolecular cyclization on a (pi-allyl)palladium complex and a Heck-type reaction.     

Ene-yne-ene and ene-yne-yne metathesis of norbornene derivatives

Norbornene derivatives 4 and 5 containing sidechains bearing an internal alkyne and either a terminal alkene or a terminal alkyne were found to undergo a cascade of metathesis reactions when treated with ruthenium based metathesis catalysts to form highly functionalised pentacyclic products. The reactions illustrate an interesting difference in reactivity between Grubbs’ catalyst and the second generation catalyst, with the former being more reactive for the early steps of the cascade.     

Dendritic oligothiophenes terminated with tris(alkyloxy)phenylethynyl tails: synthesis, physical properties, and self-assembly

Three-dimensional (3D) π-conjugated dendritic oligothiophenes up to a third generation have been functionalized with tris(decyloxy)phenylethynyl tails at the periphery. The first-generation compounds (3 T-p-Ph-C10 and 6 T-p-Ph-C10) were synthesized by palladium-catalyzed Sonogashira coupling reactions, whereas the higher generation products were synthesized by palladium-catalyzed Suzuki coupling reactions in a divergent approach. The optical and electrochemical properties were investigated by UV/Vis absorption, fluorescence spectroscopy, and cyclic voltammetry. The results revealed that the terminal tris(alkyloxy)phenylethynyl groups are conjugated to the branched oligothiophene core, yielding redshifted absorption and fluorescence spectra and reduced optical band gaps relative to the dendritic oligothiophene core. A structural study revealed a close relationship between the type of supramolecular organization and the size of the oligothiophene core. The first-generation compounds 3 T-p-Ph-C10 and 6 T-p-Ph-C10 displayed columnar phases in the bulk state, which was confirmed by two-dimensional wide-angle X-ray scattering (2D WAXS) measurements. The self-assembly into columnar stacks has mainly been attributed to phase separation between the rigid thiophene cores and the flexible side-chains assisted by minor π-stacking interactions between the conjugated dendritic oligothiophene units. The high-generation compounds, however, showed less ordered structures in the solid state.     

Pd‐Colloids‐Catalyzed/Ag2O‐Oxidized General and Selective Esterification of Benzylic Alcohols

Palladium colloids obtained from the degradation of Hermann–Beller palladacycle proved to be an efficient catalytic system in combination with silver oxide as a selective oxidant for the oxidative esterification of differently substituted benzyl alcohols in MeOH as solvent. Excellent reactivity exhibited by the catalytic system also allowed the alcoholic coupling partner to be changed from MeOH to a wide range of alcohols having diverse functionalities. The mildness of the developed protocol also made it possible to employ propargyl alcohol as the coupling partner without any observation of any interference of the terminal alkyne. Selective oxidative coupling of a primary alcoholic functional group over secondary in the case of glycols and glycerols was also made possible using the developed catalyst system. To test the relevancy of Pd/Ag combined catalysis mixed Pd/Ag colloids were synthesized, characterized by TEM, XRD and XPS and applied to oxidative‐esterification successfully.     

Synthesis of Highly Substituted γ‐Butyrolactones by a Gold‐Catalyzed Cascade Reaction of Benzyl Esters

Easily accessible benzylic esters of 3‐butynoic acids in a gold‐catalyzed cyclization/rearrangement cascade reaction provided 3‐propargyl γ‐butyrolactones with the alkene and the carbonyl group not being conjugated. Crossover experiments showed that the formation of the new C?C bond is an intermolecular process. Initially propargylic–benzylic esters were used, but alkyl‐substituted benzylic esters worked equally well. In the case of the propargylic–benzylic products, a simple treatment of the products with aluminum oxide initiated a twofold tautomerization to the allenyl‐substituted γ‐butyrolactones with conjugation of the carbonyl group, the olefin, and the allene. The synthetic sequence can be conducted stepwise or as a one‐pot cascade reaction with similar yields. Even in the presence of the gold catalyst the new allene remains intact.     

Aryl methyl sulfides as substrates for rhodium-catalyzed alkyne carbothiolation: arene functionalization with activating group recycling

A Rh(I)-catalyzed method for the efficient functionalization of arenes is reported. Aryl methyl sulfides are combined with terminal alkynes to deliver products of carbothiolation. The overall process results in reincorporation of the original arene functional group, a methyl sulfide, into the products as an alkenyl sulfide. The carbothiolation process can be combined with an initial Rh(I)-catalyzed alkene or alkyne hydroacylation reaction in three-component cascade sequences. The utility of the alkenyl sulfide products is also demonstrated in simple carbo- and heterocycle-forming processes. We also provide mechanistic evidence for the course of this new process.     

UV-absorption spectra of the radical transients generated from the 193-nm photolysis of allene, propyne, and 2-butyne

The 193-nm photochemistry of allene (H2C=C=CH2), propyne (H3C-C[triple bond]CH), and 2-butyne (H3C-C[triple bond]C-CH3) has been examined, and the UV spectral region between 220 and 350 nm has been surveyed for UV-absorption detection of transient species generated from the photolysis of these molecules. Time-resolved UV-absorption spectroscopy was used for detection of transient absorption. Gas chromatographic/mass spectroscopic (GC/MS) analysis of the photolyzed samples were employed for identification of the final photodissociation products. An emphasis of the study has been on the examination of possibilities of formation of different C3H3 isomeric radicals, that is, propargyl (H2CCCH) or propynyl (H3CCC), from the 193-nm photolysis of these molecules. Survey of the UV spectral region, following the 193-nm photolysis of dilute mixtures of allene/He resulted in detection of a strong absorption band around 230 nm and a weaker band in the 320-nm region with a relative intensity of about 8:1. The time-resolved absorption traces after the photolysis event show an instantaneous rise, followed by a simple decay. The spectral features, observed in this work, following 193-nm photolysis of allene are in good agreement with the previously reported spectrum of H2CCCH radical in the 240- and 320-nm regions and are believed to originate primarily from propargyl radicals. In comparison, the spectra obtained from the 193-nm photolysis of dilute mixtures of HCCCH3/He and CH3CCCH3/He were nearly identical, consisting of two relatively broad bands centered at about 240- and 320-nm regions with a relative intensity of about 2:1, respectively. In addition, the time-resolved absorption traces after photolysis of propyne and 2-butyne samples, both in the 240 and 320 nm regions, indicated an instant rise followed by an additional slower absorption rise. The distinct differences between the results of allene with those of propyne and 2-butyne suggest the observed absorption features following 193-nm photolysis of these molecules are likely to be composite with contributions from a number of transient species other than propargyl radicals. Propyne and 2-butyne are structurally similar. The methyl (CH3) and propynyl (CH3C[triple bond]C) radicals are likely to be among the photodissociation products of 2-butyne, and similarly, propynyl is likely to be a photodissociation product of propyne. GC/MS product analysis of photolyzed 2-butyne/He mixtures indicates the formation of C2H6 (formed from the combination of CH3 radicals), and a number of C6H6 and C4H6 isomers formed from self- and cross reactions of C3H3 and CH3 radicals, including 1,5-hexadiyne and 2,4-hexadyine, that are potential products of combination reactions of propargyl as well as propynyl radicals.     

Intramolecular Vinyl Radical Cyclization Reactions of cyclohexadienes derived from sequential additions to (arene)(tricarbonyl)chromium complexes. Preliminary communication

Cyclohexa-1,3-dienes 7–10 with a 1,5,6-substitution pattern were prepared in a one-pot reaction sequence by sequential addition of MeLi and propargyl bromides to the tricarbonylchromium complex 1a . These products were subjected to radical cyclization procedures. Vinyl radical generation by Bu₃Sn addition to the propargyl group in 7–10 was followed by regio- and diastereoselective intramolecular ring closure. Two different 5-exo-trig cyclizations are possible via different vinyl radical intermediates and cyclization to one or the other of the termini of the cyclohexadiene moiety. Internal alkynes reacted to yield exclusively the cis-fused hexahydroindene products 12–14 , whereas the terminal alkyne yielded bicyclo[3.2.1]octenes 11 as sole products.