Phthalocyanine–C60 Fused Conjugates Exhibiting Molecular Orbital Interactions Depending on the Solvent Polarity

New covalently C₆₀‐connected zinc phthalocyanine (ZnPc) derivatives have been synthesized by utilizing successive cycloaddition reactions of C₆₀ with a ZnPc derivative containing a pyridazine moiety employing Komatsu’s method in reaction of C₆₀ with phthalazine. The UV/Vis absorption spectrum of the fused conjugate ( 5 ) shows red shifts from the corresponding absorption of ZnPc derivative ( 8 ), indicating interactions between the ZnPc and C₆₀ moieties. The DFT calculations under non‐polar medium predict that the HOMO and LUMO of 5 localize on the ZnPc moiety, whereas LUMO+1 localizes on the C₆₀ moiety, which reasonably explain the magnetic circular dichroism (MCD) and absorption spectra in toluene. Electrochemical redox potentials of 5 in polar solvents indicate the first‐oxidation potential arises from the ZnPc moiety, whereas the first reduction potential is associated with the C₆₀ moiety, suggesting the LUMO localizes on the C₆₀ moiety in polar solvent. This reversal of the LUMO is supported by the ZnPc‐fluorescence quenching with a nearby C₆₀ moiety in benzonitrile, which leads to the charge‐separation via the excited singlet state of the ZnPc moiety. In toluene on the other hand, such a ZnPc‐fluorescence quenching owing to the photoinduced charge separation is not observed as predicted by the DFT‐calculated LUMO on the ZnPc moiety.     

Investigating pyridazine and phthalazine exchange in a series of iridium complexes in order to define their role in the catalytic transfer of magnetisation from para-hydrogen

The reaction of [Ir(IMes)(COD)Cl], [IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene, COD = 1,5-cyclooctadiene] with pyridazine (pdz) and phthalazine (phth) results in the formation of [Ir(COD)(IMes)(pdz)]Cl and [Ir(COD)(IMes)(phth)]Cl. These two complexes are shown by nuclear magnetic resonance (NMR) studies to undergo a haptotropic shift which interchanges pairs of protons within the bound ligands. When these complexes are exposed to hydrogen, they react to form [Ir(H)₂(COD)(IMes)(pdz)]Cl and [Ir(H)₂(COD)(IMes)(phth)]Cl, respectively, which ultimately convert to [Ir(H)₂(IMes)(pdz)₃]Cl and [Ir(H)₂(IMes)(phth)₃]Cl, as the COD is hydrogenated to form cyclooctane. These two dihydride complexes are shown, by NMR, to undergo both full N-heterocycle dissociation and a haptotropic shift, the rates of which are affected by both steric interactions and free ligand pK_a values. The use of these complexes as catalysts in the transfer of polarisation from para-hydrogen to pyridazine and phthalazine via signal amplification by reversible exchange (SABRE) is explored. The possible future use of drugs which contain pyridazine and phthalazine motifs as in vivo or clinical magnetic resonance imaging probes is demonstrated; a range of NMR and phantom-based MRI measurements are reported.     

Synthesis and properties of novel poly(arylene ether)s and poly(arylene thioether)s based on a pyridazine biphenol or a phthalazine biphenol

Novel sulfur‐containing biphenol monomers were prepared in high yields by the reaction of 4‐mercaptophenol with chloropyridazine or chlorophthalazine compounds. High‐molecular‐weight poly(arylene ether)s were synthesized by a nucleophilic substitution reaction between these sulfur‐containing monomers and activated difluoro aromatic compounds. The inherent viscosities of these polymers ranged from 0.34 to 0.93 dL/g. The poly(pyridazine)s exhibited glass‐transition temperatures greater than 165 °C. The poly(phthalazine)s showed higher glass‐transition temperatures than the poly(pyridazine)s. A polymer synthesized from a bisphthalazinebiphenol and bis(4‐fluorophenyl)sulfone had the highest glass‐transition temperature (240 °C). The thermal stabilities of the poly(pyridazine)s and poly(phthalazine)s showed similar patterns of decomposition, with no significant weight loss below 390 °C. The poly(phthalazine)s were soluble in chlorinated solvents such as chloroform, and the poly(pyridazine)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(pyridazine)s and poly(phthalazine)s could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 262–268, 2007     

Synthesis of 5-azaindolizine derivatives by the palladium-catalyzed intermolecular formal [3+2] cycloaddition of alkylidenecyclopropanes with 1,2-diazines

The palladium-catalyzed formal [3+2] cycloaddition reaction of alkylidenecyclopropanes with 1,2-diazines proceeded smoothly to give the corresponding 5-azaindolizine derivatives in good to allowable yields. For example, in the presence of 5 mol % of Pd(PPh(3))(4), the reaction of 1-propylhexylidenecyclopropane with phthalazine or with pyridazine proceeded at 120 degrees C without solvent, and the corresponding 2-(1-butylpentyl)pyrrolo[2,1-a]phthalazine or 6-(1-butylpentyl)pyrrolo[1,2-b]pyridazine was obtained in 61% or 49% yield, respectively.     

Synthesis of [60]fullerene-functionalized rotaxanes

Synthesis of [60]fullerene (C₆₀)-functionalized rotaxanes via Diels-Alder reactions with C₆₀ is described. Diels-Alder reaction of C₆₀ and sulfolene moiety as masked diene attached on the wheels of rotaxanes results in high yields of C₆₀ incorporation. Rotaxanes are prepared by tin-catalyzed urethane-forming end-capping reaction with isocyanate of pseudorotaxane having the wheel carrying C₆₀ functionality as introduced by the Diels-Alder reaction. The Diels-Alder reaction was accomplished as end-capping reaction between C₆₀ and pseudorotaxane bearing sultine moiety as masked diene on the axle terminal. A variety of C₆₀-containing [2]rotaxanes was prepared in moderate to good yields by these Diels-Alder protocols.     

Pyridazines. LXXXIV. Studies on borohydride reduction of pyridazine compounds

Imidazo[1,2-b]pyridazine, s-triazolo[4,3-b]pyridazine and tetrazolo[1,5-b]pyridazine and some derivatives thereof were reduced with sodium borohydride to give the corresponding 5,6,7,8-tetrahydro derivatives. A mechanism for these reductions is proposed and reduction at the C₇-C₈ bond occurs before the reduction of the C₆? N₅ bond. Substituents at position 7 and/or 8 cause a significant decrease in the extent of reduction or lead to a 5,6-dihydro derivative by competitive attack at the 6 position.     

Thermal Decomposition Reactions for the Exploration of New Coordination Polymers based on Mn(NCS)2 and Pyridazine

Reaction of different ratios of manganese(II) thiocyanate with pyridazine in water at room temperature leads always to the formation of the pyridazine‐rich 1:4 compound (1:4 = ratio between metal and neutral co‐ligand) Mn(NCS)₂(pyridazine)₄ ( 1 ). In the crystal structure of 1 , the Mn²⁺ cations are coordinated by two nitrogen atoms of terminal N‐bonded thiocyanato anions and four nitrogen atoms of pyridazine ligands within slightly distorted octahedra. However, in one reaction single crystals of the new compound Mn₃(NCS)₆(pyridazine)₄(H₂O) · (pyridazine) ( 2 ) were obtained. In its crystal structure the manganese atoms are linked into chains by µ‐1, 3 and µ‐1, 1 bridging thiocyanato anions as well as bridging pyridazine ligands. Heating rate dependent DTA‐TG measurements of 1 reveal a multi‐step thermal decomposition, in which three new pyridazine‐deficient compounds of composition Mn(NCS)₂(pyridazine)₃ ( 3 ), Mn(NCS)₂(pyridazine)₂ ( 4 ) and Mn(NCS)₂(pyridazine) ( 5‐Mn ) are formed. IR‐spectroscopic investigations indicate that on heating more condensed coordination networks with µ‐1, 3‐ and µ‐1, 1‐bridging thiocyanato anions has formed. Magnetic measurements show only Curie‐Weiss paramagnetism for compounds 1 , 3 and 4 , whereas in the 1:1 compound 5 an antiferromagnetic ordering is observed at T_N = 14 K. Surprisingly, the most pyridazine deficient compound 5 transforms into 2 after storage for several weeks.     

Computer modeling of C2 cluster addition to fullerene C60

The reaction between C₂ cluster and C₆₀ fullerene resulting in C₂ insertion to C₆₀ with formation of closed C₆₂ cage (reaction of C₂ ingestion by C₆₀) was investigated by the semiempirical MNDO‐PM3 method. The geometries and energies of extremal points on the C₆₂ potential energy surface were calculated. Several reaction pathways leading to the formation of three different closed C₆₂ fullerenes were investigated. All insertion reactions proceed stepwise through intermediate adducts of different structures. The main reaction pathways were found to be addition of C₂ by its one side to the 6,6‐ or 5,6‐bond of C₆₀ with formation of primary unclosed C₆₂ adducts of “ball‐with‐fork” structures, lying in deep potential wells. Back reaction of C₂ detachment from primary adducts can compete with that of their transformation to the closed C₆₂ cages inasmuch as calculated activation barriers of the both reactions are comparable. Model calculations at the B3LYP/6‐31G* level, using C₃₂H₁₂ semisphere instead of C₆₀, confirmed the conclusion about two competitive pathways of the primary adducts transformation, C₂ detachment, and C₂ ingestion. The concerted insertion of C₂ to C₆₀ was realized only in the case of severe restrictions on starting geometry of the C₂ + C₆₀ system. The results of calculations explain recent experimental data on the formation of metastable adducts upon addition of C₂ to C₆₀, obtained using the time‐of‐flight mass spectrometer with laser desorption. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

A novel and convenient strategy for the synthesis of phthalazines from an aryne precursor

A novel three-step entry toward phthalazine derivatives has been elaborated. A strategy based on a sequential acyl-alkylation/diazo transfer reaction/Diaza-Wittig reaction led to the desired analogues in moderate to good yields from an aryne precursor. Various aryl groups were introduced on the annulated pyridazine, moreover the presence of an ester group allows further modifications.     

Reactivity of acyl chloride aryl-hydrazones with some diazines

The reaction of methyl phenylhydrazonochloroacetate with pyridazine, pyrazine, quinoxaline and phthalazine gave the corresponding 1:1 cycloadducts (1–4) whose structure was proven by spectroscopic data and chemical transformations.     

Isomeric maleic anhydride adducts of phthalazine and pyridazine and their partial stereochemistry

The addition of maleic anhydride to phthalazine is confirmed to form a five-membered pyrrolidino ring fusion to phthalazine VI, rather than a pyridophthalazine II, by means of synthetic and degradative experiments, and proton and carbon-13 nmr. Two of probable three isomers obtained have been isolated and the stereochemistry partially established. Comparison of the data obtained for this adduct with the data obtained for the adduct of maleic anhydride with pyridazine demonstrates that it too possesses the pyrrolidino ring fusion. Electron impact fragmentations of the two adducts are compared and are related to the breakdown of 1H,2H-pyridazinone.     

Reactivity of Highly Lewis‐Acidic Diborane(4) toward C≡N and N=N Bonds: Uncatalyzed Addition and N=N Bond‐Cleavage Reactions

The diboration of the C≡N bond in organic nitriles, and the N=N bond in azobenzene and pyridazine, by the highly Lewis‐acidic tetra(o‐tolyl)diborane(4) are reported. In the reactions with nitriles, azobenzene, and pyridazine, the addition of diborane(4) to the C≡N and N=N bonds was observed. Conversely, the N=N bond in phthalazine was cleaved by an addition/rearomatization sequence.     

Theoretical studies of C60/C70 fullerene derivatives: C60O and C70O

A semiempirical (AM1) calculation on the structures and stabilities of isomers of the fullerene derivatives C₆₀O and C₇₀O is carried out. The ozonolysis reaction mechanism and the thermodynamics of the compounds are studied. The two isomers of C₆₀O (56 bond and 66 bond) formed by an oxygen atom bridging across a C-C bond have an epoxide-like or an annulene-like structure. According to the ozonolysis reaction mechanism and kinetic factor analysis, the possible products of this ozonolysis reaction are C₆₀O with oxygen bridging over the 66 bond (C_2v) as an epoxide-like isomer and that with oxygen bridging over the 56 bond (C_s) as an annulene-like isomer. Further, the sixteen isomers of C₇₀O (both epoxide-like and annulene-like structures) have been studied with respect to the same reaction mechanism. The most possible product in this ozonolysis reaction contains oxygen bridging across in the upper part (66 bond in C₇₀O-2 or C₇₀O-4) as an epoxide-like structure. The other possible product is C₇₀O-8 (annulene-like structure), in which oxygen bridges across an broken equatorial CC bond in C₇₀ (D_5h). The vibrational frequency analysis and the electronic structure of the selected C₆₀O and C₇₀O isomers are generated for experimental characterisation. The experimental results indicate that C₆₀O and C₇₀O may decompose into the odd number fullerenes C₅₉ and C₆₉. We therefore studied the structures of C₅₉ and C₆₉ also.     

Highly phenylated poly(aryl ether phthalazine)s

Two series of novel amorphous poly(aryl ether phthalazine)s have been prepared via an intramolecular ring closure reaction of poly(aryl ether ketone)s (PAEKs) with hydrazine monohydrate. Fluorinated PAEKs, which display solubility in solvents incorporating a ketone functionality such as acetone or ethyl acetate, were converted to poly(aryl ether phthalazine)s to observe if these polymers would display similar solubility characteristics. The poly(aryl ether phthalazine)s have glass transition temperatures in the range of 278–320°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. The fluorinated poly(aryl ether phthalazine)s were not soluble in ketonic solvents. A series of poly(aryl ether phthalazine)s incorporating pendant 2-naphthalenyl moieties has been prepared in an attempt to produce amorphous, thermally stable polymers with high glass transition temperatures. The polymers have glass transition temperatures in the range of 287–334°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. Poly(aryl ether phthalazine)s undergo an exothermic reaction above the glass transition temperature. The major product of this reaction is a rearrangement of the phthalazine moieties to quiazoline moieties, however some crosslinking of the polymers occurs. Cured samples of the poly(aryl ether phthalazine)s show a small increase in the polymer T_g and are insoluble in all solvents tested. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1897–1905, 1996     

Structure of Pyridazine in the S1 State: Experiment and Theory

The molecular structure of pyridazine in the first electronically excited state (S₁) is deduced from the combined use of resonance‐enhanced two‐photon ionization and mass‐analyzed threshold ionization spectroscopic methods. The equation‐of‐motion coupled‐cluster single and double (EOM–CCSD) calculation gives the distorted planar geometry for the most stable structure of the S₁ pyridazine. The symmetry constraint of C_2v is relaxed to that of C_s, and consequently many in‐plane vibrational modes are found to be optically active in both S₁–S₀ and D₀–S₁ excitation spectra, being appropriately assigned from the comparison of their frequencies with ab initio values. This indicates that the S₁–S₀ excitation is partially localized, and provides an alternative explanation for the long‐standing spectroscopic puzzle in S₁ pyridazine.     

Preparation and Properties of C60-Polysiloxane Hybrids

C₆₀-polysiloxane hybrids were prepared by the reaction of triethoxysilylated C₆₀ (TES-C₆₀) with methylpolysiloxane (MPS) or , -dihydroxypolydimethylsiloxane (STPDS). TES-C₆₀ was synthesized by hydrosilylation using triethoxysilane and C₆₀ in the presence of chloroplatinic acid. TES-C₆₀ was mixed with MPS and heated to provide a bulk body of C₆₀ containing polysiloxane hybrid in a Si/C₆₀ molar ratio of 1000:500. The formation of this hybrid is based on the hydrolytic polycondensation of TES-C₆₀ and MPS to fix C₆₀ into the silica matrix by a chemical bond. TES-C₆₀ and STPDS also provide an isolatable thin film of C₆₀ containing polysiloxane hybrid by an ethanol-forming condensation reaction. Because no gelation was observed when only STPDS was aged, it is thought that TES-C₆₀ serves as a cross-linking point in gel formation.     

Hydrogen‐bonded structures of the isomeric compounds of phthalazine with 3‐chloro‐2‐nitrobenzoic acid, 4‐chloro‐2‐nitrobenzoic acid and 4‐chloro‐3‐nitrobenzoic acid

The structures of three isomeric compounds, C₇H₄ClNO₄·C₈H₆N₂, of phthalazine with chloro‐ and nitro‐substituted benzoic acid, namely, 3‐chloro‐2‐nitrobenzoic acid–phthalazine (1/1), (I), 4‐chloro‐2‐nitrobenzoic acid–phthalazine (1/1), (II), and 4‐chloro‐3‐nitrobenzoic acid–phthalazine (1/1), (III), have been determined at 190 K. In the asymmetric unit of each compound, there are two crystallographically independent chloronitrobenzoic acid–phthalazine units, in each of which the two components are held together by a short hydrogen bond between an N atom of the base and a carboxyl O atom. In one hydrogen‐bonded unit of (I) and in two units of (II), a weak C—H...O interaction is also observed between the two components. The N...O distances are 2.5715 (15) and 2.5397 (17) Å for (I), 2.5655 (13) and 2.6081 (13) Å for (II), and 2.613 (2) and 2.589 (2) Å for (III). In both hydrogen‐bonded units of (I) and (II), the H atoms are each disordered over two positions with (N site):(O site) occupancies of 0.35 (3):0.65 (3) and 0.31 (3):0.69 (3) for (I), and 0.32 (3):0.68 (3) and 0.30 (3):0.70 (3) for (II). The H atoms in the hydrogen‐bonded units of (III) are located at the O‐atom sites.     

Self‐Assembly of Fullerene‐Based Janus Particles in Solution: Effects of Molecular Architecture and Solvent

Two molecular Janus particles based on amphiphilic [60]fullerene (C₆₀) derivatives were designed and synthesized by using the regioselective Bingel–Hirsh reaction and the click reaction. These particles contain carboxylic acid functional groups, a hydrophilic fullerene (AC₆₀), and a hydrophobic C₆₀ in different ratios and have distinct molecular architectures: 1:1 (AC₆₀–C₆₀) and 1:2 (AC₆₀–2C₆₀). These molecular Janus particles can self‐assemble in solution to form aggregates with various types of micellar morphology. Whereas vesicular morphology was observed for both AC₆₀–C₆₀ and AC₆₀–2C₆₀ in tetrahydrofuran, in a mixture of N,N‐dimethylformamide (DMF)/water, spherical micelles and cylindrical micelles were observed for AC₆₀–C₆₀ and AC₆₀–2C₆₀, respectively. A mechanism of formation was tentatively proposed based on the effects of molecular architecture and solvent polarity on self‐assembly.     

Synthesis and characterization of C60/polyaniline composites from interfacial polymerization

C₆₀/polyaniline (PANI) nanocomposites have been synthesized by the oxidative polymerization of aniline with ammonium peroxydisulfate in the presence of C₆₀ by using an interfacial reaction. When compared with the pure PANI nanofibers from the similar process, the diameter of the obtained C₆₀/PANI nanofibers was increased because of the encapsulation of C₆₀ into PANI during aniline polymerization, which resulted from the charge‐transfer interactions between C₆₀ and aniline fragment in PANI. In addition, the resulting C₆₀/PANI nanocomposites synthesized from the low initial C₆₀/aniline molar ratio (less than 1:25) showed the homogenous morphology composed of fiber network structures, which has an electrical conductivity as high as 1.1 × 10^?4 S/cm. However, the C₆₀/PANI nanocomposites from the higher initial C₆₀/aniline molar ratio (more than 1:15) showed the nonuniformly distributed morphology, and the electrical conductivity was decreased to 3.5 × 10^?5 S/cm. Moreover, the C₆₀/PANI nanocomposites from the interfacial reaction showed a higher value of electrical conductivity than the mechanically mixed C₆₀/PANI blends with the same C₆₀ content, because of the more evenly distributed microstructures. FTIR, UV–vis, and CV data confirmed the presence of C₆₀ and the significant charge‐transfer interactions in the resultant nanocomposites, which was responsible for the morphology development of the C₆₀/PANI and the variation of the electrical conductivity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

3,6‐Di­chloro‐4‐[2‐(4‐thia­morpholino)­ethanesulfanyl]­pyridazine and 3,6‐bis­(pyrazol‐1‐yl)‐4‐[2‐(4‐thia­mor­pho­lino)­ethanesulfanyl]­pyridazine

The trans–trans conformations adopted by the derivatized bis­(bidentate) chelating N₄‐donor ligand 3,6‐bis­(pyrazol‐1‐yl)‐4‐[2‐(4‐thia­morpholino)­ethanesulfanyl]­pyridazine, C₁₆H₁₉N₇S₂, and an intermediate in its formation, 3,6‐di­chloro‐4‐[2‐(4‐thia­morpholino)­ethanesulfanyl]­pyridazine, C₁₀H₁₃Cl₂N₃S₂, con­trast with the cis–cis conformation found previously for 3,6‐bis­(thio­phen‐2‐yl)­pyridazine [Ackers, Blake, Hill & Hubberstey (2002). Acta Cryst. C 58 , o640–o641], which places all four heteroatoms on the same side of the mol­ecule.