微米级SiO合成多孔氧化硅/硅/碳储锂复合材料

以微米级SiO为原料,通过简单的高温煅烧、碳包覆和酸刻蚀制备多孔氧化硅/硅/碳复合材料,复合材料比表面积和平均孔径分别为32.9 m~2/g和3 nm。纳米硅分散在缓冲介质氧化硅多孔体系中,表面包覆一层薄而均匀的碳层。所得的复合材料具有较好的循环稳定性,在0.3 m A/g下,50次循环后可逆容量保持在645.1 m A·h/g。多孔结构、氧化硅缓解了硅在脱嵌锂过程的体积膨胀,碳层提高了复合材料的导电性和结构稳定性。     

Facile Synthesis of Porous Mn2O3 Nanoplates and Their Electrochemical Behavior as Anode Materials for Lithium Ion Batteries

Porous Mn₂O₃ nanoplates were prepared by a facile polyol solution method combined with a simple post‐annealing process. The porous Mn₂O₃ nanoplates were characterized by XRD, field‐emission SEM, high‐resolution TEM, and N₂ adsorption/desorption isotherm measurements. The formation process for the Mn₂O₃ nanoplates was proposed as a morphology‐conserved transformation strategy. These porous nanoplates exhibited improved electrochemical performance with excellent cycling stability and good rate capability when applied as anode materials in lithium ion batteries.     

锂离子电池硅基复合物负极材料*

作为颇有前途的锂离子电池负极材料,硅基材料的研究日益受到重视。硅基负极材料在充放电循环中体积变化过大导致的循环性能差、首次库仑效率低等始终是阻碍其商业化的主要问题。纳米化、合金化和碳包覆是有效的解决措施。本文详细论述了TiB2、TiN、TiC作为基质的硅-化合物复合物,Fe-Si、Cu-Si、Ni-Si体系的硅-金属复合物和硅-碳复合物的研究进展。在硅-碳复合物的研究上,综述了分别采用热解法、球磨法、球磨-热解法、化学聚合法合成,以聚吡咯、聚氯乙烯、聚丙烯腈、间苯二酚-甲醛、柠檬酸、环氧树脂等为碳源的研究进展,同时也综述了Si/碳纳米管复合电极材料的研究情况。     

从SiCl4合成多孔硅/碳复合材料及储锂性能研究

以Li₁₃Si₄和SiCl₄为原料,通过简单的机械球磨法合成多孔硅/碳复合材料,通过控制Li₁₃Si₄颗粒的尺寸可以有效调节产物的比表面积。分别研究了包覆碳含量、多孔硅/SuperP(导电碳)比表面积以及极片活性物质负载量对多孔硅/碳复合材料电化学性能的影响。结果表明:多孔硅/SuperP比表面积为100.9m₂·g^-1,化学气相沉积(CVD)包覆碳含量为25.3wt%(约6nm厚)的复合材料具有最高的电化学活性,在300mA·g^-1的电流密度下,循环可逆比容量达到1900mAh·g^-1,50次循环后容量仅衰减7.6%。     

从SiCl4合成多孔硅/碳复合材料及储锂性能研究

以Li13Si4和SiCl4为原料,通过简单的机械球磨法合成多孔硅/碳复合材料,通过控制Li13Si4颗粒的尺寸可以有效调节产物的比表面积。分别研究了包覆碳含量、多孔硅/Super P(导电碳)比表面积以及极片活性物质负载量对多孔硅/碳复合材料电化学性能的影响。结果表明:多孔硅/Super P比表面积为100.9 m2·g-1,化学气相沉积(CVD)包覆碳含量为25.3wt%(约6 nm厚)的复合材料具有最高的电化学活性,在300 mA·g-1的电流密度下,循环可逆比容量达到1 900 mAh·g-1,50次循环后容量仅衰减7.6%。     

纳米锡/硬碳复合材料作为嵌锂负极的研究

利用金属铁和钴纳米颗粒的催化活化作用,制备了多孔硬碳球.应用聚焦离子束切割技术,观察到扩孔后的硬碳球中充满彼此连通的发达中孔.在此多孔硬碳球中填入纳米锡(Sn)颗粒,对复合材料的电化学性能进行了测试.     

锂离子电池锡-金属-碳复合负极材料

石墨作为锂离子电池的负极材料已经使用了很长时间。但由于其嵌锂容量低,已不能满足动力电池快速发展的需求。而锡可以与锂形成合金,有可能取代石墨成为下一代锂离子电池负极材料。但是单纯的金属锡在电池循环过程中发生巨大的体积变化,容易导致电极材料的粉化。而碳材料具有较高的导电性,良好的机械性能和储锂性能。为了充分发挥金属锡和碳材料的优势,锡-碳(Sn-C)复合材料得到了广泛研究。本文详细介绍了无定型碳、石墨(G)、石墨烯(GP)、碳纳米管(CNT)、碳纳米纤维(CNF)等碳材料作为惰性的导电基体与锡形成的二元复合物,阐述了锡与其它金属(M)形成的碳基三元、多元复合物的结构和性能。通过总结近些年对锡碳复合物结构与性能的研究,相信多元复合和多种结构的应用是提高锡-碳复合负极材料的关键。其中,以Sn-Co-C为基础的多元复合负极材料最有可能走向市场应用。     

Scalable Synthesis of Interconnected Porous Silicon/Carbon Composites by the Rochow Reaction as High‐Performance Anodes of Lithium Ion Batteries

Despite the promising application of porous Si‐based anodes in future Li ion batteries, the large‐scale synthesis of these materials is still a great challenge. A scalable synthesis of porous Si materials is presented by the Rochow reaction, which is commonly used to produce organosilane monomers for synthesizing organosilane products in chemical industry. Commercial Si microparticles reacted with gas CH₃Cl over various Cu‐based catalyst particles to substantially create macropores within the unreacted Si accompanying with carbon deposition to generate porous Si/C composites. Taking advantage of the interconnected porous structure and conductive carbon‐coated layer after simple post treatment, these composites as anodes exhibit high reversible capacity and long cycle life. It is expected that by integrating the organosilane synthesis process and controlling reaction conditions, the manufacture of porous Si‐based anodes on an industrial scale is highly possible.     

Electrospun Hierarchical CaCo2O4 Nanofibers with Excellent Lithium Storage Properties

Hierarchical CaCo₂O₄ nanofibers (denoted as CCO‐NFs) with a unique hierarchical structure have been prepared by a facile electrospinning method and subsequent calcination in air. The as‐prepared CCO‐NFs are composed of well‐defined ultrathin nanoplates that arrange themselves in an oriented manner to form one‐dimensional (1D) hierarchical structures. The controllable formation process and possible formation mechanism are also discussed. Moreover, as a demonstration of the functional properties of such hierarchical architecture, the 1D hierarchical CCO‐NFs were investigated as materials for lithium‐ion batteries (LIBs) anode; they not only delivers a high reversible capacity of 650 mAh g^?1 at a current of 100 mA g^?1 and with 99.6 % capacity retention over 60 cycles, but they also show excellent rate capability with respect to counterpart nanoplates‐in‐nanofibers and nanoplates. The high specific surface areas as well as the unique feature of hierarchical structures are probably responsible for the enhanced electrochemical performance. Considering their facile preparation and good lithium storage properties, 1D hierarchical CCO‐NFs will hold promise in practical LIBs.     

定量的复合金属锂作为三维泡沫锂电极用于锂电池的研究

金属锂作为电池的负极材料具有极高的比容量和极低的氧化还原电位,能够显著提升电池的能量密度。然而,金属锂负极在实际应用中所面临的主要问题是锂枝晶、界面副反应和电极体积变化大的难题。在本文中,我们提出了一种通过将定量的金属锂与三维骨架进行复合形成三维泡沫锂负极的策略,并利用三维泡沫锂来抑制锂枝晶的生长和缓解电极的体积变化。因此,三维泡沫锂电极有利于金属锂负极的高效利用,并能借助其与平面锂箔相比更高的比表面积和更多的反应位点来提升电池的倍率性能。因此,通过采用三维泡沫锂,对称电池的循环寿命和倍率性能都得到了有效的提升。EIS数据结果表明,三维泡沫锂能够减小对称电池的电荷转移阻抗。而且,将三维泡沫锂作为负极组装的LTO全电池,与锂箔作为负极相比,循环1000周平均放电比容量从65 mAh·g^-1提升至121 mAh·g^-1。     

锂离子电池合金负极材料的研究进展

本文综述了锂离子电池合金负极材料的研究现状,对比了各种合金负极材料的制备方法,并指出了合金负极材料目前面临的主要问题及现有的解决方案,最后提出纳米锂合金复合物将是合金负极材料发展的最终出路.     

Facile Preparation and Lithium Storage Properties of TiO2@Graphene Composite Electrodes with Low Carbon Content

Over the past decade, TiO₂/graphene composites as electrodes for lithium ion batteries have attracted a great deal of attention for reasons of safety and environmental friendliness. However, most of the TiO₂/graphene electrodes have large graphene content (9–40 %), which is bound to increase the cost of the battery. Logically, reducing the amount of graphene is a necessary part to achieve a green battery. The synthesis of TiO₂ nanosheets under solvothermal conditions without additives is now demonstrated. Through mechanical mixing TiO₂ nanosheets with different amount of reduced graphene (rGO), a series of TiO₂@graphene composites was prepared with low graphene content (rGO content 1, 2, 3, and 5 wt %). When these composites were evaluated as anodes for lithium ion batteries, it was found that TiO₂+3 wt % rGO manifested excellent cycling stability and a high specific capacity (243.7 mAh g^?1 at 1 C; 1 C=167.5 mA g^?1), and demonstrated superior high‐rate discharge/charge capability at 20 C.     

One‐Step Synthesis of SnO2 and TiO2 Hollow Nanostructures with Various Shapes and Their Enhanced Lithium Storage Properties

A versatile one‐step method for the general synthesis of metal oxide hollow nanostructures is demonstrated. This method involves the controlled deposition of metal oxides on shaped α‐Fe₂O₃ crystals which are simultaneously dissolved. A variety of uniform SnO₂ hollow nanostructures, such as nanococoons, nanoboxes, hollow nanorings, and nanospheres, can be readily generated. The method is also applicable to the synthesis of shaped TiO₂ hollow nanostructures. As a demonstration of the potential applications of these hollow nanostructures, the lithium storage capability of SnO₂ hollow structures is investigated. The results show that such derived SnO₂ hollow structures exhibit stable capacity retention of 600–700 mAh g^?1 for 50 cycles at a 0.2 C rate and good rate capability at 0.5–1 C, perhaps benefiting from the unique structural characteristics.     

锰氧化物/碳氮三维网络结构复合材料的制备及锂电性能

通过硝酸锰和乙醇的水热反应在三聚氰胺泡棉(MF)上生成三氧化二锰颗粒,氮气下高温处理后形成锰氧化物负载碳氮三维网络结构的复合物。碳氮网络结构提高了充放电过程中材料结构的稳定性及导电性,且烧结过程中产生的孔道结构有利于锂离子传输,使得该复合材料作为负极在锂离子电池中表现出优异的充放电性能和循环稳定性。材料的比容量和循环稳定性大大提高,经500℃处理后的MnO/CNnws-500材料在160次循环后仍然保留590 m Ah·g~(-1)的比容量,达到氧化亚锰理论容量755 m Ah·g~(-1)的78%。     

多孔碳纳米片的合成及在钠离子电池中的应用

本文以氯化钠为硬模板、硝酸镍为金属源、葡萄糖为碳源,在氮气气氛中于750 ^oC通过一步热解法合成嵌镍碳纳米片,然后经酸处理得到多孔碳纳米片. 通过扫描电镜（SEM）、透射电镜（TEM）、拉曼光谱（Raman）和比表面积测定（BET）表征多孔碳纳米片的形貌和结构. 结果显示：多孔碳纳米片孔分布均匀,孔径大小均一;经过酸处理后,碳材料的石墨化程度降低;具有较大的比表面积（约340 m²•g^-1）. 电化学测试表明,电极在100mA•g^-1电流密度下,经过200周循环放电后比容量可维持在309.4 mAh•g^-1,甚至在1000 mA•g^-1 的大电流下其放电比容量仍然可达到173mAh•g^-1,表现出良好的循环稳定性和倍率性能,其在钠离子电池负极材料方面具有潜在的应用前景.     

二次包覆法制备煤沥青基硅/碳复合物及其锂离子电池性能

本文采用市售纳米硅为硅源,以软化点低、得碳率高、价格便宜的煤沥青作为碳源,通过两步包覆法制备了煤沥青基硅/碳(Si/C/C)复合物,并研究其作为锂离子电池负极材料的电化学性能。 结果表明,所得复合物的粒径在300~350 nm间,Si纳米粒子被C包覆并相互连结成C-Si-C网络结构,其中Si含量为27%的硅/碳复合物(Si/C/C-27%)作为锂电池电极材料表现了良好的储锂性能。 在0.1 A/g的小电流密度下,Si/C/C-27%的放电比容量为1281 mA·h/g;在3 A/g的大电流密度下,其放电比容量仍能保持在582 mA·h/g,表现了良好的倍率性能。Si/C/C-27%在2 A/g的电流密度下经过100次的循环后其比容量保持率为76.61%,表现了良好的循环稳定性。 相比于煤沥青基碳的一次包覆所得的硅/碳复合材料(Si/C),Si/C/C有效提高了Si纳米粒子的导电性并抑制了其在嵌锂和脱锂过程中的体积膨胀。 本文提出的二次包覆的新方法为制备具有优异电化学性能的锂离子电池负极材料提供了新的研究思路。     

General Synthesis of Multi‐Shelled Mixed Metal Oxide Hollow Spheres with Superior Lithium Storage Properties

Complex hollow structures of transition metal oxides, especially mixed metal oxides, could be promising for different applications such as lithium ion batteries. However, it remains a great challenge to fabricate well‐defined hollow spheres with multiple shells for mixed transition metal oxides. Herein, we have developed a new “penetration–solidification–annealing” strategy which can realize the synthesis of various mixed metal oxide multi‐shelled hollow spheres. Importantly, it is found that multi‐shelled hollow spheres possess impressive lithium storage properties with both high specific capacity and excellent cycling stability. Specifically, the carbon‐coated CoMn₂O₄ triple‐shelled hollow spheres exhibit a specific capacity of 726.7 mA h g^?1 and a nearly 100 % capacity retention after 200 cycles. The present general strategy could represent a milestone in design and synthesis of mixed metal oxide complex hollow spheres and their promising uses in different areas.     

Excellent Electrochemical Properties of Yolk–Shell MoO3 Microspheres Formed by Combustion of Molybdenum Oxide–Carbon Composite Microspheres

Yolk–shell MoO₃ microspheres are prepared by a two‐step process in which molybdenum oxide–carbon (MoO_x–C) composite microspheres are first obtained by spray pyrolysis, followed by combustion at 400 °C in air. The yolk–shell microspheres exhibit excellent electrochemical properties and structural stability.