Ru−FeNi Alloy Heterojunctions on Lignin-derived Carbon as Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Rational design of efficient, stable, and inexpensive bifunctional electrocatalysts for oxygen evolution reactions (OER) and hydrogen evolution reactions (HER) is a key challenge to realize green hydrogen production via electrolytic water splitting. Herein, Ru nanoparticles and FeNi alloy heterojunction catalyst (Ru−FeNi@NLC) encapsulated via lignin-derived carbon was prepared by self-assembly precipitation and in situ pyrolysis. The designed catalyst displays excellent performance at 10 mA cm⁻² with low overpotentials of 36 mV for HER and 198 mV for OER, and only needs 1.48 V for overall water splitting. Results and DFT calculations show the unique N-doped lignin-derived carbon layer and Ru−FeNi heterojunction contribute to optimized electronic structure for enhancing electron transfer, balanced free energy of reactants and intermediates in the sorption/desorption process, and significantly reduced reaction energy barrier for the HER and OER rate-determining steps, thus improved reaction kinetics. This work provides a new in situ pyrolysis doping strategy based on renewable biomass for the construction of highly active, stable and cost-effective catalysts.     

Dual modulation of morphology and electronic structures of VN@C electrocatalyst by W doping for boosting hydrogen evolution reaction

Developing high-efficiency and robust durability electrocatalyst for hydrogen evolution reaction (HER) in water electrolysis functions as a crucial role for the construction of green hydrogen economy, herein, ultrafine W-doped vanadium nitride nanoparticles anchored on N-doped graphitic carbon framework (WVN@NGC) are synthesized through a one-step simple pyrolysis protocol. Owing to the enlarged catalytically active sites, enhanced electrical conductivity and optimized electronic structure, the resultant VN/WN@NGC delivered the prominent HER performance with overpotentials of 143 mV and 158 mV at 10 mA/cm² in acid and alkaline media, respectively, accompanied by the long-term stability for at least 50 h. This work highlights a novel strategy for a metal-triggered modulation of nitride-based HER electrocatalyst for sustainable energy conversion device.     

Synchronous Electrocatalytic Design of Architectural and Electronic Structure Based on Bifunctional LDH-Co3O4/NF toward Water Splitting

The rational design of highly efficient bifunctional electrocatalysts for water splitting is extremely urgent for application in sustainable energy conversion processes to alleviate the energy crisis and environmental pollution. In this work, through simple deposition of layered double hydroxides (LDH) on Co₃O₄/NF (NF=nickel foam) nanosheets arrays, hierarchical Co³⁺-rich materials based on LDH-Co₃O₄/NF are prepared as highly active and stable electrocatalysts for water splitting. The NiFe-LDH-Co₃O₄/NF demonstrates excellent electrochemical activity with an overpotential of 214 mV for the OER and an overpotential of 162 mV for the HER at 10 mA cm⁻². Such a performance is attributed to the optimized electronic states with a high concentration of Co³⁺, which improves the intrinsic activity, and the sheet-on-sheet hierarchical structure, which increases the number of active sites. The unique synchronous design of both the architectural and electronic structure of nanomaterials can simultaneously accelerate the reaction kinetics and provide a more convenient charge transfer path. Therefore, the strategy reported herein may open a new pathway for the design of excellent electrocatalysts for water splitting.     

A Double Atomic-Tuned RuBi SAA/Bi@OG Nanostructure with Optimum Charge Redistribution for Efficient Hydrogen Evolution

Charge redistribution on surface of Ru nanoparticle can significantly affect electrocatalytic HER activity. Herein, a double atomic-tuned RuBi SAA/Bi@OG nanostructure that features RuBi single-atom alloy nanoparticle supported by Bi−O single-site-doped graphene was successfully developed by one-step pyrolysis method. The alloyed Bi single atom and adjacent Bi−O single site in RuBi SAA/Bi@OG can synergistically manipulate electron transfer on Ru surface leading to optimum charge redistribution. Thus, the resulting RuBi SAA/Bi@OG exhibits superior alkaline HER activity. Its mass activity is up to 65000 mA mg⁻¹ at an overpotential of 150 mV, which is 72.2 times as much as that of commercial Pt/C. DFT calculations reveal that the RuBi SAA/Bi@OG possesses the optimum charge redistribution, which is most beneficial to strengthen adsorption of water and weaken hydrogen-adsorption free energy in HER process. This double atomic-tuned strategy on surface charge redistribution of Ru nanoparticle opens a new way to develop highly efficient electrocatalysts.     

Controlled Synthesis of Ni-Doped MoS2 Hybrid Electrode for Synergistically Enhanced Water-Splitting Process

The development of high-efficiency, low-cost, and earth-abundant electrocatalysts for overall water splitting remains a challenge. In this work, Ni-modified MoS₂ hybrid catalysts are grown on carbon cloth (Ni-Mo-S@CC) through a one-step hydrothermal treatment. The optimized Ni-Mo-S@CC catalyst shows excellent hydrogen evolution reaction (HER) activity with a low overpotential of 168 mV at a current density of 10 mA cm⁻² in 1.0 m KOH, which is lower than those of Ni-Mo-S@CC (1:1), Ni-Mo-S@CC (3:1), and pure MoS₂. Significantly, the Ni-Mo-S@CC hybrid catalyst also displays outstanding oxygen evolution reaction (OER) activity with a low overpotential of 320 mV at a current density of 10 mA cm⁻², and remarkable long-term stability for 30 h at a constant current density of 10 mA cm⁻². Experimental results and theoretical analysis based on density functional theory demonstrate that the excellent electrocatalytic performance can be attributed mainly to the remarkable conductivity, abundant active sites, and synergistic effect of the Ni-doped MoS₂. This work sheds light on a unique strategy for the design of high-performance and stable electrocatalysts for water-splitting electrolyzers.     

Molybdenum Carbide‐Embedded Multichannel Hollow Carbon Nanofibers as Bifunctional Catalysts for Water Splitting

With the environmental pollution and non‐renewable fossil fuels, it is imperative to develop eco‐friendly, renewable, and highly efficient electrocatalysts for sustainable energy. Herein, a simple electrospinning process used to synthesis Mo₂C‐embedded multichannel hollow carbon nanofibers (Mo₂C‐MCNFs) and followed by the pyrolysis process. As prepared lotus root‐like nanoarchitecture could offer rich porosity and facilitate the electrolyte infiltration, the Mo₂C‐MCNFs delivered favourable catalytic activity for HER and OER. The resultant catalysts exhibit low overpotentials of 114 mV and 320 mV at a current density of 10 mA cm^?2 for HER and OER, respectively. Furthermore, using the Mo₂C‐MCNFs catalysts as a bifunctional electrode toward overall water splitting, which only needs a small cell voltage of 1.68 V to afford a current density of 10 mA cm^?2 in the home‐made alkaline electrolyzer. This interesting work presents a simple and effective strategy to further fabricating tunable nanostructures for energy‐related applications.     

Modular Design of Noble‐Metal‐Free Mixed Metal Oxide Electrocatalysts for Complete Water Splitting

Electrocatalytic water splitting into H₂ and O₂ is a key technology for carbon‐neutral energy. Here, we report a modular materials design leading to noble metal‐free composite electrocatalysts, which combine high electrical conductivity, high OER and HER reactivity and high durability. The scalable bottom‐up fabrication allows the stable deposition of mixed metal oxide nanostructures with different functionalities on copper foam electrodes. The composite catalyst shows sustained OER and HER activity in 0.1 m aqueous KOH over prolonged periods (t>10 h) at low overpotentials (OER: ≈300 mV; HER: ≈100 mV) and high faradaic efficiencies (OER: ≈100 %, HER: ≈98 %). The new synthetic concept will enable the development of multifunctional, mixed metal oxide composites as high‐performance electrocatalysts for challenging energy conversion and storage reactions.     

Boosting Electrocatalytic Oxygen Evolution over Ce−Co9S8 Core–Shell Nanoneedle Arrays by Electronic and Architectural Dual Engineering

An dual electronic and architectural engineering strategy is a good way to rationally design earth-abundant and highly efficient electrocatalysts of the oxygen evolution reaction (OER) for sustainable hydrogen-based energy devices. Here, a Ce-doped Co₉S₈ core–shell nanoneedle array (Ce−Co₉S₈@CC) supported on a carbon cloth has been designed and developed to accelerate the sluggish kinetics of the OER. Profiting from valance alternative Ce doping, a fine core–shell structure and vertically aligned nanoneedle arrayed architecture, Ce−Co₉S₈@CC integrates modulated electronic structure, highly exposed active sites, and multidimensional mass diffusion channels; together, these afford a favorable catalyzed OER. Ce−Co₉S₈@CC exhibits remarkable performance in the OER in an alkaline medium, where the overpotential requires only 242 mV to deliver a current density of 10 mA cm⁻² for the OER; this is 70 mV superior to that of Ce-free Co₉S₈ catalyst and other counterparts. Good stability and impressive selectivity (nearly 100 % Faradic efficiency) are also demonstrated. When integrated into a two-electrode OER//HER electrolyzer, the as-prepared Ce−Co₉S₈@CC displays a low operation potential of 1.54 V at 10 mA cm⁻² and long-term stability, thus demonstrating great potential for economical water electrolysis.     

Engineering morphologies of cobalt oxide/phosphate-carbon nanohybrids for high-efficiency electrochemical water oxidation and reduction

Active non-noble metal catalysts plays a decisive role for water electrolysis,however,the rational design and development of cost-efficient electrocatalysts with Pt/IrO2-like activity is still a challenging task.Herein,a facile one-step electrodeposition route in deep eutectic solvents(DESs) is developed for morphology-controllable synthesis of cobalt oxide/phosphate-carbon nano hybrids on nickel foam(CoPO@C/NF).A series of CoPO@C/NF nanostructures including cubes,octahedrons,microspheres and nanoflowers are synthesized,which show promising electrocatalytic properties toward oxygen and hydrogen evolution reactions(OER/HER).Such surface self-organized microstructure with accessible active sites make a significant contribution to the enhanced electrochemical activity,and hybridizing cobalt oxide with cobalt pyrophosphates and carbon can result in enhanced OER performance through synergistic catalysis.Among all nanostructures,the obtained microspherical CoPO@C/NF-3 catalyst exhibits excellent catalytic activities for OER and HER in 1.0 M KOH,affording an anodic current density of 10 mA cm^-2 at overpotentials of 293 mV for OER and 93 mV for HER,with good long-time stability.This work offers a practical route for engineering the high-performance electrocatalysts towards efficient energy conversion and storage devices.     

RuP2‐Based Catalysts with Platinum‐like Activity and Higher Durability for the Hydrogen Evolution Reaction at All pH Values

Highly active, stable, and cheap Pt‐free catalysts for the hydrogen evolution reaction (HER) are under increasing demand for future energy conversion systems. However, developing HER electrocatalysts with Pt‐like activity that can function at all pH values still remains as a great challenge. Herein, based on our theoretical predictions, we design and synthesize a novel N,P dual‐doped carbon‐encapsulated ruthenium diphosphide (RuP₂@NPC) nanoparticle electrocatalyst for HER. Electrochemical tests reveal that, compared with the Pt/C catalyst, RuP₂@NPC not only has Pt‐like HER activity with small overpotentials at 10 mA cm⁻² (38 mV in 0.5 m H₂SO₄, 57 mV in 1.0 m PBS and 52 mV in 1.0 m KOH), but demonstrates superior stability at all pH values, as well as 100 % Faradaic yields. Therefore, this work adds to the growing family of transition‐metal phosphides/heteroatom‐doped carbon heterostructures with advanced performance in HER.     

3D Carbon Foam Supported Edge-Rich N-Doped MoS2 Nanoflakes for Enhanced Electrocatalytic Hydrogen Evolution

Molybdenum disulfide (MoS₂) is one of the most promising alternatives to the Pt-based electrocatalysts for the hydrogen evolution reaction (HER). However, its performance is currently limited by insufficient active edge sites and poor electron transport. Hence, enormous efforts have been devoted to constructing more active edge sites and improving conductivity to obtain enhanced electrocatalytic performance. Herein, the 3D carbon foam (denoted as CF) supported edge-rich N-doped MoS₂ nanoflakes were successfully fabricated by using the commercially available polyurethane foam (PU) as the 3D substrate and PMo₁₂O₄₀³⁻ clusters (denoted as PMo₁₂) as the Mo source through redox polymerization, followed by sulfurization. Owing to the uniform distribution of nanoscale Mo sources and 3D carbon foam substrate, the as-prepared MoS₂-CF composite possessed well-exposed active edge sites and enhanced electrical conductivity. Systematic investigation demonstrated that the MoS₂-CF composite showed high HER performance with a low overpotential of 92 mV in 1.0 m KOH and 155 mV in 0.5 m H₂SO₄ at a current density of 10 mA cm⁻². This work offers a new pathway for the rational design of MoS₂-based HER electrocatalysts.     

Cable-like carbon nanotubes decorated metal-organic framework derived ultrathin CoSe2/CNTs nanosheets for electrocatalytic overall water splitting

The high cost and low reserves of noble metals greatly hinder their practical applications in new energy production and conversion. The exploration of cost-effective alternative electrocatalysts with the ability to drive hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is extremely significant to promote overall water splitting. Herein, ultrathin CoSe₂/CNTs nanocomposites have been synthesized by a facile two-step method, where the ultrathin Co-MOF (metal organic-framework) decorated with cable-like carbon nanotubes (CNTs) (Co-MOF/CNTs) was initially fabricated, and followed a low-temperature selenization process. The ultrathin CoSe₂ nanosheets as well as the superior conductivity of CNTs synergistically resulted in abundant active sites and enhanced conductivity to boost the electrocatalytic activity. The as-prepared CoSe₂/CNTs electrocatalysts exhibited an overpotential of 190 mV and 300 mV vs. reversible hydrogen electrode (RHE) at a current density of 10 mA/cm² for the HER and OER in alkaline solution, respectively, and demonstrated superior durability. Furthermore, the as-prepared bifunctional CoSe₂/CNTs electrocatalysts can act as cathode and anode in an electrolyzer, showing a cell voltage of 1.75 V at 10 mA/cm² for overall water splitting.     

In Situ Growth of Ultrafine Pt Nanoparticles onto Hierarchical Co3O4 Nanosheet-Assembled Microflowers for Efficient Electrocatalytic Hydrogen Evolution

The development of Pt-based electrocatalysts with high Pt utilization efficiency toward the hydrogen evolution reaction (HER) is of great significance for the future sustainable hydrogen economy. For rational design of high-performance HER electrocatalyst, the simultaneous consideration of both thermodynamic and kinetic aspects remains greatly challenging. Herein, a simple template-derived strategy is demonstrated for the in situ growth of ultrafine Pt nanoparticles onto Co₃O₄ nanosheet-assembled microflowers (abbreviated as Pt/Co₃O₄ microflowers hereafter) by using the pre-fabricated PtCo-based Hofmann coordination polymer as reactive templates. The elaborate preparation of such intriguing hierarchical architecture with well-dispersed tiny Pt nanoparticles, abundant metal/oxide heterointerfaces and open configuration endows the formed Pt/Co₃O₄ microflowers with high Pt utilization efficiency, rich active sites, lowered energy barrier for water dissociation and expedited reaction kinetics. Consequently, the Pt/Co₃O₄ microflowers exhibit superior HER activity with a relatively low overpotential of 34 mV to deliver a current density of 10 mA cm⁻², small Tafel slope (34 mV dec⁻¹) and outstanding electrochemical stability, representing an attractive electrocatalyst for practical water splitting. What's more, our concept of in situ construction of metal/oxide heterointerfaces may provide a new opportunity to design high-performance electrocatalysts for a variety of applications.     

General synthesis of Pt and Ni co-doped porous carbon nanofibers to boost HER performance in both acidic and alkaline solutions

It is essential to develop efficient electrocatalysts to generate hydrogen from water electrolysis for hydrogen economy. In this work, platinum(Pt) and nickel(Ni) co-doped porous carbon nanofibers(Pt/NiPCNFs) with low Pt content were prepared via an electrospinning, carbonization and galvanic replacement reaction. Because of the high electrical conductivity, abundant electrochemical active sites and synergistic effect between Pt and Ni nanoparticles, the optimized Pt/Ni-PCNFs catalyst shows an e...     

Two-Dimensional NiIr@N-Doped Carbon Nanocomposites Supported on Ni Foam for Electrocatalytic Overall Water Splitting

Electrochemical water splitting can provide a promising avenue for sustainable hydrogen production. Highly efficient electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are extremely important for the practical application of water splitting technology. Herein, a one-step annealing strategy is reported for the fabrication of a metal–organic framework-derived bifunctional self-supported electrocatalyst, which is composed of two-dimensional N-doped carbon-wrapped Ir-doped Ni nanoparticle composites supported on Ni foam (NiIr@N-C/NF). The resultant NiIr@N-C/NF displays excellent electrocatalytic performance in 1.0 m KOH, with low overpotentials of 32 mV at 10 mA cm⁻² for the HER and 329 mV at 50 mA cm⁻² for the OER. Particularly, the HER-OER bifunctional NiIr@N-C/NF needs only 1.50 V to yield 10 mA cm⁻² for overall water splitting.     

A General Route to Prepare Low‐Ruthenium‐Content Bimetallic Electrocatalysts for pH‐Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm^?2 in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm^?2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Hierarchical Tubular Architecture Constructed by Vertically Aligned CoS2-MoS2 Nanosheets for Hydrogen Evolution Electrocatalysis

Developing efficient electrocatalysts for the hydrogen evolution reaction (HER) is crucial for establishing a sustainable and environmentally friendly energy system, but it is still a challenging issue. Herein, hierarchical tubular-structured CoS₂-MoS₂/C as efficient electrocatalysts are fabricated through a unique metal–organic framework (MOF) mediated self-sacrificial templating. Core–shell structured MoO₃@ZIF-67 nanorods are used both as a precursor and a sacrificial template to form the one-dimensional tubular heterostructure where vertically aligned two-dimensional CoS₂-MoS₂ nanosheets are formed on the MOF-derived carbon tube. Trace amounts of noble metals (Pd, Rh, and Ru) are successfully introduced to enhance the electrocatalytic property of the CoS₂-MoS₂/C nanocomposites. The as-synthesized hierarchical tubular heterostructures exhibit excellent HER catalytic performance owing to the merits of the hierarchical hollow architecture with abundantly exposed edges and the uniformly dispersed active sites. Impressively, the optimal Pd-CoS₂-MoS₂/C-600 catalyst delivers a current density of 10 mA cm⁻² at a low overpotential of 144 mV and a small Tafel slope of 59.9 mV/dec in 0.5 m H₂SO₄. Overall, this MOF-mediated strategy can be extended to the rational design and synthesis of other hollow heterogeneous catalysts for scalable hydrogen generation.     

Carbon Nanotubes Decorated with CoP Nanocrystals: A Highly Active Non‐Noble‐Metal Nanohybrid Electrocatalyst for Hydrogen Evolution

The development of effective and inexpensive hydrogen evolution reaction (HER) electrocatalysts for future renewable energy systems is highly desired. The strongly acidic conditions in proton exchange membranes create a need for acid‐stable HER catalysts. A nanohybrid that consists of carbon nanotubes decorated with CoP nanocrystals (CoP/CNT) was prepared by the low‐temperature phosphidation of a Co₃O₄/CNT precursor. As a novel non‐noble‐metal HER catalyst operating in acidic electrolytes, the nanohybrid exhibits an onset overpotential of as low as 40 mV, a Tafel slope of 54 mV dec^?1, an exchange current density of 0.13 mA cm^?2, and a Faradaic efficiency of nearly 100 %. This catalyst maintains its catalytic activity for at least 18 hours and only requires overpotentials of 70 and 122 mV to attain current densities of 2 and 10 mA cm^?2, respectively.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Ru Nanoparticles Supported on Co-Embedded N-Doped Carbon Nanotubes as Efficient Electrocatalysts for Hydrogen Evolution in Basic Media

A challenging but urgent task is to construct efficient and robust hydrogen evolution reaction(HER) electrocatalysts for practically feasible and sustainable hydrogen production through alkaline water electrolysis. Herein we report a simple and mild pyrolysis method to synthesize the efficient Ru nanoparticles(NPs) supported on Co-embedded N-doped carbon nanotubes(Ru/Co-NCNTs) catalyst for HER in basic media. The Ru/Co-NCNTs display remarkable performance with a low overpotential of only 35 mV at 10 mA/cm², a small Tafel slope(36 mV/dec), and a high mass activity in 1 mol/L KOH, which is superior to commercial 20% Pt/C catalyst. This excellent performance is benefited from the enhanced conductivity of N-doped carbon nanotubes(NCNTs) and high intrinsic activity triggered by synergistic coupling between Ru NPs and Co-embedded N-doped carbon nanotubes(Co-NCNTs).