Dual Dopamine Derived Polydopamine Coated N-Doped Porous Carbon Spheres as a Sulfur Host for High-Performance Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are considered to be one of the most promising energy storage systems owing to their high energy density and low cost. However, their wide application is still limited by the rapid capacity fading. Herein, polydopamine (PDA)-coated N-doped hierarchical porous carbon spheres (NPC@PDA) are reported as sulfur hosts for high-performance Li-S batteries. The NPC core with abundant and interconnected pores provides fast electron/ion transport pathways and strong trapping ability towards lithium polysulfide intermediates. The PDA shell could further suppress the loss of lithium polysulfide intermediates through polar–polar interactions. Benefiting from the dual function design, the NPC/S@PDA composite cathode exhibits an initial capacity of 1331 mAh g⁻¹ and remains at 720 mAh g⁻¹ after 200 cycles at 0.5 C. At the pouch cell level with a high sulfur mass loading, the NPC/S@PDA composite cathode still exhibits a high capacity of 1062 mAh g⁻¹ at a current density of 0.4 mA cm⁻².     

Catalytically Active CoSe2 Supported on Nitrogen-Doped Three Dimensional Porous Carbon as a Cathode for Highly Stable Lithium-Sulfur Battery

Lithium-sulfur batteries are promising secondary energy storage devices that are mainly limited by its unsatisfactory cyclability owing to inefficient reversible conversion of sulfur and lithium sulfide on the cathode during the discharge/charging process. In this study, nitrogen-doped three-dimensional porous carbon material loaded with CoSe₂ nanoparticles (CoSe₂-PNC) is developed as a cathode for lithium-sulfur battery. A combination of CoSe₂ and nitrogen-doped porous carbon can efficiently improve the cathode activity and its conductivity, resulting in enhanced redox kinetics of the charge/discharge process. The obtained electrode exhibits a high discharge specific capacity of 1139.6 mAh g⁻¹ at a current density of 0.2 C. After 100 cycles, its capacity remained at 865.7 mAh g⁻¹ thus corresponding to a capacity retention of 75.97 %. In a long-term cycling test, discharge specific capacity of 546.7 mAh g⁻¹ was observed after 300 cycles performed at a current density of 1 C.     

Sulfur–carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte

Sulfur–carbon nano-composite with elemental sulfur incorporated in porous carbon was prepared by thermal treatment of a mixture of sulfur and active carbon. The new material was characterized by X-ray diffraction, BET and scanning electron microscopy. The nano-composite, tested at room temperature as cathode in a nonaqueous lithium cell based on PVDF gel electrolyte, exhibited a reversible capacity of 440 mAh g⁻¹ at a current density of 0.3 mA cm⁻². The utilization of electrochemically active sulfur was about 90% assuming a complete reaction to the product of Li₂S during cycling.     

Organic Thiocarboxylate Electrodes for a Room‐Temperature Sodium‐Ion Battery Delivering an Ultrahigh Capacity

Organic room‐temperature sodium‐ion battery electrodes with carboxylate and carbonyl groups have been widely studied. Herein, for the first time, we report a family of sodium‐ion battery electrodes obtained by replacing stepwise the oxygen atoms with sulfur atoms in the carboxylate groups of sodium terephthalate which improves electron delocalization, electrical conductivity and sodium uptake capacity. The versatile strategy based on molecular engineering greatly enhances the specific capacity of organic electrodes with the same carbon scaffold. By introducing two sulfur atoms to a single carboxylate scaffold, the molecular solid reaches a reversible capacity of 466 mAh g⁻¹ at a current density of 50 mA g⁻¹. When four sulfur atoms are introduced, the capacity increases to 567 mAh g⁻¹ at a current density of 50 mA g⁻¹, which is the highest capacity value reported for organic sodium‐ion battery anodes until now.     

Encapsulating Sulfur into Hierarchically Ordered Porous Carbon as a High‐Performance Cathode for Lithium–Sulfur Batteries

A three‐dimensional (3D) hierarchical carbon–sulfur nanocomposite that is useful as a high‐performance cathode for rechargeable lithium–sulfur batteries is reported. The 3D hierarchically ordered porous carbon (HOPC) with mesoporous walls and interconnected macropores was prepared by in situ self‐assembly of colloidal polymer and silica spheres with sucrose as the carbon source. The obtained porous carbon possesses a large specific surface area and pore volume with narrow mesopore size distribution, and acts as a host and conducting framework to contain highly dispersed elemental sulfur. Electrochemical tests reveal that the HOPC/S nanocomposite with well‐defined nanostructure delivers a high initial specific capacity up to 1193 mAh g^?1 and a stable capacity of 884 mAh g^?1 after 50 cycles at 0.1 C. In addition, the HOPC/S nanocomposite exhibits high reversible capacity at high rates. The excellent electrochemical performance is attributed exclusively to the beneficial integration of the mesopores for the electrochemical reaction and macropores for ion transport. The mesoporous walls of the HOPC act as solvent‐restricted reactors for the redox reaction of sulfur and aid in suppressing the diffusion of polysulfide species into the electrolyte. The “open” ordered interconnected macropores and windows facilitate transportation of electrolyte and solvated lithium ions during the charge/discharge process. These results show that nanostructured carbon with hierarchical pore distribution could be a promising scaffold for encapsulating sulfur to approach high specific capacity and energy density with long cycling performance.     

Hierarchical porous carbon/selenium composites derived from abandoned paper cup as Li-Se battery cathodes

Paper cup composed of crude cellulose is a common waste in daily life. In this paper, hierarchical porous carbons have been successfully prepared by an initial hydrothermal treatment and subsequent activation route from abandoned paper cup, and then paper cup derived carbons are used as scaffolds to fabricate serial carbon/Se composites. The optimal composite presents unique 3D porous structure, with amorphous selenium uniformly confined into the micropores of carbon. As the cathode materials of Li-Se battery, this composite reveals an initial reversible discharge capacity of 517.2 mAh g⁻¹ at 0.2C, and a capacity value of 431.9 mAh g⁻¹ can be retained after 60 cycles. Even at a high rate of 4C, a capacity value of 295.8 mAh g⁻¹ can be obtained. By comparison, the improved electrochemical performance of the optimal composite should be attributed to reasonable porous structure and effective encapsulation of amorphous selenium.     

Low-Temperature Synthesis of Honeycomb CuP2@C in Molten ZnCl2 Salt for High-Performance Lithium Ion Batteries

Phosphorus-rich metal phosphides have very high lithium storage capacities, but they are difficult to prepare. A low-temperature phosphorization method based on Mg reducing PCl₃ in ZnCl₂ molten salt at 300 °C is developed to synthesize phosphorus-rich CuP₂@C from a Cu-MOF derived Cu@C composite. Abnormal oxidation of Cu by Zn²⁺ in the molten salt is observed, which leads to the porous honeycomb nanostructure and homogeneously distributed ultrafine CuP₂ nanocrystals. The honeycomb CuP₂@C exhibits excellent lithium storage performance with high reversible capacity (1146 mAh g⁻¹ at 0.2 A g⁻¹) and superior cycling stability (720 mAh g⁻¹ after 600 cycles at 1.0 A g⁻¹), showing the promising application of P-rich metal phosphides in lithium ion batteries.     

Three‐Dimensional Hierarchical Constructs of MOF‐on‐Reduced Graphene Oxide for Lithium–Sulfur Batteries

A three‐dimensional (3D) hierarchical MOF‐on‐reduced graphene oxide (MOF‐on‐rGO) compartment was successfully synthesized through an in situ reduced and combined process. The unique properties of the MOF‐on‐rGO compartment combining the polarity and porous features of MOFs with the high conductivity of rGO make it an ideal candidate as a sulfur host in lithium–sulfur (Li‐S) batteries. A high initial discharge capacity of 1250 mAh g^?1 at a current density of 0.1 C (1.0 C=1675 mAh g^?1) was reached using the MOF‐on‐rGO based electrode. At the rate of 1.0 C, a high specific capacity of 601 mAh g^?1 was still maintained after 400 discharge–charge cycles, which could be ascribed to the synergistic effect between MOFs and rGO. Both the hierarchical structures of rGO and the polar pore environment of MOF retard the diffusion and migration of soluble polysulfide, contributing to a stable cycling performance. Moreover, the spongy‐layered rGO can buffer the volume expansion and contraction changes, thus supplying stable structures for Li‐S batteries.     

Enhancement of Lithium Storage Performance of Carbon Microflowers by Achieving a High Surface Area

High‐surface‐area, nitrogen‐doped carbon microflowers (A‐NCFs‐4) assembled from porous nanosheets are prepared in a three‐step process: soft‐templating self‐assembly, thermal decomposition, and KOH activation. The hydrazine hydrate used in our experiment serves not only as a structure‐directing agent, but also as a nitrogen source. The resultant A‐NCFs‐4 has a hierarchical porous structure and its specific surface area is as high as 2309 m² g^?1. When used as anode, it exhibits a reversible capacity as high as 807 mAh g^?1 at 300 mA g^?1 after 100 cycles, and an excellent rate capability of 200 mAh g^?1 at a high current density of 8 A g^?1. Compared with unactivated counterpart, A‐NCFs‐4 exhibits a significantly improved lithium storage capacity and rate capability; this can be attributed to its unique structural characteristics and high surface area. The hierarchical micro‐/mesopore structure, high surface area, and nitrogen doping of A‐NCFs‐4 could guarantee fast mass transport for lithium species, enhance the A‐NCFs‐4/electrolyte contact area, shorten the lithium‐ion diffusion length, and accommodate strain induced by volume changes during the electrochemical reaction. The results indicate that the as‐prepared A‐NCFs‐4 could be a promising candidate as a high‐performance anode for lithium‐ion batteries.     

Scalable Synthesis of Porous SiFe@C Composite with Excellent Lithium Storage

Utilizing cost-effective raw materials to prepare high-performance silicon-based anode materials for lithium-ion batteries (LIBs) is both challenging and attractive. Herein, a porous SiFe@C (pSiFe@C) composite derived from low-cost ferrosilicon is prepared via a scalable three-step procedure, including ball milling, partial etching, and carbon layer coating. The pSiFe@C material integrates the advantages of the mesoporous structure, the partially retained FeSi₂ conductive phase, and a uniform carbon layer (12–16 nm), which can substantially alleviate the huge volume expansion effect in the repeated lithium-ion insertion/extraction processes, effectively stabilizing the solid–electrolyte interphase (SEI) film and markedly enhancing the overall electronic conductivity of the material. Benefiting from the rational structure, the obtained pSiFe@C hybrid material delivers a reversible capacity of 1162.1 mAh g⁻¹ after 200 cycles at 500 mA g⁻¹, with a higher initial coulombic efficiency of 82.30 %. In addition, it shows large discharge capacities of 803.1 and 600.0 mAh g⁻¹ after 500 cycles at 2 and 4 A g⁻¹, respectively, manifesting an excellent electrochemical lithium storage. This work provides a good prospect for the commercial production of silicon-based anode materials for LIBs with a high lithium-storage capacity.     

The one-step preparation and electrochemical characteristics of tin dioxide nanocrystalline materials

Tin dioxide nanocrystallines were prepared by one-step synthesis method – using amphiphilic P123 as a template. The crystalline nanomaterials present the uniform nano-size 15 nm and somewhat ordered porous meso-frameworks with average pores sizes of 3.5 and 9.5 nm. Meanwhile, the nanomaterials as the anode materials in lithium ion battery deliver high reversible capacity 792 mAh g⁻¹ in the first cycle, which is equal to the theoretical capacity. No aggregation of nano-tin particles was observed and the cracking of structure by the large volume change is efficiently limited owing to the porous mesostructured nanomaterials in the charge/discharge processes. The improved electrochemical properties are attributed to the particle size and structure of materials.     

Sulfur‐Impregnated Core–Shell Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Core–shell hierarchical porous carbon spheres (HPCs) were synthesized by a facile hydrothermal method and used as host to incorporate sulfur. The microstructure, morphology, and specific surface areas of the resultant samples have been systematically characterized. The results indicate that most of sulfur is well dispersed over the core area of HPCs after the impregnation of sulfur. Meanwhile, the shell of HPCs with void pores is serving as a retard against the dissolution of lithium polysulfides. This structure can enhance the transport of electron and lithium ions as well as alleviate the stress caused by volume change during the charge–discharge process. The as‐prepared HPC‐sulfur (HPC‐S) composite with 65.3 wt % sulfur delivers a high specific capacity of 1397.9 mA h g^?1 at a current density of 335 mA g^?1 (0.2 C) as a cathode material for lithium–sulfur (Li‐S) batteries, and the discharge capacity of the electrode could still reach 753.2 mA h g^?1 at 6700 mA g^?1 (4 C). Moreover, the composite electrode exhibited an excellent cycling capacity of 830.5 mA h g^?1 after 200 cycles.     

An Aligned and Laminated Nanostructured Carbon Hybrid Cathode for High‐Performance Lithium–Sulfur Batteries

An aligned and laminated sulfur‐absorbed mesoporous carbon/carbon nanotube (CNT) hybrid cathode has been developed for lithium–sulfur batteries with high performance. The mesoporous carbon acts as sulfur host and suppresses the diffusion of polysulfide, while the CNT network anchors the sulfur‐absorbed mesoporous carbon particles, providing pathways for rapid electron transport, alleviating polysulfide migration and enabling a high flexibility. The resulting lithium–sulfur battery delivers a high capacity of 1226 mAh g⁻¹ and achieves a capacity retention of 75 % after 100 cycles at 0.1 C. Moreover, a high capacity of nearly 900 mAh g⁻¹ is obtained for 20 mg cm⁻², which is the highest sulfur load to the best of our knowledge. More importantly, the aligned and laminated hybrid cathode endows the battery with high flexibility and its electrochemical performances are well maintained under bending and after being folded for 500 times.     

Porous Si-Cu3Si-Cu Microsphere@C Core–Shell Composites with Enhanced Electrochemical Lithium Storage

Low-cost Si-based anode materials with excellent electrochemical lithium storage present attractive prospects for lithium-ion batteries (LIBs). Herein, porous Si-Cu₃Si-Cu microsphere@C composites are designed and prepared by means of an etching/electroless deposition and subsequent carbon coating. The composites show a core–shell structure, with a porous Si/Cu microsphere core surrounded by the N-doped carbon shell. The Cu and Cu₃Si nanoparticles are embedded inside porous silicon microspheres, forming the porous Si/Cu microsphere core. The microstructure and lithium storage performance of porous Si-Cu₃Si-Cu microsphere@C composites can be effectively tuned by changing electroless deposition time. The Si-Cu₃Si-Cu microsphere@C composite prepared with 12 min electroless deposition delivers a reversible capacity of 627 mAh g⁻¹ after 200 cycles at 2 A g⁻¹, showing an enhanced lithium storage ability. The superior lithium storage performance of the Si-Cu₃Si-Cu microsphere@C composite can be ascribed to the improved electronic conductivity, enhanced mechanical stability, and better buffering against the large volume change in the repeated lithiation/delithiation processes.     

Biomass‐Derived Porous Carbon with Micropores and Small Mesopores for High‐Performance Lithium–Sulfur Batteries

Biomass‐derived porous carbon BPC‐700, incorporating micropores and small mesopores, was prepared through pyrolysis of banana peel followed by activation with KOH. A high specific BET surface area (2741 m² g^?1), large specific pore volume (1.23 cm³ g^?1), and well‐controlled pore size distribution (0.6–5.0 nm) were obtained and up to 65 wt % sulfur content could be loaded into the pores of the BPC‐700 sample. When the resultant C/S composite, BPC‐700‐S65, was used as the cathode of a Li–S battery, a large initial discharge capacity (ca. 1200 mAh g^?1) was obtained, indicating a good sulfur utilization rate. An excellent discharge capacity (590 mAh g^?1) was also achieved for BPC‐700‐S65 at the high current rate of 4 C (12.72 mA cm^?2), showing its extremely high rate capability. A reversible capacity of about 570 mAh g^?1 was achieved for BPC‐700‐S65 after 500 cycles at 1 C (3.18 mA cm^?2), indicating an outstanding cycling stability.     

Amorphous Selenium and Crystalline Selenium Nanorods Graphene Composites as Cathode Materials for All-Solid-State Lithium Selenium Batteries

Selenium (Se) is an element in the same main group as sulfur and is characterized by high electrical conductivity and large capacity (675 mAh g⁻¹). Herein, a novel ultra-high dispersion amorphous selenium graphene composite (a-Se/rGO) was synthesized and a selenium nanorods graphene composite (b-Se/rGO) was prepared by hydrothermal method as the cathode material for all solid-state lithium−selenium (Li−Se) batteries, hoping to improve the efficiency and utilization rate of active substances in all solid-state batteries. The all-solid-state batteries were assembled using a heated thawing electrolyte (2LiIHPN−LiI; HPN=3-hydroxypropionitrile). The utilization rate of a-Se/rGO was 103 % and the capacity was 697 mAh g⁻¹, which remained at 281 mAh g⁻¹ (41.6 % of the 675 mAh g⁻¹) after 30 cycles under 0.5 C. Notably, a-Se/rGO showed excellent performance concerning its utilization rate, with a capacity of up to 610 mAh g⁻¹ at 2 C, due to the high availability of amorphous Se and the special properties of the electrolytes. However, in the charge and discharge cycles, the second discharge capacity of a-Se/rGO was more significantly attenuated than that of the first discharge due to the formation of larger crystals of selenium during the charging process. The battery assembled using b-Se/rGO maintained a capacity of 270.58 mAh g⁻¹ after 30 cycles (the retention rate of discharge capacity was 66.13 % compared with that in the first cycle). Through TEM and other relevant tests, it is speculated that amorphous selenium is conducive to capacity release, which, however, is affected by the formation of crystalline selenium after the first charge process.     

Acetic Anhydride as an Oxygen Donor in the Non-Hydrolytic Sol–Gel Synthesis of Mesoporous TiO2 with High Electrochemical Lithium Storage Performances

An original, halide-free non-hydrolytic sol–gel route to mesoporous anatase TiO₂ with hierarchical porosity and high specific surface area is reported. This route is based on the reaction at 200 °C of titanium(IV) isopropoxide with acetic anhydride, in the absence of a catalyst or solvent. NMR spectroscopic studies indicate that this method provides an efficient, truly non-hydrolytic and aprotic route to TiO₂. Formation of the oxide involves successive acetoxylation and condensation reactions, both with ester elimination. The resulting TiO₂ materials were nanocrystalline, even before calcination. Small (about 10 nm) anatase nanocrystals spontaneously aggregated to form mesoporous micron-sized particles with high specific surface area (240 m² g⁻¹ before calcination). Evaluation of the lithium storage performances shows a high reversible specific capacity, particularly for the non-calcined sample with the highest specific surface area favouring pseudo-capacitive storage: 253 mAh g⁻¹ at 0.1 C and 218 mAh g⁻¹ at 1 C (C=336 mA g⁻¹). This sample also shows good cyclability (92 % retention after 200 cycles at 336 mA g⁻¹) with a high coulombic efficiency (99.8 %). Synthesis in the presence of a solvent (toluene or squalane) offers the possibility to tune the morphology and texture of the TiO₂ nanomaterials.     

Facile simultaneous polymerization enabled in-situ confinement of size-tailored GeO2 nanocrystals in continuous S-Doped carbons for lithium storage

GeO₂ is a promising anode material for lithium ion batteries due to its high theoretical capacity (1126 mAh g^?1 for reversibly storing 4.4 Li⁺), and moderately low operating voltage (<1.5 V). Nevertheless, the fabrication of truly durable GeO₂ anode with satisfactory rate capability and cycling stability remains a big challenge because of its inherent low conductivity, and the large volume expansion upon charge-discharge that causes severe capacity fading. In this study, an innovative nanostructure with size-adjustable GeO₂ nanoparticles (16–26 nm) embedded in continuous S-doped carbon (GeO₂/S-doped carbon, GSC) has been successfully fabricated via a facile in-situ simultaneous polymerization method followed by heat treatment. The electrochemical results indicate that the as-prepared GSC composites show high reversible capacity (672.9 mAh g^?1 at 50 mA g^?1), superior rate capability (332.9 mAh g^?1 at 1000 mA g^?1), and long-term cycle life (179 mAh g^?1 after 500 cycles at 1000 mA g^?1) as anode materials for lithium ion batteries. The excellent electrochemical performance of GSC nanocomposites could be ascribed to the homogeneous and continuous S-doped carbon matrix, which provides shortened ion diffusion pathway, increased electrical conductivity, enhanced structural stability, and introduced surface/interface property.     

Activated hierarchical porous carbon@π-conjugated polymer composite as cathode for high-performance lithium storage

Organic compounds become promising candidates for cathodes of rechargeable lithium battery (RLB) due to the high theoretical capacity and improved safety. However, they exhibit low conductivity and easy dissolution in electrolyte, which leads to the low utilization of active materials and poor cycling stability of RLBs. Here, we synthesize a novel composite of activated hierarchical porous carbon supporting poly(1,5-diamino-anthraquinone) (aHPC@PDAA), using Ce(SO₄)₂ as oxidant and naphthalenesulfonic acid (NSA) as soft template for PDAA. The as-synthesized composite exhibits uniformly nanoporous structure with nano-sized PDAA particles distributed homogenously inside and outside of pores. The aHPC@PDAA cathode for RLBs achieves high electrochemical performance with a discharge capacity as much as 250 mAh g^?1 at the current density of 100 mA g^?1, which still maintains 176 mAh g^?1 after 2000 charging-discharging cycles.     

Carbonyl-rich Poly(pyrene-4,5,9,10-tetraone Sulfide) as Anode Materials for High-Performance Li and Na-Ion Batteries

Organic carbonyl electrode materials are widely employed for alkali metal-ion secondary batteries in terms of their sustainability, structure designability and abundant resources. As a typical redox-active organic electrode materials, pyrene-4, 5, 9, 10-tetraone (PT) shows high theoretical capacity due to the rich carbonyl active sites. But its electrochemical behavior in secondary batteries still needs further exploration. Herein, PT-based linear polymers (PPTS) is synthesized with thioether bond as bridging group and then employed as an anode material for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). As expected, PPTS shows improved conductivity and insolubility in the non-aqueous electrolyte. When used as an anode material for LIBs, PPTS delivers a high reversible specific capacity of 697.1 mAh g⁻¹ at 0.1 A g⁻¹ and good rate performance (335.4 mAh g⁻¹ at 1 A g⁻¹). Moreover, a reversible specific capacity of 205.2 mAh g⁻¹ at 0.05 A g⁻¹ could be obtained as an anode material for SIBs.