Flexible C−C Bonds: Reversible Expansion,Contraction, Formation,and Scission of Extremely Elongated Single Bonds

Since carbon–carbon (C−C) covalent bonds are rigid and robust, the bond length is, in general, nearly constant and depends only on the bond order and hybrid orbitals. We report herein direct visualization of the reversible expansion and contraction of a C(sp³)−C(sp³) single bond by light and heat. This flexibility of a C−C bond was demonstrated by X-ray analysis and Raman spectroscopy of hexaphenylethane (HPE)-type hydrocarbons with two spiro-dibenzocycloheptatriene units, the intramolecular [2+2] photocyclization of which and thermal cleavage of the resulting cyclobutane ring both occur in a single-crystalline phase. The force constant of the contracted C−C bond is 1.6 times greater than that of the expanded bond. Since formation of the cyclobutane ring and contraction of the C−C bond lower the HOMO level by approximately 1 eV, the oxidative properties of these HPEs with a flexible C−C bond can be deactivated/activated by light/heat.     

Formation of Short Zn−Zn Bonds Stabilized by Simple Cyanide and Isocyanide Ligands

Cyanogen diluted in argon was reacted with laser ablated Zn atoms to produce the NCZnCN and NCZnZnCN cyanides and higher energy isocyanides ZnNC, CNZnNC, and CNZnZnNC, which were isolated in excess argon at 4 K. These reaction products, identified from the matrix infrared spectra of their -CN and -NC chromophore ligand stretching modes, were confirmed by ¹³C and ¹⁵N isotopic substitution and comparison with frequencies calculated by the B3LYP and CCSD(T) methods using the all electron aug-cc-pVTZ basis sets. The cyanide and isocyanide products were increased markedly by mercury arc UV photolysis, which covers the zinc atomic absorption. The above electronic structure calculations that produce appropriate ligand frequencies for these dizinc products also provide their Zn−Zn bond lengths: CCSD(T) calculations find a short 2.367 Å Zn−Zn bond in the NCZnZnCN cyanide, a shorter 2.347 Å Zn−Zn bond in the 37.4 kJ mol⁻¹ higher energy isocyanide CNZnZnNC, and a longer 4.024 Å bond in the dizinc van der Waals dimer. Thus, the diatomic cyanide (-CN) and isocyanide (-NC) ligands are as capable of stabilizing the Zn−Zn bond as many much larger ligands based on their measured and our calculated Zn−Zn bond lengths. This is the first example of dizinc complexes stabilized by different ligand isomers. Additional weaker bands in this region can be assigned to the analogous trizinc molecules NCZnZnZnCN and CNZnZnZnNC.     

Enantioselective Borylation of Aromatic C−H Bonds with Chiral Dinitrogen Ligands

The borylation of C−H bonds catalyzed by transition metals has been investigated extensively in the past two decades, but no iridium-catalyzed enantioselective borylation of C−H bonds has been reported. We report a set of iridium-catalyzed enantioselective borylations of aromatic C−H bonds. This reaction relies on a set of newly developed chiral quinolyl oxazoline ligands. This process proceeds under mild conditions with good to excellent enantioselectivity, and the borylated products can be converted to enantioenriched derivatives containing new C−O, C−C, C−Cl, or C−Br bonds.     

Three-component Oxytrifluoromethylation of Alkenes: Highly Efficient and Regioselective Difunctionalization of CC Bonds Mediated by Photoredox Catalysts

Here comes the sun: A facile vicinal difunctionalization of alkenes, oxytrifluoromethylation, was established by visible-light-driven photoredox catalysis. Judicious choice of the CF(3) source is key. Nucleophiles such as water, alcohols, and carboxylic acids can be used in this highly efficient (2-4?h) and regioselective (100?%) transformation using light-emitting diode (LED) lamps and natural sunlight. SET=single-electron transfer.     

Efficient Selective Formation of C‐C Single Bonds and C˭C Double Bonds by NBS‐Promoted Oxidative Coupling of β‐Keto Esters

Abstract

A new application of NBS, which results in the oxidative coupling of β‐keto esters to selectively form C‐C single and C?C double bonds, can be controlled by the amount of NBS and t‐BuOK employed. This methodology adds a new entry to C‐C single and C?C double‐bond formation between active methylene groups under mild conditions with high selectivity.     

Amines as Catalysts: Dynamic Features and Kinetic Control of Catalytic Asymmetric Chemical Transformations to Form C−C Bonds and Complex Molecules

Carbonyl transformations involving enolates and/or enamines have been used for various types of bond-forming reactions. In this account, catalysts and catalyst systems that have amino acids or primary, secondary, and/or tertiary amines as key catalytic functional groups that we have developed to accelerate chemical transformations, including regio-, diastereo- and enantioselective reactions, are discussed. Our chemical transformation strategies and methods that use amine derivatives as catalysts are also discussed. As amines can have different functions depending on protonation and on the species formed during the catalysis (such as enamines and iminium ions), dynamics and kinetic controls are the keys for understanding the catalysis. Further, strategies that harness dynamic steps and kinetic control in amine-catalyzed reactions have enabled the synthesis of complex molecules in stereocontrolled manners. Understanding the dynamic features and the kinetic controls of the catalysis will further the design of the catalysts and the development of chemical transformation strategies and methods.     

Asymmetric Pd(II)-Catalyzed C−O,C−N,C−C Bond Formation Using Alkenes as Substrates: Insight into Recent Enantioselective Developments

This Review summarizes the advances in the catalytic enantioselective mono- and difunctionalization of alkenes, highlighting the fundamental role of ligands. Several types of asymmetric reactions have been developed involving different bonds formation, C−O, C−N and C−C, highlighting the urgency to go ahead in the search for new ligands and synthetic methodologies in order to improve the control over the reaction selectivity and activity and thus, to increase the applications in the synthesis of heterocyclic scaffolds and biologically active compounds. The Review is organized into paragraphs, which discuss the type of bond formed during the nucleopalladation, C−O, C−N, C−C bonds, and the type of reaction involved.     

Direct C−C Double Bond Cleavage of Alkenes Enabled by Highly Dispersed Cobalt Catalyst and Hydroxylamine

The utilization of a single-atom catalyst to break C−C bonds merges the merits of homogeneous and heterogeneous catalysis and presents an intriguing pathway for obtaining high-value-added products. Herein, a mild, selective, and sustainable oxidative cleavage of alkene to form oxime ether or nitrile was achieved by using atomically dispersed cobalt catalyst and hydroxylamine. Diversified substrate patterns, including symmetrical and unsymmetrical alkenes, di- and tri-substituted alkenes, and late-stage functionalization of complex alkenes were demonstrated. The reaction was successfully scaled up and demonstrated good performance in recycling experiments. The hot filtration test, catalyst poisoning and radical scavenger experiment, time kinetics, and studies on the reaction intermediate collectively pointed to a radical mechanism with cobalt/acid/O₂ promoted C−C bond cleavage as the key step.     

Carbon Monoxide Activation by a Molecular Aluminium Imide: C−O Bond Cleavage and C−C Bond Formation

Anionic molecular imide complexes of aluminium are accessible via a rational synthetic approach involving the reactions of organo azides with a potassium aluminyl reagent. In the case of K₂[( NON )Al(NDipp)]₂ ( NON =4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethyl-xanthene; Dipp=2,6-diisopropylphenyl) structural characterization by X-ray crystallography reveals a short Al−N distance, which is thought primarily to be due to the low coordinate nature of the nitrogen centre. The Al−N unit is highly polar, and capable of the activation of relatively inert chemical bonds, such as those found in dihydrogen and carbon monoxide. In the case of CO, uptake of two molecules of the substrate leads to C−C coupling and C≡O bond cleavage. Thermodynamically, this is driven, at least in part, by Al−O bond formation. Mechanistically, a combination of quantum chemical and experimental observations suggests that the reaction proceeds via exchange of the NR and O substituents through intermediates featuring an aluminium-bound isocyanate fragment.     

Enantioselective Copper(I)/Chiral Phosphoric Acid Catalyzed Intramolecular Amination of Allylic and Benzylic C−H Bonds

Radical-involved enantioselective oxidative C−H bond functionalization by a hydrogen-atom transfer (HAT) process has emerged as a promising method for accessing functionally diverse enantioenriched products, while asymmetric C(sp³)−H bond amination remains a formidable challenge. To address this problem, described herein is a dual Cu^I/chiral phosphoric acid (CPA) catalytic system for radical-involved enantioselective intramolecular C(sp³)−H amination of not only allylic positions but also benzylic positions with broad substrate scope. The use of 4-methoxy-NHPI (NHPI=N-hydroxyphthalimide) as a stable and chemoselective HAT mediator precursor is crucial for the fulfillment of this transformation. Preliminary mechanistic studies indicate that a crucial allylic or benzylic radical intermediate resulting from a HAT process is involved.     

Enantioselective Cleavage of Cyclobutanols Through Ir-Catalyzed C−C Bond Activation: Mechanistic and Synthetic Aspects

The Ir-catalyzed conversion of prochiral tert-cyclobutanols to β-methyl-substituted ketones proceeds under comparably mild conditions in toluene (45–110 °C) and is particularly suited for the enantioselective desymmetrization of β-oxy-substituted substrates to give products with a quaternary chirality center with up to 95 % ee using DTBM-SegPhos as a chiral ligand. Deuteration experiments and kinetic isotope effect measurements revealed major mechanistic differences to related Rh^I-catalyzed transformations. Supported by DFT calculations we propose the initial formation of an Ir^III hydride intermediate, which then undergoes a β-C elimination (C−C bond activation) prior to reductive C−H elimination. The computational model also allows the prediction of the stereochemical outcome. The Ir-catalyzed cyclobutanol cleavage is broadly applicable but fails for substrates bearing strongly coordinating groups. The method is of particular value for the stereo-controlled synthesis of substituted chromanes related to the tocopherols and other natural products.     

Nickel-Mediated Trifluoromethylation of Phenol Derivatives by Aryl C−O Bond Activation

The increasing pharmaceutical importance of trifluoromethylarenes has stimulated the development of more efficient trifluoromethylation reactions. Tremendous efforts have focused on copper- and palladium-mediated/catalyzed trifluoromethylation of aryl halides. In contrast, no general method exists for the conversion of widely available inert electrophiles, such as phenol derivatives, into the corresponding trifluoromethylated arenes. Reported herein is a practical nickel-mediated trifluoromethylation of phenol derivatives with readily available trimethyl(trifluoromethyl)silane (TMSCF₃). The strategy relies on PMe₃-promoted oxidative addition and transmetalation, and CCl₃CN-induced reductive elimination. The broad utility of this transformation has been demonstrated through the direct incorporation of trifluoromethyl into aromatic and heteroaromatic systems, including biorelevant compounds.     

Eco-Friendly Methodology for the Formation of Aromatic Carbon–Heteroatom Bonds by Using Green Ionic Liquids

A new sustainable method is reported for the formation of aromatic carbon–heteroatom bonds under solvent-free and mild conditions (no co-oxidant, no strong acid and no toxic reagents) by using a new type of green ionic liquid. The bromination of methoxy arenes was chosen as a model reaction. The reaction methodology is based on only using natural sodium bromine, which is transformed into an electrophilic brominating reagent within an ionic liquid, easily prepared from the melted salt FeCl₃ hexahydrate. Bromination reactions with this in-situ-generated reagent gave good yields and excellent regioselectivity under simple and environmentally friendly conditions. To understand the unusual bromine polarity reversal of sodium bromine without any strong oxidant, the molecular structure of the reaction medium was characterised by Raman and direct infusion electrospray ionisation mass spectroscopy (ESI-MS). An extensive computational investigation using density functional theory methods was performed to describe a mechanism that suggests indirect oxidation of Br⁻ through new iron adducts. The versatility of the methodology was successively applied to nitration and thiocyanation of methoxy arenes using KNO₃ and KSCN in melted hexahydrated FeCl₃.     

Regiodivergent and Enantioselective Hydroxylation of C−H bonds by Synergistic Use of Protein Engineering and Exogenous Dual-Functional Small Molecules

It is a great challenge to optionally access diverse hydroxylation products from a given substrate bearing multiple reaction sites of sp³ and sp² C−H bonds. Herein, we report the highly selective divergent hydroxylation of alkylbenzenes by an engineered P450 peroxygenase driven by a dual-functional small molecule (DFSM). Using combinations of various P450BM3 variants with DFSMs enabled access to more than half of all possible hydroxylated products from each substrate with excellent regioselectivity (up to >99 %), enantioselectivity (up to >99 % ee), and high total turnover numbers (up to 80963). Crystal structure analysis, molecular dynamic simulations, and theoretical calculations revealed that synergistic effects between exogenous DFSMs and the protein environment controlled regio- and enantioselectivity. This work has implications for exogenous-molecule-modulated enzymatic regiodivergent and enantioselective hydroxylation with potential applications in synthetic chemistry.     

Direct Trifluoromethylselenolation and Fluoroalkylselenolation of C−H Bonds: Recent Advances in Reagents Development and Reactions

Due to their high lipophilicity and strong electron-withdrawing property, more and more attention has been paid to introducing trifluoromethylseleno and fluoroalkylseleno moieties into organic molecules. In this short review, we categorize the synthesis of compounds that combine selenium and fluorinated moieties into two main types: trifluoromethylselenolation (CF₃Se) and fluoroalkylselenolation (R_fSe, except CF₃Se). This review aims to provide a summary of the recent advances in direct C−H trifluoromethylselenolation and fluoroalkylselenolation from the synthesis of trifluoromethylselenolation and fluoroalkylselenolation reagents to their application. Based on the method of how the R_fSe group was introduced, the main content is divided into three parts: transition-metal-free reactions, transition-metal-mediated/catalyzed reactions and photo-catalyzed reactions. The general substrate scope, mechanism and limitations would also be discussed so that we hope the review will serve as an inspiration for further research in this appealing research field.     

α- and β-Eliminations in Transition Metal Complexes: Strategies to Cleave Unstrained C−C and C−F Bonds

Oxidative addition is the standard process for single-bond activation in transition metal catalysis and it is known to operate for many types of bonds, but challenging σ-bonds e. g. C(sp³)−F and C(sp³)−C(sp³) bonds are the exceptions in this respect. This short review aims at demonstrating how both α- and β-eliminations may be better options for activation of unstrained C−F and C−C single bonds. Selected examples of such eliminations are presented with a mechanistic focus indicating how unstrained and unactivated C−C and C−F bonds can be broken by employing α- and β-eliminations in transition metal hydrocarbyl ligands. Our examples show that the reaction barrier in β-eliminations is controlled by the s-character of the participating bonds where a higher s-character gives a better overlap in the multi-center transition state thereby increasing the reactivity; still β-aryl eliminations can compete with the classical β-hydrogen eliminations in certain cases.     

Switchable Polymerization Triggered by Fast and Quantitative Insertion of Carbon Monoxide into Cobalt–Oxygen Bonds

A strategy that uses carbon monoxide (CO) as a molecular trigger to switch the polymerization mechanism of a cobalt Salen complex [salen=(R,R)-N,N′-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediamine] from ring-opening copolymerization (ROCOP) of epoxides/anhydrides to organometallic mediated controlled radical polymerization (OMRP) of acrylates is described. The key phenomenon is a rapid and quantitative insertion of CO into the Co−O bond, allowing for in situ transformation of the ROCOP active species (Salen)Co^III-OR into the OMRP photoinitiator (Salen)Co^III-CO₂R. The proposed mechanism, which involves CO coordination to (Salen)Co^III-OR and subsequent intramolecular rearrangement via migratory insertion has been rationalized by DFT calculations. Regulated by both CO and visible light, on-demand sequence control can be achieved for the one-pot synthesis of polyester-b-polyacrylate diblock copolymers (Đ<1.15).     

Enantioconvergent Palladium-Catalyzed Alkylation of Tertiary Allylic C−H Bonds

Enantioconvergent catalysis enables the conversion of racemic molecules into a single enantiomer in perfect yield and is considered an ideal approach for asymmetric synthesis. Despite remarkable advances in this field, enantioconvergent transformations of inert tertiary C−H bonds remain largely unexplored due to the high bond dissociation energy and the surrounding steric repulsion that pose unparalleled constraints on bond cleavage and formation. Here, we report an enantioconvergent Pd-catalyzed alkylation of racemic tertiary allylic C−H bonds of α-alkenes, providing a unique approach to access a broad range of enantioenriched γ,δ-unsaturated carbonyl compounds featuring quaternary carbon stereocenters. Mechanistic studies reveal that a stereoablative event occurs through the rate-limiting cleavage of tertiary allylic C−H bonds to generate σ-allyl-Pd species, and the achieved E/Z-selectivity of σ-allyl-Pd species effectively regulates the diastereoselectivity via a nucleophile coordination-enabled S_N2′-allylation pathway.     

Enantioselective Synthesis of C−O Axially Chiral Diaryl Ethers by NHC-Catalyzed Atroposelective Desymmetrization**

Axially chiral diaryl ethers, a distinguished class of atropisomers possessing unique dual C−O axis, hold immense potential for diverse research domains. In contrast to the catalytic enantioselective synthesis of conventional single axis bearing atropisomers, the atroposelective synthesis of axially chiral ethers containing flexible C−O axis remains a significant challenge. Herein, we demonstrate the first N-heterocyclic carbene (NHC)-catalyzed synthesis of axially chiral diaryl ethers via atroposelective esterification of dialdehyde-containing diaryl ethers. Mechanistically, the reaction proceeds via NHC-catalyzed desymmetrization strategy to afford the corresponding axially chiral diaryl ether atropisomers in good yields and high enantioselectivities under mild conditions. The derivatization of the synthesized product expands the utility of present strategy via access to a library of C−O axially chiral compounds. The temperature dependency and preliminary investigations on the racemization barrier of C−O bonds are also presented.     

Electrochemical Synthesis of Thienoacene Derivatives: Transition-Metal-Free Dehydrogenative C−S Coupling Promoted by a Halogen Mediator

The first electrochemical dehydrogenative C−S bond formation leading to thienoacene derivatives is described. Several thienoacene derivatives were synthesized by dehydrogenative C−H/S−H coupling. The addition of ⁿBu₄NBr, which catalytically promoted the reaction as a halogen mediator, was essential.