Optical bistability in GaInAsP/InP coupled-circular resonator microlasers

Optical bistability is realized in GaInAsP/InP coupled-circular resonator microlasers, which are fabricated by planar technology. For a coupled-circular resonator microlaser with the radius of 20?μm and a 2?μm-wide bus waveguide, hysteresis loops are observed for the output power coupling into an optical fiber versus the cw injection current at room temperature. The laser output spectra of the upper and lower states of the hysteresis loop indicate that the bistability is related to mode competitions. The optical bistability can be explained as the mode competition between the symmetry and antisymmetry coupled modes relative to the bus waveguide.     

Theory of gyrotropic ring resonators with counterpropagating modes coupling

The Faraday effect in ring resonators leads to the resonance splitting of clockwise and counter-clockwise propagating modes. In this work we investigate how this resonance splitting influences the ring resonator's behavior if both modes are coupled by a sidewall corrugation of the resonator. Coupled mode theory is used to evaluate the transmission and reflection characteristics of a ring resonator coupled to a waveguide. Based on these evaluations, we characterize a novel ring resonator switch. The resonance of the corrugated gyrotropic resonator coupled to a waveguide can be switched off by the application of the external magnetic field. In this case, the resonance is not shifted, as what typically occurs at small perturbations, but suppressed.     

Coupled-resonator optical waveguides doped with nanocrystals

Microsphere resonators doped with semiconductor nanocrystals are explored as building blocks for coupled-resonator optical waveguides (CROWs). The evolution of individual cavity modes into coherently coupled waveguide modes is studied using polarization-sensitive microphotoluminescence spectroscopy. To demonstrate the formation of multisphere photon states, we use a bent linear array of microresonators and probe the properties of the cavity photon field by the spatially and spectrally resolved measurement of the nanocrystal emission. Photon mode coupling is evidenced by the observed mode splitting and emission intensity distributions along the CROW structure.     

Analysis of directional emission in square resonator lasers with an output waveguide

Square microcavity laser with an output waveguide is proposed and analyzed by the finite-difference time-domain (FDTD) technique. For a square resonator with refractive index of 3.2, side length of 4 μm, and output waveguide of 0.4-μm width, we have got the quality factors (Q factors) of 6.7 × 102 and 7.3 × 103 for the fundamental and first-order transverse magnetic (TM) mode near the wavelength of 1.5 μm, respectively. The simulated intensity distribution for the first-order TM mode shows that the coupling efficiency in the waveguide reaches 53%. The numerical simulation shows that the first-order transverse modes have fairly high Q factor and high coupling efficiency to the output waveguide. Therefore the square resonator with an output waveguide is a promising candidate to realize single-mode directional emission microcavity lasers.     

Tunable plasmonic filter with circular metal–insulator– metal ring resonator containing double narrow gaps

Tunable filter based on two metal–insulator–metal (MIM) waveguides coupled to each other by a ring resonator with double narrow gaps is designed and numerically investigated by finite-difference time-domain (FDTD) simulations. The propagating modes of surface plasmon polaritons (SPPs) are studied. By introducing narrow gaps in ring resonators, the transmission in different resonance modes can be effectively adjusted by changing the gap width (g), and the transmitted peak wavelength has a nonlinear relationship with g. Another structure consisting two cascading ring resonators and regular MIM waveguide have also been proposed. The mechanism based on circular ring resonators with narrow gaps may provide a novel method for designing all-optical integrated components in optical communication and computing.     

Effect of diffraction on the electrodynamic characteristics of two-dimensional coaxial Bragg resonators

The electrodynamic properties of coaxial two-dimensional Bragg resonators with two-dimensional distributed feedback are analyzed. These resonators are made of coaxial waveguide sections with doubly periodic corrugation, which provides coupling and mutual scattering of four partial waves. Two of them propagate along the waveguide, while the other two propagate in the transverse (azimuthal) direction. It is shown that the high azimuthal index selectivity of two-dimensional Bragg resonators may be related to a qualitative difference in topology of the dispersion characteristics of azimuth-symmetric and asymmetric normal waves propagating in infinite waveguides of such a geometry. For the finite-length systems used as two-dimensional Bragg resonators, the eigenmode spectrum is found for two types of boundary conditions that correspond to the limiting cases of perfectly matched (open) systems and, conversely, of systems closed for the extraction of transverse electromagnetic fluxes. Perimeter-to-length ratios of the resonator at which the Q factor of the fundamental azimuth-symmetric mode is greater than those of the other modes are determined. The applicability domain of the geometrical approach, which was earlier applied to two-dimensional Bragg resonators, is discussed.     

Optimization of optical ring resonator devices for sensing applications

The Q-factor of an optical resonance device determines the width of its transmission resonances. For this reason, in sensing applications of optical resonators, it is commonly assumed that the Q-factor fully determines resonator sensitivity. Practically, the latter is not exactly correct. In this Letter, the parameters responsible for the sensitivity of resonance devices (i.e., the steepness and the sharpness of the transmission resonance) are analyzed. It is shown that, for given intrinsic losses of a single ring resonator sensor, the slope of the resonance is largest if its extinction ratio is 9.5 dB, while the resonance is sharpest if its extinction ratio is 6 dB. For a sensor consisting of several identical ring resonators coupled to a bus waveguide, the largest slope and sharpness parameters correspond to the extinction ratios of ~9 dB and ~4.5 dB, respectively. The determined optimum parameters can be achieved by tuning the coupling between the resonator rings and the waveguide.     

并联谐振腔光子晶体单通道侧面耦合波导

分析了多光子晶体谐振腔的并联耦合模理论,并根据该理论设计了单通道光子晶体侧面耦合波导以实现光子晶体器件与光源间的高效耦合。理论研究表明并联谐振腔的耦合效率与谐振腔数量、间距以及品质因子相关。经优化耦合面积和耦合效率,最终选择了5个谐振腔并联作为单通道侧面耦合波导的耦合部分。通过设置谐振腔间距改变其对称性,从而实现侧面耦合波导的单通道传播。在1.55μm工作波长下,单通道侧面耦合波导的耦合效率可达94.49%。     

高下路空气孔型光子晶体环形谐振腔的设计

提出一种基于二维正方晶格光子晶体空气孔型高下路效率的环形谐振腔,通过压缩线缺陷波导的宽度实现单模有效控制,同时讨论内围光子晶体列数对传输场的影响,然后运用二维时域有限差分方法数值分析了耦合强度及环区局部折射率调制对下路效率、品质因子以及下路波长等参量的影响.结果表明:当波导宽度为0.7个晶格常量,耦合强度为0个晶格常量,在信道波长为1 528.1nm时,下路效率为99%,品质因子Q为379;当耦合强度提高到1个晶格常量,下路波长稍微漂移为1 524.3nm,品质因子显著提高到1 397,而下路效率下降为89%.同时,下路波长会随着环区折射率的增加呈线性红移.     

Coupling and level repulsion in the localized regime: from isolated to quasiextended modes

We study the interaction of Anderson localized states in an open 1D random system by varying the internal structure of the sample. As the frequencies of two states come close, they are transformed into multiply peaked quasiextended modes. Level repulsion is observed experimentally and explained within a model of coupled resonators. The spectral and spatial evolution of the coupled modes is described in terms of the coupling coefficient and Q factors of resonators.     

Oscillations at a difference frequency in the middle and far infrareds in GaP semiconductor waveguides

The feasibility of oscillation at a difference frequency in the middle and far infrareds is considered under the condition of phase matching between a nonlinear polarization wave and a difference mode produced by two fundamental modes with a wavelength near 1 μm excited in a GaP dielectric waveguide. With 10-W short-wave modes propagating in a 100-μm-wide planar waveguide, the power of the difference mode can be as high as 300 μW at 1–8 THz at room temperature. When the GaP waveguide leans upon a silicon substrate, the power of the difference mode may reach 5 mW at 10–14 THz at the same temperatures.     

高下路空气孔型光子晶体环形谐振腔的设计

提出一种基于二维正方晶格光子晶体空气孔型高下路效率的环形谐振腔,通过压缩线缺陷波导的宽度实现单模有效控制,同时讨论内围光子晶体列数对传输场的影响,然后运用二维时域有限差分方法数值分析了耦合强度及环区局部折射率调制对下路效率、品质因子以及下路波长等参量的影响.结果表明:当波导宽度为0.7个晶格常量,耦合强度为0个晶格常量,在信道波长为1 528.1 nm时,下路效率为99%,品质因子Q为379;当耦合强度提高到1个晶格常量,下路波长稍微漂移为1 524.3 nm,品质因子显著提高到1 397,而下路效率下降为89%.同时,下路波长会随着环区折射率的增加呈线性红移.     

All-optical set-reset flip-flop based on frequency bistability in semiconductor microring lasers

The electric field of the modes of semiconductor microring lasers (SMRLs) in the presence of bus waveguide reflections are linear combinations of the clock wise (CW) and the counter clock wise (CCW) electric fields. The mode structures can be controlled by the waveguide reflection coefficients. The power ratio and phase difference of the CW and CCW fields of one mode is proportional to the ratio of the reflection coefficients of the left and right waveguides. It is shown that the degenerate CW and CCW modes in the presence of bus waveguide reflections are split into two modes with different frequencies. Employing these new modes, SMRL can be used as an element to design flip-flops used in photonic integrated circuits. For a symmetric structure, the inter-frequencies of CW and CCW waves relating to each mode can be considered as the output of the optical flip-flop. Output of asymmetric mode is zero while the symmetric mode has a nonzero output.     

Modeling of grating assisted standing wave,microresonators for filter applications in integrated optics

A wide, multimode segment of a dielectric optical waveguide, enclosed by Bragg reflectors and evanescently coupled to adjacent port waveguides, can constitute the cavity in an integrated optical microresonator. It turns out that the device can be described adequately in terms of an approximate coupled mode theory model which involves only a few guided modes as basis fields. By reasoning along the coupled mode model, we motivate a simple design strategy for the resonator device. Rigorous two dimensional mode expansion simulations are applied to verify the predictions of the approximate model. The results exemplify the specific spectral response of the standing wave resonators. As refinements we discuss the single resonance of a device with nonsymmetrically detuned Bragg reflectors, and the cascading of two Fabry–Perot cavities, where the coupling across an intermediate shorter grating region establishes a power transfer characteristic that is suitable for an add-drop filter.     

140-GHz gyrotron experiments based on a confocal cavity

We have designed and experimentally demonstrated the operation of a novel quasioptical gyrotron oscillator based on an overmoded confocal waveguide cavity. This cavity effectively suppresses undesired modes, and therefore has extremely low mode density. Stable single-mode, single-frequency operation was achieved in the TE₀₆ mode at 136 GHz. A peak RF output power of 66 kW, corresponding to an efficiency of 18%, was measured. By varying the cavity magnetic field, high-power generation was observed at 136 GHz in the TE₀₆ mode and at 114 GHz in the TE₀₅ mode. These frequencies correspond to the high Q modes of the confocal resonator. The low Q modes were either weak or not observed. In this paper, we will review the design procedure for this cavity and present experimental data verifying its effectiveness in reducing the number of modes that can be excited. The confocal waveguide could also be used in high-power, gyro-TWT amplifiers to provide greater operating stability and bandwidth, especially in an overmoded waveguide structure     

Guided subwavelength slow-light mode supported by a plasmonic waveguide system

We introduce a plasmonic waveguide system, which supports a subwavelength broadband slow-light guided mode with a tunable slowdown factor at a given wavelength. The system consists of a metal-dielectric-metal (MDM) waveguide side-coupled to a periodic array of MDM stub resonators. The slowdown factor at a given wavelength can be tuned by adjusting the geometrical parameters of the system. In addition, there is a trade-off between the slowdown factor and the propagation length of the supported optical mode. Finally, we show that light can be coupled efficiently from a conventional MDM waveguide to the plasmonic waveguide system.     

Two-dimensional imaging of two types of radicals by the CW-EPR method

New EPR resonators were developed by using a ceramic material with a high dielectric constant, epsilon=160. The resonators have a high quality factor, Q=10(3), and enhance the sensitivity of an EPR spectrometer up to 170 times. Some advantages of the new ceramic resonators are: (1) cheaper synthesis and simplified fabricating technology; (2) wider temperature range; and (3) ease of use. The ceramic material is produced with a titanate of complex oxides of rare-earth and alkaline metals, and has a perovskite type structure. The resonators were tested with X-band EPR spectrometers with cylindrical (TE(011)) and rectangular (TE(102)) cavities at 300 and 77K. We discovered that EPR signal strength enhancement depends on the dielectric constant of the material, resonator geometry and the size of the sample. Also, an unusual resonant mode was found in the dielectric resonator-metallic cavity structure. In this mode, the directions of microwave magnetic fields of the coupled resonators are opposite and the resonant frequency of the structure is higher than the frequency of empty metallic cavity.     

Photonic crystal bends and power splitters based on ring resonators

In this paper, theoretical and numerical analysis of low-loss right angle waveguide bends and T-junctions based on ultra-compact photonic crystal ring resonators (PCRR) is presented. Desirable characteristics are obtained by designing the waveguide bends and T-junctions as low-Q resonant cavities with certain symmetries and small radiation loss. A simple analysis, based on coupled mode theory (CMT) in time, is used to explain the operation principles which agree qualitatively with the numerical results. These structures have high transmission efficiency over a large bandwidth in third communication window. Also effects of changing the ring size on power splitter transmission characteristics are discussed. The perfect transmission and zero reflection conditions are discussed by applying coupled mode theory. Results obtained by the finite difference time domain (FDTD) simulations are consistent with those from the coupled mode theory.     

Mode cycling in microring optical resonators

Electromagnetic resonators are important not only as realizable models of fundamental concepts in classical and quantum physics, based on the existence and properties of eigenmodes, but also in the practical design of lasers, amplifiers, sensors, filters, and delay lines. Coupled-eigenmode systems may be realized via the multiple eigenmodes of a single resonator or by the coupling of a mode across multiple resonators. Mode cycling is demonstrated as a distinct concept of sequential population transfer in coupled multiple-eigenvalue resonators. Based on this principle, a coupled polymeric microring resonator interferometer is fabricated and characterized; the device achieves greater than 30 dB extinction and (loaded) Q approximately 5.5 x 10(3).     

Multi-layer cladding leaky planar waveguide for high-power applications

We design a multi-layer cladding large-core planar waveguide that supports a single guided mode. The waveguide works on the principle of higher-order mode discrimination. The cladding of the waveguide is formed by alternate low- and high- index regions, which helps leaking out of higher-order modes while retaining the fundamental mode over the entire length of the waveguide. The structure is analyzed by the transfer-matrix method and the leakage losses of the modes have been calculated. We show that a waveguide formed in silica with numerical aperture 0.24 and core width 10 μm can be designed to exhibit single-mode operation at 1550-nm wavelength. Such a structure should find applications in high-power planar waveguide lasers and amplifiers.