Ultrafast Terahertz Probes of Charge Transfer and Recombination Pathway of CH_3NH_3PbI_3 Perovskites

We use transient terahertz photoconductivity measurements to demonstrate that upon optical excitation of CH_3NH_3PbI_3 perovskite, the hole transfer from CH_3NH_3PbI_3 into the organic hole-transporting material(HTM)Spiro-OMe TAD occurs on a sub-picosecond timescale. Second-order recombination is the dominant decay pathway at higher photo-excitation fluences as observed in neat CH_3NH_3PbI_3 films. In contrast, under similar experimental conditions, second-order recombination weakly contributes the relatively slow recombination between the electrons in the perovskite and the injected holes in HTM, as a loss mechanism at the CH_3NH_3PbI_3/Spiro-OMe TAD interface. Our results offer insights into the intrinsic photophysics of CH_3NH_3PbI_3-based perovskites with direct implications for photovoltaic devices and optoelectronic applications.     

Intrinsic Instability of the Hybrid Halide Perovskite Semiconductor CH_3NH_3PbI_3

The organic-inorganic hybrid perovskite CH_3NH_3PbI_3 has attracted significant interest for its high performance in converting solar light into electrical power with an efficiency exceeding 20%. Unfortunately, chemical stability is one major challenge in the development of CH_3NH_3PbI_3 solar cells. It was commonly assumed that moisture or oxygen in the environment causes the poor stability of hybrid halide perovskites, however, here we show from the first-principles calculations that the room-temperature tetragonal phase of CH_3NH_3PbI_3 is thermodynamically unstable with respect to the phase separation into CH_3NH_3I + PbI_2, i.e., the disproportionation is exothermic,independent of the humidity or oxygen in the atmosphere. When the structure is distorted to the low-temperature orthorhombic phase, the energetic cost of separation increases, but remains small. Contributions from vibrational and configurational entropy at room temperature have been considered, but the instability of CH_3NH_3PbI_3 is unchanged. When I is replaced by Br or Cl, Pb by Sn, or the organic cation CH_3NH_3 by inorganic Cs, the perovskites become more stable and do not phase-separate spontaneously. Our study highlights that the poor chemical stability is intrinsic to CH_3NH_3PbI_3 and suggests that element-substitution may solve the chemical stability problem in hybrid halide perovskite solar cells.     

Importance of PbI_2 morphology in two-step deposition of CH_3NH_3PbI_3 for high-performance perovskite solar cells

Controlling the morphology of the perovskite film is an effective way to improve the photoelectric conversion efficiency of solar cell devices. In this work, we study the influence of the crystallization condition on PbI_2 morphology and the performances of resulting perovskite solar cells. The PbI_2 morphologies and coverage rates under different formation conditions such as solvent effect, slow crystallization at room temperature and substrate-preheating, are found to be of crucial importance for preparing high-quality perovskite. The generation of loosely packed disk-like PbI_2 film with interpenetrating nanopores promotes the penetration of methyl ammonium iodide(MAI), leading to a better crystallinity of the perovskite film, and a best repeatable power conversion efficiency of 11.59% is achieved when methyl ammonium lead triiodide(CH_3NH_3PbI_3, MAPbI_3) is employed. In addition, an excellent device is also obtained with an efficiency of more than 93% to remain after working for 43 days.     

Improvement of Photoluminescence of Perovskite CH_3NH_3Pb I_3 by Adding Additional CH_3NH_3I during Grinding

The organic-inorganic hybrid perovskite CH_3NH_3PbI_3 has been a good candidate for many optoelectronic applications such as light-emitting diodes due to its unique properties.Optimizing the optical properties of the CH_3NH_3PbI_3 material to improve the device performance is a hot topic.Herein,a new strategy is proposed to enhance the light emission of CH_3NH_3PbI_3 phosphor effectively.By adding the reactant CH_3NH_3I powder in an appropriate proportion and simply grinding,the emission intensity of CH_3NH_3PbI_3 is greatly improved.The advantages of the proposed method are swiftness,simplicity and reproducibility,and no requirement for a complex organic ligand.The mechanism of this phenomenon is revealed by x-ray diffraction,scanning electron microscopy,energy dispersive spectroscopy,photoluminescence,and temperature-dependent photoluminescence.This study offers a unique insight for optimizing the optical properties of halide perovskite materials.     

CH_3NH_3 Formed by Electron Injection at Heterojunction Inducing Peculiar Properties of CH_3NH_3PbI_3 Material

The effect of formed CH_3NH_3 at the heterojunction on properties of CH_3NH_3PbI_3 material is investigated based on experiment and theoretical calculation. Our calculation results show that the giant dielectric constant, anomalous hysteresis and long-lasting polarization for CH_3NH_3PbI_3 originate from the formed CH_3NH_3 at the heterojunction. It is found that the induced weak EPS by the reorientation of CH_3NH_3 sub-group along the built-in electric field enables us to effectively increase the ordering of entire lead-halide framework. In addition, the heterojunction has an advantage of channel separation between carrier transport and electron diffusion. These properties of the heterojunction are the main origin of the high efficiency of CH_3NH_3PbI_3 solar cells.     

Device simulation of lead-free CH_3NH_3SnI_3 perovskite solar cells with high efficiency

The lead-free perovskite solar cells(PSCs) have drawn a great deal of research interest due to the Pb toxicity of the lead halide perovskite.CH_3NH_3SnI_3 is a viable alternative to CH_3NH_3PbX_3,because it has a narrower band gap of 1.3 eV and a wider visible absorption spectrum than the lead halide perovskite.The progress of fabricating tin iodide PSCs with good stability has stimulated the studies of these CH_3NH_3SnI_3 based cells greatly.In the paper,we study the influences of various parameters on the solar cell performance through theoretical analysis and device simulation.It is found in the simulation that the solar cell performance can be improved to some extent by adjusting the doping concentration of the perovskite absorption layer and the electron affinity of the buffer and HTM,while the reduction of the defect density of the perovskite absorption layer significantly improves the cell performance.By further optimizing the parameters of the doping concentration(1.3 × 10~(16) cm~3) and the defect density(1 × 10~(15) cm~3) of perovskite absorption layer,and the electron affinity of buffer(4.0 eV) and HTM(2.6 eV),we finally obtain some encouraging results of the J_(sc) of 31.59 mA/cm~2,V_(oc) of 0.92 V,FF of 79.99%,and PCE of 23.36%.The results show that the lead-free CH_3NH_3SnI_3 PSC is a potential environmentally friendly solar cell with high efficiency.Improving the Sn~(2+) stability and reducing the defect density of CH_3NH_3SnI_3 are key issues for the future research,which can be solved by improving the fabrication and encapsulation process of the cell.     

蒸汽辅助溶液过程制备钙钛矿材料及钙钛矿太阳能电池

有机无机杂化钙钛矿材料被广泛应用于光电器件领域,特别是其作为太阳能电池的吸光材料,受到学术界和工业界越来越多的关注。钙钛矿太阳能电池的产业化进程正在进行中,而在进一步降低制备成本、提高电池转换效率的同时,研究出一种操作简单且可重复性高的制备钙钛矿薄膜的技术具有十分重要的意义。与其他传统的溶液处理方法不同,蒸汽辅助溶液过程(VASP)处理法避免了薄膜在生长过程中溶解以及溶剂化作用,抑制了晶核的形成,使薄膜快速重组,获得致密的高质量钙钛矿薄膜。目前报道,基于此薄膜制备的平面结构钙钛矿太阳能电池转换效率高达16.8%。本文综述了低温(150℃)VASP法制备的钙钛矿薄膜及光伏器件的相关研究进展,并对该技术的产业化前景做了展望。VASP制备过程简单、薄膜性能优异且可重复性高,为进一步制备大面积、高质量薄膜提供了可能。     

Fabrication of mixed perovskite organic cation thin films via controllable cation exchange

Here in this paper, we demonstrate a facile technique for creating the mixed formamidinium(HN = CHNH_3~+, FA~+)and methylammonium(CH_3NH_3~+, MA~+) cations in the lead iodide perovskite. This technique entails a facile drop-casting of formamidinium iodide(FAI) solutions on as-prepared MAPbI_3 perovskite thin films under the controlled conditions,which leads to controllable displacement of the MA~+ cations by FA~+ cations in the perovskite structure at room temperature. Uniform and controllable mixed organic cation perovskite thin films without a "bi-layered" or graded structure are achieved. By applying this approach to photovoltaic devices, we are able to improve the performances of devices through extending their optical-absorption onset further into the infrared region to enhance solar-light harvesting. Additionally,this work provides a simple and efficient technique to tune the structural, electrical, and optoelectronic properties of the light-harvesting materials for high-performance perovskite solar cells.     

First-principles hybrid functional study of the electronic structure and charge carrier mobility in perovskite CH_3NH_3SnI_3

We calculate the electronic properties and carrier mobility of perovskite CH_3NH_3SnI_3 as a solar cell absorber by using the hybrid functional method. The calculated result shows that the electron and hole mobilities have anisotropies with a large magnitude of 1.4 × 10~4cm~2·V~(-1)·s~(-1) along the y direction. In view of the huge difference between hole and electron mobilities, the perovskite CH3NH3 Sn I3can be considered as a p-type semiconductor. We also discover a relationship between the effective mass anisotropy and electronic occupation anisotropy. The above results can provide reliable guidance for its experimental applications in electronics and optoelectronics.     

Fluorescence Enhancement of Metal-Capped Perovskite CH_3NH_3PbI_3 Thin Films

We fabricate nano-structural metal films to improve photoluminescence of perovskite films. When the perovskite film is placed on an ammonia-treated alumina film, stronger photoluminescence is found due to local field enhancement effects. In addition, the oxide spacer layer between the metal(e.g.,Al, Ag and Au) substrate and the perovskite film plays an important role. The simulations and experiments imply that the enhancement is related to surface plasmons of nano-structural metals.     

新型空穴传输材料在钙钛矿太阳能电池中的研究进展

钙钛矿太阳能电池是一种全新的全固态薄膜电池. 报道的能量转换效率已提高到19.3%, 成为可再生能源领域的热点研究方向. 空穴传输材料是构成高效钙钛矿太阳能电池的重要组分之一. 本文介绍了钙钛矿太阳能电池的基本结构, 对空穴传输材料的分子结构、能级水平和迁移率等对电池性能的影响进行了详细的总结和评述.     

Improving the performance of perovskite solar cells with glycerol-doped PEDOT:PSS buffer layer

In this paper, we investigate the effects of glycerol doping on transmittance, conductivity and surface morphology of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate))(PEDOT:PSS) and its influence on the performance of perovskite solar cells.. The conductivity of PEDOT:PSS is improved obviously by doping glycerol. The maximum of the conductivity is 0.89 S/cm when the doping concentration reaches 6 wt%, which increases about 127 times compared with undoped. The perovskite solar cells are fabricated with a configuration of indium tin oxide(ITO)/PEDOT:PSS/CH_3NH_3PbI_3/PC_(61)BM/Al, where PEDOT:PSS and PC_(61)BM are used as hole and electron transport layers, respectively. The results show an improvement of hole charge transport as well as an increase of short-circuit current density and a reduction of series resistance, owing to the higher conductivity of the doped PEDOT:PSS. Consequently, it improves the whole performance of perovskite solar cell. The power conversion efficiency(PCE) of the device is improved from 8.57% to 11.03% under AM 1.5 G(100 mW/cm~2 illumination) after the buffer layer has been modified.     

A periodic DFT study on adsorption of small molecules(CH_4,CO,H_2O,H_2S,NH_3)on the WO_3(001) surface-supported Au

Gas molecules(such as CH4,CO,H2O,H2S,NH_3)adsorption on the pure and Au-doped WO3(001)surface have been studied by Density functional theory calculations with generalized gradient approximation.Based on the the calculation of adsorption energy,we found the most stable adsorption site for gas molecules by comparing the adsorption energies of different gas molecules on the WO3(001)surface.We have also compared the adsorption energy of five different gas molecules on the WO3(001)surface,our calculation results show that when the five kinds of gases are adsorbed on the pure WO3(001)surface,the order of the surface adsorption energy is CO>H2S>CH4>H2O>NH3.And the results show that NH3 is the most easily adsorbed gas among the other four gases adsorbed on the surface of pure WO3(001)surface.We also calculated the five different gases on the Au-doped WO3(001)surface.The order of adsorption energy was found to be different from the previous calculation:CO>CH4>H2S>H2O>NH3.These results provide a new route for the potential applications of Au-doped WO3 in gas molecules adsorption.     

钙钛矿太阳电池综述

基于有机-无机杂化钙钛矿材料(CH₃NH₃PbX₃)制备的太阳电池效率自2009年从3.8%增长到19.6%, 因其较高的光吸收系数, 较低的成本及易于制备等优势获得了广泛关注. 钙钛矿材料不仅可以作为光吸收层, 还可用作电子和空穴传输层, 以此制备出不同结构的钙钛矿太阳电池: 介孔结构、介观超结构、平面结构、无HTM层结构和有机结构. 除此之外, 钙钛矿材料制备方法的多样性使其更具吸引力, 目前已有一步溶液法、两步连续沉积法、双源共蒸发法和溶液-气相沉积法. 本文主要介绍了钙钛矿太阳电池的发展历程、工作原理及钙钛矿薄膜的制备方法等. 详细阐述了电池每一层的具体作用和针对现有的钙钛矿结构各层材料的优化, 最后介绍了钙钛矿太阳电池所面临的问题和发展前景, 以期对钙钛矿太阳电池有进一步的了解, 为制备新型高效的钙钛矿太阳电池打下坚实的基础.     

A Simple Deposition Method for Self-Assembling Single Crystalline Hybrid Perovskite Nanostructures

A sequential deposition method is developed, where the hybrid organic-inorganic halide perovskite(CH_3 NH_3Pb(I_(1-x)Br_x)_3) is synthesized using precursor solutions containing CH_3NH_3I and PbBr_2 with different mole ratios and reaction times. The perovskite achieved here is quite stable in the atmosphere for a relatively long time without noticeable degradation, and the perovskite nanowires are proved to be single crystalline structure, based on transmission electron microscopy. Furthermore, strong red photoluminescence from perovskite is observed in the wavelength range from 746 nm to 770 nm with the increase of the reaction time, on account of the exchanges between I-ions and Br~-ions in the perovskite crystal. Lastly, the influences of concentration and reaction time of the precursor solutions are discussed, which are important for evolution of hybrid perovskite from nanocuboid to nanowire and nanosheet.     

Low-temperature-processed ZnO thin films as electron transporting layer to achieve stable perovskite solar cells

Morphology and surface property of ZnO thin films as electron transporting layer in perovskite solar cells are crucial for obtaining high-efficient and stable perovskite solar cells. In this work, two different preparation methods of ZnO thin films were carried out and the photovoltaic performances of the subsequent perovskite solar cells were investigated. ZnO thin film prepared by sol–gel method was homogenous but provided high series resistance in solar cells, leading to low short circuit current density. Lower series resistance of solar cell was obtained from homogeneous ZnO thin film from spin-coating of colloidal ZnO nanoparticles (synthesized by hydrolysis–condensation) in a mixture of 1-butanol, chloroform and methanol. The perovskite solar cells using this film achieved the highest power conversion efficiency (PCE) of 4.79% when poly(3-hexylthiophene) was used as a hole transporting layer. In addition, the stability of perovskite solar cells was also examined by measuring the photovoltaic characteristic for six consecutive weeks with the interval of 2 weeks. It was found that using double layers of the sol–gel ZnO and ZnO nanoparticles provided better stability with no degradation of PCE in 10 weeks. Therefore, this work provides a simple method for preparing homogeneous ZnO thin films in order to achieve stable perovskite solar cells, also for controlling their surface properties which help better understand the characteristics of perovskite solar cells.     

低温太阳热与甲醇化学链整合能量释放机理实验初探

本文在低温太阳热能与CH3OH-Fe2O3化学链燃烧相结合控制CO2分离动力系统的基础上,进一步探讨了低温太阳热能品位提升的内在规律,分别揭示出辐照强度与CH3OH-Fe2O3反应特性、低温太阳热能品位提升的关联关系.本文采用溶胶凝胶法制作了Fe2O3反应颗粒,在热重反应器中进行了模拟太阳热能与甲醇化学链实验的初步研究,通过电镜,分析了反应前后金属氧化物的表面形貌特征.研究成果将为低温太阳热能与化学链燃烧整合能量释放新机理的研究提供理论依据和基础实验数据.     

高效无空穴传输层碳基钙钛矿太阳能电池的制备与性能研究

碳基钙钛矿太阳能电池因稳定性高、成本低廉而备受关注,但由于钙钛矿与碳电极之间能级匹配度不高,界面阻力大而导致效率不及金属基钙钛矿太阳能电池.本文制备了碳基无空穴传输层FTO/c-TiO₂/m-TiO₂/CH₃NH₃PbI₃/Carbon电池结构.通过对介孔二氧化钛层、钙钛矿层厚度进行优化,并对钙钛矿的薄膜形貌及钙钛矿激发电子寿命、可见光吸收度、载流子的提取与分离等进行深度分析,讨论了电池效率提升的内在机理.当介孔氧化钛层和钙钛矿层达到最优厚度时,钙钛矿太阳能电池获得了开路电压（V_oc）为0.93 V、电流密度（J_sc）为21.75 mA/cm²、填充因子为55%、光电转化效率达到11.11%.同时对电池进行了稳定性研究,在室温湿度为40%–50%的条件下放置15 d电池性能依旧稳定保持原来的95%,优于金属基钙钛矿太阳能电池,从而为碳电极钙钛矿太阳能电池的商业化发展提供了可能.     

Enhance the performance and stability of methylammonium lead iodide perovskite solar cells with guanidinium thiocyanate additive

Employing additive to regulate the morphology of perovskite film is an effective method to enhance both the power conversion efficiency and long term stability of organic-inorganic hybrid perovskite solar cells. Here, we demonstrate that guanidinium thiocyanate (GuSCN) is a suitable additive for methylammonium lead iodide (MAPbI₃) perovskite materials. Addition of GuSCN into MAPbI₃ can simultaneously enhance the crystallinity, enlarge the crystal size, and reduce the trap density of the perovskite films. As a result, the MAPbI₃ perovskite with 10% GuSCN exhibits superior power conversion efficiency of 16.70% compared to the pristine MAPbI₃ perovskite solar cell (15.57%). At the same time, the MAPbI₃ perovskite solar cell with GuSCN additive shows better stability, power conversion efficiency retains ～90% of its initial value compared to only ～60% for pristine MAPbI₃ perovskite solar cells after being stored for 15 days without encapsulation.     

利用MOCVD技术生长As掺杂的p-ZnMgO薄膜

利用GaAs夹层掺杂的新方法,采用金属有机化学气相沉积(MOVCD)技术,通过控制生长温度,在蓝宝石衬底上成功制备出As掺杂的p型ZnMgO薄膜.利用X射线衍射分析(XRD)、霍尔效应测试和光致发光(PL)谱等表征方法对薄膜的晶体结构、电学性能和光学特性进行分析.结果表明:高温生长的ZnMgO薄膜具有良好的c轴取向性;...