微纳粒子光学散射分析

为实现利用光学方式对微纳尺度粒子性质的研究,探讨了亚微米线及亚微米球对光电磁波的散射效应.微纳米尺度粒子的光学散射,散射粒子尺寸与入射光波长尺寸可满足米氏(Mie)散射条件.利用Matlab数值模拟的方式,将分析结果以模拟图的形式清晰地展现出来.满足尺寸条件的层状粒子以及任意多个散射粒子存在时对电磁波的散射都可采用Mie散射分析方法,并且针对多粒子散射,分析了散射体位于不同位置时对散射造成的影响.通过分析光学散射光场相关的微分散射截面及近场散射电磁场分布,可得出散射光场随散射角度的变化趋势,以及散射光场受各类因素的影响,包括入射光偏振态、散射粒子尺寸、散射粒子结构及粒子构成层数、散射粒子数量等的影响,也包括一些隐含因素对散射光场的影响,如散射粒子与周围介质的相对折射率.本文的科学意义体现在:与入射光波长尺寸可比的亚微米尺度的粒子,可用作传感器,对于其位移的探测可通过光学方式来实现,而由于粒子本身特性对散射光的影响具有一定的参考价值,从而使通过光学方式对机械位移的读出具有更高准确度.研究结果对于光学方式探测亚微米线机械振动具有指导意义.     

超光滑基片表面散射的数值研究

以一阶微分散射理论为基础,从理论和模拟两个方面对超光滑基片表面的散射电磁场进行了数值研究.分析了s偏振光和p偏振光的微分散射随入射角和散射角的分布情况.研究发现,当入射角较大时,p偏振光在某个散射方向的微分散射为0,而无论入射角和散射角如何变化,s偏振光的微分散射均大于0.当用光散射法对超光滑基片进行表面测试时,相对于...     

气溶胶凝聚粒子散射特性的数值计算

利用Cluster-cluster aggregation (CCA)模型,模拟了由相同数目球形原始微粒凝聚而成的四种随机取向气溶胶凝聚粒子．根据物质的电结构,将气溶胶凝聚粒子离散为一系列偶极子,结合离散偶极子近似方法,在获得每一个偶极子的电偶极矩之后,数值计算了气溶胶凝聚粒子散射强度的角分布,并分析了散射强度随入射光入射角度和气溶胶凝聚粒子尺寸参数变化的规律．结果显示：当散射角较小时,气溶胶凝聚粒子取向和入射光的入射角度对散射强度影响不大,当散射角增大时,散射强度则明显依赖于气溶胶凝聚粒子取向和入射光的入射角度;对于不同尺寸参数的气溶胶凝聚粒子,在同一角度入射情况下,随尺寸参数的增加,气溶胶凝聚粒子的散射主要集中于前向散射．     

取向比对椭球气溶胶粒子散射特性的影响

利用T矩阵和离散坐标法研究了取向比对椭球粒子散射特性的影响, 计算了小尺度范围内椭球粒子的散射特征参量, 包括消光效率因子、不对称因子、单次散射反照率、散射相矩阵及双向反射函数(BRDF). 结果表明, 椭球粒子的散射特性与取向比密切相关, 粒子取向比会影响散射参量的振荡频率和振幅, 与球形粒子散射参量的相对差异也呈周期振荡趋势. 研究还发现, 某些特殊粒子尺寸的散射参量与粒子取向比基本无关. 在多次散射条件下, 分析不同取向比粒子群的BRDF随反射角和光学厚度的变化特性. 结果显示: 不同取向比粒子群的BRDF随反射角的变化趋势基本一致, 球形粒子群比非球形粒子群的BRDF曲线波动振幅更大; 球形-非球形粒子的BRDF相对差异随光学厚度和取向比的增大而减小, 随入射角的增大而增大.     

Light absorption by island metal films in the infrared range

This study reports on theoretical investigations of the electric and magnetic absorption of small metallic particles as functions of their shape, with the wavelength of incident e/m radiation assumed to be much greater than the size of the particles. A general expression for the absorption cross-section is derived for the cases when both the bulk and surface electron scattering are dominant. In the IR-region the absorption cross-section is shown to be extremely sensitive to the shape of particles; for particles of a constant volume, yet different in shape, it can change by several orders of magnitude. It is also shown that under dominant surface scattering the optical conductivity of an asymmetric particle is described by a tensor whose principal values are calculated for the ellipsoidal shape. The expression obtained for the electric and magnetic absorption renders ground to infer that the ratio of the contributions due to these absorption mechanisms greatly depends on the shape of particles and polarization of light.     

椭球模型下通过雾场的多重光散射谱

由于雾滴的非球形、多重散射特性以及几何光学效应,光通过实际雾场的散射问题成为一个研究难点. 建立了近于实际的椭球雾滴模型,考虑光的衍射、透射及反射特性后,利用辐射传播方程得到了在不同的雾滴大小分布 及不同的雾滴形状分布下通过雾场的多重散射光强公式.在两种特例下与已有的结果较为相符,说明了方法的可靠性. 计算表明:与随机取向的非球形颗粒场的散射谱呈圆形特征不同,通过椭球形雾滴场的散射谱呈椭圆特征, 不同方位角的散射光强角分布有所差异,雾滴的形状因子越接近于1,差异越小;与单散射不同, 散射谱中的条纹随光学厚度增大逐步消失;对于不同大小分布及不同形状分布的雾滴场, 在不同方位角及不同观察角的散射光强随光学厚度τ的增加总是先增大再减小,光强的极大值位置在τ = 1.0---3.0 范围内.计算同时还表明,由于多数情况下实际雾场的雾滴大小偏差较大, 因而通过雾场的散射谱将呈现以中央亮斑为中心向四周弥散的图样.     

碳纳米粒子悬浮液光限幅性能数值模拟

碳纳米粒子悬浮液具有良好的光限幅性质,是一种优良的宽波段光限幅材料。通过热传导方程和米氏散射理论建立了微气泡半径与入射光能量、碳纳米粒子悬浮液散射系数和透过率的理论模型。采用Matlab数值模拟了散射系数随微气泡尺寸因子的变化关系,碳纳米粒子悬浮液光限幅性能随入射光能量的变化规律。研究了气泡尺寸因子、入射激光能量以及波长对碳纳米粒子悬浮液光限幅特性的影响。研究发现当激光能量达到一定值时,微气泡的半径保持恒定,不再随入射激光能量的增加而增加。微气泡尺寸的增大对碳纳米粒子悬浮液的透过率有着显著的影响。同时,碳纳米粒子悬浮液对不同入射光波长和光能表现出不同的光限幅性能。研究结果为实验研究提供了理论指导。     

气泡/泡沫覆盖粗糙海面电磁散射的修正双尺度法研究

提出了风驱粗糙海面覆盖水气泡层的‘体-面’复合模型.基于修正的双尺度粗糙面散射理论、MIE理论和矢量辐射传输理论,比较了水气泡与实心水粒子的电磁散射特性的差异,分析了海面泡沫覆盖率与风速、气-海温差的关系.在有、无泡沫层情形下,采用高斯和经验海谱,讨论了单站、双站散射系数与入射角、方位角、风速、风向、极化等参量的关系,并将数值计算的结果与相关文献的测量值进行了比较和分析. 关键词： 电磁散射 海面复合模型 修正双尺度法 MIE     

Study of the sensitivity of size-averaged scattering matrix elements of nonspherical particles to changes in shape, porosity and refractive index

Studies of the physical parameters that influence the single scattering properties of a size distribution of small particles in random orientation are fundamental in understanding the origin of the observed dependence of the scattering matrix elements on the scattering angle. We present results of extensive calculations of the single scattering matrices of small nonspherical particles performed by a computational model based on the Discrete-Dipole Approximation. We have particularly studied the sensitivity of the size-averaged scattering properties at visible wavelengths of nonspherical, randomly oriented absorbing particles considering changes in shape, porosity and refractive index. These studies have importance regarding the inversion of physical properties of small particles as measured in the laboratory and the dust properties in various astrophysical and atmospherical environments. We have found that size distributions of randomly oriented irregular particles of different shape, including large aspect ratio particles, show similar scattering matrix elements as a function of the scattering angle, in contrast with the pattern found for regularly shaped particles of varying axis ratios, for which the scattering matrix elements as a function of the scattering angle show much larger differences among them. Regarding porosity, we have found a very different pattern in the scattering matrix elements for an ensemble of compact and porous particles. In particular, the linear polarization for incident unpolarized light produced by compact and absorbing particles of large size parameter tend to mimic the pattern found for large absorbing spheres. For porous particles, however, the linear polarization for incident unpolarized light tends to decrease as the size of the particle grows, with the maximum being displaced towards smaller and smaller scattering angles.     

低亚表面损伤石英光学基底的加工和检测技术

制备低亚表面损伤的超光滑光学基底,是获得高损伤阈值薄膜的前提条件。针对石英材料在不同加工工序中引入亚表面损伤层的差异,首先利用共焦显微成像结合光散射的层析扫描技术,对W10和W5牌号SiC磨料研磨后的亚表面缺陷进行了检测,讨论了缺陷尺寸与散射信号强度、磨料粒径与损伤层深度间的对应关系;同时,采用化学腐蚀处理技术对抛光后样品的亚表面形貌进行了刻蚀研究,分析了化学反应生成物和亚表面缺陷对刻蚀速率的影响、不同深度下亚表面缺陷的分布特征,以及均方根粗糙度与刻蚀深度间的联系。根据各道加工工艺的不同采用了相应的亚表面检测技术,由此来确定下一道加工工序,合理的去除深度,最终获得了极低亚表面损伤的超光滑光学基底。     

双波长抗干扰光电感烟探测机理

基于T矩阵法, 选取双波长入射光, 对火灾烟颗粒与非火灾烟雾颗粒的光散射矩阵进行了详细的数值计算和比较分析. 结果表明, 入射光波长改变时, 烟颗粒光散射矩阵元素的变化明显不同于非火灾烟雾颗粒. 选用双波长脉冲激光入射, 通过检测合适的光散射矩阵元, 结合异或逻辑运算, 可区分火灾烟雾颗粒和非火灾烟雾颗粒, 降低非火灾烟雾颗粒引起的误报.     

光学元件表面缺陷的显微散射暗场成像及数字化评价系统

根据国际ISO10110-7的表面缺陷标准及惯性约束聚变(ICF)工程标准,提出了一种新颖的光学元件表面缺陷的光学显微散射成像及数字化评价系统,多束光纤冷光源呈环状分布并以一定角度斜入射到数毫米视场的被检表面,形成适合数字图像二值化处理的暗背景上的亮疵病图像。对X,Y两方向进行子孔径图像扫描成像,利用模板匹配原理对获得的子孔径图像进行拼接得到全孔径表面疵病图像信息。基于数学形态学建立了可用于大口径表面检测扫描的图像处理的模式识别软件体系,并应用二元光学制作了标准对比板,以获得疵病正确的评价依据。最终利用该变倍光学显微镜散射成像系统得到能分辨微米量级表面疵病的图像,其单个子孔径物方视场约为3 mm,对X,Y两方向进行5×5子孔径图像扫描成像,并给出了与标准比对的定量数据结果。实验结果表明,本系统完全可以实现光学元件表面缺陷的数字化评价。     

基于色散偏振度的乳化油光谱检测系统研究

以色散偏振光谱检测技术为背景,着重研究了乳化油颗粒的偏振光学特性及米散射物理模型,构建了色散偏振度光谱检测系统。在400～700nm波长范围内,分别对四种样品进行了301个波段的光谱反射率采集。结合贝塞尔函数和汉克尔函数,推导出了入射光波长与散射光偏振振幅矢量的关系,提取了一个新的特征参数：色散偏振度(DODP)。在暗室条件下,对乳化油样品ND18和ND75进行测量,利用色散偏振公式计算出了样品在各测量波长处的偏振度值,验证了基于DODP值检测乳化油的可行性。研究发现,虽然米散射的解是由单个球体的衍射推导而来,但是只要它们的直径和组成相同,且彼此之间的距离比波长大,也同样可以用于任意数量的球的衍射。在这种情况下,被不同球体散射的光之间没有相干的相位关系,总散射能量等于被一个球体散射的能量乘以它们的整数。当观测平面与入射波电矢量振动方向之间的夹角φ=0或者φ=π/2时,散射光分量E⁽(s))_θ或者E⁽(s))_φ消失。由于ND18的粒径比ND75的粒径小,所以ND18的前向散射波瓣较大,前向散射与后向散...     

随机取向气溶胶凝聚粒子光学特性研究

利用Cluster-cluster aggregation (CCA)模型,模拟了由64个球形原始微粒凝聚而成的四种随机取向气溶胶凝聚粒子。结合离散偶极子近似方法,分别得到了不同入射角和不同尺寸参数情况下气溶胶凝聚粒子的吸收、散射、消光效率因子和不对称因子的数值结果,并比较分析了四种形状气溶胶凝聚粒子吸收、散射、消光效率因子和不对称因子的差异。结果显示：对于相同数目原始微粒的气溶胶凝聚粒子,其光学特性明显依赖于入射光的入射角度和气溶胶凝聚粒子的形状;对于不同尺寸参数的气溶胶凝聚粒子,当入射光波长给定时,吸收、散射和消光效率因子最初随尺寸参数增大而快速增大,随后又随尺寸参数增大缓慢变小,但在尺寸参数变化过程中存在一个极大值;不对称因子则随尺寸参数的增大一直呈增大趋势,且随尺寸参数的增大趋近于1。     

Investigation of micropipes in 6H-SiC by Raman scattering

The spectra of 6H-SiC crystals including micropipes have been examined for the Si face using Raman scattering. The first-order Raman features reveal that the intensity of the transverse optical phonon band centered at ∼796 cm⁻¹ is sensitive to the micropipes. And the second-order Raman features of the micropipes in bulk 6H-SiC are well-defined using the selection rules for second-order scattering in wurtzite structure. It is found that there are some second-order peaks missing for the micropipe-including sample, which may be induced by the reduction of the incident laser intensity at around the micropipe, especially the uneven surface in the inner wall of the micropipe. These features might also be employed to characterize other structural defects such as screw-dislocations and threading edge dislocations.     

实际加工表面红外激光散射特性的实验研究

为了研究激光在实际加工表面的散射特性,利用分辨率为10 nW的激光功率计PM100D,波长为1550 nm的激光器和精密转台,自行设计并搭建了半球空间中目标表面散射特性的测量系统. 以典型的刨床加工的若干标准粗糙度比较样块为被测目标,在1550 nm红外激光以不同方位照射下,测量了微观具有V形槽结构的不同粗糙度的样块表面的散射功率分布. 实验结果转换成双向反射分布函数后,对比分析了入射光方位、入射角和表面粗糙度对此类典型表面散射特性的影响,并分析了特殊散射场形成的原因. 结果表明,表面纹理、入射角以及粗糙度均对目标表面的散射特性有规律性影响,这一结果对于具有规律性加工纹理表面的散射特性的研究和建模有一定的参考价值,对激光技术在实际加工表面的应用研究提供了一定的基础. 关键词： 散射特性 双向反射分布函数 红外激光 实际加工表面     

表面等离子激元非线性表面增强拉曼散射效应

本文采用热蒸发法制备得到纳米Ag颗粒作为增强拉曼衬底, 利用入射光子与纳米颗粒表面价电子的相互作用机理, 激发出高能表面等离子激元, 其表面等离子形成的高能"热点"起到表面增强拉曼散射效果. 通过比较不同入射光强下的拉曼峰强, 指出纳米Ag颗粒的增强拉曼散射效果可以实现低探测光强下的高散射强度, 即纳米Ag颗粒的表面等离子激元具有非线性的表面增强拉曼散射效果, 可降低对样品的光、热损伤, 以利于拓展拉曼散射光谱的应用范围. 同时比较不同纳米Ag颗粒衬底的表面增强拉曼散射效果表明, 采用的热蒸发工艺具有较大的工艺域度, 具有较强的工艺兼容性.     

Light scattering by large Saharan dust particles: Comparison of modeling and experimental data for two samples

Light scattering by large mineral-dust particles with small-scale surface roughness is investigated by comparing model simulations with laboratory-measured scattering matrices of two distinct dust samples collected from the Sahara desert. The samples have been chosen on the basis of their large effective radii, and the simulations are based on their measured size distributions. Size parameters larger than about 30 are modeled using a modified ray-optics model RODS (Ray optics with diffuse and specular interactions), while smaller particles are simulated with a T-matrix model. RODS allows us to mimic the surface roughness of large dust particles by covering the particle surface by a thin layer of external scatterers with specific single-scattering properties. The Gaussian-random-sphere geometry is used for the shapes of large dust particles. Small particles are modeled as an axial-ratio distribution of spheroids with smooth surfaces. One of the samples consists wholly of large particles and its scattering matrix can be reproduced very well by the RODS model, except for the phase function. The incorporation of wavelength-scale roughness is, however, necessary for good fits. The other sample, consisting of both small and large particles, proves more challenging to match with simulations. The analysis indicates, however, that the difficulties arise at least partially from the small-particle contribution, while RODS results are consistent with the measurements. Further, the results imply that the agreement with measurements would improve if roughness could also be accounted for in the small-particle simulations. Overall, the RODS method seems promising for modeling the optical properties of mineral-dust particles much larger than the wavelength.     

基片与不同方位多形态缺陷粒子的复合光散射特性分析

结合光学表面无损检测工艺实际情况,给出基片与镶嵌及掩埋的球体/回转椭球体缺陷粒子的散射特性分析。针对基片与缺陷粒子的半空间问题,结合时域有限差分方法使用广义完全匹配吸收层(GPML),结合三波技术引入激励源,给出了相应的连接边界条件,并将互易性定理应用到近远场外推中,使过程简化。数值计算给出了镶嵌及掩埋的球体/回转椭球体缺陷粒子的散射场的角分布。结果显示:镶嵌比掩埋的缺陷粒子受粒子尺寸的影响更明显。在大散射角下,缺陷粒子的位置因素带来的贡献较大。粒子分别掩埋或镶嵌于基片时,在-10°、30°、70°附近的球体粒子和回转椭球体粒子的微分散射截面(DSCS)差别较大。在基片无损检测工程中可以通过对特定角度散射场的测量定标诊断出缺陷的方位和形态。     

Effects of relativistic kinematics in heavy ion elastic scattering

Relativistic corrections to the reaction kinematic parameters were made for elastic scattering of ⁶Li, ¹²C and ⁴⁰Ar from ⁴⁰Ca, ⁹⁰Zr and ²⁰⁸Pb targets at incident energies between 20 and 100 MeV/nucleon. The results of optical model calculations show that the effects of such corrections are important when describing the angular distributions of elastic scattering cross sections for heavy ion scattering at incident energies as low as around 40 MeV/nucleon. The effects on the total reaction cross sections on the other hand, were found to be small within the energy range studied when the optical model potential is fixed.