The vacancy defects and oxygen atoms occupation effects on mechanical and electronic properties of Mo_5Si_3 silicides

Improving brittle behavior and mechanical properties is still a big challenge for high-temperature structural materials.By means of first-principles calculations,in this paper,we systematically investigate the effect of vacancy and oxygen occupation on the elastic properties and brittle-orductile behavior on Mo_5Si_3.Four vacancies (Si_(–Va1),Si_(–Va2),Mo_(–Va1),Mo_(–Va2)) and oxygen occupation models (O_(–Mo1),O_(–Mo2),O_(–Si1),O_(–Si2)) are selected for research.It is found that Mo_(–Va2)vacancy has the stronger structural stability in the ground state in comparison with other vacancies.Besides,the deformation resistance and hardness of the parent Mo_5Si_3are weakened due to the introduction of different vacancy defects and oxygen occupation.The ratio of B/G indicates that oxygen atoms occupation and vacancy defects result in brittle-to-ductile transition for Mo_5Si_3.These vacancies and the oxygen atoms occupation change the localized hybridization between Mo–Si and Mo–Mo atoms.The weaker O–Mo bond is a contributing factor for the excellent ductile behavior in the O_(-Si2)model for Mo_5Si_3.     

P213 BN: a novel large-cell boron nitride polymorph

A new boron nitride polymorph, P2₁3 BN (space group: P2₁3), is investigated by first-principles calculations, including its structural properties, stability, elastic properties, anisotropy and electronic properties. It is found that the new boron nitride polymorph P2₁3 BN is mechanically, dynamically and thermodynamically stable. The bulk modulus (B), shear modulus (G) and Young's modulus of P2₁3 BN are 91 GPa, 41 GPa and 107 GPa, respectively, all of which are larger than that of Y carbon and TY carbon. By comparing with c-BN, the Young's modulus, shear modulus and Poisson's ratio of P2₁3 BN show tiny anisotropy in the (001), (010), (100) and (111) planes. At the same time, in contrast with most boron nitride polymorphs, P2₁3 BN is a semiconductor material with a smaller band gap of 1.826 eV. The Debye temperature and the anisotropic sound velocities of P2₁3 BN are also investigated in this work.     

Shear induced phase transition in PbO under high pressure

We have studied the structural behavior of lead monoxide (PbO) as a function of pressure via angular dispersive X-ray diffraction employing two different pressure transmitting media that were quasi-hydrostatic (N₂) and non-hydrostatic (MgO), respectively. Besides litharge (-PbO) and massicot (β-PbO), which are both stable at ambient pressure, there is an orthorhombic γ-PbO phase which appears upon application of pressure to -PbO. We have found that the orthorhombic γ-PbO phase is favored by shear stress under non-hydrostatic conditions. -PbO shows strong anisotropy in compressibility. The a-axis is rather incompressible with a linear stiffness coefficient of K_a0=540(30) GPa whereas the c-axis stiffness is K_c0=25(1) GPa. The bulk modulus of -PbO is K₀=23.1(3) GPa and its derivative .     

高压下Ti_2AlX(X=C,N)的结构、力学性能及热力学性质

采用基于密度泛函理论的第一性原理方法,计算研究了压力对Ti_2AlC与Ti_2AlN结构、力学性能的影响.研究发现压力的增大会使体系的体积比降低,Ti_2AlC压缩性较Ti_2AlN好.力学性能研究发现,压力的增大使材料抵抗变形能力增强,体系的延展性有了很大的提升,当压力超过40 GPa后,Ti_2AlC与Ti_2AlN从脆性材料转变为延性材料,体模量与剪切模量的比值达到1.75,延展性有了很大的提升.通过准谐德拜模型,分析了压力与温度对Ti_2AlC与Ti_2AlN体模量、热容及热膨胀系数的影响.结果表明,随着温度的升高,Ti_2AlN与Ti_2AlC的体模量下降.定容热容与定压热容的变化趋势相同,但在高温下,定容热容遵循Dulong-Petit极限,温度对热容的影响效果较压力明显.温度与压力对Ti_2AlN与Ti_2AlC线膨胀系数的影响主要发生在低温区域.     

Anomalous behavior and phase transformation of α-GaOOH nanocrystals under static compression

The structural compression mechanism and compressibility of gallium oxyhydroxide, α-GaOOH, are investigated by in situ synchrotron radiation x-ray diffraction at pressures up to 31.0 GPa by using the diamond anvil cell technique. Theα-GaOOH sustains its orthorhombic structure when the pressure is lower than 23.8 GPa. The compression is anisotropic under hydrostatic conditions, with the a-axis being most compressible. The compression proceeds mainly by shrinkage of the void channels formed by the coordination GaO_3(OH)_3 octahedra of the crystal structure. Anomaly is found in the compression behavior to occur at 14.6GPa, which is concomitant with the equatorial distortion of the GaO_3(OH)_3 octahedra. A kink occurs at 14.6 GPa in the plot of finite strain f versus normalized stress F, indicating the change in the bulk compression behavior. The fittings of a second order Birch–Murnaghan equation of state to the P–V data in different pressure ranges result in the bulk moduli B_0= 199(1) GPa for P 14.6 GPa and B_0= 167(2) GPa for P 14.6 GPa. As the pressure is increased to about 25.8 GPa, a first-order phase transformation takes place, which is evidenced by the abrupt decrease in the unit cell volume and b and c lattice parameters.     

Elastic properties of CaCO_3 high pressure phases from first principles

Elastic properties of three high pressure polymorphs of CaCO_3 are investigated based on first principles calculations.The calculations are conducted at 0 GPa–40 GPa for aragonite, 40 GPa–65 GPa for post-aragonite, and 65 GPa–150 GPa for the P2_1/c-h-CaCO_3 structure, respectively. By fitting the third-order Birch–Murnaghan equation of state(EOS), the values of bulk modulus K_0 and pressure derivative K~'_0 are 66.09 GPa and 4.64 for aragonite, 81.93 GPa and 4.49 for post-aragonite, and 56.55 GPa and 5.40 for P2_1/c-h-CaCO_3, respectively, which are in good agreement with previous experimental and theoretical data. Elastic constants, wave velocities, and wave velocity anisotropies of the three highpressure CaCO_3 phases are obtained. Post-aragonite exhibits 25.90%–32.10% V_P anisotropy and 74.34%–104.30% V_S splitting anisotropy, and P2_1/c-h-CaCO_3 shows 22.30%–25.40% V_Panisotropy and 42.81%–48.00% V_S splitting anisotropy in the calculated pressure range. Compared with major minerals of the lower mantle, CaCO_3 high pressure polymorphs have low isotropic wave velocity and high wave velocity anisotropies. These results are important for understanding the deep carbon cycle and seismic wave velocity structure in the lower mantle.     

NbSi2奇异高压相及其热力学性质的第一性原理研究

采用基于粒子群优化算法的结构预测程序CALYPSO, 并结合第一性原理的VASP程序, 在175 GPa发现NbSi₂的奇异立方高压相. 在此结构中, Nb原子形成金刚石结构, 而Si原子则形成正四面体镶嵌在金刚石结构中. 声子谱计算结果表明该结构是动力学稳定的. 电子结构分析表明, 六角相和立方相NbSi₂均为金属, 对金属性贡献较大的是Nb原子, 而且Nb和Si原子之间存在明显的p-d杂化现象, 电荷更多地聚集在Si四面体中. 利用“应力应变”方法, 计算了NbSi₂的弹性常数, 分析了其体积模量、剪切模量、杨氏模量和德拜温度等热动力学性质随压力的变化并进行了详细的讨论. 根据剪切模量和体积模量的比值分析了NbSi₂两种相结构的脆性和延展性, 发现压力会导致六角相NbSi₂的延展性增加, 但对立方相结构的延展性影响较小; 采用经验算法计算了NbSi₂两种相结构硬度变化情况, 结合这一比值进行了详细的分析. 弹性各向异性计算结果表明, 随着压力增加, 六角结构的各向异性增强, 而立方结构的各向异性减小.     

IrB和IrB$lt;sub$gt;2$lt;/sub$gt;力学性质的第一性原理计算

采用平面波赝势密度泛函理论对0–100 GPa静水压下P₁ -IrB（空间群Pnma）和P₅ -IrB₂（空间群Pmmn）结构的平衡态晶格常数、弹性常数等性质进行了研究. 研究结果表明,P₁ -IrB不可压缩性随着压强的增加而增强;P₅ -IrB₂ 结构在0–100 GPa范围内弹性常数、体弹模量、剪切模量均呈现出有规律的变化,当所加压强为50 GPa时,杨氏模量和在b方向的晶格常数发生异常变化. 对零压下P₁ -IrB和P₅ -IrB₂ 的电子结构的研究发现,二者均没有一个明显的带隙,主要原因为Ir原子和B原子间的共价作用. 从P₁ -IrB和P₅ -IrB₂的能带结构和态密度图可以发现这两种结构均有金属性. 关键词： 1 -IrB')" href="#">P₁ -IrB 5-IrB₂')" href="#">P₅-IrB₂ 第一性原理 力学性质     

InOOH压致氢键对称化及其弹性性质

利用第一性原理研究了InOOH在高压下的氢键对称化行为及其对InOOH弹性等性质的影响.结果表明约在18 GPa时InOOH中的氢键发生了对称化转变,导致轴比率b/c对压力的斜率由负值变为正值;压缩弹性常数、非对角弹性常数、体积模量和纵波波速出现异常增加,如体积模量增加了20%—40%.高压下InOOH弹性性质呈现出更加明显的各向异性.常压下InOOH呈现韧性,且伴随着氢键对称化韧性异常增加.对畸变金红石型MOOH(M=Al,In,Ga,Fe,Cr)化合物在高压下的弹性性质转变与氢键性质转变的耦合规律进行了初探.     

新型石墨插层化合物HfC2结构与性质的第一性原理研究

在高压下,预测一种新型石墨插层化合物HfC₂.采用第一性原理方法对其在0 GPa下的结构和性质进行研究,分别采用GGA-PBESOL、GGA-PW91和LDA方法进行结构优化,得到的晶体学数据基本相同.弹性常数和声子谱计算证实其力学和晶格动力学稳定性,表明HfC₂在0 GPa下能够稳定存在.采用GGA-PBESOL方法计算得到HfC₂的体模量和剪切模量达到265 GPa和118 GPa,Pugh比k<0.57,是一种具有高体模量的韧性材料.HfC₂存在C-C、Hf-C共价作用,且具有金属特性和特殊层状结构,是其具有高体模量和韧性的原因.最后,对HfC₂在0~500 GPa内的键长、体模量、剪切模量、k值等进行研究,探索其力学性质随压力变化的规律.     

Behaviors of Zn_2GeO_4 under high pressure and high temperature

The structural stability of Zn_2GeO_4 was investigated by in-situ synchrotron radiation angle dispersive x-ray diffraction. The pressure-induced amorphization is observed up to 10 GPa at room temperature. The high-pressure and hightemperature sintering experiments and the Raman spectrum measurement firstly were performed to suggest that the amorphization is caused by insufficient thermal energy and tilting Zn–O–Ge and Ge–O–Ge bond angles with increasing pressure,respectively. The calculated bulk modulus of Zn_2GeO_4 is 117.8 GPa from the pressure-volume data. In general, insights into the mechanical behavior and structure evolution of Zn_2GeO_4 will shed light on the micro-mechanism of the materials variation under high pressure and high temperature.     

Na2TiGeO5: Crystal structure stability at low temperature and high pressure

The temperature evolution of the lattice parameters measured from 295 to 125 K exhibits a small instability below T_c≈278 K, indicating ferroelastic properties of Na₂TiGeO₅. The behavior is related to the specific crystal structure built of polyhedral layers with shared TiO₅ pyramids and GeO₄ tetrahedra, alternating with layers of Na⁺ cations. Antiparallel alignment of the short apical titanyl bond in adjacent rows of the polyhedral layer gives rise to spontaneous strain, when a distortion of the TiO₅ groups occurs. Single-crystal structures determined at room temperature and 120 K suggest that {1 1 0} domains, developing below T_c, entail a tetragonal-to-orthorhombic symmetry change. The mechanism is attributed to a shortening of the O–O distance between the polyhedral layers, and to minor shifts of the positions of the Ti atoms and the correlated oxygen atoms along the c-axis. The structure distortion, however, is too small to allow any unambiguous determination of the symmetry-breaking effects. The bulk modulus and its pressure derivative have been determined as B₀=89(2) GPa and . A pressure-induced phase transformation takes place at P_c≈12.5 GPa, presumably to an orthorhombic structure. The pressure effect on the transition temperature is given by ΔT_c/ΔP≈1.76 K/GPa.     

ZrV2结构、弹性和热力学性质的第一性原理计算

采用基于密度泛函理论的第一性原理平面波赝势方法研究ZrV₂的晶体结构和弹性,利用准谐Debye模型计算在不同温度(T=0~1200 K)和不同压强(P=0~20 GPa)下ZrV₂的热力学性质,包括弹性模量与压强,热熔与温度,以及热膨胀系数与温度和压力的关系.结果表明:计算的ZrV₂晶格常数与实验值符合较好,晶体材料的弹性常数随着压力增加而增加;在一定温度下,相对体积、热熔随着压强的增加而减小,德拜温度、弹性模量随着压强的增加而增加,且高压下温度对ZrV₂热膨胀系数的影响小于压强的影响.     

Hf-C体系的高压结构预测及电子性质第一性原理模拟

本论文中, 采用晶体结构预测软件USPEX结合第一性原理方法全面地搜索了Hf-C体系在高压下的晶体结构, 预测得到了两种新的化合物及HfC在高压下的相变路径. 压力低于100 GPa 时, 除了常压下的结构HfC, Hf₃C₂, Hf₆C₅, 并没有得到新的热力学稳定结构. 在200 GPa时, 预测得到了一种新化合物——Hf₂C, 空间群为I4/m; 且HfC的结构发生了相变, 空间群由Fm3m变为C2/m. 在300 GPa时, 预测得到了另一种新化合物——HfC₂, 空间群为Immm. 而在400 GPa时, HfC的结构再次发生相变, 空间群为Pnma. 通过能量计算, 得到了Hf-C体系的组分-压力相图: 在压力分别低于15.5 GPa和37.7 GPa时, Hf₃C₂和Hf₆C₅是稳定的; 压力分别大于102.5 GPa和215.5 GPa时, Hf₂C和HfC₂变成稳定化合物; HfC的相变路径为Fm3m→C2/m→Pnma, 相变压力分别为185.5 GPa 和322 GPa. 经结构优化后, 得到了这四种高压新结构的晶体学数据, 如晶格常数、原子位置等, 并分析了其结构特点. 对于Hf-C 体系中的高压热力学稳定结构, 分别计算了其弹性性质和声子谱曲线, 证明是力学稳定和晶格动力学稳定的. 采用第一性原理软件VASP模拟高压结构的能带结构、态密度、电子局域函数和Bader 电荷分析, 发现HfC(C2/m, Pnma结构), Hf₂C 和HfC₂ 中Hf-C 键具有强共价性、弱金属性和离子性, 且C-C 间存在共价作用.     

Comparative study of Mo_2Ga_2C with superconducting MAX phase Mo_2GaC: First-principles calculations

The structural, electronic, optical and thermodynamic properties of Mo_2Ga_2C are investigated using density functional theory(DFT) within the generalized gradient approximation(GGA). The optimized crystal structure is obtained and the lattice parameters are compared with available experimental data. The electronic density of states(DOS) is calculated and analyzed. The metallic behavior for the compound is confirmed and the value of DOS at Fermi level is 4.2 states per unit cell per e V. Technologically important optical parameters(e.g., dielectric function, refractive index, absorption coefficient, photo conductivity, reflectivity, and loss function) are calculated for the first time. The study of dielectric constant(ε1) indicates the Drude-like behavior. The absorption and conductivity spectra suggest that the compound is metallic.The reflectance spectrum shows that this compound has the potential to be used as a solar reflector. The thermodynamic properties such as the temperature and pressure dependent bulk modulus, Debye temperature, specific heats, and thermal expansion coefficient of Mo_2Ga_2C MAX phase are derived from the quasi-harmonic Debye model with phononic effect also for the first time. Analysis of T c expression using available parameter values(DOS, Debye temperature, atomic mass,etc.) suggests that the compound is less likely to be superconductor.     

Neutron diffraction study of magnetic ordering in ErMn2Si2, ErMn2Ge2 and ErFe2Si2

Neutron diffraction study of polycrystalline compounds ErMn₂Si₂, ErMn₂Ge₂ and ErFe₂Si₂ was performed in the temperature range between 1.8 and 293 K. All compounds have tetragonal, ThCr₂Si₂-type crystal structure. The antiferromagnetic collinear structure of ErMn₂Si₂ and ErMn₂Ge₂ at both RT and LNT, consists of a sequence + - + - of ferromagnetic layers of Mn atoms. The magnetic moment of an Mn atom (≈2μ_B) is parallel to the c-axist. At low temperatures (LHT and lower), the ferromagnetic ordering within the Er sublattice is observed. The magnetic moment (μ_Er ≈ 9μ_B) is perpendicular to the c-axis. From the temperature dependence of the intensities of the magnetic peaks, the following values for the Curie temperatures were obtained: (10±5) K for ErMn₂Si₂ and (8.5±3) K for ErMn₂Ge₂. For ErFe₂Si₂ a collinear antiferromagnetic structure of the + - - + type was found, the magnetic unit cell consisting of the chemical one, doubled along the c-axis.     

Hf-N体系的晶体结构预测和性质的第一性原理研究

为了寻找具有优异力学性能的新型超高温陶瓷材料, 结合进化算法和第一性原理, 系统研究了Hf-N二元体系所有稳定存在的化合物及其晶体结构. 除了实验已知的岩盐结构的HfN之外, 本文还找到了Hf₆N(R-3), Hf₃N(P6₃22), Hf₃N₂(R-3m), Hf₅N₆(C2/m)和Hf₃N₄(C2/m)五种新结构, 基于准简谐近似原理计算了这些稳定结构的声子谱以验证其动力学稳定性, 常温甚至更高温度下的吉布斯自由能以验证其高温热力学稳定性. 结果表明, 这些结构是动力学稳定的, 且在1500 K以下都是热力学稳定的. 同时, 本文还列出了在搜索过程中出现的空间对称性较高、能量较低的亚稳态结构, 包括Hf₂N(P4₂/mnm), Hf₄N₃(C2/m), Hf₆N₅(C2/m), Hf₄N₅(I4/m), Hf₃N₄(I-43d)和Hf₃N₄(Pnma). 之后计算了上述所有结构的力学性质(弹性常数、体模量、 剪切模量、 杨氏模量、硬度), 随着N 所占比例的增加, 硬度呈现的整体趋势是先增大后下降, 在Hf₅N₆处取得最大值, 为21 GPa. 其中Hf₃N₂和Hf₄N₅也展现出了较高的硬度, 都为19 GPa. 最后, 计算了这些结构的电子态密度和晶体轨道汉密尔顿分布, 从电子结构的角度分析了力学性能的成因. 研究结果显示, 较强的Hf-N共价键和较低的结构空位率是Hf₅N₆具有优异力学性能的主要原因.     

MoSi2薄膜电子性质的第一性原理研究

采用第一性原理计算方法, 研究了四方MoSi₂薄膜的电子性质. 计算结果表明, 各种厚度的薄膜都是金属性的, 并且随着厚度的增加, 其态密度与能带结构都逐渐趋近于MoSi₂块体的特性. 通过对MoSi₂薄膜磁性的分析, 发现三个原子层厚的薄膜具有磁性, 其原胞净磁矩为0.33 μ_B; 而当薄膜的厚度大于三个原子层时, 薄膜不具有磁性. 此外, 进一步对单侧加氢饱和以及双侧加氢饱和结构下三原子层MoSi₂薄膜的电子性质进行了研究, 发现单侧加氢饱和的三原子层MoSi₂薄膜具有磁性, 其原胞净磁矩为0.26 μ_B, 而双侧加氢饱和三原子层MoSi₂薄膜是非磁性的. 双侧未饱和与单侧加氢饱和的三原子层MoSi₂薄膜的自旋极化率分别为30%和33%. 这些研究结果表明, 三原子层厚的MoSi₂ 超薄薄膜在悬空或者生长于基底之上时具有金属磁性, 预示着它在纳米电子学和自旋电子学器件等方面都有潜在的应用前景.     

Itinerant f-electron systems of cerium and uranium compounds

The f-electron systems of the cerium and uranium compounds have attracted attention in the context of heavy fermion and anisotropic superconductivity. We clarified an itinerant f-electron nature for UPt₃ by the de Haas–van Alphen experiments, detecting heavy conduction electrons with 100m₀. The dHvA oscillation was also observed clearly in both the normal and superconducting mixed states in CeRu₂,URu₂Si₂ and UPd₂Al₃. An anisotropic energy gap with a line node for URu₂Si₂ was discussed from the angular dependence of the dHvA amplitude in the mixed state.     

Mechanical,elastic, anisotropy,and electronic properties of monoclinic phase of m-Si_xGe_(3-x)N_4

The structural,mechanical,elastic anisotropic,and electronic properties of the monoclinic phase of m-Si_3N_4,mSi_2GeN_4,m-SiGe_2N_4,and m-Ge_3N_4are systematically investigated in this work.The calculated results of lattice parameters,elastic constants and elastic moduli of m-Si_3N_4and m-Ge_3N_4are in good agreement with previous theoretical results.Using the Voigt–Reuss–Hill method,elastic properties such as bulk modulus B and shear modulus G are investigated.The calculated ratio of B/G and Poisson’s ratio v show that only m-SiGe_2N_4should belong to a ductile material in nature.In addition,m-SiGe_2N_4possesses the largest anisotropic shear modulus,Young’s modulus,Poisson’s ratio,and percentage of elastic anisotropies for bulk modulus ABand shear modulus AG,and universal anisotropic index AUamong m-Si_xGe_(3-x)N_4(x=0,1,2,3.)The results of electronic band gap reveal that m-Si_3N_4,m-Si_2GeN_4,m-SiGe_2N_4,and m-Ge_3N_4 are all direct and wide band gap semiconducting materials.