Tunable electronic properties of GaS-SnS2 heterostructure by strain and electric field

Vertically stacked heterostructures have received extensive attention because of their tunable electronic structures and outstanding optical properties. In this work, we study the structural, electronic, and optical properties of vertically stacked GaS-SnS₂ heterostructure under the frame of density functional theory. We find that the stacked GaS-SnS₂ heterostructure is a semiconductor with a suitable indirect band gap of 1.82 eV, exhibiting a type-II band alignment for easily separating the photo-generated carriers. The electronic properties of GaS-SnS₂ heterostructure can be effectively tuned by an external strain and electric field. The optical absorption of GaS-SnS₂ heterostructure is more enhanced than those of the GaS monolayer and SnS₂ monolayer in the visible light region. Our results suggest that the GaS-SnS₂ heterostructure is a promising candidate for the photocatalyst and photoelectronic devices in the visible light region.     

First principle investigation of the electronic and thermoelectric properties of Mg_2C

In this paper, electronic and thermoelectric properties of Mg_2C are investigated by using first principle pseudo potential method based on density functional theory and Boltzmann transport equations. We calculate the lattice parameters,bulk modulus, band gap and thermoelectric properties(Seebeck coefficient, electrical conductivity, and thermal conductivity) of this material at different temperatures and compare them with available experimental and other theoretical data. The calculations show that Mg_2C is indirect band semiconductor with a band gap of 0.75 eV. The negative value of Seebeck coefficient shows that the conduction is due to electrons. The electrical conductivity decreases with temperature and Power factor(PF) increases with temperature. The thermoelectric properties of Mg_2C have been calculated in a temperature range of 100 K–1200 K.     

点缺陷对单层MoS2电子结构及光学性质的影响研究

采用基于第一性原理的贋势平面波方法,对不同类型点缺陷单层MoS2电子结构、能带结构、态密度和光学性质进行计算。计算结果表明：单层MoS2属于直接带隙半导体,禁带宽度为1.749ev,V-Mo缺陷的存在使得MoS2转化为间接带隙Eg=0.671eV的p型半导体,V-S缺陷MoS2的带隙变窄为Eg=0.974eV,S-Mo缺陷的存在使得MoS2转化为间接带隙Eg=0.482eV; Mo-S缺陷形成Eg=0.969eV直接带隙半导体,费米能级上移靠近价带。 费米能级附近的电子态密度主要由Mo的4d态和s的3p态电子贡献。光学性质计算表明：空位缺陷对MoS2的光学性质影响最为显著,可以增大MoS2的静态介电常数、折射率n0和反射率,降低吸收系数和能量损失。     

黑索金电子结构和光学性质的第一性原理研究

利用基于密度泛函理论的第一性原理方法对黑索金晶体的电子结构和光学性质进行了计算. 结果表明: 黑索金是能隙值为3.43 eV的绝缘体, 价带主要由C, N和O的2s与2p态构成, 而导带主要由N-2p和O-2p态构成; 静态介电函数ε₁(0)=1.38, 介电常数的虚部有5个峰值, 其中最大峰值在光子能量4.59 eV处, 并对造成这些峰值的可能的电子跃迁做了详细分析. 利用能带结构和态密度分析了黑索金的光反射系数、吸收系数及能量损失函数等光学性质, 发现黑索金是对光吸收、反射及能量损失不敏感的材料. 关键词： 黑索金 第一性原理 电子结构 光学性质     

(Cu,N)共掺杂TiO2/MoS2异质结的电子和光学性能:杂化泛函HSE06

在密度泛函理论的基础上,系统地研究了Cu/N（共）掺杂的TiO₂/MoS₂异质结体系的几何结构、电子结构和光学性质.计算发现,TiO₂/MoS₂异质结的带隙相比于纯的TiO₂（101）表面明显变小,Cu/N（共）掺杂TiO₂/MoS₂异质结体系的禁带宽度也明显地减小,这导致光子激发能量的降低和光吸收能力的提高.通过计算Cu/N（共）掺杂TiO₂/MoS₂的差分电荷密度,发现光生电子与空穴积累在掺杂后的TiO₂（101）表面和单层MoS₂之间,这表明掺杂杂质体系可以有效地抑制光生电子-空穴对的复合.此外,我们计算了在不同压力下TiO₂/MoS₂异质结的几何、电子和光学性质,发现适当增加压力可以有效提高异质结的光吸收性能.本文结果表明,Cu/N（共）掺杂TiO₂/MoS₂异质结和对TiO₂/MoS₂异质结加压都能有效地提高材料的光学性能.     

Alkali-metal(Li,Na, and K)-adsorbed MoSi2N4 monolayer: an investigation of its outstanding electronic,optical, and photocatalytic properties

Single-layer MoSi₂N₄,a high-quality two-dimensional material,has recently been fabricated by chemical vapor deposition.Motivated by this latest experimental work,herein,we apply first principles calculations to investigate the electronic,optical,and photocatalytic properties of alkali-metal(Li,Na,and K)-adsorbed MoSi₂N₄ monolayer.The electronic structure analysis shows that pristine MoSi₂N₄ monolayer exhibits an indirect bandgap(E_g=1.89 eV).By contrast,the bandgaps of one Li-,Na-,and K-adsorbed MoSi₂N₄ monolayer are 1.73 eV,1.61 eV,and 1.75 eV,respectively.Moreover,the work function of MoSi₂N₄ monolayer(4.80 eV)is significantly reduced after the adsorption of alkali metal atoms.The work functions of one Li-,Na-,and K-adsorbed MoSi₂N₄ monolayer are 1.50 eV,1.43 eV,and 2.03 eV,respectively.Then,optical investigations indicate that alkali metal adsorption processes substantially increase the visible light absorption range and coefficient of MoSi₂N₄ monolayer.Furthermore,based on redox potential variations after alkali metals are adsorbed,Li-and Na-adsorbed MoSi₂N₄ monolayers are more suitable for the water splitting photocatalytic process,and the Li-adsorbed case shows the highest potential application for CO₂ reduction.In conclusion,alkali-metal-adsorbed MoSi₂N₄ monolayer exhibits promising applications as novel optoelectronic devices and photocatalytic materials due to its unique physical and chemical properties.     

畸形钙钛矿DyMnO3电子结构与光学性质的第一性原理研究

基于密度泛函理论的广义梯度近似对畸形钙钛矿DyMnO₃的基态电子结构及光学性质进行计算和分析.结果表明优化的晶体结构参数与实验结果相符合,DyMnO₃具有非间接带隙大小为0.91 eV的能带结构,结合态密度分析了各元素价电子态的分布.计算分析包括介电常数,吸收系数,反射率等光学性质.     

第一性原理研究Mn和Cu掺杂六钛酸钾(K_2Ti_6O_(13))的电子结构和光学性质

六钛酸钾(K_2Ti_6O_(13))是宽带隙半导体光催化材料,只能响应波长较短的紫外光.为了使K_2Ti_6O_(13)对可见光响应,本文采用第一性原理方法,研究过渡金属Mn和Cu掺杂改性后K_2Ti_6O_(13)的电子结构和光学性质.计算结果表明:Mn,Cu掺杂后K_2Ti_6O_(13)禁带中出现了杂质能级,这些杂质能级由O 2p和Ti 3d与Mn 3d或Cu 3d态杂化而成.对于Mn掺杂的K_2Ti_6O_(13),其带隙值变小,位于能带中间的杂质能级可作为电子跃迁的桥梁,从而实现了对可见光的吸收.对于Cu掺杂的K_2Ti_6O_(13),其带隙值虽略有增大,但是若考虑将与价带相连的杂质能级,带隙值将大大减小,且此杂质能级可抑制光生载流子的复合,使得掺杂后K_2Ti_6O_(13)吸收带边红移至可见光区并在可见光范围内吸收强度明显增强.总的而言,Mn,Cu的掺杂实现了钛酸钾对可见光的吸收,同时Cu掺杂的效果要优于Mn掺杂的效果.研究结果对K_2Ti_6O_(13)在光催化领域上的应用具有重要的意义.     

Electronic structures and topological properties of TeSe2 monolayers

The successfully experimental fabrication of two-dimensional Te monolayer films [Phys. Rev. Lett. 119 106101 (2017)] has promoted the researches on the group-VI monolayer materials. In this work, the electronic structures and topological properties of a group-VI binary compound of TeSe₂ monolayers are studied based on the density functional theory and Wannier function method. Three types of structures, namely, α-TeSe₂, β-TeSe₂, and γ-TeSe₂, are proposed for the TeSe₂ monolayer among which the α-TeSe₂ is found being the most stable. All the three structures are semiconductors with indirect band gaps. Very interestingly, the γ-TeSe₂ monolayer becomes a quantum spin Hall (QSH) insulator with a global nontrivial energy gap of 0.14 eV when a 3.5% compressive strain is applied. The opening of the global band gap is understood by the competition between the decrease of the local band dispersion and the weakening of the interactions between the Se p_x, p_y orbitals and Te p_x, p_y orbitals during the process. Our work realizes topological states in the group-VI monolayers and promotes the potential applications of the materials in spintronics and quantum computations.     

Monolayered semiconducting GeAsSe and SnSbTe with ultrahigh hole mobility

High carrier mobility and a direct semiconducting band gap are two key properties of materials for electronic device applications. Using first-principles calculations, we predict two types of two-dimensional semiconductors, ultrathin GeAsSe and SnSbTe nanosheets, with desirable electronic and optical properties. Both GeAsSe and SnSbTe sheets are energetically favorable, with formation energies of −0.19 and −0.09 eV/atom, respectively, and have excellent dynamical and thermal stability, as determined by phonon dispersion calculations and Born–Oppenheimer molecular dynamics simulations. The relatively weak interlayer binding energies suggest that these monolayer sheets can be easily exfoliated from the bulk crystals. Importantly, monolayer GeAsSe and SnSbTe possess direct band gaps (2.56 and 1.96 eV, respectively) and superior hole mobility (~20 000 cm²·V⁻¹·s⁻¹), and both exhibit notable absorption in the visible region. A comparison of the band edge positions with the redox potentials of water reveals that layered GeAsSe and SnSbTe are potential photocatalysts for water splitting. These exceptional properties make layered GeAsSe and SnSbTe promising candidates for use in future high-speed electronic and optoelectronic devices.     

卤化硅烯结构、电子和光学性质的第一性原理研究

二维硅烯的商业用途通常受到其零带隙的抑制,限制了其在纳米电子和光电器件中的应用.利用基于密度泛函理论的第一性原理计算,单层硅烯的带隙通过卤原子的化学官能化被成功打开了,并综合分析了卤化对单层硅烯的结构,电子和光学性质的影响.研究结果表明卤化使结构变得扭曲,但保持了良好的稳定性.通过HSE06泛函,全功能化赋予硅烯1.390至2.123 eV的直接带隙.键合机理分析表明,卤原子与主体硅原子之间的键合主要是离子键.最后,光学性质计算表明,I-Si-I单层在光子频率为10.9 eV时达到最大光吸收,吸收值为122000 cm^-1,使其成为设计新型纳米电子和光电器件的有希望的候选材料.     

Electronic Properties of Fullerenes for Two Kinds of Hybridized Orbits

The electronic hopping energies and the band structure of a neutral C₆₀ molecule for two kinds of hybridized orbits, sp³ and sp², are studied using the Wannier function method and tight-binding approximation model, respectively. By comparison, the sp³ hybridized type is superior in the band structure obtained by employing the Wannier function method. When the effective nuclear charge number Z = 1.148 the energy gap (t_lu-h_u), bandwidth (t_3g-a_g) and threshold value (t_3g-h_u) of the ionization energy are 1.70 eV, 11.35 eV and 7.69 eV, respectively. These results are in accord with the experimental values.     

Comparative study of structural,electronic, optical and thermoelectric properties of GaS bulk and monolayer

The structural, electronic, optical properties of GaS in bulk and monolayer forms have been studied by means of full-potential linearised augmented plane wave calculations within framework of the density functional theory. Generalised gradient approximation and Tran–Blaha modified Becke–Johnson exchange potential (mBJ) were employed for the treatment of exchange-correlation effect in calculations. Our calculated lattice parameters are in good agreement with previous theoretical results and available experimental data. The negative formation enthalpy and cohesive energy indicate that both bulk and monolayer GaS can be synthesised and stabilised experimentally. Our electronic results show that the band gap of GaS monolayer is higher than that of bulk counterpart and strong hybridisation between electronic states of constituent atoms is observed in both cases. The optical properties such as reflectivity, absorption coefficient, refractive index and optical conductivity were derived from calculated complex dielectric function for wide energy range up to 35?eV. Finally, the thermoelectric properties of GaS bulk and monolayer also were calculated using semi-classical Boltzmann theory within the constant relaxation time approximation for investigating their applicability in thermoelectric devices.     

二硫化钼/石墨烯异质结的界面结合作用及其对带边电位影响的理论研究

采用基于色散修正的平面波超软赝势方法研究了二硫化钼/石墨烯异质结的界面结合作用及其对电荷分布和带边电位的影响.研究表明二硫化钼与石墨烯之间可以形成范德瓦耳斯力结合的稳定堆叠结构.通过能带结构计算,发现二硫化钼与石墨烯的耦合导致二硫化钼成为n型半导体,石墨烯转变成小带隙的p型体系.并通过电子密度差分图证实了界面内二硫化钼附近聚集负电荷,石墨烯附近聚集正电荷,界面内形成的内建电场可以抑制光生电子-空穴对的复合.石墨烯的引入可以调制二硫化钼的能带,使其导带底上移至-0.31 eV,提高了光生电子还原能力,有利于光催化还原反应.     

PbWO4闪烁晶体的发光动力学模型

在对PbWO₄闪烁晶体的光谱特性、发光衰减及其温度依赖以及热释光的研究基础上,并结合理论计算,提出了PbWO₄晶体发光的动力学模型,给出了PbWO₄晶体的基本能带结构及激子发光中心能态、陷阱能级在能隙中的位置。用此模型可以完整说明PbWO₄的发光过程,特别是导致室温下发光效率低的原因。最后还对其主发射成分蓝、绿发光中心的起源作了简要讨论。     

Electronic and optical properties of single-layer MoS<Subscript>2</Subscript>

The electronic structures of a MoS₂ monolayer are investigated with the all-electron first principle calculations based on the density functional theory (DFT) and the spin-orbital couplings (SOCs). Our results show that the monolayer MoS₂ is a direct band gap semiconductor with a band gap of 1.8 eV. The SOCs and d-electrons in Mo play a very significant role in deciding its electronic and optical properties. Moreover, electronic elementary excitations are studied theoretically within the diagrammatic self-consistent field theory. Under random phase approximation, it shows that two branches of plasmon modes can be achieved via the conduction-band transitions due to the SOCs, which are different from the plasmons in a two-dimensional electron gas and graphene owing to the quasi-linear energy dispersion in single-layer MoS₂. Moreover, the strong optical absorption up to 10⁵ cm^-1 and two optical absorption edges I and II can be observed. This study is relevant to the applications of monolayer MoS₂ as an advanced photoelectronic device.     

不同价态稀土元素Yb掺杂ZnO的电子结构和光学性质

基于密度泛函理论, 采用第一性原理平面波超软赝势法, 对六方纤锌矿结构的ZnO晶体和Yb²⁺, Yb³⁺分别掺杂ZnO晶体进行几何优化, 并在此基础上计算得到了未掺杂ZnO晶体及不同价态Yb元素掺杂ZnO体系的空间结构、 能带、电子态密度及光学性质.结果表明: 掺杂后体系形成能减少, 稳定性增加, 并引入了Yb-4f杂质能级. 掺杂不同价态的Yb元素对能带结构产生了不同的影响, 并且都使体系的光学性质发生了明显变化.与纯ZnO相比, Yb²⁺, Yb³⁺ 分别掺杂ZnO体系的介电函数虚部在0.46 eV处均出现新峰, 静态介电函数明显增大, 吸收带边均红移, 并在0.91 eV处出现较强吸收峰, 对产生这一现象的原因给出了定性的讨论. 关键词： 掺杂 ZnO 不同价态 第一性原理     

直接带隙半导体In2(PS3)3单层结构与电子特性的第一性原理研究

高载流子迁移率和可调直接带隙是低维电子器件应用的两个关键特性.但目前发现的此类二维材料稀少.鉴于此在第一性原理计算的基础上,本文系统研究了In₂(PS₃)₃单层的稳定性、电子结构性质和机械性质.研究结果表明,In₂(PS₃)₃单层是具有直接带隙的半导体材料(1.58 eV).在-3%到3%应变下,In₂(PS₃)₃单层的带隙是可以调节的(1.3～1.8 eV).声子谱、分子动力学和弹性常数的计算结果表明,In₂(PS₃)₃单层是热力学、动力学和机械稳定的.此外,In₂(PS₃)₃单层的剥离能(0.21 J m^-2)小于石墨烯的剥离能(0.36 J m^-2),有望像石墨烯一样机械剥离得到.这些优异的的性能使得In     

Elastic,vibrational, and thermodynamic properties of Sr_(10)(PO_4)_6F_2 and Ca_(10)(PO_4)_6F_2 from first principles

The electronic, elastic, vibrational, and thermodynamic properties of Sr_(10)(PO_4)_6F_2(Sr-FAP) and Ca_(10)(PO_4)_6F_2(CaFAP) are systematically investigated by the first-principles calculations. The calculated electronic band structure indicates that the Sr-FAP and Ca-FAP are insulator materials with the indirect band gap of 5.273 eV and 5.592 eV, respectively. The elastic constants are obtained by the "stress–strain" method, and elastic modulus are further evaluated and discussed. The vibrational properties, including the phonon dispersion curves, the phonon density of states, the Born effective charge, and associated longitudinal optical and transverse optical(LO–TO) splitting of optical modes, as well as the phonon frequencies at zone-center are obtained within the linear-response approach. Substitution of Ca by Sr causes phonon frequencies to shift to lower values as expected due to the mass effect. Additionally, some phonon-related thermodynamic properties, such as Helmholtz free energy F, internal energy E, entropy S, and specific heat C_V of Sr-FAP and Ca-FAP are predicted with the harmonic approximation. The present calculated results of two apatites are consistent with the reported experimental and theoretical results.     

First principles study on geometric and electronic properties of two-dimensional Nb2CTx MXenes

MXenes are a new type of two-dimensional carbides with rich physical and chemical properties. The physics of MXenes, and thus the applications, are dominated by surface functional groups. Herein, the effects of different terminations (O, S, Se, Te) on the geometric and electronic properties of Nb₂C MXenes were studied via density functional theory (DFT) calculations. Three adsorption sites were examined to determine the most stable configurations. The results showed that both the types and the positions of surface functional groups influence the geometric stability and physical characters of Nb₂C. The S and Se terminations make the Nb₂C MXenes to be semiconductor, while Nb₂C MXenes with other terminations (O, Te) are conductor. The electron location function, density of states, Bader charge distribution, and the projected crystal orbital Hamilton population were conducted to explain the origin of adsorption stability and electronic nature difference. Our results provide a fundamental understanding about the effects of surface terminations on the intrinsic stability and electronic properties of Nb₂C MXenes.