Sb、Sm共掺杂SnO2的电子结构与光学性质第一性原理研究

采用基于密度泛函理论的第一性原理计算方法,构建了Sm、Sb及Sm和Sb共掺杂SnO₂超晶胞模型,研究了经过几何优化后的各掺杂体系的焓变值、能带结构、态密度、电荷布居、介电常数、吸收系数、反射率等光电性质.结果表明：Sm和Sb的掺杂可以有效地提升SnO₂的导电性能,且Sb和Sm共掺杂体系的电学性能最佳. Sm和Sb掺杂还可以增加SnO₂在红外波段的电子极化能力和电子跃迁概率,提升了红外反射率,且共掺杂体系的电子束缚能力最强、反射率最高.这为SnO₂基光电材料的研制提供了一定的理论依据.     

First-principles studies of electronic,optical,and mechanical properties of γ-Bi_2Sn_2O_7

The detailed theoretical studies of electronic,optical,and mechanical properties of γ-Bi_2Sn_2O_7 are carried out by using first-principle density functional theory calculations.Our calculated results indicate that γ-Bi_2Sn_2O_7 is the p-type semiconductor with an indirect band gap of about 2.72 e V.The flat electronic bands close to the valence band maximum are mainly composed of Bi-6s and O-2p states and play a key role in determining the electrical properties of γ-Bi_2Sn_2O_7.The calculated complex dielectric function and macroscopic optical constants including refractive index,extinction coefficient,absorption coefficients,reflectivity,and electron energy-loss function show that γ-Bi_2Sn_2O_7 is an excellent light absorbing material.The analysis on mechanical properties shows that γ-Bi_2Sn_2O_7 is mechanically stable and highly isotropic.     

Electronic and optical properties of Au-doped Cu_2O:A first principles investigation

The Cu2O and Au-doped Cu2O films are prepared on MgO(001) substrates by pulsed laser deposition. The X-ray photoelectron spectroscopy proves that the films are of Au-doped Cu2O. The optical absorption edge decreases by 1.6%after Au doping. The electronic and optical properties of pure and Au-doped cuprite Cu2O films are investigated by the first principles. The calculated results indicate that Cu2O is a direct band-gap semiconductor. The scissors operation of 1.64 eV has been carried out. After correcting, the band gaps for pure and Au doped Cu2O are about 2.17 eV and2.02 eV, respectively, decreasing by 6.9%. All of the optical spectra are closely related to the dielectric function. The optical spectrum red shift corresponding to the decreasing of the band gap, and the additional absorption, are observed in the visible region for Au doped Cu2O film. The experimental results are generally in agreement with the calculated results.These results indicate that Au doping could become one of the more important factors influencing the photovoltaic activity of Cu2O film.     

BaZr0.5Ti0.5O3电子结构、力学和光学性质的第一性原理研究

在广义梯度近似（GGA）下,采用基于密度泛函理论的第一性原理方法对BaZr0.5Ti0.5O3的电子结构、力学性质和光学性质进行了理论计算．计算得到该晶体的晶格常数为4.145925 Å,且此材料是一种间隙的半导体材料,价带和导带都来源于Ba原子、O原子的p态和Ti原子、Zr原子的d态电子间的杂化;力学性质的计算得到：BaZrO3和BaZr0.5Ti0.5O3的晶体结构稳定,且BaZrO3晶体掺杂Ti元素后体系的硬度变大;光学计算结果表明BaZr0.5Ti0.5O3的静态介电常数为4.20,吸收主要集中在低能区,静态折射率为2.00,能量损失峰出现在11.59eV处．上述研究结果为BaZr0.5Ti0.5O3材料的设计和应用提供了理论依据．     

BaZr0.5Ti0.5O3电子结构、力学和光学性质的第一性原理研究

在广义梯度近似（GGA）下,采用基于密度泛函理论的第一性原理方法对BaZr0.5Ti0.5O3的电子结构、力学性质和光学性质进行了理论计算．计算得到该晶体的晶格常数为4.145925 Å,且此材料是一种间隙的半导体材料,价带和导带都来源于Ba原子、O原子的p态和Ti原子、Zr原子的d态电子间的杂化;力学性质的计算得到：BaZrO3和BaZr0.5Ti0.5O3的晶体结构稳定,且BaZrO3晶体掺杂Ti元素后体系的硬度变大;光学计算结果表明BaZr0.5Ti0.5O3的静态介电常数为4.20,吸收主要集中在低能区,静态折射率为2.00,能量损失峰出现在11.59eV处．上述研究结果为BaZr0.5Ti0.5O3材料的设计和应用提供了理论依据．     

OsSi2电子结构和光学性质的研究

采用基于第一性原理的密度泛函理论赝势平面波方法,对正交相OsSi₂的电子结构、态密度和光学性质进行了理论计算,能带结构计算表明它是一种间接带隙半导体,禁带宽度为0813 eV;其价带主要由Os的5d和Si的3p态电子构成;导带主要由Si的3s,3p以及Os的5d态电子构成;静态介电常数ε₁（0）=1543; 折射率n＝393并利用计算的能带结构和态密度分析了OsSi₂的介电函数、吸收系数、折射率、反射率、 关键词： 2')" href="#">OsSi₂ 第一性原理 电子结构 光学性质     

Structural, electronic, and magnetic properties of Co-doped ZnO

Density functional theory based calculations have been carried out to study structural, electronic, and magnetic properties of Zn1-xCoxO (x = 0, 0.25, 0.50, 0.75) in the zinc-blende phase, and the generalized gradient approximation proposed by Wu and Cohen has been used. Our calculated lattice constants decrease while the bulk moduli increase with the increase of Co 2+ concentration. The calculated spin polarized band structures show the metallic behavior of Co-doped ZnO for both the up and the down spin cases with various doping concentrations. Moreover, the electron population is found to shift from the Zn-O bond to the Co-O bond with the increase of Co 2+ concentration. The total magnetic moment, the interstitial magnetic moment, the valence and the conduction band edge spin splitting energies, and the exchange constants decrease, while the local magnetic moments of Zn, Co, O, the exchange spin splitting energies, and crystal field splitting energies increase with the increase of dopant concentration.     

Cu2Se电子结构和光学性质的第一性原理计算

采用基于密度泛函理论(DFT)的第一性原理的平面超赝势方法计算研究了Cu2Se的电子结构、态密度和光 学性质。能带结构分析表明Cu2Se为半金属、上价带主要由Se的4p电子构成下价带主要由Cu的3d电子构成静态介电常数为1.41折射率为7.74吸收系数在可见光范围内最小值为1×105cm−1且在高能区对光子的吸收减小为零其电子能量损失峰在26.84eV正好对应反射系数急剧下降的位置光电导率的波谷出现的能量范围与前面的吸收系数和消光系数的峰值和波谷出现的位置完全对应。     

Cu2Se电子结构和光学性质的第一性原理计算

采用基于密度泛函理论(DFT)的第一性原理的平面超赝势方法计算研究了Cu2Se的电子结构、态密度和光 学性质。能带结构分析表明Cu2Se为半金属、上价带主要由Se的4p电子构成下价带主要由Cu的3d电子构成静态介电常数为1.41折射率为7.74吸收系数在可见光范围内最小值为1×105cm−1且在高能区对光子的吸收减小为零其电子能量损失峰在26.84eV正好对应反射系数急剧下降的位置光电导率的波谷出现的能量范围与前面的吸收系数和消光系数的峰值和波谷出现的位置完全对应。     

TiO$lt;sub$gt;2$lt;/sub$gt;纳米管电子结构和光学性质的第一性原理研究

运用基于密度泛函理论的第一性原理方法, 系统研究了小尺寸锐钛矿相(n,0)型TiO₂纳米管(D<16 Å)的几何构型、电子结构和光学性质. 结果表明: 随着管径增大, 体系单位TiO₂分子的形成能降低, 体系趋于稳定; 在管径14 Å左右, (n,0)型TiO₂纳米管会发生一次构型的转变. 能带分析显示, TiO₂纳米管的电子态比较局域化, 小管径下(D<14 Å)其导电性更好; 随着构型的转变, TiO₂纳米管由直接带隙转变为间接带隙, 并且带隙值随着管径的增大而增大, 这是由于π轨道重叠效应的影响大于量子限域效应所导致的结果. 两种效应的竞争, 使得TiO₂纳米管的介电函数虚部ε₂ (ω)谱的峰值位置随管径增大既可能红移也可能蓝移, 管径大于9 Å (即(8, 0)管)之后, TiO₂纳米管的光吸收会出现明显的增强. 关键词： 2纳米管')" href="#">TiO₂纳米管 第一性原理 电子结构 光学性质     

不同价态Mn掺杂InN电子结构、磁学和光学性质的第一性原理研究

采用密度泛函理论体系下的广义梯度近似GGA+U平面波超软赝势方法,在构建了纤锌矿结构的InN超胞及三种不同有序占位Mn~(2+),Mn~(3+)价态分别掺杂InN超胞模型,并进行几何优化的基础上,计算了掺杂前后体系的电子结构、能量以及光学性质.计算结果表明:Mn掺杂后体系总能量和形成能降低,稳定性增加,并在费米能级附近引入自旋极化杂质带,体系具有明显的自旋极化现象.掺杂不同价态的Mn元素对体系电子结构和磁学性质产生了不同的影响.电子结构和磁性分析表明掺杂体系的磁性来源于p-d交换机制和双交换机制的共同作用,Mn~(3+)价态掺杂有利于掺杂体系的居里温度达到室温以上.与未掺杂InN相比,不同价态Mn元素掺杂后体系的静态介电函数显著增大,掺杂体系介电函数虚部和吸收光谱在低能区域出现了较强的新峰,分析认为这些新峰主要来自与费米能级附近自旋极化杂质带相关的跃迁.     

The elastic,electronic, and optical properties of PtSi and PtGe compounds

The structural, mechanical, electronic and optical properties of orthorhombic PtSi and PtGe were investigated using norm-conserving pseudopotentials within the local density approximation in the frame of density functional theory. The calculated lattice parameters and bulk modulus for PtSi and PtGe have been compared with the experimental and theoretical values. The second-order elastic constants were calculated, and the other related quantities such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocities and Debye temperature have also been estimated. The linear photon-energy dependent dielectric functions and some optical properties such as the energy-loss function, the effective number of valance electrons and the effective optical dielectric constant were calculated. Our structural estimation and some other results are in agreement with the available experimental and theoretical data.     

Structural, electronic, and optical properties of ZnOl_xSex alloys using first-principles calculations

The structural, electronic, and optical properties of binary ZnO, ZnSe compounds, and their ternary ZnOl_xSex alloys are computed using the accurate full potential linearized augmented plane wave plus local orbital （FP-LAPW ＋ lo） method in the rocksalt （B 1） and zincblende （B3） crystallographic phases. The electronic band structures, fundamental energy band gaps, and densities of states for ZnO1_xSex are evaluated in the range 0 〈 x 〈 1 using Wu-Cohen （WC） generalized gradient approximation （GGA） for the exchange-correlation potential. Our calculated results of lattice parameters and bulk modulus reveal a nonlinear variation for pseudo-binary and their ternary alloys in both phases and show a considerable deviation from Vegard＇s law. It is observed that the predicted lattice parameter and bulk modulus are in good agreement with the available experimental and theoretical data. We establish that the composition dependence of band gap is semi-metallic in B1 phase, while a direct band gap is observed in B3 phase. The calculated density of states is described by taking into account the contribution of Zn 3d, O 2p, and Se 4s, and the optical properties are studied in terms of dielectric functions, refractive index, reflectivity, and energy loss function for the B3 phase and are compared with the available experimental data.     

应变对钴铁氧体电子结构和磁性能影响的第一性原理研究

尖晶石型钴铁氧体(CoFe₂O₄)因具有良好的电磁性质, 广泛应用于计算机技术、航空航天及医学生物等领域. 特别是钴铁氧体薄膜在磁电复合材料中具有良好的应用前景. 本文基于密度泛函理论的第一性原理平面波赝势法, 结合广义梯度近似, 通过采用更接近于实验上外延生长的二维应变模型, 研究了钴铁氧体薄膜的结构稳定性、电子结构和磁性能. 结果表明: 在二维应变作用下, 反尖晶石结构的钴铁氧体比正尖晶石结构的稳定, 但是与平衡基态相比, 两者能量差减小, 这表明在应变作用下, 八面体晶格中的Co²⁺离子与四面体晶格中的Fe³⁺离子更容易进行位置交换, 形成混合型结构的钴铁氧体; 同时随着应变的增大, 钴铁氧体的能带带隙减小, 晶格中的原子磁矩发生变化, 但总磁矩变化不明显. 关键词： 尖晶石型钴铁氧体 第一性原理 电子结构 磁性能     

N掺杂SnO2材料光电性质的第一性原理研究

采用全电势线性缀加平面波(full potential linearized augmented plane wave method,简记为FP-LAPW)方法,基于密度泛函理论第一性原理计算分析N掺杂SnO₂材料,研究了在N替代O原子和N替代Sn原子情况下的电子态密度、电荷密度分布以及光学性质.研究表明N掺杂替代Sn较之N掺杂替代O原子的带隙要宽,都宽于SnO₂的本征带隙,且两种情况下N分别处于负氧化态和正氧化态,其介电函数谱也与带隙对应发生蓝移,从理论上指出     

First-principles study of structural,electronic and optical properties of ZnF_2

The structural, electronic, and optical properties of rutile-, CaC12-, and PdF2-ZnF2 are calculated by the plane-wave pseudopotential method within the density functional theory. The calculated equilibrium lattice constants are in reasonable agreement with the available experimental and other calculated results. The band structures show that the rutile-, CaCl2-, and PdF2-ZnF2 are all direct band insulator. The band gaps are 3.63, 3.62, and 3.36 eV, respectively. The contribution of the different bands was analyzed by the density of states. The Mulliken population analysis is performed. A mixture of covalent and weak ionic chemical bonding exists in ZnF2. Furthermore, in order to understand the optical properties of ZnF2, the dielectric function, absorption coefficient, refractive index, electronic energy loss spectroscopy, and optical reflectivity are also performed in the energy range from 0 to 30 eV. It is found that the main absorption parts locate in the UV region for ZnF2. This is the first quantitative theoretical prediction of the electronic and optical properties of ZnF2 compound, and it still awaits experimental confirmation.     

ZnTe结构相变、电子结构和光学性质的研究

运用密度泛函理论体系下的投影缀加波方法, 对闪锌矿和朱砂相结构的ZnTe在高压下的状态方程和结构相变进行了研究, 并分析了相变前后的原胞体积、电子结构和光学性质. 结果表明: 闪锌矿结构转变为朱砂相结构的相变压力为8.6 GPa, 并没有出现类似材料高压导致的金属化现象, 而是表现出间接带隙半导体特性. 相变后, 朱砂相结构Zn和Te原子态密度分布均向低能级方向移动, 带隙变小; 轨道杂化增强, 更有利于Te 5p与Zn 3d间的电子跃迁, 介电常数虚部主峰明显增强, 但宏观介电常数不受压力的影响.     

First principles study of electronic and optical properties of InAs

The electronic and optical properties of InAs in core-level spectra are calculated using the full-potential linearized augmented plane wave plus local orbitials (FP-LAPW +lo) method. The real and imaginary parts of the dielectric function ε(ω), the optical absorption coefficient I(ω), the reflectivity R(ω), the refractive index n(ω), and the extinction coefficient k(ω)are calculated. All these values are in good agreement with the experimental data. The effect of spin-orbit coupling on optical properties is also investigated and found to be quite small.      

Ni掺杂对ZnO磁光性能的影响

在掺杂浓度范围为2.78%—6.25%(物质的量分数)时,Ni掺杂ZnO体系吸收光谱分布的实验结果存在争议,目前仍然没有合理的理论解释.为了解决存在的争议,在电子自旋极化状态下,采用密度泛函理论框架下的第一性原理平面波超软赝势方法,构建不同Ni掺杂量的ZnO超胞模型,分别对模型进行几何结构优化和能量计算.结果表明,Ni掺杂量越大,形成能越高,掺杂越难,体系稳定性越低,掺杂体系带隙越窄,吸收光谱红移越显著.采用LDA(局域密度近似)+U方法调整带隙.结果表明,掺杂体系的铁磁性居里温度能够达到室温以上,磁矩来源于p-d态杂化电子交换作用.Ni掺杂量越高,掺杂体系的磁矩越小.另外还发现Ni原子在ZnO中间隙掺杂时,掺杂体系在紫外光和可见光区的吸收光谱发生蓝移现象.     

Structural,magnetic, and dielectric properties of Ni–Zn ferrite and Bi_2O_3 nanocomposites prepared by the sol-gel method

Ni–Zn ferrite and Bi_2O_3 composites were developed by the sol-gel method. The structural, magnetic, and dielectric properties were studied for all the prepared samples. X-ray diffraction(XRD) was performed to study the crystal structure.The results of field emission scanning electron microscopy(FE-SEM) showed that the addition of Bi_2O_3 can increase the grain size of the Ni–Zn ferrite. Magnetic properties were analyzed by a hysteresis loop test and it was found that the saturation magnetization and coercivity decreased with the increase of Bi_2O_3 ratio. In addition, the dielectric properties of the Ni–Zn ferrite were also improved with the addition of Bi_2O_3.